IPhone's clock showing wrong time zone

I just flew from Davenport, IA to Detroit -- from Central to Eastern time. When I got off the plane and turned the phone back on, its clock still showed (and still shows now) the current time in Central time. I am connected to AT&T, and have made a call. Why isn't the phone aware that it has changed time zones??
Thanks,
DM

Thanks Jim. It was indeed set to "OFF," but I could've sworn I had it set to "ON" on my previous iPhone (3G). When I bought the new 3GS, I restored the settings from the old one. Maybe that setting didn't survive the journey...

Similar Messages

  • Invite from Lotus Traveler shows wrong time zone

    Question: why is the time zone always showing as Hawaii on calendar entries sent using Lotus Traveler and which I accept on my iPad?
    Here are the facts:
    1.  I am an iCloud user (on my personal iPad and Mac)
    2.  I access work emails/calendar on my work iPad using Lotus Traveler
    3.  I send an invite from my work calendar on my work iPad and accept the invite into an iCloud caldendar on my personal iPad.
    Result:  Invite shows correctly on my calendar on my personal iPad but when I open Calendar on my Mac, the invite will ALWAYS shows as "Hawaii" timezone.
    I've tried all combinations of timezone support on/off etc. The problem also does not present itself if I accept the invite from Calendar on my Mac.
    I've taken alook at the .ics file that is origanlly sent and the TZID is "GMT +10" format as opposed to "Australia/Sydney". If I look at the .ics file on my Mac, it as "Hawaii" as the TZID.
    Do anyone have any ideas?
    There are a few posts of similar issues from a few years ago, but the issue seems to have been resolved in previous OS versions.

    I don't have an anwer to the previous in this thread but I believe a related question. I recently received two invites to meetings from a Lotus Notes v6 user. Each repeated weekly on a Tuesday for 10 weeks and one meeting followed the other. The first posted to iCal perfectly. The second posted a meeting on the Tuesday in the first week at the correct time. The first repeat however posted 24 hours later (not a week later) and then repeat weekly but on the Wednesday (not Tuesday) but at the correct time.
    I have examined the ics script of both meetings. The only difference appears to be that the meeting that posted correctly had DTSTART and DTEND both on the same date (in Universal Time) where as the one that incorrectly posted the repeats the meetings spanned midnight in Universal Time. Are there any patches or ways to fix this. Can I edit the script and then re-post it to iCal so as to "trick" iCal into placing this on the correct day?
    I have copied the header script for the meeting that behave correctly below:
    BEGIN:VCALENDAR
    X-LOTUS-CHARSET:UTF-8
    VERSION:2.0
    PRODID:-//Lotus Development Corporation//NONSGML Notes 6.0//EN
    METHOD:REQUEST
    BEGIN:VEVENT
    DTSTART:20070910T230000Z
    DTEND:20070911T010000Z
    TRANSP:OPAQUE
    RRULE:FREQ=WEEKLY;UNTIL=20080129T010000Z;BYDAY=TU
    DTSTAMP:20070905T004709Z
    SEQUENCE:0
    ATTENDEE;ROLE=CHAIR;PARTSTAT=ACCEPTED
    The header for the script that does not operate correctly for the repeats is copied below:
    BEGIN:VCALENDAR
    X-LOTUS-CHARSET:UTF-8
    VERSION:2.0
    PRODID:-//Lotus Development Corporation//NONSGML Notes 6.0//EN
    METHOD:REQUEST
    BEGIN:VEVENT
    DTSTART:20070910T230000Z
    DTEND:20070911T010000Z
    TRANSP:OPAQUE
    RRULE:FREQ=WEEKLY;UNTIL=20080129T240000Z;BYDAY=TU
    DTSTAMP:20070905T004709Z
    SEQUENCE:0
    ATTENDEE;ROLE=CHAIR;PARTSTAT=ACCEPTED

  • Have a Sprint iPhone 5, shows wrong time zone when LTE is on

    I live in Knoxville TN and this just started happening. I've tried resetting and restoring, but it wil go back to being wrong after 10 min or less. Is there anyone else that has ahd this problem and fixed it. Running iOS 7.0.3

    I too live in Knoxville and my phone has started doing that as well. It goes back one hour whenever LTE is on.

  • Widget world clock shows incorrect time

    widget world clock shows incorrect time.. how can i fix this?

    There are two possibilities: (1) your computer's time is wrong. Open System Preferences, select the Date & Time tab, and either set the time manually or select a time server. If you choose the time server click on the Time Zone tab and choose your correct time zone. (2) click on the i on the World Clock widget and select a city near you (that's in the same time zone as yours.)

  • RE: iPhone 5 is showing wrong carrier name

    My iPhone 5 is showing wrong carrier name (near signal bars and also in the settings) even after turning off multiple times and even after changing carrier settings from automatic to manual and Vice Versa. My device is on iOS 7.0.4. I've tried replacing the simcard but still it is showing wrong carrier name. My service provider told me that I'm using the correct signals. I've purchased this device whilst I was in the UK with Vodafone as the carrier but the device has been unlocked to network. I've now moved to India and I'm using AIRTEL but the carrier name is displayed as VODAFONE IN.

    I've moved from Hyderabad to Bangalore and my phone started to show the correct carrier name, as soon as I entered to Karnataka cirlce from A.P. circle(I was on roaming). I think it's Airtel that relays the name as such in Hyd(A.P.) and it's nothing to do with the device. So, my problem is solved.
    Hope this helps.

  • Changed apple password but in iphone still it shows wrong

    i wants to erase data on my Iphone, but as i press the Erase all content in iphone for resetting, shows wrong password popup.
    i already changed my password several times but i don know why in Iphone the new password is not valid.
    i need your support .

    Just to confirm is it asking for passcode or Apple ID password?
    If it is asking for the Apple ID password then you have Find My iPhone enabled in Settings>iCloud. Make sure the Apple ID is correct in Settings>iCloud and that you are providing the correct password for that Apple ID.

  • OS has wrong time zone, so db has wrong time zone after RAC db installed

    hi Guru, after the RAC db installed, and it is a alive production DB, then I realized that the os has wrong time zone which is MDT (mountain time), I want it as CDT, so I am planning to ask sys admin to change os to CDT, then I just need to bounce the db once os time zone changed? Is that right? that won't corrupted the db after os time zone change right? And this is 2 nodes RAC db, anything I need to be aware before os level timezone change?

    Hello;
    Fix the time on the OS and restart the database and you should be done. Simple as that. So to answer your question Right.
    Best Regards
    mseberg

  • Countdown Timer Stuck In Wrong Time-zone

    Hopefully this is a simple one folks. Is there a way to change the time-zone of the countdown timer? It's in central time and I'm eastern - weird huh?

    I had the same issue, it annoyed me for quite a while, and I couldn't find a solution on the web.  I then looked at "Settings --> Mail, Contacts, Calendars --> Time Zone Support" and saw that it was stuck on the wrong time zone there (which coincided with the time zone my calendar was in).  I switched off Time Zone Support and switched it back on: that corrected it.  I then returned to my calendar app again, and it was in the correct time zone.  That solved it for me.

  • Is my iPhone calendar reading from the wrong time zone? How do I fix it?

    First, here is all the info that I have about all of the clocks on my phone: the date and time on my iPhone are set automatically to Vancouver's time zone, in the Clock app though, I've also added in the clocks for Seoul and Manila so that I know the time when I need to contact friends out there, etc. Location wise, everything else on my phone is fine: my map correctly shows where I am, the weather app shows the weather for my city and my clock changes automatically for daylight savings.
    Now, when I put in an event into the calendar app, while putting in the details such as start and end time, the Time Zone slot is always set to Seoul for some reason. I have to go in and change it to Vancouver manually. Even after doing this and setting everything though, the alarm always goes off at the wrong date and time - I think it' s going off at when that time reaches Seoul, not Vancouver. So then I tried setting it again, this time, leaving the time zone as Seoul in case things were somehow just 'backward' in my phone, and still the alarm went off at the wrong date and time.
    I really can't understand it and haven't got the faintest clue as to how to fix it. Any ideas??
    In case this better or further explains what I'm trying to say:
    I just opened a new event on my calendar. I set it to begin twenty minutes from now (5:20AM) and left the ending time as the default one hour later (6:20AM). I also did not change the time zone which is already reading Seoul for whatever reason. I hit done, I'm taken back to the main calendar page, and there it shows as it should: 5:20AM today. I then went to set second event for 5:15AM only this time, I changed the timezone to Vancouver. All the information looks correct, but this time, when I hit done and am taken to the main calendar page, that event is recorded as having been set to 21:15PM instead!!
    [ I have an iPhone 4 but...I don't know what CDMA or GSM means so I'm not sure which pertains to me...]

    Go to Settings>Mail, etc.>iCloud and delete the account. Then add in a new account with the details you want.

  • My iPhone automaticly detects a new time zone, but updates the time wrong.

    The time back home is 22.00, and the time here is 20.00. It detects the right time zone when I check in the settings, but my iPhone and iPad, my boyfriends iPhone and iPad all show 21.00 as the time. I have tried reseting it, but doesnt help. Any suggestions?

    Do you have the iPhone set to adjust the Date & Time automatically in Settings > General > Date & Time? If you do and it's wrong, you'll want to contact your carrier because the automatic time is provided by them.
    If that isn't it, this Apple doc might help -> iOS: Troubleshooting issues with date and time

  • Getting an error message: "if you are here, it is probably because your computer's clock is wrong."  Ergo, I can't get to the page I need.  My clock's date and time are right.  After re-booting, went to wrong time zone, which I changed-- still getting msg

    Getting an error message: "if you are here, it is probably because your computer's clock is wrong."  Ergo, I can't get to the page I need.  My clock's date and time are right, but time zone was wrong-- changed & saved it, but still getting error msg

    'Requires=network.target' wasn't in it so I added it but nothing's changed. I've left it in because openVPN does require network.
    As I said, I had this problem with a script so I don't think it's anything specific to openVPN. I had a weird occurrence this morning however. When I started the computer up this morning  openVPN worked just fine. However when the computer rebooted openVPN couldn't resolve the host address again.

  • IPhone 4s text messages - wrong time / date

    Hi all,
    My iPhone text (BOTH sms and iMessages) are showing the wrong time and date.
    EG. Got a message at 16:00hrs today and it is showing Saturday for the date and time... But when I open the message up it shows 28 Dec 11 16:00 but then when I got back to messages it showing Saturday.
    This is the same for text and imessages
    Help anyone ? Please
    Cheers

    I have Verizon and it happened yesterday in Denver.
    I believe when the time/ date source goes bad (yesterday my phone changed to April 22 2014 on February 4th 2014. When the time goes bad iMessage shuts down due to the time error mismatch with the server.
    I set the time/date/time zone manually and iMessage would connect again.
    Today I switched back to set time automatically and it was working again.

  • HT4623 iOS 8 version 8.1.2 issues with the calendar displaying wrong TIME ZONE!

    I just updated to iOS 8 using version 8.1.2 and am having issues with the calendar.  I use my GMAIL calendar and sync to my iPhone and now any calendar entries that I add from my phone display the current time zone AND GMT time.  Entries that were already there display correctly.  New entries entered from the GMAIL calendar also display correctly.  The issue is with NEW entries entered on my PHONE into the calendar.  This is very annoying and causes problems for new entries that need EDITED.  Once opened to edit it defaults to GMT time!  WRONG!!  I have turned off the automatic time zone feature and Time Zone Override in Settings but it's still WRONG!  There are multiple reports of this online so I would like to know when/if it will be corrected or if there is a fix!  Please help!!

    Quite the same problem here, GMT, UTC.......
    Why when they do an update they don't check it completely???

  • JDKs in weblogic server return wrong time zone

    Hi , i am running weblogic server 8.1.4, 8.1.6 and 10 on my windows vista
    all of the JDK bundled (both Sun's and JRockit) return GMT instead of my local time zone when i call Timezone.getDefault()
    I am quite sure the operating system has set to correct time zone because my self installed JDK (downloaded from sun) works properly (return correct local time zone)
    is that i have missed anything?
    please help.

    I am noticing the same problem with iCal events imported from Orbitz. The thing is that the more I look into it the more I think this is meant as a feature, not a bug. Go into iCal preferences > Advanced and uncheck "Turn on time zone support". Import the event again and this time both the graphic view and the Get Info view will display the same information.
    It appears that this setting is meant to be useful if you travel to different time zones a lot. Basically, with it you get a time zone dropdown menu in iCal. So when you are in a different time zone you can select it from the dropdown and it will show what time your events occur in your new local time. Just keep in mind that when you create a new event it will be created based on the time zone you have selected. So if you are in California and have selected that time zone but you are adding an entry for a meeting you have when you are back in New York make sure that you select the correct time zone when creating that meeting because by default it will be created in California time and when you return to New York and switch your calendar back it will show the event at the wrong time.
    Frank

  • I would like to display two system clocks for different time zones

    I would like to display a couple of time zones on my system clock. Can this be done? Like having my current location date and time and another showing the date and time for Madrid, Spain.
    If this can't be done, how do I add clocks (or calendars) to my desktop?

    In the widgets screen, click the + sign in the lower left.  This should show you the widgets you have.  World clock is the one your looking for and may not be on the first screen.  There's an arrow on the far right side to slide to the next screen.  When you find World Clock just click on it and it will add a clock.  Click again and it adds another one on top of the first.  Grab the clock anywhere on it's display and drag it to the desired location. 

Maybe you are looking for