IPhone ringer volume always displayed?

My iPhone 4S has been constantly displaying the ringer volume since this morning. I have tried turning off my phone and turning it back on, resetting my phone, syncing it to iTunes, and pretty much everything else. Everything is functioning correctly, and I'm able to navigate my phone normally, but it's an inconvenience to have to try to look at the things on my screen through the ringer volume notification. Help?

Clean the headphone jack port at top of iPhone. Carefully blow it out, insert headphones few times, clean it carefully.

Similar Messages

Iphone ringer volume problem fix

This is basically because of water vapours which get into the port for earphones at the top left of your mobile.
The problem is that your device might be thinking that the junk stuck inside the jack is actually a stereo plug connected, so it turns your built-in speakers off thinking you're jamming with your headphones on, though you're obviously not.
There used to be a fix for this problem via jailbreak by just deleting some file and making one terminal in the port disabled so that you could use ringer with and without earphones.
But now that most of you would have upgraded your software by now so i have got one simple fix for you guys.. and that is....... just try to remove trapped water vapours and possibly some rust that may have deposited there in the audio out (earphone port/ headphone jack) at the top left of your iphone.
In order to do that, just try a cotton bud which we normally use to remove earwax and clean the inner sides of audio port/ headphone jack or whatever you call it.
Its as simple as that.

Hi shyema,
I know I would be disturbed if my iPhone ringer was not performing as expected. Let's see if we can get you back on track. For issues with speaker volume, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L

IPhone ringer/volume isn't working

Hello everyone,
I updated last night after not updating for a very long time. I bought a MacBook a few days ago and everything seemed fine until I realized my ringer wasn't working on my phone. Text alerts were silent and none of my media would play volume either. The volume is all the way up in settings and the mute button isn't on. I have vibrate enabled and so when I get a call or text the phone vibrates but with no sound. I also tried playing a song in itunes and it won't even play. I used air to clean out the headphone port and now I can hear audio of youtube videos but when I play a song in itunes I hit play and nothing happens. Not even the song timer. I'm so frustrated!! I had restored w/ back up, reset settings, I feel like I've tried lots of things and nothing is working. Any help would be greatly appreciated!!!
Thanks

Hi there canucklehed,
You may find the troubleshooting steps in the article below helpful.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
-Griff W.

IPhone SMS message always displayed

I have recently noticed that my iPhone is displaying the new SMS message alert on the Home Screen even though there is no new message when I open my inbox.
I have checked for updates and deleted conversations but that doesn't seem to be working.
Any ideas...?
Thanks in advance...!

You could try turning this off and on to see if it clears: Settings>Notifications>Messages>Badge App Icon off, then on.

Why does the ringer volume display frequently on 3gs

Why does the ringer volume keep displaying on my 3gs? Seems it may do this when the phone is picked up or shaken.

This just happened to me today. The ringer volume display just remains on screen. Tried hard rese, nothing. It happened right after I dropped my 3GS - of which I've done many times but had not affected it because of the silicone case taking the brunt of the shock. Hope someone has a solution to this.

6230i ringing volume, display blinking

I have a 6230i what was updated from 3.30 to 3.40, but I still have the problems.
First, my phone changes the ringing volume spontaneously. It's very disappointing because sometimes I can't hear when somebody call me.
I always use the Outdoor profile where ringing volume is set to level 4.
Second, the display spontaneously starts to light.
Is there a newer software release which can solve this problem or do you have any idea?

It sounds like the ridiculous feature that Nokia have introduced that makes the phone volume ascend instead of just being loud! Even though there is an option for it, it does it anyway. I have written to complain about the 'feature'Message Edited by karim on 21-Feb-2006
03:35 PM

I have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume

i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it

How do you turn ringer volume up on iPhone

How do you turn ringer volume up on iPhone 5? Ive tried going to sounds but it didn't work.

I also have this problem that when i power my iphone off all the volumes go down i wen to where i bought it they said to reset it well i did and it didnt work we went back up there and told them it didnt work! SO now every time i turn it off all my volumes go down and i tried to turn them up but i downloaded no type i cant listen to it now i love iphones and my cousin had this same problem if thats the case f*ck i phones im getting a **** galaxy

After update my iphone 4, I have problem charging my phone. It will always display Charging is not supported with this accessory

After update my iphone 4, I have problem charging my phone. It will always display charging is not supported with this accessory. What happen to iOS 5, how come it can register my charger?

I have a 3Gs and I cant charge my iPone with any of my non Apple charges such as my Logitech stereo since I upgraded to IOS5... what did Apple do?
/M

My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong.

HT201401 Problem with my iPhone 4S volume, my phone will vibrate but won't ring...

I Have a problem with my iPhone 4S volume, my phone will vibrate but won't ring. IS IT EASILY REPAIRABLE?

if it play when you connect a headset
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=utf-8&oe=utf-8&channel=suggest

Ringer volume on screen always

My ringer volume display won't disappear from the screen

Hi @mentonebob,
Welcome to the HP Forums!
I see that you would like to turn the ringer on your HP Photosmart Premium Fax - C309a printer off. I am happy to help you with this issue!
To turn the ringer off, on the printer's control panel, touch the wrench button for Setup, then look for Basic Fax Setup, then look until you see Fax Sound Volume, then select Off.
Hope this is what you are looking for and have a wonderful day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

IPhone 4S - after 6.1.1 update, cannot adjust ringer volume, and odd music playback behaviour

This is a minor issue that'll probably end up in the hands of some apple tech, but I'm curious to see if anyone else is experiencing this.
After updating my phone to 6.1.1, I noticed that occasionally I did not hear anything when playing music through earphones. An attmept to adjust the volume simply displayed the "ringer" icon and no volume meter. When I launch a new song from stopped (not paused), there was no sound or any ability to control it. I unplugged the earphones; the play icon remained, it normally disappears indicating a pause. Plugged back in and music started coming through.
Text/Ring tones are still audible; good because I use it as an alarm clock. The phone is behaving as though it were "docked" though the music playback thing is just weird. I haven't tried playing music while it is actually docked yet.
Will try a restore tonight after work.

Ok, so I found this thread in another part of the forum and thought "hey maybe I should try that". I borrowed a can of compressed air from the IT guys and fired it into my phone's dock port. A few particles of who-knows-what came flying out. I've been testing it pretty thoroughly for the past hour, so far it seems to be back to normal. How a dirt particle can short the docking circuitry into thinking it's docked, I have no idea, I'm not an electronics expert...
Anyone having the same issue, go grab a can of compressed air, blow it into your phones ports (both dock and headphone jack), or try the toothbrush thing in the above link. If you use a dock regularly, keep it clean!

Cannot Change Ringer Volume, Iphone 4

I am having some issues with the ringer volume on my iphone 4.
Cannot change the ringer volume with the side buttons, when I press them the ringer volume icon apperas but with no bars underneath it and unable to change it.
I have Ringer & Alert set to Change with Buttons.
However I have seen that when I press the home button twice and swipe to the mirroring icon this phone does not have itself in the list, but has my Apple TV's and the Dock Connector. IN my other iPhone it has the iphone.
I cannot chnage it from the Dock Connector setting.
Any idea on a fix. Did a full restore and this did not help.

Here is how I got mine to work again:
I plugged in the earbuds and made sure I can hear the sound from the earbuds then I just simply unplugged the earbuds and it worked! Hope this help you!

Why does the iphone 5 always display the wrong time

why does the iphone 5 always display the wrong time

I had similar problem. My iPhone was always about 3 minutes faster than the correct time here in the UK which I found to be very irritating. It just came to a head because here in the UK we have just changed from British Summer Time back to standard GMT. This actually worked automatically except that the iPhone time still showed it to be about 3 minutes faster than GMT. However I have now cured the problem (almost) by going to
Settings/General/ Date & Time/ and then selected the "Set Automatically" button.
The clock then immediately jumped back 3 minutes and now the iPhone time is only about 10 seconds slow which is good enough for me.

IPhone ringer volume always displayed?

Similar Messages

Maybe you are looking for