Iphone quartz border around line

Hello,
what's the best way to draw a (solid black) border around a line in quartz for iphone? I'm drawing lines on streets on a map and if the line is yellow (which is a legit use case), it blends in with the street color. One thing I could do is lay my lines over a little thicker black line, but this doesn't sound very efficient.

Why not draw the path that you're using with a black fill and a slightly wider line-width (even 0.1 units wider), and then draw the street line on top of that?

Similar Messages

My iphone 6 has a black border around the display

hey guys today I noticed a black border around my iphone 6 display, its a thin black line all around the display. Thanks.

What do you mean by "extend the display"? If you mean "magically make it bigger", then no.

When I have a border around a group of cellsand remove it, it also removes the grid lines. When I go to print the sheet, there are blank spaces where the border had been. I'm sing a MacBook.

When I have a border around a group of cell, how do I remove it. If I outline the cells again and then show in the Inspector NO BORDER, it removes not only the borderbut when I go to print it also the grid lines.

What application are you using? Numbers? Excel? Something else?
For help with Numbers spreadsheets go to this forum.
If you are using Excel, Microsoft has a forum to help you.
If it is something else, let us know what and we will try to point you in the right direction.
Best of luck.

Iphone has a black line around the "swipe to access" box and i can't get it to turn on"

iphone has a black line around the "swipe to access" box and i can't get it to turn on"

Triple press the home button.

I have an iPhone 5 and just recently when I get the camera button and it opens there is a black border around the screen and the screen is small and I don't know what I did to cause it or what to do to make it go away anyone help

I have an iPhone 5 and just recently when I opened the camera there is a big black border around the screen causing the picture itself frame to be smaller I don't know what I did to cause this or what I can do to make it go away can anyone help/

First off, try a reset of the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, see if the problem persists.

How do I put a property line border around ariel photo of a property?

I'm trying to put a red border around a property in an black and white ariel photo. I can do it with the pencil tool but I want to do it point to point for straight lines?

Butch, I agree with you.
I prefer to utilize the line tool because it facilitates color selection for the outline, which Hank needs, and also there is a style selection option. In addition, as one uses the tool incremental layers are generated. If needed, one can then make adjustments with the move tool, or delete a layer and replace it with a correction.
Both get the job done - personal preference.
Ken

Hey i need help my iphone 5 all of a sudden has like an all white border around it and sometimes it has a blank screen what seems to be the problem?

hey i need help my iphone 5 all of a sudden has like an all white border around it and sometimes it has a blank screen what seems to be the problem?

Try turning off the following:
Settings>Mail, Contacts, Calendars>Push>OFF
Settings>Notifications>Mail>Gmail>Notification Center>OFF
Settings>Mail, Contacts, Calendars>Fetch New Data>Off

AT&T has rules for the iPhone 3G S launch - Lines allowed to form starting at 7am

AT&T has rules for iPhone 3G S launch - Lines allowed to form starting at 7am
Perhaps AT&T has learned some from the troubles with iPhone past launches and they are going to try to make the experience better by settings some rules this time around. While AT&T is calling these “rules” guidelines, we think it really is nothing more than an effort to make a success of what the company hopes is one of the biggest tech event launches of the year.
AT&T stores will receive inventory in time for the actual launch on June 19th. AT&T is already accepting pre-orders online as well as in stores. This change is key this time around because those that choose not to place a pre-order could be left out in the cold. From our understanding, pre-order customers will be given priority.
The way that it will work is when the AT&T store opens, customers in line will then be split into two lines, with those already having a pre-order placed in one line and those who don’t have a pre-order placed in the other line. Pre-order customers will be able to start receiving their new iPhone 3G S starting shortly after 7 A.M., while those without a pre-order will have to wait until the store’s official regular opening time. Upon the actual regular opening time of the store, the two lines will then be merged into one line again. Apple retail stores will also be an option as they will open at 8 A.M. on launch day, but only those that pre-order from the Apple retail store will actually be able to pick up their phones early.
As for the pricing, current AT&T customers that have had a contract with AT&T for at least 18 months will be able to get the new 16GB model for $199 or a 32GB model for $299. If you happen to be a current AT&T iPhone owner, but have not gone 18 months on your current contract, you will be able to pick up a new iPhone 3G S but will have to pay between $399 to $599, depending on how much time is left on your current contract and whether you want the 16GB or 32GB model. From what we understand, you will have to agree to another 2-year contract to get the iPhone 3G S this time around.
The only actual possible loophole in this deal is to cancel your current AT&T contract and pay the $175 early termination fee and then wait three months. After the three months have lapsed, you can return to AT&T and then get new customer pricing, which would save you $225, but you have to endure a three-month wait.
While the pricing and the options might make some AT&T customers unhappy, it is what it is. The bottom line is that the iPhone is still so hot, AT&T knows that people will pay what it takes to sport the new version if they are a big iPhone fan. According to our sources, AT&T should have enough inventory to more than cover the pre-orders, but beyond the pre-orders it is difficult to say if they will be able to meet the demand on launch day for additional units. Our advice is that if you want to have one on launch day, you had better get your pre-order in soon.
Source:
http://www.fudzilla.com/content/view/14181/1/

I believe if you are a current AT&T Customer and wish to ADD a new phone to your account you will be able to get the new 16GB model for $199 or a 32GB model for $299. I went through
http://www.apple.com/iphone/buy/
and selected "Add a new line to my existing account" and was shown pricing as $199 for 16 GB and $299 for 32 GB.
Hard to see this as any benefit unless you need an additional line on an existing account, which I happen to (I bought a new "additional line" 3G just before the 3GS was announced, and will fit into the "return" window)

I have never used my mac for desktop publishing before and am having some problems. This sounds really dumb, but I can't figure out how to put a border around a text box. Also, how do you edit the border, i.e. border color, thickness, etc. Help!

I have never used my mac for desktop publishing before and am running into some real problems. How do you put a border around a text box? Can you edit the border - color, thickness, etc.? Help!

I think the best solution is to read Pages documentation, go to Help and you have a long list of options. Pages is capable of quite sophisticated things, some features are above Nisus or Mellel, so it is not so simple to summarize things in a few lines.

How to make a border around text?

In my latest FCE project, I made a solid color matte clip (dark blue) to set below my titles to give the text a colored background (these titles are not overlaid on video clips, so without the colored matte, the background would be the default black of the Timeline, and I don't want black).
Anyway, so here I have this nice white text overlaid on a dark blue background, looking pretty good, and now I'd like to put a decorative rectangular white border around the text, a thin white line, or a maybe a double white line, sort of like a pinstripe, to elegantly (I hope) enclose the text in a sort of box.
What would be the best way to create such a border? Could I make one on a transparent layer in Photoshop (I have CS-2,) and then import it into FCE as a clip to set the text above? Or is there a simpler way to do it, within FCE?
Any suggestions would be welcome.
Tom

The only option I see on that PieroF webpage is to download it as a .zip file. When I download it and double-click on the icon, I get that zoom-out effect like it's opening, but it doesn't open. Dropping its icon onto the Stuffit icons doesn't do anything either.
Anyway, I just experimented with masking off a colored matte in the way you mentioned, and I think I see how to do it: create a color matte and then lay two masks on top of it, an inner one and an (inverted) outer one, which leaves only a thin line of the color matte still showing. Is that it? For a double pinstripe, I suppose I would do that twice, i.e. create two masked-off mattes, one a little larger than the other, and stack them up on the video tracks?
It's more trouble than the Piero frame generator, no doubt, but effective. Thanks!
Tom B.

Dynamic Border around image

hi there,
i have a main flash movie (main.fla) which has images placed
on the screen.
Each image has an invisible button placed on it.. (ie: the
button has only
the hitarea defined and no rollover, down etc.)
NOTE: that the images are different in sizes. hence they have
different
width and height.
I tried making a movieclip of 200 x 200 in size with a 1px
border around it
and dynamically making it adjust to the width and height of
the images. BUT
i seem to be hacing the following problem-
1) for images that are larger in size than the border
movieclip.. the border
tends to thicken.
2) for images that are smaller than the border movieclip..
the border tends
to get more thinner
Required-
OnRollover of an image.. it should have a border around it,
inorder to
highlite the selected image. Lets say, a 1px border and red
in color. How do
i achieve this?
Would really appreciate if someone would provide a simple
code to achieve
this as i am not used to programming.
Please help..
thanx

yep, thats cause when you stretch your mc the lines will
stretch with it.
if you are using flash 8, use the 9slice guides.
for the mc that contains your border go into the preferances,
and you will find a check box for the 9slice thingy (technical
term)
check that, then double click on the library symbel to edit
it.
you will find flash has drawn four dashed lines.
move these so that they mark the inward edge of your borders.
basically the area inside these guides stretches normally
the corners don't stretch
and the edges stretch either horizonally or vertically
for more info look in the help.
oh, and don't transform (rotate skew etc) your mc once on the
stage or you'll loose your slices...
best

Border around Artwork in Cover Flow, iOS 4.3

First of all: please excuse me for my english; it's not my native language.
After updating to iOS 4.3 (Mac OS X 10.6.6; iTunes 10.4), I had some problem with some artworks, so I removed and added all my music to my iPhone 4. Suddenly, all the artworks in Cover Flow has a thin (or thick, depending on the form of the picture), black border around them. In "Now playing mode", artwork also looks like they are in low resolution – even if they aren't.
Anyone familiar with this problem? Can I fix it, or will it be addressed and fixed with an upgrade?

I got the same issue. it didnt used to have this before. now all the new albums have them. how can we fix it?

Border around image link?

Hello,
I created this HTML email and only in gmail there is a purple border around the header link? I have the border setup to O. It looks great in hotmail and outlook though. Do you know why this would happen?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Guardian Credit Union</title>
<style type="text/css">

</style>
</head>
<body>
<table width="625" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td border="0"><a href="http://www.tellgcu.com/{{Purl}}"><img src="http://208.69.110.181/GCU_919743-site/images/emailHeader.jpg" alt="Urgent deadline regarding your debit/ATM card services. To keep the overdraft service you already have, we need to hear from you." /></a></td>
</tr>
<tr>
    <td><p class="style1">Dear {{CustomerName}},<br><br>In order to continue giving you the same Overdraft Services you are receiving today, we will need your permission by August 15th.</p>
      <p class="style1">Overdraft Services allow us to cover debit card purchases or ATM withdrawals for you when the transaction is more than your balance. </p>
    <p class="style1">You can choose to continue receiving that service, or to have the debit card purchase declined at the cash register. <a href="http://www.tellgcu.com/{{Purl}}">Click here to find out more!</a></p></td>
</tr>
<tr>
    <td><br><p class="style1">Sincerely,<br><br><br>Guardian Credit Union</p><br><br><br><font size="-2pt">You will be charged a paid item overdraft fee of $32 for each overdrawn item created by Debit Card purchases or ATM withdrawals. The amount of any overdraft item including our paid item overdraft fee of $32 shall be due and payable upon demand, but if no demand is made, no later than 30 calendar days after the creation of the overdraft. We may refuse to pay an overdraft item at any time even though we may have previously paid overdrafts for you. For example, we typically do not pay overdraft items if your account is not in good standing or if based upon our review of your account management, we determine that you have too many overdrafts or are using the service as a regular line of credit.</font></td></tr>
</table>
</body>
</html>
THanks,
Melanie

i know im a bit late on responding but i think what you need to do mshef534 is to put the code a img {border: 0px;} within the image ref itself i.e.
<a href="http://www.facebook.com/search/results.php?q=Samuel+Emerton&init=public#!/profile.php?id=1 00000235960932"target="_blank"><img src="facebook.png" width="43" height="43" a img {border: 0px;}/> and that should do it this worked for me happy htmling

White Border Around LCD

Hey guys,
I noticed this a couple weeks ago when I was on vacation. When my iPhone screen has direct sunlight shining on it, it has a white/gray border around the LCD (e.g., when the phone is unlocked on the home screen). I was wondering if this was normal, cause I never really used my iPhone in direct sunlight before. Can anyone test this out to see if their's is the same? Thanks!

Yes, mine is same as yours.
It seems to be the edge/frame portion of the screen that is not usable.
I think it's kind of unique. But not at all odd or bad looking. (This is only noticeable in direct sunlight.)

Border around image links

What the heck is it with a blue border around image links in
CS3???? I discovered I can get rid of it by setting the border to 0
in properties but what a pain. I also noticed tables have a 1
border by default. I'm sure there is a place to change the default
but I can't find it.
Any suggestions?
thanks,
CJ

On Fri, 1 Jun 2007 13:11:16 +0000 (UTC), "SeaJaye"
<[email protected]> wrote:
>Win,
>I like the way you think. For those of us who are cake
baking challenged, could you put up a recipe for said cake?
>thanks,
>cj
Sure. This set of stuff:
*zeroes out the margins and paddings
* guarantees a vertical scrollbar (so no jumping between
short and
long pages)
* establishes colours and fonts etc. for the tags I tend to
use
* gives me a way to float images left or right
* defines a tag that I can use to clear floats (the hr tag,
in this
case, since I never use an hr as a visual element: I always
define
borders when I need them)
* styles the form and form elements
I customize these to suit.
/* CSS Document */
margin: 0;
padding: 0;
html {
height: 100%;
margin: 0;
padding: 0;
body {
min-height: 101%;
font: 100.01%/130% "Trebuchet MS", Verdana, Helvetica,
sans-serif;
color: #000;
background: #4f865b url(../images/bgTexture.png) repeat;
margin: 0;
padding: 0;
hr {
height: 0;
line-height: 0.0;
font-size: 0;
margin: 0;
padding: 0;
clear: both;
visibility: hidden;
h1, h2, h3 {
font-size: 150%;
color: #4f865b;
margin: 20px;
font-weight: bold;
h2 {
font-size: 120%;
color: #cc6600;
h3 {
font-size: 100%;
color: #4f865b;
font-style: italic;
p {
font-size: 90%;
margin: 10px 20px;
ul {
margin: 10px 20px 10px 40px;
font-size: 90%;
a:link {
color: #cc6600;
a:visited {
color: #4f865b;
a:hover, a:active, a:focus {
color: #7dd08f;
.imgLeft {
border: 1px solid #dfdabd;
padding: 5px;
float: left;
margin-right: 10px;
.imgRight {
border: 1px solid #dfdabd;
padding: 5px;
float: right;
margin-left: 10px;
/***** CONTACT FORM STYLES *****/
#content form{
margin: 0;
width:450px;
#content fieldset{
border: 1px solid #d69400;
margin-bottom: 10px;
padding:5px 5px 20px 20px;
#content legend {
font-size: 120%;
margin: 12px 0 0 0;
color: #18006a;
#content textarea{
background-color: transparent;
border: 1px solid #18006a;
height:200px;
margin:0 30px 0 0;
#content label{
display:block;
font-size:80%;
padding-top:5px;
#content button{
background-color: #ecc97d;
display:block;
width:80px;
/* sets the enquiry box to the right of the input fields */
.labelfloat{
padding-top:20px;/* float:right;*/
#content input:text, #content select{
/*background-color: #E8E2C2;*/
background-color: transparent;
border: 1px solid #18006a;
display:block;
margin:0 0 0 0;
width:200px;
/* END FORM STYLES */
Win
Win Day, Wild Rose Websites
http://www.wildrosewebsites.com
[email protected]
Skype winifredday

Iphone quartz border around line

Similar Messages

Maybe you are looking for