IPhone screenshot quality is low when capturing images. Why ?

I took screenshots in iPhone5 and the Quality of the PNG screenshots is low.
This happens only when we are capturing a screenshot in the iPhone which has image in it's screen...
If the the screenshot has GUI of an App, it has 100% Quality in the screenshot.
I am a UI designer & I would like to show my works by the iPhone screenshots in PC..
I suggest you to check out the same before answering my question..
I have attached the screenshots (includes zoomed view)...
Any solution for this ? Am i the only one who have this problem ?
Screenshot Details :
- Taken in iPhone5 and iPhone 4S
- in iOS7
- Taken October 11, 2013
- images imported by Syncing to iPhones in iTunes and exported to PC

Sorry i forgot to add the screenshots..
Below are the Original image and iPhone Screenshot :
Below are the zoomed view of the above image showing difference between actual UI image and iPhone screenshot :
Original
iPhone screenshot :
Below is zoomed screenshot of Passbook App : (100% Quality because it's GUI)
Below is the zoomed screenshot of Above Passbook screenshot in iPhone screen :

Similar Messages

  • IPhone 4 soundis very low when headphones are used

    my iPhone volume is extremely low when i plug headphones in when listening to Netflix, Pandora, etc. When i unplug the headphones, the volume is normal when coming from the speakers in the phone- this only happens when we use headphones. We took the phone to the Apple store yesterday and they completely replaced the phone with a new one- and the new one is doing the same thing- you can barely hear anything when headphones are used.. all our sounds are turned all the way up- if there a way to configure the sound settings in iTunes for your iPhone???

    This sounds silly but did you remove the plastic tabs covering each ear plug?
    If so then read here : http://support.apple.com/kb/TS2802
    Good Luck

  • When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, even jpeg files. This is a NEW frustration.

    When capturing images from a Nikon D600, they show in Bridge, but when clicked to load into CS6,an error message says that it is the wrong type of document, evne jpeg files. This is a NEW frustration.

    Nikon raw files would open up in Adobe Camera Raw and so should jpegs.
    If you select one in Bridge and give the command "Ctrl r" (Windows), what happens?
    Also what is the version of ACR in the title bar?
    Gene
    Note: unmark your question as "answered". the green balloon next to the subject shows it as "solved".

  • Sound on my iPhone 4 , turns really low when I plug in my headphones or a device then turns back to normal when I plug the headphones/device back out , tried turning off , using the troubleshoot turn off and shouting at it please help

    The sound on my iPhone is perfect until I plug in speakers or headphones
    Then the sound halves and won't turn all the way up, when I do turn it up the
    Sound just switches off till I turn it back down low to wear it works ,
    When I unplug headphones/device sound returns to normal

    Normally, an iPhone will remember what you had your volume set to right before you unplugged your headphones last and set the volume back to that when you plug them in again. Do you have a habit of tuning your volume down before unplugging?

  • IPhone 4 screen jumps around when displaying images.

    Hi guys,
    My iPhone 4 has randomly started behaving unusually when trying to display images. The problem is at it's worse when using the camera or trying to display photographs. The lighter the image, the worse the problem.
    The display seems to shrink and stretch rapidly from the bottom of the display. I also begin to see what should be the top of the screen appearing at the bottom.
    Any ideas what could cause it? The phone recently had a new screen fitted.
    Thanks in advance!
    Sean

    Here is a still of the screen... http://www.flickr.com/photos/43074185@N05/12239963166/

  • Poor quality RAW file when captured on Nikon D80 and imported

    Anyone,
    I shoot a Nikon D80 and when I import the RAW files, mostly when shot in RAW+JPG(fine, normal, basic) format, the RAW file turns out in very poor quality, usually alot of Noise in pic. It never use to do that before, is it just because it is coupled with +JPG files? Help would be greatly appreciated.
    Cheers

    I am also using a D80, and just recently switched from jpeg fine to RAW thinking it would give me some more flexibility in the post processing ... but I too have found that the images are very grainy...I'm a novice at some of the cutting edge digital editing technology... hence the use of Iphoto... but I'm disappointed that it seems my image quality has suffered.
    any thoughts?

  • The volume on my iPhone 5c is really low when playing music out loud.

    When I am playing music out loud it is far too quiet. It is actually louder when I put headphones in without putting them in my hear than when I just play music out loud. What could be wrong? It's really annoying me.

    Hello, asialeighx.  
    Thank you for visiting Apple Support Communities. 
    I understand you are experiencing an issue with the sound volume on your iPhone speakers.  Here are some troubleshooting steps that I would go through for this issue.  
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker
    Cheers,
    Jason H.

  • I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?

    I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?

    Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

  • C7 captured image quality

    i got a c7 like a month back everything is perfect but one thing is out of my understanding when i open my camera there are no lines but as i take the pictures without flash  i get lines on my captured images although there is sufficient light in the room resulting in a poor capture quality.   i have changes many settings only this issue ends if i switch to night mode even in normally lighted room
    when ever i take a picture in sunlight or open  areas there are no lines at all but at times there are exceptions.. 
    i realy look forward to ur fuidance ppl 

    Hmm, that is odd. Looks like the phone could be faulty. First I would tell you to try updating or reinstalling firmware. You also did not mention if you were already using Symbian Anna update which came with camera tweaks. If it does not solve, you'd have to take it to a Nokia Care Center.
    Here's a sample c7 picture
    http://st.gsmarena.com/vv/reviewsimg/nokia-c7/camera/gsmarena_004.jpg
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • My address book and iPhone pics have become low resolution.  Is there a way I can prevent this from happening when I start out with a higher resolution picture?

    I guess I squeezed my entire issue into the subject line.  lol   When I sync my iphone to my laptop I notice that all my address book pics and iphone pics have become lower resolution, even though I started out with the resolution that I really needed to produce decenty address book printouts.  I doubt I can correct the losses of resolution that have occurred but can anyone help me figure out how to prevent future losses?  Thank you!

    Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
    SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
    '''''Address Bar Search'''''
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
    (3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
    Does that work?
    '''''Search Box'''''
    Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
    Do either of those work?
    There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am.

  • Administrator account is disable when deploying windows 7 x64 captured image

    I’m using MDT 2012 update 1. I create one deployment share with two task sequence.
    The task sequences are: one for windows 7 x86 and the other one is windows 7 x64.
    Both are working fine until I try to sysprep and capture with all the windows updates.
    Sysprep and capture windows 7 x86 with all windows update work fine. I’m able to deploy the captured image without an error.
    My problem is with the windows 7 x64 captured image. I’m able to sysprep and capture the windows7 x64 with all the windows update. Once the capture is completed, I change the .win file in my windows 7 x64 task sequence to point to the new .win file (capture
    image with all the windows update). When I deploy windows 7 x64 on a pc, the OS get install but boot up to the sign on screen. The Task sequence does not complete. No error message. Cannot log in as local or domain administrator, account is disable.
    Why does it work with my windows 7 x86 image and not with my windows 7 x64 image?
    With my windows 7 x86 image the task sequence completed successfully with no error and it logon automatically in windows but not with my windows 7 x64 image.
    Both task sequences are the same.
    Let me know if any info for this please.
    thanks

    They should both work, perhaps you missed a step when creating the x64 image.
    1. Verify that the Windows 7 x64 image was created cleanly, with no errors. Sysprep ran with no errors.
    2. Verify that you created the windows 7 deployment task sequence cleanly. I would do a windiff of the TS.xml and unattend.xml file from both folders in the deployment share.
    3. Try running without a domain. Some domain's have a GP set to disable the local administrator account.
    Keith Garner - keithga.wordpress.com

  • When you save an image, your captured image is bec...

    I realize that when I take a picture picture from my 5800, ALL my saved images become foggy! According to preview (capture) image, preview images are NORMAL!... So I think the problem is about software based, not hardware!  I have V20 firmware .... I hope Nokia may interest about this problem!...Will upcoming 5800's firmware solve this problem?...
    Thanks.
    Nokia 5800 XpressMusic
    v20.0.012

    It always is to start with. Keep the image displayed for a few seconds and while it's up on the screen, the phone will render a sharper version and display it eventually.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Windows 7 Professional PC hangs at "Loading files" when trying to boot with custom capture image on Windows Deployment Services.

    I have created a custom capture image in WDS. Now when I try to boot my reference PC into this image the PC hangs at "Loading files". The reference PC is running Windows 7 and I am using Windows Server 2012 Standard on my server.
    I have followed the instructions on how to create the custom capture image on the server to a fault. I PXE boot the PC and it shows the capture images after I hit F12. The problem is that it starts to boot and then hangs about 2/3 way through the progress
    bar.
    Any help would be appreciated.

    Hi Derrick Logan,
    We need know the detail phases your client hang, if it is irregular status, please collect the WDS log then post it. You can refer the following similar thread solution first.
    How to enable logging in Windows Deployment Services (WDS) in Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, and in Windows Server 2012
    http://support.microsoft.com/kb/936625/en-us
    Windows is loading files... Hangs on WDS
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/baacadc4-830d-43e1-ace8-3292e886958e/windows-is-loading-files-hangs-on-wds?forum=winserversetup
    WDS hangs at "Windows is loading files..." on a LAM jhl91 laptop
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/3ebb6e0b-9f05-4fee-b3c0-129c34bb879d/wds-hangs-at-windows-is-loading-files-on-a-lam-jhl91-laptop?forum=winserversetup
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • WDS 2012 Black Screen when trying to capture image

    I'm currently having an issue trying to capture windows 8.1 Enterprise image using Server 2012 R2 + WDS for deployment.
    All the usual steps have been followed, images added from the install media used to set up the initial machine, DHCP configured and PXEBoot works fine for the deployment image (it loads, I get an ip, can access reminst share) but when I boot in the capture
    image I get nothing but a black/blank screen.
    Initially when I booted in to the capture image I was receiving an 0xC000000F error but by adding the network driver to the capture image it resolved that issue and it gives the blue windows logo and starts loading but then goes black. I've subsequently
    tried to add all available drives for this machine from the HP site but made no difference.
    WDS server is a hyper-v VM and the box to be capture is physical, both on the same vlan.
    Any one experienced this?

    I did not find any help with this. I was able to get a native boot.wim and install.wim to work from the installation media (with driver injection - which I must say is way easier in W2K12). However the capture did not and will not work. VERY frustrating!
    I wound up doing a WDS basic OS install then I had to manually touch 24 boxes to install the rest of the software (still not quite done after three solid days of work).
    Also, I should point out: I am targeting Dell Optiplex 790s. I'm using the PE 5.0 drivers which work fine. i also downloaded the Dell Optiplex 790 driver set and injected those as well, even though they are targeted for Win 7, not Win 8.1. 
    Interestingly, if I updated the old system bios (A05) to the new (A18) the machine couldn't even contact the WDS server. It was working before at A05 and then completely stopped at A18, requiring me to do a complete full install from installation media.
    Way to go Dell! This is why people are switching to Lenovo.
    Best,
    Bill

  • Iphone 4 auto shut off when battery 20% and lower.

    My Iphone 4 auto shut off when battery 20% and lower. The phone is only 1.5 years old. Can I know why this happen?

    Most commom reason for this is faulty battery. You could try Restore with iTunes on computer, at end when prompted, Set Up iPhone as New. If still problem and you have AppleCare, take to Apple for resolution. If no coverage, make Genius reservation and take to Apple Store for quick free battery diagnostic testing.

Maybe you are looking for