Iphone osi 8.0 upgraded. Now I can't find my home network. Help!

Just upgraded my iPhone to psi 8.0. Am able to find and stay connected to public wifi. Originally was able to find my home wifi. Now I'm not connected nor can I find my home network. I have tried reset via the phone, reboot of phone and reboot of router.

Thanks 11142007. I had actually tried what you suggested. But, it was only after I rebooted the router a second time that I was able to connect and, hopefully, stay connected. The key on the second router reboot was waiting at least 15 seconds to power it back up. I didn't do that the first time.

Similar Messages

  • I backed up my phone before updating the software, but now I can't find my pictures.  Help!

    I backed up my phone before updating the software, but now I can't find my pictures.  Help!

    Please pardon the intrusion…
    Hi, Chris! 
    Congratulations on advancing to Level 6!
    At the Water Cooler in the Level 6+ Lounge, we are throwing virtual confetti in celebration of your attainment of Level 6-dom. Would you care to join us at the Water Cooler?
    Towards the bottom of the index on the Apple Support Communities Home Page you soon will find the Lounge link available to you. It should work for you within the next 24 hours if all goes as it should.
    Hope to see you there soon!

  • Can't find my home network

    Greetings,
    I have tried searching this forum and the Apple support pages, and can't find a solution. My new iPod Touch can't find my home network. I have an AirPort Extreme base station and am using WPA/WPA2 Personal security. My MacBook Pro has no problem finding my network, and works flawlessly. My iPod Touch, on the other hand, can not. Even though my home network is not a closed network, I still tried entering the network name and password manually, and it still doesn't see it. I tried turning security off completely in my Base Station>AirPort>Wireless settings, and that didn't help, either. My iPod Touch does see one or two other networks in my neighborhood, but not mine.
    For the record, I am sitting less than two feet away from my AirPort Extreme base station, so I'm definitely within range, my iPod Touch can see other networks, so it would seem that it's antenna is not at fault, and my MacBook Pro sees and connects to my network without any problems, so it would seem my AirPort Extreme is set up properly. So what am I doing wrong?
    Any thoughts?

    Thanks Scott, that did it. Within range of everything is a wireless security camera that was creating an interference issue with my MacBook Pro and AirPort Extreme, and the only solution, other than disabling the camera, was to switch from 2.4 GHz to 5.0 GHz under Base Station>AirPort>Wireless>Radio Mode, which eliminated b/g compatible. At the time, that was fine because my MacBook Pro was n compatible. I see now that my iPod Touch is not. I tried switching back to b/g compatible, and the iPod Touch found my network right away, but the MacBook Pro lost it.
    Can't win for losing.
    The security camera has now been disabled, and both the iPod Touch and the MacBook Pro can access my network. I just won't be able to film the guy who tries to steal them.

  • I backed-up my iphone to my computer and now I can't find any of my music, does anyone know where it went?

    I backed-up my iphone 3GS to my computer and now I can't find any of my music.  I doesn't seem to be anywhere in itunes.  Can anyone help me?

    Backing up the iPhone to the computer won't transfer the music to it; to do that, you need to use the Transfer Purchases function. If you're looking for music already on the computer, search it for files with an extension of mp3, m4a, or m4p.
    (83190)

  • TS4006 My iPhone is lost, but its battery died. And now I can't find it. Please help me?!

    I lost my iPhone while I was outside, and it ran out of battery. So now I can't find it. Is there any way find my iPhone could still find it?

    No, sorry not a chance. The device must be powered on and connected to a data network for Apple's find my iPhone to work.

  • Mx922 not working after ink changed. now computer can't find the printer! Help!

    Computer said the ink was low. Changed the ink when it finally stopped because of an insufficent amount of ink. Now the computer can't detect the printer, let alone the ink change! I have read some other posts and tried to reset the drivers, that didn't work either. Now I can't even reinstall the drivers because the computer can't detect the printer. The printer is on and says that it's connected to the wireless network. It says my only other option is to connect via the USB, well Canon does not provide this model with a USB cord. So what now I have to go out and get a USB cord so that I can use my EXPENSIVE printer! That is why I paid more, so I wouldn't have to use wires!
    Please if anyone has any solutions that I have overlooked please tell me! I really need to print for work.

    I had a similar issue with my new Macbook Air. I ended up going and finding the bluetooth preferences (/Library/Preferences)  and deleting them. Then I restarted. This time around it could see the printer.

  • I achieved an e-mail by mistake, now I can't find it. Please help

    I achieved an e-mail by mistake, now I am unable to retrieve it. Please help.

    I replied over here: https://support.mozilla.com/en-US/questions/846167

  • I purchased ringtones now I can not find them.

    I purchased 2 ringtones yesterday. My iphone updated last night and now I can not find them anywhere. How can I find them and get them back on my phone?

    You may have lost them when the phone was updated unless you backed up first as you always should.  Ringtones cannot be downloaded a second time for free.

  • IPhone can't find any wifi networks

    I have an original iPhone. It originally ran on wifi networks and Edge, but for a while it has only worked on Edge. When I look under settings - Wi-Fi it says "Not Connected" and lists no networks. My MacBook is connected wirelessly via an AirPort and the wireless info on it lists at least 5 active networks in the area. I have tried toggling between Airplane Mode and not, turning off everything (including cable modem and AirPort) and then resetting network settings, resetting all settings, and erasing all content and settings. I have also tried "Other" under Wi-Fi Networks, but it can't find my home network.
    Is there just something wrong with the device?

    I have the same problem you did. Was your phone still under warranty or covered under Apple Care? My phone isn't under warranty anymore, so I'm just hoping that I'm not out of luck.

  • My airport can't find my wifi network.

    I have a Gateway 2wire that I came with AT&T Uverse.  It has been problematic at times, but now my iMac can't find the wifi network at all.  It doesn't make sense to me. Sometimes it works great, sometimes it keep dropping off.  Me and my wife both have iPhones, my iPhone found the network no problem, hers could not, so I entered it manually and that worked.  Then my iMac was working great on it, then all of a sudden, for no apparent reason, it stopped working and now it can't find the wifi network.  I can't even enter it manually.  The iPhones see it and work fine, my Wii see's it and works fine.  But my new blu-ray can't see it either. So why are some of my devices working fine with it, and others can't even find it.  I have worked with AT&T a few time and they keep saying it's not the 2wire.  I don't believe them, I have read to many reports of similar problems with the 2wire with AT&T.  Is there anything I can do to solve this.  I keep thinking I wan't to get an Airport Extreme and connect it to the 2wire, I have read that it is possible and will work, but I wan't to know why this router is visible to some devices and not others. Does anyone understand this.

    I'm not sure what you mean. You can't find the express to set it up.. or you can't find the network created by the express?

  • G50-80 can't find my wireless network at all?

    My brand new G50-80 can't find my home network at all. And no, the SSID isn't set to hidden. I've spent the whole night troubleshooting, and tried all of the suggestions on the intel website for the AC 3160. The router is D-link DIR-635. It is capable of 802.11n, g and b on the 2.4 ghz band.It is set to broadcast on g, b and n. I have tried setting it to n only but that didn't help. Using "WifInfoView" free software I can see lots of networks, on 2.4 and 5 ghz both, but not my home network.You'd think that it's the router that is the problem, but I have many devices connected to my router already, including an very old laptop, several phones, and a brand new tablet. I have never had such problems before. Seeing how many people have trouble with the connectivity of this card it's frustrating that Lenovo doesn't offer a free support phone number (in my country).  Unlike other people I wish a slow signal was the only problem, as I can't see the network at all. I have tried turning off password.I have tried the latest drivers from both intel and lenovo.I have tried turning off bluetooth in device manager.I have tried turning off power saving features.The router is discontinued but has the latest firmware. And as mentioned, other devices can connect to it. Is there anything more I can try other than just returning this thing?

    UPDATE!!! If I select "only 802.11g" on the router I can connect.
    A bit strange. I'm open to any suggestions, but at least I can connect now.

  • My iPhone 3GS was recently stolen.  I can't find the box and it has not been synced to my computer in a long time.  I just use it as an iPod now.  I have the IMEI

    My iPhone 3GS was recently stolen.  I can't find the box and it has not been synced to my computer in a long time.  I just use it as an iPod now.  I have the IMEI but not the serial number.  Is there a way that I can get the serial number using the IMEI number.  Thanks

    What To Do If Your iDevice Is Lost or Stolen

  • Upgraded drive, now Lightroom can't find my main catalogue

    I have a separate data drive in my system. When it filled up, I upgraded to a larger data drive. The person who set it up for me transferred all the dotage to the new drive. Now Lightproof can't find my main catalogue although for some reason my collections are listed.
    Message was edited by moderator: fixed formatting and title, but not spelling

    If you know where the catalog is located you can browse to that folder and double-click on the catalog. Lightroom will open the catalog and you can continue.

  • I synced my iPhone pictures onto my laptop and i can not find them now, i synced my iPhone pictures onto my laptop and i can not find them now

    i synced my iPhone pictures onto my laptop and i can not find them now, i synced my iPhone pictures onto my laptop and i can not find them now

    You mean you imported or transferred photos from your iPhone's Camera Roll with your computer?
    If so, what did you use on your computer for the import?

  • TS3376 Can nowaday we can use playnsound or send message on find my iphone ? I use it before but now I can't find the bottom..

    Can nowaday we can use playnsound or send message on find my iphone ? I use it before but now I can't find the bottom.. So i want to ask that did it still have or can use? If yes how to use ?

    Yes.  See http://help.apple.com/icloud/#mmfc0f19b5.

Maybe you are looking for

  • MacBook Pro 8,2 - Enabling Intel GPU results in blank screen

    I am trying to install Arch on my MacBook Pro 8,2.  I've followed the wiki page, and I should note that I have successfully installed Arch on here before (about 4 months ago) and it worked then.  However, this time I have made several attempts and fa

  • Purchase Order Open quantity calculation.

    Hi All.. I would like your help in finding out the logic behind calculating the open quantity for a given line item of a purchase order. Iam aware that i should go to the EKBE table to see purchase order history. Can someone tell me what are all the

  • How to create an internal table with a types structure?

    Hi experts, I've 3 internal tables with the same structure, I think I could put a type structure and put that type inside the body of the internal data, is this possible? If true, how can I put that? Example: TYPES: Begin of type_s,                pe

  • Column header in all the pages

    Hi all, I have designed the Account Statement report for banking application. In this report i want to show all the credit and depit history for the particular account. So that i have grouped this report based on account number. In this report i am n

  • TS3694 My phone is in recovery after a number of events being stolen and dropped, not sure which wiped it! but i can't restore it,

    My phone won't restore and keeps coming up with error 21 . My security settings on my home computer haven't changed and the phone was only restored about 2 months ago when my daughter gave me the phone. I have tried disabling my anti virus and stuff,