IPhone sensor ( auto rotate ) Doesn't work !!

Hello
I bought an Iphone 4S-16G last week and I understood that on of my Iphone sensor ( auto rotate ) doesn't work it means when I landscape my iphone my messages or photos or in a games doesn't rotate , Now what should I do ?
I already restored and turned off and turned on and checked rotation option in portrate oriention by double clicking but it didn't work .
Please Help me .

oops my bad, you did say exactly that you had tried that. Sorry. Also you already Restored too. Only thing I could add, is to Restore as New iPhone, at end of Restore when prompted Set Up as New iPhone. And then see if better. Anyway, iPhone 4S has full Warranty, make Genius Reservation and take iPhone to Apple for resolution.

Similar Messages

  • Blackberry Torch 9810 auto-rotat​ing not working !

    Hello guys my friend just bought a Blackberry Torch 9810 few weeks ago , only two weeks I think.
    And yesterday she found out that the auto-rotating doesn't work - that is the first time she tried to rotate the phone because she want to stream a video. 
    Hard or Soft reset has been done , reboot has been done , sliders not open , no rotation lock apps has been installed.
    Is this the sensor problem ? I mean , the phone is like brand new and just bought two weeks and the sensor got problem so fast ?
    If anyone knows that exact and working solution please help ~ 
    Thank you. 

    Hi and Welcome to the Community!
    I recommend that you attempt to boot into Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
    If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
    But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
    Nainai wrote:
    Is this the sensor problem ? I mean , the phone is like brand new and just bought two weeks and the sensor got problem so fast ?
    It could be...any device designed, built, and operated by humans is subject to a defect rate greater than zero. But, at an internet distance, it is of course impossible to provide an actual diagnosis, especially if the problem indeed is hardware. Only in hand evaluation by a qualified technician can truly diagnose a hardware problem.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • During video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

    during video recording the auto focus doesn't work automatically!i must have a tap on the display for to use the autofocus! Ihave an iphone 4s

    I know.  Same issue here.  When I'm not recording but have the video camera on, the autofocus works fine.  As soon as I tap the record button and recording starts, the focus is locked until I tap on the screen to focus.  I haven't used the camera all that much because of this problem.

  • IPad's auto-rotation frequently stops working.

    Hi there, my iPad's auto-rotation frequently stops working and the only way I can get the screen to rotate gain, is to reboot. It used to be once in while but now happens every day which is very frustrating. What can I do to stop this? Thanks, Siobhan

    I know you already stated that you have to reboot, but make sure you're doing it this way. I've found some that do it differently and the results can be different.
    Make Sure iOS is updated to the latest version
    Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings

  • Envy x2 auto-rotate does not work, after upgrading to windows 10. And touchpad gestures

    I have installed the latest HP Support Assistant for windows 10  and I have installed the updates  Intel Virtual Button DriverHP System Event Utility Updates failed to install without giving reason: Intel Serial I/O driver Intel Management Engine Interface (MEI) Driver In display settings  I have checked the box of "Allow the screen to auto-rotate"  In Windows Update I have updated with Update for Microsoft Windows (KB3074678)Update for Microsoft Windows (KB3074676)Update for Microsoft Windows (KB3081424)  In Device Manager under Sensors HID Sensor Collection V2, working properlySdo Sensor V2, working properly I have done deleting these devices and reinstalling them  In User Account I have created a new user with password. Auto-rotate did not work in that user    But all these have not worked. Please find a solution for me.   About the TouchPad gesture: swipping inside from the left use to switch app, now does not work.swipping inside from the right use to bring out charm bar/ action centre, now does not work  

    Yes. I found the answer here:http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-Envy-x2-13-j020CA-Windows-10-Auto-Rotate-Autorotate-now/m-p/5212887#M115445I've tried replacing the driver on Sdo Sensor V2 device with the Simple Device Orientation Sensor and rotation works just like it did on 8.1.For the record - Sdo Sensor v2 reports the device orientation continiously, and Simple Device Orientation Sensor reports it only when the orientation changes. Must be a Windows bug then.

  • The screen of my iphone is broken and doesn't work anymore. Is there a way to type in my passcode on the computer/itunes?

    The screen of my iphone is broken and doesn't work anymore. Is there a way to type in my passcode on the computer/itunes?

    No, get the screen fixed.

  • How do I get my music from Media center to my iphone. Itunes won't import the MC music library, and MC won't recognize and synch to the iphone so I can't load playlists from MC to my iphone. Itunes help doesn't work.

    How do I get my music from Media Center to my iphone 4s. Itunes 10.5 won't import the MC music library, and MC won't recognize and synch to the iphone plugged into the USB port so I can't load playlists from MC to my iphone. Itunes help doesn't work.

    Hello and welcome to the support community
    As you know, your iPhone 5 is not compatible with our iBook G4. To get your music in iTunes from your iBook to your iPhone you would need to migrate the music files to a newer intel based Mac. A Mac which has Mac OS X 10.6 or higher installed. Then sync your iPhone 5.

  • Help iPhone 4 "Power Button doesn't work", how can I get repair it and how much will cost, want to keep same phone everything works fine not power button. :(

    My iPhone 4 power button doesn't work, how can I get repair it and how much will cost, want to keep same phone everything works fine not power button not working unable used my phone. My warranty is Expired how much will cost to put it on my phone plan? Thanks!

    Hi Julio,
    Here's a link for your question:
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Cheers,
    GB

  • My iphone 5c the sound doesn't work only with earphone.

    my iphone 5c the sound doesn't work it works only with earphone.

    Hi there lavodette,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    -Griff W. 

  • HT4623 My iPhone 4S speaker suddently doesn't work properly from one week ago? How I can do? 4s is still under warranty?

    My iPhone 4S speaker suddently doesn't work properly from one week ago? How I can do? 4s is still under warranty?

    Have you tried any troubleshooting steps, like resetting you iPhone, for example?  Or restoring it?
    If not by all means do so because your problem could be caused by software glitches that could be solved resetting or restoring.
    Warranty is for one year from date of purchase and two years if you bought Apple Care at the time of purchase. If your iPhone has a hardware issue within warranty, it would be replaced by Apple.  If it is already out of warranty, you might be eligible for an out of warranty replacement where you pay a much lower amount but this varies according to the country and currency, so it is better to check with Apple or with an authorized reseller.
    You could check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • "Auto completion" doesn't work in the new ABAP editor

    Hi Gurus,
    It is quite strange that the "auto completion" doesn't work for me in my new laptop. After I press "ENTER", it starts a new line.
    Any body know this?
    Thanks a lot.

    Hello,
    Use "Tab" instead of "ENTER"

  • After update to iOS6.0.1; auto-lock doesn't work

    After update to iOS6.0.1; auto-lock doesn't work at all

    Which autolock?  Camera?  Calendar?  Game Center?

  • Hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... i didn't drop it and didn't contact with water... so should I do? please help me =(  P.S. may be I wrote with some mistakes, so I apologyze for it

    hello to everyone, I have a problem with my iPhone 5, the dynimic doesn't work... I didn't drop it and didn't contact with water...
    so what should I do? please help me =( 
    P.S. may be I wrote with some mistakes, so I apologyze for it

    Hello darkhanfromaktobe,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Have a nice day,
    Mario

  • I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

    I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

    You can solve this problem. Just follow these instructions:
    http://support.apple.com/kb/ht1212

  • TS3992 i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

    i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

    I have just created this account to tell you that nothing would change if you restored your phone.
    The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
    Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
    Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
    So IMO, it's not what you should do to erase and restore your phone.
    Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
    I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
    And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot.

Maybe you are looking for

  • AR Aging Open Items Issue in BW

    Hi Experts, We have activated 0FI_GL_4 data source and using the DSO ZFIGL_O2 (Copy of 0FIGL_O2) for data staging then load the data into custom cube ZFIAR_C01. The issue is when the AR document open in the ECC sometimes it is cleared right away or s

  • Adding Pre. account no. field from vendor master to PO header screen

    Hi, I want to add the field lfb1-altkn (Pre.acct.no.) to the purchase order header screen under org structure tab. This field has to contain the value from the Vendor Master Accounting Information View Prev.acct no. field. Please let me know how to p

  • Hyperlink Opportunity Name in a report

    Hi, I have a report which I would like to display the Opportunity Name as a hyperlink. I have tried using the following HTML segment @[html]"<a href="/OnDemand/user/OpportunityDetail?OpptyDetailForm.Id=@H&OMRET0=%2fOnDemand%2fuser%2fOpportunityHomePa

  • Renaming Folders

    I'm using Lightroom 5 on a PC.  Nothing else open.  In the Library module I right click on the file folder and the menu drops down.  I choose "rename", enter the new name, and hit return.  I get a message that says the file cannot be renamed or moved

  • Can't lock screen in KDE

    Hello guys, Please give me advice - how can i debug problem with screen locking in KDE? I don't find any similar problems in arch forums/mailing lists. This problem appeared after update. Standart Ctrl+Alt+L doesn't work, plasma applet (screen lock)