IPhone pictures do not seem to be high resolution- can I change settings?

Hello.
I am at the beach.  I have my iphone and my DSLR.  When I am taking pictures with my iphone they do not seem to be high resolution.  The tones do not gradually change and when the pictures enlarge (on my phone) they seem somewhat pixelated. When I email them 'actual size' they are around 600-800kb which seems small to me. 
Is this normal or has a setting been changed on my phone?  I have never used the iPhone for its camera but has always read great things about it.  It seems like I must be doing something wrong.
Thanks in advance

That is confusing, I cannot find any camera controls in Settings or in the Camera app other than HDR...and my photos range from full image at 2.4 MB on down when sending by email.  So my raw size is 2.4 MB for an iPhone 4 with iOS 7.0.6.
Have you tried a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears, to see if that resets things?  Long shot but worth a try as it does not harm any data or content.

Similar Messages

  • After navigating (sometimes downloading pictures, sometimes not) for approximately 10 minutes, I can no longer see contents of drop down menues, then Firefox freezes up and I have to use Ctrl/Alt/Delete to end my internet experience.

    After navigating (sometimes downloading pictures, sometimes not) for approximately 10 minutes, I can no longer see contents of drop down menus, then Firefox freezes up and I have to use Ctrl/Alt/Delete to end my internet experience.
    == This happened ==
    Every time Firefox opened
    == After upgrading to 3.6

    Step by step, how did you arrive at seeing this agreement?

  • HT1695 IPhone 4 could not capture remote Wi-Fi but can capture the network from close range to Ataatjos meter

    IPhone 4 could not capture remote Wi-Fi but can capture the network from close range to Ataatjos meter

    I tried the process and was happy to note that there was some process that I managed to start because the process did start ...
    However to my disappointment,  landed back at the same status which says
    We're sorry, we are unable to continue with your activation at this time.
    Please try again later, or contact customer care
    I was using a GEVEY sim unlock with iOS 4.1 since (almost) last 2 yrs now in India on Vodafone. But as Apple designed it, there were several apps including Whatsapp, Facebook, Gmail and LinkedIn that stopped functioning due to the iOS updates and the subsequent (I guess 'mandatory' App updates). Finally yesterday I thought of updating to the iOS 6. As soon as I did that, I have been left with no choice but to see the above message.
    The process by jhidrowoh starts corectly but iTunes doesnt give you the option of restore only ... it is forcefully clubbed with update and the button that is displayed in the dialog box that appears on pressing 'Restore' in teh recovery mode, shows 'Restore and Update' and as soon as the iPhone is restored, it automatically updates the iOS as well to iOS 6 and hence leaves you hanging in the stale situation.
    Guys ... Need the data desperately ... Can anybody please help???

  • My iphone 4s is not syncing with i tunes.how can i solve it

    my iphone 4s is not syncing with i tunes.how can i solve it?

    If it is not recognized in Windows, follow this article:
    iOS: Device not recognized in iTunes for Windows
    If it is shown in the device list in iTunes and does not sync, check your security software settings:
    iTunes for Windows: Troubleshooting security software issues

  • My new Iphone 6 is not recieving any calls and i can not access my voicemail. please help

    my new Iphone 6 is not recieving any calls and i can not access my voicemail. I already attempted the items on the the troubleshooting site.
    Currently at work, and can not make it to a Verizon store at this time. Was wondering if there was something i can do to my phone from my office at this time.

        vzw-tempname-1e9c6a9c-9da4-4a97-8eed-b73d6a88f5b3,
    I am sorry to hear you are having issues with your new iPhone. We want you to be able to enjoy your device. Are you having any issues with text or data on the device? Is the device showing signal bars? Have you been able to use th device at all since your received it?
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • Someone stole my ipod i tryesomeone stole my ipod i tryed find my iphone but its not connected to the internet what can i do??d find my iphone but its not connected to the internet what can i do??

    some one stole my ipod touch i tryed fin my iphone but its not connectes to thei nternet what can i do??

    If you have previously set up/configured the FindMyIPod service in the iPod's settings, you might be able to track it that way by going to www.icloud.com and signing in with your Apple ID.  Then click the FindMyiPod icon.  This also requries that the iPod Touch be still powered on, connected to a nearby Wi-Fi network whose location has been correctly entered into Apple's location database) and not have been restored by somebody else who my have located the device.
    Otherwise, I'm afraid you are out of luck and will need to look for it as you would anything else you lose. You should report the lost item to the local authorities and change any and all passwords to any accounts you may have set up or accessed with the device. Apple can do nothing to help.
    Reporting a lost or stolen Apple product
    B-rock

  • Iphone 4 does not have app store on it, can it be downloaded

    my son's iphone 4 does not have the app store icon, can it be added?

    Check his other apps folder or home screen.
    Go to settings - restrictions and make sure it's not restricted.
    If the above doesn't work, then go to settings - general - reset - reset home screen layout.

  • I'm using a TravelSIM to make calls home to Australia on my iPhone 4S while I'm overseas. Do I need to change settings, or do anything else, to make sure I don't pay too much?  eg turn off push data - what else?

    I'm using a TravelSIM to make calls and texts home to Australia on my iPhone 4S while I'm overseas. Do I need to change settings, or do anything else, to make sure I don't pay too much? 
    I have advice to turn off push data and don't use Google maps 
    Are there other things I should do so my costs will be kept low?
    thanks for any answers from experienced iPhone using travellers!
    kind regards,   Di

    It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
    Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
    At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...

  • Just downloaded iBooks on my iPad and its not accepting my security answers how can I change that

    Just downloaded iBooks on my iPad and its not accepting my security answers how can I change that?

    Delete the data for the guest network on the iPhone, iPad, etc.
    Log on to the "Guest" network
    On the home screen, tap Settings, tap Wireless, tap on the name of  your wireless network, tap Forget This Network.
    Now log onto the network that you want to use, and the iPhone / iPad will connect to that network automatically in the future.

  • All pictures I take come out tinted red.  Can I change some settings to correct this?

    All pictures I take come out tinted red.  Can I change some settings to correct this?

    there is no settings of this sort
    Do you have a case on ?

  • HT4859 I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

    I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

    For a "hard" restart of your iPad just press the home and power button at the same time and hold it for at least 10-15 sec. until it restarts.

  • Emailed photos from iPhone using ios7 being formatted to bmp. How can I change to jpg?

    Emailed photos from iPhone using ios7 being formatted to bmp. How can I change to jpg?

    I just solved this issue! Here's the solution in case anyone else is experiencing the same problem: I had him link his phone number to his Apple ID by adding his his phone number to his contact in his Contacts List. After that, messages sent to his phone number are blue.
    I'm guessing his phone number was disconnected from his Apple ID when he somehow toggled off iMessage.

  • HT3610 my incoming mail server is not accepting my password. How can I change it?

    my incoming mail server is not accepting my password. How can I change it?

    Contact AppleCare and speak to someone in account security.

  • When i try to download a program, it open Creative Cloud, and it show me a wrong email adress. That's not one of mine. How can i change this email adress?

    When i try to download a program, it open Creative Cloud, and it show me a wrong email adress. That's not one of mine. How can i change this email adress?

    Hi,
    Delete opm.db from the location given below(Please close the CC Desktop App before these steps).
    For Mac:
    ~/Library/Application Support/Adobe/OOBE/opm.db. Launch CCD and try to sign in.
    Enable hidden user Library: Access hidden user library files | Mac OS 10.7 and later.
    For Windows:
    [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
    Thanks,
    Saurabh Rai

  • I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?

    I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?

    I guess you mean one of the resume templates.
    What "format" have you saved your finished resume in?
    The only formats a Windows user will be able to open are .doc (Word), .pdf and rtf. The 1st 2 are usually the best.
    There is no Windows version of Pages.
    Peter

Maybe you are looking for

  • BEA-002900 Initializing self-tuning thread pool   HANGS

    Hi All, Trying to start a WLS 10.3.5 instance using jrockit and it is hanging on: Apr 6, 2013 2:08:39 AM CDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool> end of trace I took a thread dump and see this: "[ACTIVE] ExecuteTh

  • How can we achieve the outer join in physical layer

    Hi, Can any one can suggest ,how do we handle the outerjoin criteria in obiee. thanks B.kumar

  • Access time capsule remotely from windows 7 os. Please help!

    I have enabled net/bios in the network prefs in windows but to no avail. It works fine from a vista os but I cannot seem to figure it out from windows 7. Will someone please help me. I cannot find it anywhere on the web. I am good at finding answers

  • Local printer not showing up in RDP session

    Is the user RDP using the RDP shortcut saved or creates a new connection everytime? if using the save connection, have you tried deleting it and re-creating it and checking the local resources option again. It should show up a redirected printer in R

  • Disabling a cell or a row in a matrix

    1.is there a way to disable a cell in a matrix? 2.is there a way to disable a row in a matrix? 3.is there a fast way to disable all the controls on a form as a result of a checkbox change? rgds Hagai