Iphone showed 4 aps. When I touched aps there were pages of aps with waiting writen under.
Can anyone help me with this problem.
That means they're being installed. Only one downloads and installs at a time, so "Waiting" means they're waiting to be downloaded. Just give it time.
Similar Messages
-
On my iphone 5s, in "photos" when I touch to enlarge, random new photos are showing as old photos. For example, let's say I'm looking in an album at a photo of a dog I took today. If I touch to enlarge- that photo of a dog is suddenly a photo of a family member taken three years ago (on my old iphone 4). This is random and has happened to about a dozen photos. This has caused me to accidently delete new photos thinking they were old ones until I figured out this was some sort of glitch. The old photos that are posing as new photos aren't even on my laptop that I plug into - they've been on my external hard drive for awhile so I don't even know how they're linking! Any suggestions??
I've tried both ways. My Computer locates the device but doesn't see the old photos, only listing the new photos.
I no longer have the iphone3; I just transferred the photos from the 3 to the 4.
Was there a format change or file type change or did the transfer process create something different? I can still see and access the old photos if I go to that album on the phone. But that's the only place where I can see them or access them. -
Why do Apps on my iPhone show updates but when I check there are no updates?
Why do Apps on my iPhone show updates but when I check there are no updates?
I check my Apps on my MacBook and it says there is 1 update but when I check that there are none.
Then I sync my iPhone with my MacBook and my iPhone says there are 7 updates for my Apps.
This is very confusing. I wish someone could fix this and make it simple and accurate to use.Sometimes the update notification comes on but updates themselves do not appear if the iOS is not appropriate for the update. For example, I have an original iPad, thus limited to iOS 5.1.1, but an app I use has an update that requires iOS 6.1.3. So I have a consistent update notification but cannot get the update. So, check your iOS and see if it is up to date.
-
My iPhone shows error -50 when connect to iTunes
my iPhone shows error -50 when connect to iTunes. What can i do? What does it mean?
http://support.apple.com/kb/TS1583
-
AppleTV 3 only showing Apple logo when connected to very new Panasonic plasma - worked Ok with older Panasonic (2007) - have reset AppleTV, tried 3 HDMI cables.
Tried again as you suggested - no luck. Ref sequence below
A. Pressed menu & down to reset Apple TV
B after reset & restart pressed menu & up buttons to change resolution. After pressing both buttons for 6 sec, LED starts flashing - released both buttons. TV screen blank. After 20 to 30 sec horizontal lines came on screen remained for 20 sec then screen again went blank. Waited for couple minutes. LED still flashing - pressed Menu button for 2/3 sec - flashing stopped & LED glows continuously. Screen blank
C. Reset the unit again by pressing menu & down. When it restarted - while LED was still flashing, got orange color screen with Apple logo in the middle. This screen remained till LED stopped flashing & then screen went blank -
Show-stopping error when I try to load/run the muse code with JQuery version 1.9.1.
Version 1.9.1, and the muse code uses 1.8.3. As you can see HERE,http://jquery.com/download/ version 1.9.0 was a major milestone release for JQuery that eliminated much of the (deprecated) functionality of earlier versions. Unfortunately, the muse html uses some of that deprecated functionality (specifically, the "browser( )" function HERE)http://jquery.com/upgrade-guide/1.9/#jquery-browser-removed. Thus I am getting a show-stopping error when I try to load/run the muse code with version 1.9.1. Other people have had this same problem (see THIS)http://bugs.jquery.com/ticket/13214.
Do you see an update in the near future?Version 1.9.1, and the muse code uses 1.8.3. As you can see HERE,http://jquery.com/download/ version 1.9.0 was a major milestone release for JQuery that eliminated much of the (deprecated) functionality of earlier versions. Unfortunately, the muse html uses some of that deprecated functionality (specifically, the "browser( )" function HERE)http://jquery.com/upgrade-guide/1.9/#jquery-browser-removed. Thus I am getting a show-stopping error when I try to load/run the muse code with version 1.9.1. Other people have had this same problem (see THIS)http://bugs.jquery.com/ticket/13214.
Do you see an update in the near future? -
respected sir, i have problem with my mac book pro 13, i shows question mark when i start up the laptop. so please reply with the convinient solution
ajit5544 wrote:
.. my mac book pro 13, i shows question mark when i start up the laptop. ...
See here > http://support.apple.com/kb/TS2570 -
My photos will not sync to my Apple TV (1st generation), ipad, iphone, or itouch. They used to be there but upon recent syncs with all devices they have all gone. I am totally baffled as I have not changed settings?
I had the same thing happen to me. It's a bug in iPhoto 9.4.2.
The first time you run iPhoto after upgrading to iPhoto 9.4.2, it "updates the iPhoto library". This sometimes tickles a bug where iTunes can see all your iPhoto albums, but iTunes thinks they are empty. Since iTunes thinks all your albums are empty, it dutifully deletes any photos from your synced iOS devices.
It's easy to tell if this is the problem you are seeing. Open iTunes and go to the photos sync panel for one of your iOS devices. If you have multiple albums checked, but iTunes shows a total of 0 photos, then you have the problem.
I spent an hour with an Apple Genius. he couldn't find any mention of this problem in their internal support system. His recomendation was to reinstall the operating the system. I suspect that this won't solve it.
The only solution I have found is to restore iPhoto 9.4.1 and the corresponding iPhoto library from your backups.
I would refrain from upgrading to iPhoto 9.4.2 until Apple has a fix for this issue. -
I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?
Headsets don't come with the iPad. All you get is the iPad, USB cable and wall charger.
Since you're new to iPad ...
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
I was setting up my pop's new iPhone 4. When I was setting up the Safari Browser, it asked what I thought was which search engine I wanted to use, so I entered Google. Problem is that I somehow made the Safari Browser open up into a Google Browser. I love Safari & can't find how to switch it back to a Safari Browser when I touch the Safari App on Pop's iPhone. Looked in settings & couldn't find how to correct my mistake. Help please.
Google doesn't, to the best of my knowledge, even make a browser for iOS. Even if they did, you would have had to have downloaded it from the App Store. And, even if you had downloaded an alternate browser (there are quite a few), they wouldn't launch if you tapped the Safari icon.
What, exactly, do you mean when you say "Google browser"? What are you seeing? -
My current version is 6.0.2. A box appeared a few days ago informing me of an update to 7 (x?). I declined for the time being.
Then a Start Page just showed up missing the bookmark tool bar. I tried to import a bar from another browser. Nothing showed up. Then, I went to "Help". First, I clicked on "About Firefox" where I was informed of an update. This time, I tried it. When I clicked on "Apply Update", I received a message; 'Update could not be installed" despite there being no other Firefox browsers running.
I went back to "Help" and clicked on "Firefox Help". A page came up with the URL in place, but the page would not load ("Cannot find server at support.mozilla.com"). After several clicks on "Try Again" with the same result, I copied the URL and pasted it into a different browser, from which I am now working.
Before sending this question, I tried the two procedures ("Manual Backup" and "Restoring From Backup") found on Bookmarks/Show All Bookmarks/Import And Backup/Restore, using both "stored backups" from Mozilla's Profile folder and "Choose a file", as well as Bookmarks/Show ... /Backup. In each case, the response was, "Unable to process the backup file".
I had previously tried another method I found on Google which involved copying and saving a Mozilla backup file (this is the file I used in the procedure above - "Choose a File") found in the C:/Documents And Settings/.../Profile Folder, then renaming the original file "backup.HTML" and saving it in a folder one level up from its original location. The Bookmark bar was to show up after shutting down and reopening Mozilla - it never happened. I replaced the original backup file.
It occurred to me to locate the Bookmark File for this browser (Chrome) and using it in the "Choose a File" method, referred to above. But there is no extension included in the file name, and I was afraid to try it.
I'm out of ideas. Is there something else to try?Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars -
Iphoto stoped working and when I opened it there were no photos.
I was looking for some photos and suddenly Iphoto stoped working when I opened it back there were no photos it was empty. What can I do ? Where can I find these photos
Give us details
What version of iPhoto/ Of the OS? What exact;y happened? What error messages did you get? What has recently changed? Why do you think this might have ahppened?
You can try Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN -
Iphone 3G shows Apple logo when starting and stops there.
Hi, I just got an Iphone 3G 16GB yesterday from a person who had it for 10 days and did not like it. Before giving it to me me he did a general reset using the optino in the settings menu. When he gave it to me the Iphone was still doing the reset and it took 2 hours and 40 minutes to end it. At the end of the reset the screen showed the Apple logo and does not go further. All of this was done with the Iphone plugged in a power outlet to avoid interrupting the operation.
I left it on for all the night just hoping it was a very long procedure but with no results (still the Apple logo and nothing else). This morning I tried to turn it off keeping the sleep/wake button pushed for some time but id did not even shut down. The only way I found to shut it down was to to push the Home button and the sleep/wake button together for a few seconds. When I tried to turn it on again pushing the sleep/wake button it showed the Apple logo again and nothing happened.
COuld someone help me?
Thanks in advance.Just to report that the problem was solved with Apple Support. They asked me to start Itunes, connect the usb cable to the computer, push the home button while connecting the USB connector to the Iphone. This way Itunes recognized the Iphone in recovery mode and restored everything automatically.
Now the Iphone is working perfectly.
Hope this helps. -
Does iphone show reception bar when it is locked to icloud
my question is about iphones locked to iClouds. If phones are locked to itunes does they show reception bar on top left corner? How is display of the phone and if there is sim in does icloud lock phone reads sim?
What do you mean "locked to iCloud". There is no such thing that I am aware of. In any case, this has nothing to do with the receptions bars displayed on your iPhone. The reception bar shows the strength of your mobile operator signal .
-
Also, I cannot unlock the phone to receive a call.
No, actually this is likely "Voiceover" got turned on by mistake.
It should be "reading back to you" what you selected (which is the highlighted box around the app)
Try triple-clicking the home button to turn Voiceover off.
If that doesn't work you're going to have to go into Settings to do it.
Tap the app so the box shows up around it- then double-tap the same app. It will then open. You have to use three fingers to swipe upward to get it to scroll down a page.
Maybe you are looking for
-
ALV for fields from multiple tables and make them editable
Hi, I am working on a forecasting report. We have created few custom table e.g. store forcaset detail for whole year month wise. tables are say sales data, budget data, forcast data etc. Now i need to make a report based on monthwise based on above m
-
Hi, When I open the adjustment brush only a partial menu opens. The brush size, density ect....but no actual photo adjustment sliders. The complete menu opens for radial filter and graduated filter just not for the adjustment brush. Any ideas?
-
Hi , Can anybody know.. I need one FM which takes the PO number and Po item and which returns ? The corresponding invoice line item details. Please look into the issue and help me ? Thanks Siva.
-
In a block of code for a class, i and trying to use the paint method to draw on a panel, and i have buttons on the jframe for other purposes. For some reason, the buttons don't appear until i move my mouse over them. Does anyone have any suggestions
-
Missing Sync and my Treo 700wx
I have read through these forums many times and found them very helpful. I thought that I would post this in order to try to help others who are struggling to make their phones talk to their computers via bluetooth. I had, up until recently, been usi