Iphone plugged into computer no sound
When I plug my iphone into my computer I don't get any sound from the iphone speaker. I do get sound if I plug in my headphones however. I've had my iphone for almost a year and I can't remember if this has always been the case. Is it normal or a bug? If normal, why?? I miss texts and calls because of it. If a bug, how do I fix?
Thanks!
Disconnect the phone from the Computer and Try a Reset... Nothing will be Lost...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Similar Messages
-
IPhone will not charge when plugged into computer
My phone was not working, and so I took it to the apple store nearby. Here were the problems:
-error message saying "this device not made to work with iPhone"
-would not charge when plugged into computer OR wall charger
-person on other end of phone calls said i sounded really far away and had trouble hearing me
-when i shut it off, it restarts itself immediately
-cant do a manual reset holding the power and center buttons at same time
-when plugged into the computer, mouse freezes, and a message appears saying ""power surge on hub port A usb device has exceeded the power limits of its hub port."
At the genuis bar they told me they cant help me cause that little water damage indicator inside the headphone hole is pink instead of white! I have never ever ever ever ever EVER gotten my phone directly wet. The only thing i could think of was the humidity in the bathroom when I'm taking a shower, and using the timer to use hair remover on my legs lol. But i think this is totally unfair, they wont repair my phone, or even really look at it because of this supposed water damage. My phone has worked fine up to this point, and the thing that happened that started all of this is when i dropped it about a foot off the ground in a DRY parking lot.
Is there any way they will replace my iphone at no charge?Well don't give up try again maybe your luck will change when you go back up there,let somebody else look at your phone not the same person that told you that.I would get a second and a 3rd option about my phone.When you go back don't even tell them what somebody already told you up there ones.
And after the 3rd time I'll ask them well can they send your phone off to be fixed,It might not be nothing wrong with your phone it might be just they eyes playing tricks on them.Cause I promise you I know my phone had gotten some water in it cause I was sitting on the porch one day me and about 6 other people one of my cousin came out and through a bucket of water at my brother and I was sitting right on the side of him.And when I say my phone look like I than gave it a bath witch when they did that I had already had call the Apple store and told them something was wrong with my phone.And they had gave me appt to come up there,so I went to the Apple store I wanted say two day's latter after I made the appt to let them see my phone but my cousin and brother was playing with that water the day before I had to go so I guess that's why I was mad cause I was going to get other phone the next day after apple look at my old phone.So even with all that they still gave me other phone and I don't see how I didn't have no water in my phone cause of how much water they had through on my phone.
I guess I was luck cause if they would have told me that I would have freaked out so badly.And the reason why cause I wouldn't had my phone for five days and for them to tell me they couldn't do something oh yea they would have done something cause I would have went to jail that day for tearing up something in the store that worth my 400 and something dollars I spent on my phone and it would have bent one of them computer that would have bent history.
But I'M telling you,you going to be okay don't give up.Make you other appt and see what they say. -
Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.
Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem! -
with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.
Having same issue here:
https://discussions.apple.com/message/19043181#19043181 -
ive created an apple id account and my iphone 3gs is plugged into computer. What do i do now? screen on phone still says connect to itunes
Is the iPhone connected to iTunes - available under Devices in the iTunes source list?
-
Help
Itunes does not recognize my iphone when plugged into computer it recognizes it as a still camera. I have installed the lastest version of itunes and gone through the troubleshooting tips and still have the same problems.Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.
-
my iphone phone wont turn on and when i plug into computer it wants to restore then gets stops at the 'waiting for iphone' what do i do? not jailbroken not damaged? HELP!!!!!
i have, its connected to my sisters computer,it starts to restore then says there was a problem downloading the software for the iphone, the network connection has timed out. what does this mean?
-
my iphone has a usb cable with a itunes symbol and when i plug into computer it wont show up on itunes
Well, you don't say what computer OS you are using, so here is information on both.
Windows: http://support.apple.com/kb/TS1538
Mac OSX: http://support.apple.com/kb/TS1591 -
iPh 4s plugged into computer iTunes to update. When I came back to ck on it msg said ph not found. Ph showed plugin w/arrow pointing to iTunes symbol. Turned ph off/on but same thing on screen. It is frozen. Now what?
Additional comment from Carl 37: Phone is locked up with screen showing usb cable end with arrow to iTunes logo. What can I do to regain use of phone?
-
My iPod itouch when plugged into computer just flashes the apple logo otherwise it just won't start. Try to reset -nothing.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPhone plugged into laptop interferes with Bluetooth mouse
iPhone 3GS, iOS 4.1
iTunes version 10.0.1.22
Laptop is an HP Envy 15 running Windows 7 Pro 64-bit
Mouse is a Microsoft Bluetooth Notebook Mouse 5000
The mouse works fine when the iPhone is sitting next to the laptop, but not plugged in, so I don't think it's EMI/wireless interference. When I plug in the iPhone to the laptop to charge it or sync it, the mouse begins acting funny. There is momentary interference (for maybe a second about every 5 seconds) where the cursor will stop moving and the buttons on the mouse won't do anything. If I go into iTunes and click on the iPhone under devices, the mouse will sometimes lock up and eventually disconnect (I know it disconnects, because I have my laptop's touchpad set to turn back on after the wireless mouse disconnects).
As far as I know, this only happens with the iPhone plugged into USB. I don't have many other USB devices to try it with. Though, I did try it with just a USB DVD drive plugged in, and the interference did not occur. Once the iPhone was plugged back in, the interference resumed.
I need to be able to charge my work phone when at work, or I will miss important calls. Also, I need the mouse for better maneuverability since I use this computer to design circuit boards (CAD is impossible with a touchpad only).
Any suggestions, other than the usual driver updates/reinstall (I've done that several times already)? Any help is appreciated.
-TomI noticed the same kind of interference that you're experiencing on my logitec wireless laser mouse. On top of that, I only experience the lag while my iPhone is plugged in AND while iTunes 10 is open (even though as of right now iTunes isn't even detecting my iPhone) I gave up trying to fix it myself.
All in all iTunes 10 is full of bugs <.< -
My Iphone5C shows plug and arrow pointing to Itunes symbol but when i plug into computer it says device not recognized
That screen is telling you the iPhone has gone into recovery mode, and you need to use the recovery mode instructions in http://support.apple.com/kb/HT1808 to attach to a computer running iTunes. Summary of instructions:
-
i have an iphone 4, ran out of battery and is now locked in itunes, displaying the usb plug into computer.is this an easy fix, regards matt.
Hi matt1874!
I have an article for you that should be able to help you troubleshoot that issue with your iPhone. That article can be found here:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Hope that helps! Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Had my ipad plugged in to charge all night went to turn it on this morning and can't turn it on. plugged into computer and didn't sync either. What do i do?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom -
HT4236 I can't see any photos when ipad is plugged into computer.
I can't see any photos in itunes when ipad is plugged into computer.
Everything else shows up.I have a similar problem Win 8 iCloud 3. Shared photostreams sync ok and my photostream syncs on other devices. Interesting enough, when I access photostream through the "my computer" option on Apple TV I see a whack of pictures that don't appear on any of my IOS or Windows Photostreams.
Maybe you are looking for
-
Can I set up two iTunes accounts on one computer using one email account?
My spouse wants an iPhone. Can we use the same computer and email address to set up a second iTunes account?
-
Final Cut Pro X 10.0.5 Create Storyline with Audio-Only Clips in order to add crossfade transition.
Final Cut Pro X version 10.0.5 – How to Create Storyline with audio-only clips. I'm following exercises in Diana Weynand's Pro Training Series, and this function is greyed out. Trying to create crossfade transition. New Compound Clip can be activated
-
Need Help & Urgent Response --Menus
Hi, I am facing problem in manipulating menu (PL/SQL-code). Wanted to... 1. I ve specific entities assigend specific users 2. On the basis of specific login user replacing the menu 3. Using GLOBAL variables transfering user id to calling forms Proble
-
I have a machine with a Sun Blade 2500 mohterboard in it. When I boot the machine, I receive a warning: Warning: Failed to open device(/pci@1e,600000/isa@7/i2c@0,320/gpio@0,30:pca9556_0), rv(6) I believe the problem is caused because I have no sound
-
Retrieving cookies when logging into java forums through a java application
Hello -- I am currently working on a spider application that will have the ability to login to sites of interest and then begin crawling. I thought an easy place to start would be to login to java forums. However, I have run into a bit of a snag with