IPhone showing up as connected to my iTunes on my Mac when it is not
Hi -
All of the sudden this week, I have gone into my iTunes and it has shown that my phone is connected to my iMac when it is not. I always eject my devices before unplugging them. If I want to sync, I have to eject the phantom device before I can start the sync. My sync settings for the iPhone are 1) Automatically sync when connected and sync this phone over wifi. Has anyone seen this before?
SOLUTION!
I've been suffering from this problem for a few months. I tried everything suggested by everyone, and then, today, I had a mad idea.
I used to work in a room in the house that's about 12 metres away from the router. It's on the next storey up and horizontally about 8 metres away. The problem started when I began to work in the same room as the router.
Today I became so frustrated that for some reason I walked into a room about 8 metres away on the same level - Guess what? I connected with no problem at all. Feeling full of joy I walked back to the room where the router is located - Dropped internet connection within a few minutes! Walked back to the the room that's 8 metres away and, hey presto! I have a connection. I now realise that the problem was that I moved too close to the router.
I can think of no logical explanation for my experience, but empirically it seems to work. Does anyone have the faintest idea of why this should be the case? In the absence of an answer I think I may have to start believing in fairies at the bottom of the garden - I'm just off to set a meal for them.
By the way, I don't know if it has any significance, but the router is a BT Infinity router that has replaced the incredibly unreliable Virgin Media cable connection
Similar Messages
-
hey guys, i downloaded the new software for my iphone and now cant connect to my itunes on my mac. its an older mac running 10.5.8
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3 -
since upgrading to mountain lion my iphone no longer wirelessly connects to my itunes via wi-fi... is there a remedy for this? thanks
I am also having the same problem since upgrading to mountain lion. The symptom is strange.
If I connect my iPhone/iPad using cable first, uncheck and then check the wifi sync option, and then disconnect the cable, iTunes will still be able to see the devices through wifi. But if I restart my computer, it will fail again. And I am tired of repeating this exercise.
Anyone has the same problem? -
I tried to reset my settings in my iPhone 4 and now it won't restore my iPhone. I tried connecting it to iTunes and it won't work. How can I fix this?
Did you try to connect in recovery mode, explained in this article?
iOS: Recovery mode -
iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... -
my ipad randomly shut off and when i go to turn it on it shows a cord connecting to the itunes symbol, my ipad is not disabled by the way. has anyone else had this problem? if so does anyone know how to fix it?
Glitchs like that sometimes happen
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If sit still reocurrs a lot, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
iTunes on my iMac seems to think my wife's iPhone is connected and tries to sync even even when it is not. This has been going on for a couple of years now and I am finally trying to stop it. I launch iTunes manually to sync any number of devices we have in the household and, at least every third time I launch iTunes, it pops up my wife's iPhone and start spinning around as if it is connected and syncing but it is not. This happened to me today when my wife and her iPhone were not even in the house or even the same city for that matter! Oddly, she recently (finally) upgraded from an iPhone 3 to a 5 assuming that would finally stop it but it just kept on happening. Anyone have any idea how to stop this? Thanks!
- MattYou might start with:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
If the above reveals nothing helpful, then create a new user account. Log out of your account and log into the new account. Do the problems cease? -
tried to updated to new ios 6.1 but the prep file failed in itunes...now my iphone4s is stuck on the screen to connect usb to itunes BUT nothing happens when connected. HELP HELP
I tired reboot the phone and placing the DFU BUT still the phone reverts back to itunes logo and ucb connection sceenPlace the device in DFU mode, connect to the computer and restore.
-
ITunes sharing between Mac and PC is not working
iTunes sharing between Mac and PC is not working. No shared music appears.
PC = Win XP SP3; 192.168.1.101
iTunes for Windows 6.0.4.2
Sharing enabled / Look for shared music enabled / Share entire library
Open and running on PC
Windows firewall has exceptions set to allow traffic on TCP 3689, UDP 5353
MAC = OS X 10.4.6; 192.168.1.100
iTunes for OS X 6.0.4(3)
Sharing enabled / Look for shared music enabled / Share entire library
Open and running on Mac
System Preferences | Sharing | Services
Personal file sharing - ON
Windows file sharing - ON
Printer sharing - ON
System Preferences | Sharing | Firewall
Personal file sharing - ON
Windows file sharing - ON
Printer sharing - ON
iTunes Music Sharing - ON (i.e., TCP 3689 open)
iPhoto Bonjour Sharing - ON
Network Time - ON
ROUTER = Linksys BEFSR41v4; Firmware 1.04.01; 192.168.1.1
Functioning as DHCP server
File sharing between Mac & PC works OK
BUT iTUNES MUSIC SHARING DOES NOT WORK IN EITHER DIRECTION
Shared music is not visible
Tried turning both firewalls OFF -- still nothing
Tried installing Bonjour for Windows -- still nothing
ANY suggestions? Please help. Thanks.
1.8 GHz PowerPC G5 Mac OS X (10.4.6)Hi cbafiero,
It seems that the problem lies in your router. I'm not sure exactly what the issue is (I've just now discovered it myself), but after switching from a Linksys WRT54GX2 to a thrift store Netgear, my shared libraries appeared instantly. My gut is telling me that the Linksys routers are blocking the multicast traffic, which is stupid on Linksys's part, to filter traffic internally. I'll look more into the Netgear and see what it has that the Linksys doesn't (or vice versa). -
So I got a new iPhone about a month or two ago (I no longer have this iphone) and I bought some albums from iTunes but now that I'm on my computer (which the iphone is not authorized on) I cant seem to find out how to download the albums I downloaded. The albums were bought on the iPhone through the iTunes app that was associated with my account. The songs show as purchased on the iTunes store, but theyre not in my purchased list.
ekujala1 wrote:
I purchased a few songs from m iphone 4 and when I sync with itunes they are not showing up in my library anywhere..recent purchases, entire library etc.
With your iPhone connected, iTunes open and the iPhone selected in the devices panel, go to File menu and click "Transfer purchases"
Stedman -
Help!! My iphone shows up for five seconds on Itunes and then disappears!!
My iphone shows up in itunes for about 10 seconds. Before I can do anything, it disappears. I upgraded to the new software today. I already tried a soft reset by pressing the top key and the home key.
I am so frustrated!!!!!!!!! Please Help!!!!bigpoodle2333,
If you view this topic in threaded view, it shows that Damon was responding to a specific post in the thread. To enable this setting click on the "My Settings" button in the right hand column.
As I understand it your iPhone shows up for a few seconds and then disappears in iTunes, is that correct?
Has it ever synced successfully in the past?
Is your iPhone connected directly to one of the USB ports on the motherboard of your computer? For example, not through a USB hub, with many Windows-based PCs the front USB ports are actually a USB Hub.
Do you have any pictures in the camera roll, and if so, do you have any other hardware for taking pictures connected such as a webcam, memory card reader, or all-in-one printer that includes a memory card reader?
Thank you,
Nathan C. -
Show wi-fi connected devices in iTunes 11
How do you see an iPhone connected via wi-fi in iTunes 11? In the old iTunes, once you selected to sync via wi-fi, the iPhone or ipad would always show in sidebar. Now as soon as you disconnect the cable, the device no longer shows.
riteon wrote:
I would like to show the devices' status whenever I select iTunes on my Mac.
First, the devices would have to be connected ...
Additionally, do all your devices use an Apple ID that has been authorized on your Mac? If not, go to Store > Authorize This Computer in iTunes' menu and make sure the devices' Apple IDs are authorized. -
IPhone 4 stuck on connect USB to iTunes screen
After trying to update my iPhone, my phone only shows an iTunes logo and a USB cable and my iTunes no longer recognises my iPhone 4. Need some help please. Have tried restarting my iPhone, computer and have already re-installed iTunes but nothing worked
Mine did the same thing this morning. I've held down both buttons (no red slider ever appears) until it turns off. Once I turn it back on it goes right back to that screen. I tried connecting to itunes which no longer recognizes my device so it wont restore to factory.
This is now know as the SCREEN OF DEATH!!!!!
Anyone know what's going on? I've already tried this http://support.apple.com/kb/HT1808 ... did not work.
It's like the worst case of the Monday's on Wednesday with 5 meeting lined up and NO PHONE! I die! -
Iphone remote won't connect to my iTunes library and tells me the passcode is incorrect
My iphone 5 previously worked with the Remote app to control streaming of music from my itunes library to my amp with Airplay capability. Now it can't find my itunes library and when I go to the Settings for Remote app and try to add the library, it won't accept my passcode on itunes screen where it appears. I deleted the app and re-added it to my iphone but it still won't work. My Remote app still works on my Ipad so I'm a bit perplexed as to why it won't work on my iphone 5. Any suggestions?
Hello dawgfaj,
Thank you for all the information you provided with the Remote app issue you are experiencing on your iPhone. I found an article with steps you can take when the Remote app is not connecting to iTunes:
Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
http://support.apple.com/kb/ts1741
Thank you for using Apple Support Communities.
Best,
Sheila M. -
my iphone says it is disabled, to connect it to itunes. I did and ask to allow access, and to respond to my iphone. Well nothing has happeded and im still locked out of my phone.
Put the device in DFU mode (google it) and restore.
Maybe you are looking for
-
HT1349 How do I create an iCloud account on my PC?
I have downloaded the iCloud software for PC and installed it. It asked for me to sign in and when I use my apple id I get an error that says the id is valid but not the one used to create the iClound account. I have never created the iCloud accoun
-
How to disconnect the database connection using crystal report
Post Author: cp_pramodu CA Forum: Crystal Reports Hi All, We have developed an application using .Net and Crystal Reports 10 for generating Adhoc reports from Business system (db sybase 12). We are using the below mentioned script for opening rpt fil
-
Creating files from a table and placing it in a different folders based on ID Column
I have a table <tab> <tab> <col1> <col2> .... ID1 Data.. ID1 Data.. ID1 Data.. ID2 Data.. ID2 Data.. ID3 Data.. I've another table which gives me information about the path where to place ID1 data and where to Place ID2 data ..so on <tab2> <co
-
I purchased a itouch 2g and i went to restore it and it wont boot plz help
i bought a itouch 2g model#A1288 and when i did a system restore on it because it had a bunch of junk on it it wont completely boot the apple logo turns to a skull and freezes please help i payed $200 for it off of some random guy so i cant get a ref
-
Sort order in web filter window
Hi All, Is there a way of specifying the sort order of a characteristic in the web (v3.5) filter windows? When you try to filter on specific values of a characteristic, the window returned displays the characteristics ordered by key rather than by