Iphone Remote - Need to be connected wireless?

Hi,
I've just downoladed the Remote app to my iPhone.
I've got one computer and on AppleTV connected to my home-network.
For some reason, I'm not able to connect to my computer (which is running latest ver of iTunes).
I'm able to connect to the AppelTV if this unit is on the wireless network, not if I connect the AppleTV to the network via cable.
So, my question is:
Do all units I want to control with the Remote App need to be connectet wirelessly?
rgds
K.

You MAY have a registration/activation problem... when you are connected...
Chat Now button near the bottom for Activation and Deactivation may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Similar Messages

  • Can iPhone remote start app be connected to general motors factory remote start

    can iPhone remote start app be connected to general motors factory remote start

    You can with onstar.
    http://www.ehow.com/how_7686640_activate-remote-starter-cell-phone.html

  • WRT320N : Keep needing to re-connected wireless lan

    Hi
    I have a problem with a WRT320N that is wirelessly connected to a windows 7 PC using a WUSB600N network card.
    As soon as I boot the PC, everything works fine. Then after about 30 secs I lose connection to the router. If I disconnect and re-connect the wireless network in windows and everything is then fine until next time I reboot the PC (or it wakes from sleep) and then the same thing happens.
    Can anyone think whats causing this?I am assuming its related to the DHCP reservation but cannot work out why this is occuring.
    The router has the latest firmware (1.0.04). The router is set to Wireless-N only, and the PC has a DHCP reservation.
    The information that appears in the logs everytime is as follows:
    >>
    Tue, 04 Jan 2011 21:02:17 Found static leases pair : MAC 00:25:9C:E0:61:41 , IP 192.168.1.2
    Tue, 04 Jan 2011 21:02:17 received REQUEST from 00:25:9C:E0:61:41
    Tue, 04 Jan 2011 21:02:17 sending ACK to 192.168.1.2
    Tue, 04 Jan 2011 21:02:21 Found static leases pair : MAC 00:25:9C:E0:61:41 , IP 192.168.1.2
    >>
    Grateful for any help
    Thanks
    Chris

    Well I am using Wireless N so its only 36,40,44 or 48 for the channel options.
    I changed the Beacon interval, RTS and fragmentation thresholds as you suggest but it made no difference.
    The same thing also happens whether the PC is connected with a cable, so I don't think the wireless settings are of any consequence.
    I really need to get to the bottom of what the log message REALLY means.
    What does 'found static leases pair' really mean?
    It thinks it has given the same IP out to 2 cards?
    Is it not recognising the MAC properly?
    Its issing the IP twice?

  • IPhone Remote Won't Stay Connected to Apple TV

    I have an apple tv, iphone 3gs and ipod touch first gen.
    I am having many issues using either the ipod or iphone as the remote.
    When I have connected to the the apple tv itunes library with the iphone's remote app it works fine. But as soon as either the apple tv or iphone fall asleep, turn off or disconnect they lose each other. I then cannot re-connect to the apple tv's itunes library. I am still able to connect to another itunes library but not the apple tv.
    The only way I can manage to connect to the apple tv library with the iphone again is by resetting both devices and unpairing them. Then I am able to put the four digit code in again, works fine untill it goes to sleep. A big circle!
    I have installed the app on my first gen ipod touch, however the app just won't open. I have purchased the 3.0 software for the touch, but the app doesn't work on it.
    I am very much at a loss.
    I would appreciate any help or tips. I have tried opening the two ports apple suggests opening. However that does not help.
    Thanks,
    Syd

    I too have the same issue. I could connect to either iTunes or Apple TV, but as soon as I got out of one or the other I could never get it to connect to the library. I spent hours messing with my router, and nothing worked.
    I did notice that my iPod Touch (which is running 3.0 firmware) had no problems at all connecting to either libraries. So I knew it wasn't a firewall issue.
    The only think I found to work (and was the easiest workaround) was to go on the iPhone Settings > Wi-Fi and turn off Wi-Fi for about 10 seconds. After turning it back on and the phone reconnected to the Wi-Fi network, I could immediately connect to Apple TV or iTunes. But as soon as I got out, the problem happened again.
    I definitelly think there is some TCP/IP bug in the software that isn't meshing with the iPhone 3.1.2 firmware.
    I hope this helps.

  • IPhone remote app won't connect to my iTunes library

    -Already seen this question, but for older versions and slightly different problems, so I'm asking it again, sorry
    -running IOS 10.0.2 on iPhone 5, Mac OSX 10.6.8
    -iTunes recognises my device but the option to type the 4 digit code doesn't come up, what do???
    -home sharing doesn't work either :/

    I've had a similar problem for weeks. 4s running 5.1.1 with latest iTunes on Windows 7. Remote asks to Turn on Home Sharing, which is already on. None of the lame troubleshooting suggestions made a difference.

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • New iphone 5s will not connect wireless to itunes

    I recently upgraded from 4s to 5s on 2 units.  The 4s would sync wireless to airport but both new 5s will not.  Neither my phone or my wife's phones will connect wireless but will when connected.  I have checked 'Sync with this iPhone over Wi-Fi'  under Summary when connected by cable and other system settings on the phones seem to be in order.  I have searched Apple site and believe all necessary steps have been taken.

    I thought I should say something since I had the same problem with iTunes 11.1.3 connecting my iOS devices. iPhone 4, 5, iPad 4th gen, all on latest iOS7. My setup is on macpro 3.1. I tried updating OS, from  OSX Lion, ML and Mavericks. Obviously, updating OS did not solve the issue. iTunes was the latest and greatest at 11.1.3 on all of them. I also had the annoying TRUST message pop up constantly, while it could connect to iPhoto, but no iTunes, for backup and syncing.
    Long story short, found out on various forums people were having success syncing their iOS devices again on previous versions of iTunes. In my case, 11.1. Going back to 10.7, it will not support iOS 7. For this, you need to delete iTunes 11.1.3.
    I found this helpful, but beware it involves Terminal.
    http://osxdaily.com/2012/02/06/delete-itunes-mac-os-x/
    Then, through good ol' google, I could fine a previous version of iTunes 11.1.
    Installed it, connected my iPhone 5, and voilà, iPhone detected as before, and ready to backup and sync.
    Spent many days researching this, it may not resolve the issue for everyone, but I hope it can help some folks running into a similar issue.

  • I just purchased an Apple TV.  I have a pc running windows 7.  It is connected to a router and the router is connected to a wireless router.  I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

    I just purchased an Apple TV.  I have a pc running windows 7.  It is connected to a router and the router is connected to a wireless router.  I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

    I don't mean to be facetious but sometimes the simplest things are overlooked.  To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open.  It also needs to be on the same network.  My network is dual band and works with either stream but a friend of mine does not.  He has to set the computer and the Apple TV to the same band.  Hope this helps.

  • TS4006 How do I remotely unlock an iPad using this app from my iPhone once the user has connected to WiFi?

    How do I remotely unlock an iPad using the Find My Phone app from my iPhone once the iPad is connect to WiFi?

    I'm not sure about the apps, but to prevent theft, you'll also need to disable the power button and the ability to restore the ipad. You might also want to superglue in your Sim card because if they remove that, it wont be tracked unless they connect to WiFi.
    Also, I'm not so sure it is an app on the iPad. I think it is built into the mail, calendar and contacts options if you have a Mobile me account.  http://www.apple.com/ipad/find-my-ipad-setup/

  • Remote app on iphone with Itunes library / Erratic connection problems.

    I have been using Remote app on my Iphone to manage Itunes for months with 100% pleasure and 0 trouble.
    For a few days, it has some erratic behaviour like having difficulties to connect to my Itunes library.
    In such case if I touch the Change Library button on Iphone remote screen, it connects quite instantly...
    I have a simple wifi network generated by my adsl box and a single computer.
    The remote setting option "stay connected" on Iphone is On.
    Generally when I get connected if I quit remote on Iphone and restart it within a minut it will find the library in a jiffy most of times ... but sometimes not.
    I disabled firewall : no change.
    I scratched all remotes in Itunes and paired the Iphone again : no change.
    Does anyone with some idea ?
    Thanks in advance.
    Jean.

    Almost the same issue here. And this only started yesterday.
    Initially iTunes would not pair at all, but I went into add/remove programs (Win 7 PC) and ran a repair on Bonjour, Apple Mobile Devices, and iTunes. I did not remove or reinstall any of these applications.
    After this my iPhone remote app would be found by iTunes, the passcode accepted, plus the library showed up. I thought I'd cracked it...
    But after a few minutes - usually when the screensaver kicks in on my PC - my iPhone loses connection to my library and WILL NOT reconnect unless I restart iTunes.
    I have to say that over the years the remote App is without doubt THE most buggy, inconsistent and erratic piece of software I have ever used. If there was a decent alternative I'd have ditched it a long time ago.
    Looking forward to a solution from one of the experts here (not expecting Apple themselves to even respond!).

  • Since I downloaded the latest version of iTunes, my remote app on iPhone and iPad does not connect to iTunes library... Any ideas?

    Since I downloaded the latest version of iTunes, my remote app on iPad and iPhone does not recognise ,or connect to, my iTunes library... Any ideas ?

    Hi Pittgo76,
    If you appear to missing your iTunes library after a recent update, you may find the following article helpful:
    Apple Support: No content shows up in iTunes after updating
    http://support.apple.com/kb/ts1967
    Regards,
    - Brenden

  • Iphone remote won't connect to my iTunes library and tells me the passcode is incorrect

    My iphone 5 previously worked with the Remote app to control streaming of music from my itunes library to my amp with Airplay capability.  Now it can't find my itunes library and when I go to the Settings for Remote app and try to add the library, it won't accept my passcode on itunes screen where it appears.  I deleted the app and re-added it to my iphone but it still won't work.  My Remote app still works on my Ipad so I'm a bit perplexed as to why it won't work on my iphone 5. Any suggestions?

    Hello dawgfaj,
    Thank you for all the information you provided with the Remote app issue you are experiencing on your iPhone.  I found an article with steps you can take when the Remote app is not connecting to iTunes:
    Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
    http://support.apple.com/kb/ts1741
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • It says it needs to be connected to itunes and restored.  when i do that, it goes through the whole process then comes up with "iphone could not be restored. unknown error code (-1)".  Please help

    My brother gave me his old iphone when the touch screen went out on mine.  It's in great shape but when I received it, it says that it needs to be connected to itunes to be restored.  I have done this and it goes through the whole process then says iphone "iphone" could not be restored.  unknown error code (-1).  There is not a -1 code on the list and I have tried most of the suggestions.
    Does my sim card need to be in when I am doing this?  And any other suggestions?

    I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.

  • TS1741 i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

    i lost my appletv remote & can no longer connect to it with my iphone app. is there any way that i can reconnect with my iphone app without having to buy a new remote?

    Doubtful - why did the Remote app lose connection?

  • My iPhone 5 will no longer connect via bluetooth to Fitbit Flex or wireless headset

    My iPhone 5 will no longer connect via bluetooth to my Fitbit Flex aftering updating to ios 7.  Apple phone support had me completely erase and set my phone up again as new to restart bluetooth pairing, then restore again through iCloud.  Worked last night but same problem today.  It also will no longer connect to my wireless headset in my car.  Of course I'm now 5 days over my 1 year warranty as well.  Any ideas?

    Delete the pairing from both devices then pair them again.

Maybe you are looking for

  • How to create an interactive alv report in which some parameters

    hi all, i want to create an interactive alv report in which some parameters in selection screen & when fill those & press f8 then an alv list display will show & when user double click on any row then those contents get shown in header details of mod

  • At what point oracle write "Checkpoint not complete" in alert log ?

    DB version: 10.2.0.4/RHEL 5.8 During a batch run, we encountered lots of 'Checkpoint not complete' errors in alert log. Later we discovered that ORLs were sized only 50mb and this DB had only 3 redo log group. Since this is the potential cause, we ar

  • Why attribute ID doesn't support EL?

    I have problem to get component source from ValueChangeEvent because I cannot set ID to each component inside table rows (i.e: SelectBooleanCheckbox). checkbox attribute ID aren't unique in table row because ID is not support EL or variable. So HOW D

  • Interface SAP - External System

    hi expert i need make a interface beetween sap and a visual basic program... my idea is use a rfc, but i think i need use a connector, can i do this without a extra connector ...my client don´t want buy a licence thxz......

  • To print two ' continuously

    Hi, I want to pass (' ' abcdef';3;5' )as an argument some function but when i am passing like this i am getting error quoted string not properly terminated. Can any one help me out. Regards, Guru.