IPhone SDK: UIWebView - How to get the anchor information from URLRequs

I was planning to use the UIWebView but i am stumped now.
When the user clicks on a hyperlink, the web view delegate shouldStartLoadWithRequest is called and it does not contain the anchor information.
For e.g. if the href is say #01_02. This to a normal browser is a local anchor. The URL in the NSURLRequest contains just the file name information not the anchor.
In my particular case a anchor can be some other view of the topic which i will generate and keep it ready for the browser at this point. But since i don't get the anchor information it just shows the current page.
Is there a way to get the original value encoded in the HREF?
Thanks in advance,
-TRS

I may not have understood your question but if you want to pull out the anchor information out of a request, have you tried the fragment property of the NSURL object?
// request is type (NSURLRequest *); within shouldStartLoadWithRequest
NSString *fragment = \[\[request URL\] fragment\];
Usually this will have the anchor without the #, in your case 01_02.

Similar Messages

How to get the anchor tag values in next jsp

Hey all,
I have two jsp files.
in first jsp,
I am getting the resultset.
I am setting the resultset to the anchor tag.
below is the code...
<a target="_top" rel="contents" rev="contents" class="fordynamiclabel" href="ASCMasterTwo.jsp"><%=rSet.getString(1) %></a></td>
whenever he click on any anchor tag,
It will goes to ACSMasterTwo.jsp page for edit the compleate record.
how to get the anchor tag value in that page...
Please help me on this.

You have to pass a parameter. An id is good.
Of course you have to get an id from somewhere in the result set right?
<a target="_top" rel="contents" rev="contents" class="fordynamiclabel" href="ASCMasterTwo.jsp?id=<%= rSet.getString("id") %>"><%=rSet.getString(1) %></a></td>Then you call
request.getParameter("id");
and look up the values related to that id in the database.

How to get the return values from a web page

Hi all :
how to get the return values from a web page ? I mean how pass values betwen webflow and web page ?
thank you very much
Edited by: jingying Sony on Apr 15, 2010 6:15 AM
Edited by: jingying Sony on Apr 15, 2010 6:18 AM

Hi,
What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
Regards,
Karri

How to get the log information when using a class?

Hi All,
I have a simple question, which I don't know how to solve. I am using org.apache.commons.logging.Log and LogFactory to do some logging. A typical situation is exemplified in the following code snippet.
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
class LogClass {
    private static final Log LOG = LogFactory.getLog(AClass.class);
    public void logit(){
        LOG.debug("This is the debugging log.");
public class AClass{
    public static void main(String[] args) {
        LogClass l=new LogClass();
        l.logit();
}But this way, I do not get the log information from the class LogClass. Could anybody please help?
Many thanks.

jschell wrote:
jverd wrote:
...configuration in log4j.xml or log4j.properties.And far as I recall you need one of those two also. If there is no config then there is no output.I thought it used some default config if no file is present, but I could be mistaken. Either way, it adds to the possible problems that the OP could be having, any of which are consistent with his rather vague question.
1) He's passing the wrong class to the LogFactory, and hence getting a logger with the wrong name, so he's seeing a different name than he expects in the output that's being produced.
2) His config file does not contain the proper format to include the actual classname, independent of the logger's name, so he's missing a piece of desired information in each line of the output that's being produced.
3) His config file indicates a threshold that's less verbose than the level at which his code is logging, so no output is present when he wants it.
4) His config file is missing (or not where it's expected to be), so no output is being produced at all.
5) His config file is missing (or not where it's expected to be), so a default level or format is being produced, effectively the equivalent of one of the misconfigurations described in #2 and #3.
Since the OP seems to have vanished, we may never know.

I tunes has stopped working in windows 7 and I don't know how to get the crash information that everyone else seems to get to know what the cause is....any help? I have a toshiba windows 7 computer.

I have a toshiba computer and it is windows 7, recently after I installed imatch everytime I open itunes I get the message 'i tunes has stopped working' and windows cannot find a solution and has to close. There is no solution and I don't know how to get the crash information on my computer....can anyone help as I want to finish downloading all my songs to match to be available on my mac products.

Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

How to get the current week from sysdate?

Hi sir,
i want to know how to get the current week from sysdate?
thanks

Hi Nicolas
It seems you like to check my post and also make commend ;) thanks for your attention
Have you ever read the posts above and given solutions ?Yes, I did
Have you read the docs ? Yes, I checked
What's the added value here ?Did youYou shared doc with solution(long one), I shared short one which point same solution(Check what Joel posted)..So what is benefit, As you can guess oracle docs are sometimes become so complicated as specialy for beginner...(At least it was like that for me and Belive me somedocs are still sooo complicated even for oracle coworkers ) But for you I dont know ;)
=> Why writting the PS in bold ?Why.. Let me think... Ohh Maybe I am looking some questions(many) and even user get answer they should not changed status so I am reading some posts and try to get problem and loosing time..
So I am putting that PS wiht BOLD because I dont wanna lose time my friend ;) Because While I am trying to help ppl here In same time I am trying to giving support to my customer prod systems. Which mean time is very important for me...
Hope my answer could satisfy you..
One important PS for you.. You may not like my posts (or someone) but my friend I become tired to read&answer and make commend to on your comment which is about my posts.
I am not newbie in forum(At least I fell like that) and I belive I know how I should make post..
Thank you
Regards
Helios

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

How to get the report name from the call stack

Hi,
I have a question about how to get the caller information dynamically in a function module.
For example.
ZGET_CALLER_INFORAMTION,
get the caller name -- how ??
Thanks in advance
Best Regards,
Johnney

Hi,
You can use SY_CPROG - caller in external procedures, bye using this u can get the progam name.
Regards,
kavitha.k

How to get the date starting from 1 to the current date from the system dat

Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,

concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
    call function 'HR_JP_MONTH_BEGIN_END_DATE'
         exporting
              iv_date             = sy-datum
         importing
              ev_month_begin_date = gv_begda
              ev_month_end_date   = gv_endda.
Regards,
Ravi
Message was edited by:
        Ravi Kanth Talagana

How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

Hi,
Thanks for the suggestion. I've been playing around with some of the classes of the java.net package and java.io
Using the URL class i can get the content of the data from a STATIC page and output that response to file so that is does not display to the client broswer.
But this only works if the URL i give points to a static html page.
So the problem i'm getting is if i'm righting in arguments in the URL, this means that server needs to process the arguments i give and its sends back a dynamic result. Because its dynamic the URL class can not handle this and throws me an exception everytime :(
Have u ever tried to do some things like this?
Rahul

How to get the Database type from weblogic Db connection

I want to use database version control in my application . that means different database type use different Sql Statement. Such as in weblogic7.0 if I create SqlServer JDBC pool then I will use some special Sqlserver sql Statement . such as some join statement. If I create Oralce JDBC pool then I have to use different Sql statement . because these two database support different Sql statement.
What my question is how to get the database type from the connection.

For a normal jdbc driver you can use
Connection.getMetaData()
To get the meta data, in particular the getDatabase...() methods.
That might or might not work.
However, at the very least in the server you have access to the weblogic properties so you can parse the pool property to figure it out.

How to get the spool information for a job

Hi,
After a job is run, how to get the spool inforamtion. which API can be used.?
Thanks in advance.
Johnney.

Hi,
thanks for your reply.
My requirement is as followings.
1. Report Z_REPORT_TEST
EXPORT RUNUUID = '****************' TO MEMORY ID sy-repid.
2. In Funciton Module Z_FM_test
            create a job(Z_JOB_TEST) to run report 'Z_REPORT_TEST'.
            after the job is run successfully.
            question is
            how to get the RUNUUID exported from the report ????
Thanks & Best Regards,
Johnney.

How to get the XML messages from JMS Queue in BPM

I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
can you please send me the code to get the XML messages from the JMS Queue.
Thank you,

Hi,
Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
artifactInfoNodes as Any[]
xmlObject as Fuego.Xml.XMLObject = XMLObject()
load xmlObject using xmlText = message.textValue
. . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
Hope this helps,
Dan

How to get RMAN catalog information from Target database?

Hi,
How to get RMAN catalog information from Target database because i don't know about catalog database? is it possible?
Thanks

If you run RMAN backups of a target database using a Catalog schema in another database, the target is not aware of the catalog.
The RMAN backup script would have the connection identifier for the Catalog.
Hemant K Chitale

How to get the query values from the url in a servlet and pass them to jsp

ok..this is the situation...
all applications are routed through a login page...
so if we have a url like www.abc.com/appA/login?param1=A&param2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanks

ok..this is the situation...Sounds like you have a bad design on your hands.
You're going to send passwords in a GET request as clear text? Nice security there.
Why not start with basic security and work your way up?
%

IPhone SDK: UIWebView - How to get the anchor information from URLRequs

Similar Messages

Maybe you are looking for