(iPhone) Remote app and internet radio

Does anyone know why the Remote app does not show the (internet) Radio tag in iTunes, when all others are present (except the Apps tag)?
This of course is to remotely cause the computer to play internet Radio over the house WiFi & Express - not to get Radio on the iPhone itself. There seems no obvious reason for this tag being missing from the control set - or is there something wrong with my setup? (but it works from iTunes on the computer).

You can create a Playlist called RADIO and drag all of the internet radio stations (or the ones you want) into that and it works fine. Works for Front Row too if you have a Mac. The only issue is that some radio stations change URL now and again, so the list can go out of date.

Similar Messages

  • Iphone remote app and itunes

    All seemed to be going well until - the updates.
    Now my iphone will not recognize my itunes libraries. I deleted the library link from the iPhone remote app and even told itunes to forget all remotes. Back to my iphone to set up as a remote - again. The iphone generates the 4 digit code, itunes even recognizes the iphone, allows me to enter the code, and returns the screen that I can now start using the iphone as a remote. --- Back to the iphone - and the remote app can "find the library" - What gives? Help
    <edited by host>

    Revelation, do you mean complete restore of the iPhone and all contents thereof? Or the Mac?
    I have deleted the application "Remote" from the iPhone, and I have re-installed it. Each time the application will work for a limited time, and then it loses the ability to locate the library.
    I continue to suspect IP addresses as the source of the problem, and wonder if the addresses must be static on both devices in order for them to maintain a connection. However, I find it odd that iTunes can register the presence of the iPhone enough to list it in the "devices" pane (therefore, I assume that the two devices are communicating over my network) but then the iPhone fails to locate the iTunes library.
    Other applications (Briefcase Lite, for example) seem to be able to conduct over-the-network business without difficulty.

  • Remote app and iTunes Radio question

    Am I missing something or are we not able to control the iTunes Radio with the Remote Application for iPod Touch/iPhone?
    I can control my music library obviously with the Remote app, but I see no where in the app to control the Radio.
    If I sit at my iMac and select/play a radio station and then look at my iPhone running Remote, I can see that it's play the radio station, but I can't select other radio stations from the Remote app. I stream music from iTunes to several speakers throughout my home and would love to be able to control the Radio from anywhere in the house much like I do my iTunes library.

    rnrjt wrote:
    Can I run the radio from my laptop?
    I'm not sure I understand your question. The only place you can run iTunes from is a computer, either laptop or desktop. iTunes Radio is part of iTunes so you run it from your computer.
    If that doesn't answer your question, let me know and I'll try again.

  • Remote App and Internet Sharing Problem

    Ok so basically heres the setup we have, we have one of the recent iMacs, a Macbook, and 3 PC's, one running XP and the other 2 Vista. All of these computers are on a network together. All our music is on one of the Vista PC's, called "SERVER". This PC is connected to the speaker system, so is what we use for music.
    Now I've been trying to use an iPod Touch we have (most recent firmware 2.2, and most recent Remote app version.) and the remote app to control the itunes on this PC. This is not an issue when the iPod is connected to the Wifi the router itself provides (its one of those wireless routers), but when I switch the Wifi the iPod is using to the Wifi provided by the iMac using internet sharing, it suddenly can't find the library anymore. Internet (safari) still works fine from the ipod when connected to this Wifi point.
    My guess is that because the iMac using internet sharing seems to act more like a router than a wireless access point (allocating its own IP adresses ect..), the iPod thinks its on a different wireless network, and thus cant see the itunes library. Obviously the iMac is connected to the router directly by ethernet, if I hadnt mentioned that.
    So, my question is, can I fix this ?
    Is there any way to make the internet sharing mac behave like a wireless access point and not like a router ?
    Help would be much appreciated.
    Thankyou.

    asuming you mean internet sharing as in you connect adhoc to 1 computer using wifi and the rest of the network is wired
    problems is the middle name of adhoc wifi though cause everybody problems imho
    and wifi routers are soo cheap most people don't bother
    even if internet sharing is used remote app should still work if not connecting adhoc at least it's working for me right now
    with a setup of many computers 1 wifi router
    1 computer sharing internet using an usb 3g modem
    remote app works with all my computers and my appletv

  • Iphone 6 apps and internet will not work

    Hello, I have had my iphone 6 for a few days now and just yesterday it died completely.  This morning I charged it up and when I went to use I had an extremely slow connection on Safari, but everyone of my other apps will not function.  Including those apps that do not even require an internet connection.  I have reset the phone a few times but to no avail.  It keeps asking me for my Apple ID and password which I have entered everytime but have no luck.  Any ideas on how to resolve this issue?  I am also current with the most previous update.

    Hi, NAJones0711. 
    Thank you for visiting Apple Support Communities.  
    Here are the best steps to go through when experiencing this issue.  
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers, 
    Jason H.  

  • Iphone 5s app and internet problem

    I was recently bought an iPhone 5s for my birthday last week. I have been trying to download apps in the store, but on nearly all occasions, when attempting to download apps a message comes up on the screen saying that downloads cannot take place at this time and to try again later. Two days later I attempted to download apps again and it said the same thing, try again later.
    Another problem I'm having is that if i use safari or any sort of wi-fi needed app such as 8tracks, maybe after 5 minutes of use it says "server cannot be found"  although the wi-fi is working fine. I then reset the phones wifi, it works for a small amount of time and then repeats "server not found" could someone guide me on what to do about this?

    Hey Hannahmlee,
    Thanks for the question. Based on the information you have provided, it sounds like both of these issues stem from your network connection. It may be applicable to troubleshoot your network connectivity. The following resource should help you out:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Thanks,
    Matt M.

  • Remote App cannot control Radio – Continuously displays loading message

    Been having this problem for quite a while and no one on the internet seems to know how to fix it. Here are the exact steps:
    1. Connect to Macbook Pro itunes from ipad 2 or iphone 4 using Remote App.
    2. Connection is established and can control local library, volume, start, stop... etc..
    3. Try to click on the "Radio" tab in the side bar... right panel displays "Loading..." messaging.
    4. iTunes on Macbook Pro appears to refresh the listing of radio stations and they are displayed within itunes
    5. iPad or iPhone remote app continues to display the "Loading..." graphic and never actually loads the radio station listing
    Result:
    Radio cannot be controlled remotely by the remote app.
    Additional notes:
    If you start a radio station from the iTunes app from the computer itself, you can then stop and start it from remote, but you can never control the listing/look for other radio stations, etc.
    Is anyone else having this problem? Seems like a huge bug and I'm curious if anyone has found a solution.
    Thanks,
    Alex

    Also having a similar problem.  Maybe what I've tried will help, possibly not though as I'm still searching for a solution too. 
    Have Remote App on iPhone 4S to control Apple TV (ver3) which it does fine regarding playlists on iTunes (on Win PC), but doesn't regarding iTunes Radio.  Curiously, Apple TV has an iTunes Radio app within it's menu, but it can only be controlled (apparently) with the Apple TV remote (not the iPhone Remote App), AND you'll need Apple TV connected to a TV monitor to see what's happening...you can't see it from the Remote App on the iPhone.  I've digressed a bit, sorry.  What I noticed on the Remote App is when you click on your iTunes library and then click on the "More" option (bottom right) it actually has a listing for Radio.  If you click on Radio the genre list comes up then you can select a station.  The problem is that the station never plays.
    In another problem post someone suggested creating an iTunes Radio playlist within your iTunes library and then dragging individual radio stations to it, just like you would any other music.  When I tried that, the Remote App can "see" this playlist through your library, but similar to the above, the station never plays once you select it.  Note: The other post suggests that this allows the Remote App to play your radio stations, but I never got it to work.
    So, like all above, I'm stuck as well.  Very strange that the Remote App can "see" the Radio stations via my two methods above, but is not able to make them "play".

  • Iphone Remote App with Linksys having problems

    Okay I have a Linksys Wirless Router, my Laptop and iphone connect to the linksys via wireless using WPA, the wireless works great, I get my iphone hooked to the wireless network .. check stocks, weather, google around.. all that works !
    I use my Remote App on my iphone and sweet that works too ... connects to my library shows my playlist on itunes .. I can play rewind, skip - everything works .. for about 3 - 4 minutes ...:( I play the songs i want click on skip a couple and boom, within 3-4 minutes my entire wireless network is down !
    my linksys goes into a frenzy ... If i leave the remote app alone .. my linksys would run just fine forever ... 3 - 4 minutes into using my iphone remote app and my wireless networks toast ... anyone here having the same issue ?
    I have a airport express that I plan to use as my default wireless router (replacing my linksys) to see if apples own wirless router has this problem as well ..
    I sure hope not ... will keep posted .. but let me know if anyone is experiencing the same problem and if there is a fix ...

    Hi,
    Since I upgraded the Remote software to version 1.3.3 (4) it seems that when I'm browsing the music Library of my Apple TV, I can click on any artist and or album. So far so good, but after selecting, the tracktitle is shown on top of the screen, but the track is not loaded and cannot be played.
    If I unplug my Apple TV then it works again, but after browsing and changing tracks 1 or 2 times, the bug occurs again.
    Martijn I've read your the post and tried to delete the songs/artists that have the word 'Edit' in it, re-synchronized the apple TV with my iTunes Library, but no luck for me.

  • ITunes and iPhone 'Remote' app, only plays one song at a time

    Using iPhone 'Remote' app to control iTunes on Mac. I click on Albums, select an album, select the first track, it plays and then stops and goes back to the albums list. I've tried every conceivable combination of the little icons for Shuffle and track repeat, nothing changes this, it always plays just the track and select and then it's done, it goes back to the tracks list. I've spent hours researching this and cannot get it to work. Thanks for any help.

    Hi, although unchecking tracks is one way to manage what gets put on your device it has other side effects that make it less effective than the use of selected playlists. I generally use unchecking for marking tracks I'd usually want to ignore, such as bonus interview tracks on an album, or podcasts that aren't compatible with my device.
    It is much easier to use playlists rather than check boxes to manage the content. There is no need to make a series of ad hoc playlists however. You'll need two, one of which you can throw away later. Create a new smart playlist with the rules *Playlist is Music* and the option *Match only checked items* ticked. Call it Checked. Now create regular playlist and call it, for example, Sync. Select all the tracks in Checked (cmd-A I think) and drag them into Sync.
    Now you can go to your main music library and cmd-click on an empty checkbox to check all of your tracks so the unchecked behaviour no longer interferes with playback. Change your sync options so that the device syncs with your new playlist. In future you can manage the content by adding and removing things from this list instead of checking and unchecking them.
    tt2

  • What is the Best app for Internet radio, iPhone 4????????

    What is the Best app for Internet radio, iPhone 4????????

    There are a number of streaming radio apps available. Best as with beauty is in the eye of the beholder.

  • Remote Panel and Internet Explorer

    Hello. I have a problem with a Remote Panel and Internet Explorer. I create a measurement system in LabVIEW. It�s composed of a main front panel and a few subVIs with independent front panels opened from main Front Panel when I press appropriate button. As a local system everything works ok but I try to create a web version of this system. I decide that I can use a Remote Panel. In Web Publishing Tool I was creating a web page for each of Front Panel. I try to have the same functionality as in local system, so when in Front Panel (opened in Internet Explorer window) I press appropriate button I want to open secondary Internet Explorer window with a subVI inside. And now I�m stuck because I can�t open this secondary window in a network w
    orkstation. Has anyone have an idea how can I do it?

    > Hello. I have a problem with a Remote Panel and Internet Explorer. I
    > create a measurement system in LabVIEW. It?s composed of a main front
    > panel and a few subVIs with independent front panels opened from main
    > Front Panel when I press appropriate button.
    I think you have two options. You can open most modal subVI panels
    directly on a remote machine. The popup panels won't be in a web page,
    but it will work with few changes.
    A second approach would be to change the app slightly. The buttons that
    launch the subVIs will turn into URL links. The links will open a web
    page with a different embedded panel.
    Greg McKaskle

  • IPhone remote app no longer working after iPhone update to version 4.2.1

    I have 4 apple TV generation 3 devices. I have had these (and some older Apple TV 2 devices) for a number of years.
    I have home sharing enabled on all the TV devices and use the iPhone remote app or the iPad remote app to control them.
    After the update to version 4.2.1 my iPhone (and my wifes) can no longer see any of the apple TV devices and I get the message
    "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account $my account"
    Home sharing is turned on on the iPhone devices (I have disabled it and re-enabled it and re-signed in to prove this as well as re-downloading the remote app direct from the app store)
    Home sharing is enabled on all the Apple TV devices
    I know this is working as the iPads can still see the Apple TV devices, but the iPhone 5s's both myself and my wife have cannot see them.
    This has worked fine for years but after the 4.2.1 update the iPhone is unable to interact at all as if home sharing is not enabled.
    I've one through the trouble shooting guides on the support pages but they don't do anything, and I didn't expect them to as I know home sharing is setup just fine as a.) it was working b.) the iPads are still working with the apple TV's
    Suggestions ?

    Update:
    Issue is still occuring, after resetting wireless router.
    Router: Netgear WNDR3400, SSID's turned off, WMM is enabled.

  • IPhone "Remote" App for Apple TV Has Become Sluggish, Slow to Respond

    (Earlier today I posted this question on the "iPhone" section of this thread but perhaps it's more appropriate here.)
    I've searched this and other forums and have yet to see the issue I'm having addressed. After successfully installing and using the iPhone "Remote" app to control my Apple TV, its performance has become erratic. While selecting and/or swiping actions were instantaneous, they're now delayed, sometimes by four or five seconds. My Apple IR remote still works perfectly. Also, the Remote app on my iPhone works fine on the TV set up in various Apple Stores I've visited. A clue that may be relevant is that my RF Dish receiver remote is a bit slow now, too, although not as bad as the WiFi-driven iPhone Remote app. It seems that something in the room is creating these problems (there are no fluorescent lights) and all worked fine months ago. Anyone have any ideas on what might be causing this?

    ok well it seems unlikely that your issue is with the appletv itself.
    could well be wifi interference.
    any cordless phones or cordless doorbells, or any new cars turned up close by with remote car alarms, or a new microwave (or old one starting to fail) ? all this sort of stuff can kill wifi.

  • Remote App and Desktop Login Does NOT work

    Hello there,
    I have an easy one for you all.  I am running Windows Server 2012 R2 Datacenter off a server at a university.  This server is only intended to be shared with ~10 people doing various tasks like using programs installed and storing data.  As
    of now, I only have been able to do RDP from home with it.  Having tried to setup remote app and desktop, it only works on the server itself and not on other computers, both on the same subnet and a completely different IP address altogether.  Let
    me break down my questions:
    1.  Though the security certificate is  installed in Trusted Root Authorities, but the site is only trusted on the server and not on any of the other computers.  How do I get the others to trust it?
    2. Number 1 except this occurs in the Remote Desktop and App window as well.
    3. Adding users would be under active directory administrative center-->[my server]-->Users-->Add  right?  I guess I cannot play with 'User Accounts' in control panel anymore.
    Any help would be appreciated.  Also, if anyone thinks I am better off doing other things like virtual desktop, then I am all ears.  I just want to keep things as simple as possible.
    Regards,
    Ben

    Hi,
    Firstly, how to you reach the server from Internet, via host name, public IP address or VPN?
    If you need to remote to the server via host name, can you nslookup the host name and get the correct public IP address of it?
    Do you install the AD DS role on the server? Please let us know if you need the active directory environment.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Remote App and iTunes not syncing

    I'm trying to get the Remote.app and the iTunes DJ to sync so that I can control my computer library from iPod Touch. However, the icon for remote does not appear in the iTunes tray under my iPod in "Devices." How can I fix this?
    For starters it is a 2.2 version iPod (volume rocker version) and I have the 3.0 firmware on it. My iTunes is the current 8.2 version. I also already have "Look for iPhone and iPod Touch Remotes" checked in my preferences in iTunes. I do have a wireless connection and both my laptop and iPod are connected to it properly. My iPod was connected before, but accidentally. I removed another computer from the library list and now it won't connect.

    Have had the exact same problem since the last iTunes update came through. remote worked just fine before that.

Maybe you are looking for