IPhone screen turns off immediately after a message is sent.
I am using an iPhone 5S (Running iOS 7.1.1) and whenever I send a message, as soon as my finger taps send, the "lock shutter" blacks out the screen and then unlocks itself after a few seconds. Anyone have any ideas?
Hey there 4cpukid,
It sounds like you are experiencing an issue where you tap Send in the Messages app and your phone unexpectedly goes to sleep. I would quit all the running apps on the device first:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that reset the phone and test the issue again:
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
All the very best,
Sterling
Similar Messages
-
Hi, I have an iPhone 4s running iOS 7.0.4 and the phone keeps going of whenver battery level drops to 20% and it give the warning. It turns off immediately after I dismiss the warning message. I LOCKED THE PHONE AT 21% and I was able to play music to 4% which means there is no problem with the battery, this seems to be a programming error.
Earlier suggestion include that the battery has a dead cell but it wouldnt keep playing music for over 2 hours it it had a dead cell.My issue with IOS 7.1 and higher is my Bluetooth for the phone still works...no problem but the music does not work with bluetooth...I have an Acura TSX 2010...Acura said there are no incidents reported, but me...I just upgraded to IPhone 6 and still no good....as soon as i hit the AUX button it say USB...not bluetooth...ugh
-
My iphone 4 turns off automatically after screen lock
Hello guys,
my iphone 4 turns off automatically after screen lock, i have to press the POWER + HOME button during 10 secondes for reboot.
And it's like that every time i lock the screen.
Please can someone help me ?
thanks.Standard troubleshooting steps are reset, restore, restore as new.
Since resetting isn't working, try backing up and restoring through iTunes. -
hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out
To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support -
My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?
We can't know if there's a "fixture" because we can't examine your phone. But Apple can. Make a Genius Bar appointment and get your phone evaluated.
-
Screen turns off immediately when setting systemIdleMode to NORMAL after having been in KEEP_AWAKE
I've found a little issue in Android...
In my application I download some files the first time it's run. Since it takes a couple of minutes without user input, the screen turns off automatically. I've found some tablets not only turn off the screen but also interrupt the download altogether when going to sleep, so to avoid this I'm using this to prevent the screen from turning off (is there any other workaround to prevent downloads being interrupted by sleep?):
NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.KEEP_AWAKE;
Of course, I've also added the WAKE_LOCK and DISABLE_KEYWARD permissions to my app descriptor, so the above code works. The problem is that I don't want the app to stay awake all the time, so after the download finishes, I'm setting the screen back to normal with:
NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.NORMAL;
But after executing that, the screen goes off immediately, instead of waiting for a minute or so before dimming the screen. It's as if the dimming was triggered already during the download process, but didn't actually happen because of the KEEP_AWAKE setting, and then when switching to NORMAL, the screen dimming takes place immediately so it turns off.
Is this an intended behaviour or should I file a bug?
How can I manage to set the systemIdleMode to NORMAL but still have the screen on waiting a bit before going to sleep? Turning off the screen as soon as the download is finished is confusing for the user, who might think the app has frozen when it's really just in sleep mode (and the user has to unlock the screen before going back to the app).
This happens in just about any version of AIR 3.x (and probably below).
Also, it happens in iOS as well, but it's less dramatic because the screen just dims a little (app is still visible) when setting systemIdleMode to NORMAL, instead of turning off completely and locking the screen, which is the behaviour in Android.undereyes wrote:
this work with iOS 6.0, me app lock
What do you mean? That it doesn't happen in iOS 6.0 anymore? What do you mean with "me app lock"? Please, elaborate -
IPhone 4 turn off randomly after one or two days. Need reset again and agin.
Hi,
My iPhone 4 is about 2.5 years old. Few days back it turned off suddenly while i was calling. It was not turning on from power button so I reset it by pressing home+power key. It starts and work normally. After few days it again turned off and i again reset it. Now this behaviour is continueing. I have tried reseting it but issue not resolve. Please help to fix thisHey Tiffy6996!
I have an article here for you that describes this issue and can help you troubleshoot the issue a little further:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
IiSight turns off immediately after connecting
Firewire connection OK
Camera is OK
When I connect the camera the green light turns on for a second or to then turns off.
When I open Ichat AV (3.1.5) /preferences/video I receive te message «Isight does not respond»
The problem is the same on my powerbook
Both nachine have system 10.4.7
Help!Here are the specs for your Compaq Presario SR5280CF Desktop Computer. According to the specs, the computer came from the factory with a 300 watt power supply. Please read and follow the instructions in this HP support document entitled "Troubleshooting Power Supply Issues" for a possible resolution. Post back with the results of your troubleshooting efforts.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
5800 turns off immediately after pressing the call...
Hi guys had my XM about 8 months now and it's just started to turn off as soon as i attempt to make a call. It starts to make the call then just goes to black screen and off. Incoming calls and txts are working fine so it does not look like a hardware issue.
Any suggestions before i re-flash the **bleep**nagendranr24 wrote:
You can try soft reset.Dial *#7370# and enter lock code(12345 by default).
Further to this,
1. Do not forget to take a backup before doing this...
2. Use your set lock code if you have changed the default... -
Really need help asap.
Hi there SadiqC,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W. -
MBP (early 2008) turns off immediately after startup
Machine was working great when I left work Friday. When I got into office Monday, noticed machine was extremely hot and in sleep mode.
Machine wouldn't wake up, so I powered it down and let it cool off.
Machine has cooled off but won't boot up - every time I try the light on the lid button lights up full brightness for a second, then goes dim, then goes out totally within a second.
From what I've seen through searching the forums, this could be a power supply issue. Any tips greatly suggested.Take a look at this knowledge base article on MagSafe first and rule that out.
Any of the items you list could be an issue. The best way to find out is a visit to an Apple genius bar where they can run some diagnostics and see where the problen is in the system. -
Can someone help me regarding my concern? It is a bit impossible for me to send back my iPod to where I bought it because I am already back in the Philippines. What are my other options considering that I live miles away from California already?
First, try the usual steps: restart, reset, restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414
If problems persist, call Apple Support at 1-800-1441-0234 or look for an authorized service center in your area:
http://www.apple.com/ph/service/
Regards. -
IPhone Screen Turns of Randomly
Sometimes when I am in the middle of something the iPhone screen turns off by it self, when I press the power button to turn it back on, the screen flashes a black screen and I have to lock and unlock it again.
If anyone has an idea why please help. Thank You.
Info may help:
My iPhone is unlocked with SimFree
I have the 1.0.2 Version running
I have 2 Native Apps (Apollo and Navizon)To expand on this a bit:
We really can't help you because your phone and my phone are not the same. The process of unlocking the piece could have altered parts of the OS in ways neither of use could know.
Since we do not have a common frame of reference, its is not possible for us to assist in your dilemma. -
My Iphone 3GS turning off and on by itself...
Suddenly my Iphone 3GS turned off and after 3 minutes it turns on again, and so on.The battery is fully charged. I've tried to reset it but still won't work, I've switched it off and on again after sometime and still won't work. Any advice/help please.
this is happening to my phone, i changed the battery, i tryed the logic board in another phone and it worked fine, there dosnt seem to be much else in there, still cant get it going.
-
My iPhone randomly turns off, mainly after I have been on the phone for 5 minutes or more, but it also turns off whilst playing games and sometimes even when it is just in my pocket doing nothing.
It can be really annoying during important phone calls or when I have been on hold for a few minutes and then just as I get through it cuts off.
It turns back on straight away, but I have to go through everything again.
It has done this since pretty much one month after I got it.
I have reset and I have all the latest updates, the support page doesn't seem to cover this problem.Assuming that your phone is not jailbroken or hacked in any way, restore the phone in iTunes, first using a backup, and if needed as a new iPhone, without using a backup. If restoring as new doesn't help, there is a hardware failure and you need evaluation by Apple or whoever provides iPhone service in your country.
Maybe you are looking for
-
"Effects" panel empty/blank in CS6?
I am running Adobe Premiere Pro CS6 on Mac OS 10.9.3. Every time I open Adobe Premiere Pro, regardless of the project, the Effects Panel (not the control panel) is empty/blank. There is nothing typed in the search field, and if I do type something or
-
RE: Need help on cornering the APO BI issue relevant to Planning area
HI Guys, Iam loading historical data from my infocube to APO planning area... MY Planning will be done in apo for weekly based.. for thatmy client has configuired Fisc VArnt which is specific for 48 periods but not 52 periods... My clinet will be pla
-
I just want to make it go back to spry tabs default like when I started.
I am new with spry tabs and I was messing around with the css changing things " this is how I learn trial and error" well I clicked something and it messed up my tabs and so I though no prob I will just start over but when I go to put the spry tabs i
-
Access 2013 Email Report ribbon button always disabled
Access 2013 Email Report ribbon button is always disabled. This happens on one PC, All other installs are ok. Reinstalled Office and Access and problem continues. System is Win 8.1 Default email client is Outlook 2013. Any suggestions?
-
[Forefront for Exchange] Disabled vBuster engine keeps trying to update and sending emails
Good day and thank in advance for any help. As object, I've disabled vBuster from my FPE, both updates and scans. I have also set "update once" on the scheduling for it (even if it's disabled). Sadly It still keeps sending me an email every our telli