IPhone Restore Failing at "Verifying IPhone Restore" Error -6

i have an old iPhone 3G that i use for my daughter. i took out the sim card and she could watch movies and play games. it crashed one day so i plugged it into a mac and tried to restore. well it goes through it's processes and gets to "Verifying iPhone Restore" (it completes "Verifying iPhone Software") and stops with an Error 6. I looked at Apple's page here http://support.apple.com/kb/ts1275 and Error 6 has to do with Windows Registry. Well i wasn't using a windows box to restore, i tried it on a 15" MBP, a 13" MBP, and a 27" imac. I have tried doing this over 30 times and get the same Error 6.
Does anyone know of a solution to this? The iPhone is about 2 months out of warranty so i cant send it in without it costing $$$.

i took out the sim card and she could watch movies and play games
While you can use an iphone as a touch without a sim card in the phone, you cannot update or restore software without a valid sim card in the phone. The sim card need not be activated(with a carrier plan), but it must be present. So, are you trying to restore without a valid sim card? If so, that's your problem. You need a valid sim card, which is defined as a sim card from the carrier the phone was last locked to or used with. It need not be activated(with carrier plan), but it must be present.

Similar Messages

  • Iphone fails at verifying iphone restore

    I am using windows 7, I have updated my iTune to 10.5 and backed up my iPhone 4 and started updating phone but it failed when verifying iphone restore and it gave error 6 tried every step but still not successfull can some help please as I cannot use my phone.

    I'm having the same problem. I'm using the same usb outlet that I use all the time. I've used it with all other updates, accessories, etc. I did change the cord to make sure that it wasn't that, but I don't have any other outlets to try. I read on another post to try the outlets on the back of the machine, but my laptop only has the 2 on the side.
    I posted a similar question myself... Hopefully someone will have a suggestion

  • I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

    I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

    Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

  • HT201263 After forcing iPad into recovery mode and choosing Restore, restore fails and returns a 1600 error. What is my next step? Can you force a restore?

    iPad has blank screen.  Screen froze and went blank.  Have not been able to get any response.  Forced in to recovery mode, but restore fails with a 1600 unknown error.  Has anyone had any success in reviving an ipad in this state?

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for  details on troubleshooting security software.
    Message was edited by: Texas Mac Man

  • My iphone has been in verifying iphone restore for over 3 hrs please help

    my iphone 4s was getting the 3194 error message and then the 2005 error message i used tinyumbrella to get it to finally go into restore mode but its been 3 hrs for 3 hrs its been stuck on verifying iphone restore for 3 hrs? what should i do, leave it overnight or disconnect it and try to start over please only reply if this has happened to you and you have successfully restored your iphone thank you

    thank you for that ...my phone was already in DFU mode and thats why i was trying to restore it, it wouldnt restore it just kept saying verifying iphone restore and finally after 3 hrs of researching posting posts and reading posts i called apple and bought extended warranty for apple care for 70.00 and he helped me fix my phone over the phone safely and i didnt have to worry about wrecking my phone or making it worse, it was the best 70 i ever spent because i have been trying since last night to fix it i spent hours all day today and no one could help me

  • Iphone restore stuck on ''Verifying Iphone Restore "

    Iphone is in recovery mode and the screen is unresponsive unless i plug it in and start the update and restore on itunes then the apple symbol shows up . But half way through the restore is gets stuck on "Verifying Iphone restore" . I have tried it on 3 different Windows xp computers no luck still gets stuck at the same point . I also have left it over night on the step and still no luck .. I dont know what else to do . . any ideas please help Thanks
    Message was edited by: helpmee012

    Thanks for the link to that troubleshooting article elsewhere on the Apple site. That worked for me, but not until the very last step (before calling Apple). I did a complete uninstall of iTunes and tried to uninstall the AppleMobileDevice extension as well. Only then did the restore work.

  • Mac OS X Lion unable to install after internet restore fails to verify

    I am in middle of the restore process.
    I have deleted the partition as adviced by apple support. But when on step to install Mac OS X Lion (using internet restore), it asks for apple ID for verification.
    On providing the correct credentials too it fails stating that "This apple ID has not purchased Lion"
    I am hereby attaching images from my appstore showing the receipt of the product being bought. See the thrid entry from last (OS X Mountain Lion) .
    Kindly advice as why is it failing to verify ?

    After mutiple retries and diffculties I have reinstalled Snow Lepord on the Mac.
    But after sucessful reinstallation the problem still exists. Once the installation was over it asked to reboot.
    But the behaviour remains the same.
    I dont see anymore the crsip light grey screen at startup, its always the interlaced blurry greenish grey screen.
    Then it gets stuck on the plain light grey screen , later which turns to blue screen.
    So to complete the intial setup ; I had to reboot in safe mode. completed the initial setup and configuration ; including creation of user AC ,etc.
    I have tried safe boot;but with no fix . In one instance when I tried to reboot in safe mode it stopped after trying to start in GUI mode with curson linking on a  black screen ; as if waiting for me to type some command.
    I tried all commands such as exit , reboot , with no luc.
    Hard booted .. tried in single user mode ...
    again display was never clear and on a flourosent green interlaced screen.. entered the single user mode.
    tried /sbin/fsck -fy ; twice till I got message “The volume XZY appears to be OK”
    Still the problem existed.
    Then as a last hope tried PRAM reset combination and looks like I got the clear crisp grey screen .. hence took the fingers from combination.
    Though the mac started as of now .. I feel the problem is there .. and waiting to strike back again. Kindly let me know if my analysis are not correct. What should I do as next step ?

  • Upgrade of iPhone 5 failed 95% in with "AMRestoreErrorDomain error 6 - failed to fixup var"

    Hi,
    I am trying to upgrade my iPhone 5 to iOS 8 using itunes.
    I got about 95% through and then a pop up on my MBpro said something about "Failed with error: 6"
    The error log quotes "AMRestoreErrorDomain error 6 - failed to fixup var"
    Any ideas? Its been stuck on 95% for over 30 minutes now.
    Thanks

    Ok, so I unplugged the phone. Presses and held the home button until it started up.
    The screen requested I plugged it into the laptop again, which I did and it requested a restore... it has now started the upgrade again... fingers crossed.

  • HT4061 restore failed because of an unknown error -1

    I started getting an "Activation needed" message today after my phone rebooted itself.
    I tried to do a restore in itunes but it fails every time.
    Any ideas?

    For Error -1 you need to call AppleCare at 1-800-275-2273.

  • Ipod touch restore freezing at "verifying ipod restore"

    it wont go past that. and yes, ive tried 3 different computers, put it in dfu, put it in recovery, and uninstalled itunes multiple times. how do i get it to stop freezing?

    ive done a hard reset, but theres nothing installed on the ipod to reset. and ive done everything on that site. ive even gone through and removed everything that has to do with apple, ipod, or itunes on my system registry, and it continues to freeze during restore. and im on Win XP trying to restore to 2.21 firmware on my ipod. and no, my ipod has never been jailbroken. is there any solutions to this issue that dont involve removing itunes, or drivers? because ive done everything that has to do with that. it freezes regardless

  • Restore fails

    My phone failed when I tried to upgrade. Now when trying to do a restore Itune downloads an upgrade but after the install window opens it says the "restore failed because of an unknown error -20"
    I've tried the restore download about 10 times so far.
    My phone wont work and is stuck in DFU mode, any ideas?

    I'm in the same boat.
    I've removed Itunes relaoad, rebooted several times.
    Every time I go to restore it downloads the software 30 plus minutes then goes back to the loop restor,download,restore, download.....
    I'm at a loss

  • Restoring i phone 3gs getting unknown error 28

    Restoring i phone 3gs getting unknown error 28, restore failed....

    what error code is it?
    Check out http://support.apple.com/kb/ts3694 for causes and solutions !

  • I have recently bought an iPhone 4S and I am trying to install iOS7. The install initially failed and I received an error message. I attempted a restore, however, the progress bar is now stuck at "Restoring iPhone software.."

    I have recently bought an iPhone 4S and I am trying to install iOS7. The install initially failed and I received an error message. I attempted a restore, however, the progress bar is now stuck at "Restoring iPhone software.."
    I'm still attempting to restore it, but the process goes as follows
    - Extracting software.
    - Waiting for iphone.
    - Preparing iphone software for restore.
    - Verifying iphone software.
    - Restoring iPhone software.
    It is at this point where it begins to load approxiamtely 10% and then freezes. I have had the handset connected 7 hours with no progress and this is my third attempt since Friday. Please help.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743

  • IPhone 5 firmware restore failed (unknown error 1)

    hi everyone,
    I updated my iPhone 5 from ISO 6.1.2 to 7.1.1 via iTunes by restoring and it was working fine but when 7.1.2 update came n I was trying to install via wifi, it failed a lot of times. so I connect my iphone to iTunes n tried by restore iphone, during this my phone was restated and it never showed up on iTunes so I disconnect iphone, since that time iphone is in recovey mode, now whenever I connects iphone to iTunes, a msg pop up on iTunes "iTunes detected an iphone in recovery mode. You must restore this iPhone before it can be used with iTunes." so I click on and then I click on restore and update. it goes for Extracting Software> Restoring iPhone software>verifying iPhone software>restoring iPhone firmware  but never completes, a msg comes on iTunes iPhone restore failed. unknown error(1) I does the same like I m putting a link from someone for iphone 5s.
    https://www.youtube.com/watch?v=vQq9P0xiSGk
    if someone has a solution please share with me asap.
    Thanks

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • My iPhone 4 fail to update to iOS 5 and now it can't restor the firmware I am geting and error it says The iPhone "iphone" could not be restored. An unknown error occurre (-1) . Plese help

    My iPhone 4 fail to update to iOS 5 and now it can't restor the firmware I am geting and error it says The iPhone "iphone" could not be restored. An unknown error occurre (-1) . Plese help

    My iPhone 3GS is getting the same error. I've called Apple a bunch of times, and they won't get back to me. I'm searching through discussions to figure out a solution.

Maybe you are looking for

  • Open DeviceNet interface error when TestStand call VIs of NI PCI-8532

    Hello, We use NI PCI-8532 was used as DeviceNet master to do functionality test with a slave (AC Drive). But when open DeviceNet interface, it happen the error. We can't find the solution and hope to find help from you. The basic sequence in TestStan

  • Add component to existing GUI

    hi, I have created simple GUI with one panel containing button and textfield: public class GUIClass{ private JTextField textField1; private JButton button1; private JPanel mainPanel; private final JFrame frame; public GUIClass() { frame = new JFrame(

  • Create OracleParameters at runtime in C#

    I have an array that contains datatype.. string[] dt_types = {"Varchar2","Date","Decimal","Double"}; in a loop i want to create four oracleparameters that are of type Varchar2, Date, Decimal, Double NOTE: The contents of array may change from time to

  • Controller Assignment Question

    Hello, i was wondering if anyone could steer my in the right direction on this problem I have with controller assignments. See, i want to use Logic 7.1 on my Powerbook in a live situation with some midi controller knobs. The question is, how can i se

  • RAW Images SUPPORT

    I trying to locate a list of what cameras are supported by iPhoto5's RAW import capability. I have a CANON Digital Rebel XT.