Iphone recognizes my at home network but cannot connect. Message states " unable to connect to network" Any suggestions?
iphone recognizes home network but cannot connect. Message states " unable to join network". Any suggestions?
IOS troubleshooting wif - networks and connections http://support.apple.com/kb/TS1398
try - settings - general - reset - reset network settings.
Similar Messages
-
i have a new computer and downloaded the latest version of itunes.I now need to authorise my computer but cannot find the bar that contains " store windows help" any suggestions please?
Press Alt or Ctrl+B.
tt2 -
when i try to connect my new ipad to my home wifi i get a message saying unable to join the network BTHub and my only option is to dismiss
If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. Contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
See also here: http://www.apple.com/support/ipad/wifi/ -
Cannot send or receive Pics. APN needs to be changed, but does not allow updating. Phone is unlocked, using Straighttalk/AT&T. Service provider states MMS is supported with plan. Any help available?
uggyface wrote:
I have an iPhone 3GS (received as a gift)...
To make it truly yours... Restore as New.
See Section 6 here... http://support.apple.com/kb/HT4137 -
IPhone can join WRT54GS network, but cannot connect to internet
I've got a WRT54GS v.1.1 router w/latest firmware (4.41.4). My wired and wireless computers (windows XP) can connect just fine and see the internet. My iPhone 3GS can join the network, but cannot see the internet. The phone can join the network, gets a DHCP address/gateway/DNS info just fine. Other machines on the local network can see the phone and vice-versa. However, any time the iPhone tries to reach out to the internet, a message pops up saying "Safari cannot open the page because it is not connected to the internet".
Again, other machines on my network can connect without issue. My iPhone has no trouble connecting to other WiFi networks.
I've tried all different wireless encryption schemes, including no password/encryption, with the same results each time. I've also tried using a static IP address on my phone. No luck. MAC filtering is disabled, as is any other access restrictions.
Finally, I've reset the phone's network settings, reset the router to its factory defaults, and tried everything else I can think of.
I've only seen one similar message one these boards with this problem, but it was never responded to. Anyone seen this before of have other suggestions?
Thanks in advance for any help.
DavidThanks for your response!
IP: 192.168.1.100 (DHCP-assigned)
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DNS: 66.218.44.5, 66.218.44.90 (the DNS's of my ISP)
Router's (local) IP address is 192.168.1.1
Router's internet-facing address is the one assigned by my ISP via their DHCP
All looks right to me.
-David -
Connected to home network, but cannot access internet on ipad
I have got strong signal on home network but cannot access the internet. Tried resets, etc
It could be a simple problem that needs a reset for the related devices. Other than that, try to control the security settings and passwords of your home network. You might be using WEP password protocol to connect your home network. Try to use WPA protocol instead of WEP. Maybe it will help to solve your problem.
-
Recognize Network, but Cannot Connect
We recently changed the network name at my house. My ibook g4 still recognizes the network, but when I click on it to connect, it will not connect. It gives me a message box saying I can try again, but that does not seem to work. Any suggestions? Thanks.
Are you using the right encryption for the network?
Try repairing permissions and it'd be a good idea to update your OS to 10.4.11.
(You can ethernet in to do that.)
Also reboot everything, router, modem and computers and see if that works. -
Hi chaps. FaceTime question. I can FaceTime by phoning my iPhone 4 from my iPad 2 but cannot phone my iPad from the iPhone. When facetimeing from phone to iPad the phone says it's busy. The iPad rings once and then stops. Any ideas. Regards Jon
Perhaps this discussion will help with your issue,
https://discussions.apple.com/message/16502324#16502324 -
I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.
How can I access the password or, if necessary, reset it.
Read the user manual that came w/your Airport router or you can cross-post in one of the AirPort Forums for instructions. -
I use my iphone 5 to record home videos. I have an apple tv but dvd burners dont have a hdmi plug in. Any suggestions on how i can burn videos from iphone 5?
I had a av cord that plugged into the iPhone 3gs and iPad 2 but its not compatible with the 5 connector. Right now i have to email myself the videos in small segments and open and save on the iPad 2 to burn them. Is there an easier way to burn these from my iPhone 5 or through air play on apple tv?
ThanksConnect the phone by USB to the computer, import with image capture, iPhoto or whatever application you use to import movies, drop it into iTunes.
-
I switched ISP a few days ago and had problems with airplay since. After restarting and reinstalling and updating, re entering pass keys for new wi fi on everything, Apple TV shows: Your Apple TV is connected to your wi fi network but cannot connect to the Internet. Ipad3 and iPod touch 3G have no airplay icon or get one briefly then it disappears again. Same with itunes on windows laptop.
Can anyone help?
BobWelcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment. -
MacBook Pro sees wireless networks but cannot join any. Connection timeout error
I have a MacBook Pro here that sees all wireless networks but cannot join any. It gives a connection timeout error with every one.
Internet access via ethernet cable works just fine.It's not uncommon for you to "see" a great many networks, dozens even, yet you not be able to connect to any of them even if they are "open" (no lock icon). There may be a number of reasons for that, such as they're too weak for a reliable connection, or the router may limit connections to only specified devices.
There is only one way to achieve a reliable network connection, and that's for you to connect to your own wireless router. Even that doesn't work if its signal is too weak or if there are many competing wireless networks in your area.
If it's your own AirPort Base Station you're trying to use but can't, the latter could be the reason. The only way to mitigate the effects of wireless interference is to use 802.11n and 5 GHz whenever practicable. Even today you may only find one or two 5 GHz networks being used in an otherwise "crowded" area. -
I can update data from my Mac to my iPhone and iPad, and from my iPhone to my Mac and iPad, but cannot get data to update from my iPad to either my Mac or my iPhone.
If new calendar events entered on your iPad do not appear on icloud.com, go to Settings>Mail,Contacts,Calendars>Default Calendar on your iPad and be sure you have selected an iCloud calendar as your default and not something else like On My iPhone, a Gmail or Yahoo calendar, etc. If you haven't, make this change, then add a new event and see if it appears on your calendar on icloud.com now.
If your settings are correct and new events still aren't appearing on icloud.com, add any missing calendar events from your iPad to your calendar on icloud.com. Once the calendar on icloud.com is up to date with your iPad, go to Settings>iCloud, turn Calendars to Off, choose Delete from My iPad when prompted (they will still be in iCloud), then after a 15 seconds or so, turn Calendars back to On. Then add a new event on your iPad and see if it appears on your calendar on icloud.com now, and on your other devices. -
i am using iphone 4s with ios 7.4 but cannot dial the nos like *111# and *99# where as these nos can be dialed on phone with 6.1.3 how can i solve this problem
After reviewing several more suggestions, I found a YouTube video that described the issue and resolved it by cleaning the dock connector. I was skeptical, but I had noticed that immediatly after charging or using my dock that the audio would be back temporarily. After cleaning the dock port, the issue appeared to be resolved temporarily, but appears to have returned again. I will clean it well and then test again to see if it resolves the issue permanantly. So far this seems to have provided the best result.
-
I can connect to 3G, but cannot send messages or call with my iphone 4.
I can connect to 3G, but cannot send messages or call with my iphone 4.
SMS and calls are carrier features. Check with your carrier
Maybe you are looking for
-
How to Include previous Month/Year in Transformation
Hi, From Source System (DB Table;DB Connect) Location_ID,EMP_ID,AMOUNT There is no date field avaliable in the source system. The Data load to BW will me Monthly frequency...I,e:Data will be loaded once in a Months on 1st of every month. My requirmen
-
Can no longer add music files to itunes after 10.4 update
For over 7 years i have used frostwire to download and save music into a m3u file on my computer. Then i would go to itunes and add file to library locate my file i would call my music and add it. Never have i had a problem however after the 10.4 upd
-
Hi, I deleted my backup of Photos and the only place I had the photos were on my old phone and when I connected to download the photos I synced and the library on the computer is now on the phone and my old photos are gone...Can they be recovered?
-
Hi All, I have an error when open Monitoring -> Message Log. The message is in attached pictures. After I close the window with the message all fields in Message Log are empty. I have to type dates and hours from / to manualy. Does anyone know what i
-
I have a new (week 29) mbp. It came with os x 10.4.6. After software updates ran a few times, there have been no more updates. Now, cruising the mac site, i saw a download for os x 10.4.7. Is there a reason .6 doesn't update to .7 automatically? Ther