IPhone shrinking 300 pixel pages (webmasters)

Hi, I can't figure out what's going on my mobi pages:
Safari on my 4s iPhone displays these two .mobi-formatted pages properly
(this is the only phone I tested, but someone previously pointed out the problem, too):
kumeyaay.info/mobi/
kumeyaay.mobi/ (kumeyaay.mobi is an addon domain hosted on the kumeyaay.info site)
But it shrinks these pages:
kumeyaay.info/mobi/reservations/
kumeyaay.info/mobi/casinos/
kumeyaay.info/mobi/history/
kumeyaay.info/mobi/kumeyaay/
kumeyaay.info/mobi/mobi/
kumeyaay.info/mobi/music/
I double checked the pages in GoLive CS2 (where I created them) and they all appear to all be formatted exactly: one 300-pixel wide table, and centered.
Any clue/tip would be appreciated...

still, another spin:
<html>
  <head>
     <meta name="viewport" content="width=device-width, initial-scale=1.0, maximum-scale=1.0, minimum-scale=1.0, user-scalable=no, target-densitydpi=device-dpi">

Similar Messages

  • 300 pixels vs 72 pixels

    We built a home page in Photoshop at 300 pixels per inch. Now
    we are ready to load into Dreamweaver and it seems as though many
    pages are built at 72-80 PPI. Do we have to start over? Does it
    matter? Please tell me I dont have to start all over again? This
    has taken me hours to get to this point...
    THanks
    VED

    >>we are ready to load into Dreamweaver
    Ignoring the resolution (non)issue, when you say "load into
    Dreamweaver" do
    you mean just the images from PS or did you generate HTML in
    PS also?
    Because if you are planning to use PS generated HTML you are
    in for a big
    disappointment and endless frustration. Never use HTML from
    an image app, it
    is convoluted and will create a rigid but fragile structure
    that will break
    easily and often. Create your HTML only in DW, you'll be glad
    you did.
    Walt
    "vederenzo" <[email protected]> wrote in
    message
    news:g9t4kj$4d9$[email protected]..
    > We built a home page in Photoshop at 300 pixels per
    inch. Now we are
    > ready to
    > load into Dreamweaver and it seems as though many pages
    are built at 72-80
    > pixels. Do we have to start over? Does it matter? Please
    tell me I dont
    > have
    > to start all over again? This has taken me hours to get
    to this point...
    >
    > THanks
    > VED
    >

  • Scroll bar only scrolls the top ~300 pixels

    The latest update of Nightly is unusable. The scroll bar only changes the top 300 pixels or so of the page. Then the links do not work in the bottom portion, and you can't see the entire page.
    Troubleshooting info:
    "application": {
    "name": "Firefox",
    "version": "36.0a1",
    "userAgent": "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:36.0) Gecko/20100101 Firefox/36.0",
    "supportURL": "https://support.mozilla.org/1/firefox/36.0a1/WINNT/en-US/",
    "numTotalWindows": 2,
    "numRemoteWindows": 0
    "crashes": {
    "submitted": [],
    "pending": 0
    "modifiedPreferences": {
    "browser.cache.disk.capacity": 358400,
    "browser.cache.disk.smart_size.first_run": false,
    "browser.cache.frecency_experiment": 1,
    "browser.places.smartBookmarksVersion": 7,
    "browser.sessionstore.upgradeBackup.latestBuildID": "20141022030202",
    "browser.startup.homepage_override.mstone": "36.0a1",
    "browser.startup.homepage_override.buildID": "20141022030202",
    "dom.mozApps.used": true,
    "extensions.lastAppVersion": "36.0a1",
    "media.gmp-gmpopenh264.lastUpdate": 1414067969,
    "media.gmp-gmpopenh264.version": "1.1",
    "media.gmp-manager.lastCheck": 1414067968,
    "network.cookie.prefsMigrated": true,
    "places.history.expiration.transient_current_max_pages": 104858,
    "plugin.disable_full_page_plugin_for_types": "application/pdf",
    "privacy.sanitize.migrateFx3Prefs": true
    "lockedPreferences": {},
    "graphics": {
    "numTotalWindows": 2,
    "numAcceleratedWindows": 0,
    "windowLayerManagerType": "Basic",
    "windowLayerManagerRemote": true,
    "numAcceleratedWindowsMessage": [
    "blockedGfxCard"
    "adapterDescription": "RDPDD Chained DD",
    "adapterVendorID": "0x0000",
    "adapterDeviceID": "0x0000",
    "adapterSubsysID": "00000000",
    "adapterRAM": "Unknown",
    "adapterDrivers": "RDPDD",
    "driverVersion": "",
    "driverDate": "",
    "adapterDescription2": "",
    "adapterVendorID2": "",
    "adapterDeviceID2": "",
    "adapterSubsysID2": "",
    "adapterRAM2": "",
    "adapterDrivers2": "",
    "driverVersion2": "",
    "driverDate2": "",
    "isGPU2Active": false,
    "direct2DEnabled": false,
    "directWriteEnabled": false,
    "directWriteVersion": "6.1.7601.17563",
    "direct2DEnabledMessage": [
    "blockedGfxCard"
    "webglRendererMessage": [
    "blockedGfxCard"
    "info": {
    "AzureCanvasBackend": "skia",
    "AzureSkiaAccelerated": 0,
    "AzureFallbackCanvasBackend": "cairo",
    "AzureContentBackend": "cairo"
    "javaScript": {
    "incrementalGCEnabled": true
    "accessibility": {
    "isActive": false,
    "forceDisabled": 0
    "libraryVersions": {
    "NSPR": {
    "minVersion": "4.10.7",
    "version": "4.10.7"
    "NSS": {
    "minVersion": "3.17.2 Basic ECC",
    "version": "3.17.2 Basic ECC"
    "NSSUTIL": {
    "minVersion": "3.17.2",
    "version": "3.17.2"
    "NSSSSL": {
    "minVersion": "3.17.2 Basic ECC",
    "version": "3.17.2 Basic ECC"
    "NSSSMIME": {
    "minVersion": "3.17.2 Basic ECC",
    "version": "3.17.2 Basic ECC"
    "userJS": {
    "exists": false
    "extensions": [
    "name": "McAfee Security Scan Plus",
    "version": "1.0",
    "isActive": false,
    "id": "{e4f94d1e-2f53-401e-8885-681602c0ddd8}"
    "experiments": []
    }

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • My phone has the correct AppleID in the in settings section but asks me to login with one that isn't mine.  I deleted the ID from my itunes but it still won't let me login with mine. How do I get my iPhone on the same page?

    My iphone4 has the correct Apple ID in the information settings section and asks me to login to my ID most of the time but when I try to update my apps, it asks me to login with an ID that isn't mine.  I deleted the wrong ID from my itunes but it still won't let me login with my own ID to update apps.  How do I get my iphone on the same page?

    How did you obtain these apps? All apps are DRM protected & tied forever to the account used to originally obtain them. They cannot be transferred to another Apple ID(account), nor can they be updated using any Apple ID other than the one that was used to originally obtain them.

  • I have photoshop elements 12 and I can't get the pictures to set at 200 x 300 pixels. I get 200 x 301 or 200 x 274. I did uncheck the resampling blox but it makes no difference. What can I do to fix this?

    I have photo shop elements 12 and I am having problems obtaining 200 x 300 pixel size. I get 200 x 301 or 200 x 274 instead. What can I do to fix this? I have windows 8.1.

    Use the crop tool.
    On the tool's option bar, type 300 px & 200 px, and the desired resolution.

  • Shrinking of PDF Page

    Hi All,
    I am looking for an API through which I am able to shrink a PDF page. For example I want an A3 page to be converted to A4 without loss of any content.Please let me know is there any option available for doing the same apart from printing the page to a new file.
    Looking forward to your help.

    Hi NiceNix
    thanks for your help.
    I have done the page shrinking using the following code, but after the execution some content loss is there in the page.
    CosObj content, newContent;
    ASStm objContentStream, objNewStream;
    char* charMatrix = "q 0.5 0 0 1 0 0 cm \r";
    CosObj cosPage = PDPageGetCosObj(objPDPage);
    ASInt32 iSize = strlen(charMatrix);
    if(CosObjGetType(cosPage) == CosDict)
    content = CosDictGet(cosPage,atom);
    if(CosObjGetType(content) == CosStream)
    ASInt32 iLength = CosStreamLength(content);
    inBuffer = (char*)ASmalloc(iLength);
    outBuffer = (char*)ASmalloc(iLength + iSize);
    objContentStream = CosStreamOpenStm(content, cosOpenFiltered);
    ASInt32 bytesRead = ASStmRead(inBuffer, iLength, 1, objContentStream);
    memcpy(outBuffer, charMatrix, iSize);
    memcpy(outBuffer + iSize, inBuffer, iLength);
    objNewStream = ASMemStmRdOpen(outBuffer, iLength + iSize);
    newContent = CosNewStream(cosDoc, true, objNewStream, 0, true, CosNewNull(), CosNewNull(), -1);
    ASStmClose(objNewStream);
    CosDictPut(cosPage, atom, newContent);
    Its working well for raster page. I dont know what is wrong with the code. Please help me in this.
    One more question,
    i have tried with different file where i got "stream array" and i dont know how to use it for this operation. Could you please help me in this too.
    Thanks
    Rajeshrv

  • HT1430 wi-fi connection doesnt work, even can not put it ON. What to do? at the store guys told that they can change my iphone for 300 euros....

    wi-fi connection doesnt work, even can not put it ON. What to do? at the store guys told that they can change my iphone for 300 euros....

    Read this it might help http://support.apple.com/kb/ts1559

  • E-Recruiting 300 Start Pages

    Hello
    E-Recruiting 300 Start Pages
    In DEV & QA, we have been using the standard start pages for internal employees and the recruiter pages. The pages were displaying correctly without any problems.
    In the production system, these pages are not the same as in DEV & QA, there's also german headings.
    All transports are in PROD, and the tables looks exactly the same. I've generated the URLs, the services are activated.
    Can you please assist me. What could be missing?
    Thanx.

    Hello,
    first of all you should ensure that all languages you installed in dev & qa are also in prod if you have added languages.
    Check that you use the correct links including sap-language and BspLanguage. This also includes the links really routed through the whole web infrastructure. A web application firewall or other components can mess up the parameters so they do not really
    get to the WebAS and the users are logged in in the wrong language.
    Of course run the report or the function from sotr_edit which adapts the contexts of all OTRs.
    If this asll does not help check compare the systems withb SCU0.
    Best regards
    Roman

  • Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone.

    My Iphone was changed because of broken down thanks to its warranty. I am from Turkey and I paid one time for my old Iphone to save. Can you give me a paper or document related to this phone was changed since it was broken down? I need IMEI numbers of two Iphones on the same page. Because I don't wanna save this Iphone again in my country. I paid one time for my old Iphone. If you give me a document, I don't need to save my Iphone5 and also I don't need to pay again to save in my country.

    this forum is made up of users like you, not apple employees.  We can not help you with that kind of request.

  • CPU and paintbrush /blur brush @ 300 pixels wide

    Hey guys I've been a Photoshop user for close to 15 years. I have ver. CS2 and a AMD Athlon 64 X2 Dual core CPU 4200+ 2.21GHz CPU /1GB RAM (6 years old along with the version CS2 running WinXP SP3) I plan on upgrading this year my hardware, OS (to WIn 7 64-bit) and the Adobe Production Premium suite to CS6 (After upgrading to CS5.5 since I am ineligible for the upgrade from CS2. )
    One of the things that has always bothered me in Photoshop CS2 was when I set a paintbrush or a blur brush to 300 pixels wide and I'm working even on a small 4x6" 300dpi canvas If I make a brushstroke it takes seconds to make a rendered stroke. I plan on doing digital paintings with a Wacom tablet 8x10, 11x14, 16x20" in size with Photoshop CS6.
    I read that as of 2008 CS 3 Photoshop will use the GPU for rendering/processing some effects. Is this true for PaintBrush and blur tools?
    Granted we are talking about a 6 year old mid-level CPU and now new technology but I would like to know along with using 8 GB RAM
    Will this 300 pixel-wide brush lag totally change with a Ivy Bridge Intel Core i5-3570K Ivy Bridge 3.4GHz    Quad-Core?
    Is there a significant difference when using Photoshop with a Ivy Bridge Intel Core i7-3770K Ivy Bridge 3.5GHz    Quad-Core since both chips are multicore which Photoshop does use?
    I'm trying to choose my new build and figure out what CPU to get since they are $110. difference. Is is night and day with most of the CPU intensive stuff on Photoshop?

    Here is a link to what was added in CS6.  http://forums.adobe.com/thread/979969
    I have read in past posts that PS is more a memory intensive program than a CPU intensive program, so it appears more RAM is better than a faster processor.  It is not uncommon to have 24 g of RAM now.
    The lag with big brushes, liquify, blur, etc. is highly dependant on the video card and specifically the driver.
    So it seems that 8 gigs of RAM and 1 gig of VRAM is necessary for average performance with some tools.
    PS does use multicore processing but still uses just one video card.

  • Outlining, Borders and Shrinking to 1 Page

    I used to use Excel daily at work and finally switched to Numbers. I used to use the border/outline feature alot. I don't seem to be able to find the equilvant in Numbers. Also there is no shrink to one page feature. From reading this forum I have to re size and delete columns until it fits on one page? Thanks for your help.

    Kaz,
    The Numbers User Guide PDF is the best place to look for the basics, stuff you are pretty sure should be possible.
    Controls for Borders are in the Table Inspector, and when appropriate, on the Format Bar. You select the range of cells you want to change the borders on, pick which borders you want to change within the selection and then pick line type, width or color. As you select the border lines, you will see them highlighted - don't mistake this for the change.
    Fitting content to a page is done in two ways. First, eliminate any rows or columns that don't have content. If you don't, you'll get extra pages. Second, if you've gotten rid of any unneeded parts and still can't fit what you want on a page, you can shrink everything with the Content Scale Slider in the lower left part of the window. You must select Print View mode to activate the slider.
    Hope this gets you on your way.
    Jerry

  • IPhone screen went pixelated..

    So I was using the Digg app on my iPhone and exited the app while it was loading a page, I do this all the time and never ran into an issue, and suddenly the screen becomes all pixelated like the whole screen looked like it was put through a filter and the phone shuts down. So I turn it back on and its at 29% battery, I wait a bit and its back to where it was (55%). Whats going on? What should I do?

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • Shrink to  fit page doesn't work

    Hi. I have a complex program which is doing the following.
    Java program calling c++ executable by using "Process" object which is using Win API interface to start new process eg: "c:\PathTo Adobe executable /p /h c:\myPdf.pdf". The document's margins are very close to document's edges, so if I want to print this document normally I use "shrink to page". But the documet printed without shrinking!!!
    When I an opening the same document just inside Acrobat and send it to print, it is printed normally, when I am executing only c++ executable it is printed shinked.
    I tryed it in Acrobat 7,8,9 with the same result.
    Moreover on other PC it is printed shrinked, when executing the whole process I described above!!!
    What can be a problem. It seems to be that Adobe loosing "shrink to fit" settings

    Try disabling the "resume from crash" option.
    # Type '''about:config''' into the locaiton bar and press enter
    # Accept the warning message that appears, this will take you to a list of preferences
    # In the filter box type '''crash'''
    # Double-click on the preference browser.sessionstore.resume_from_crash to change its value to false
    If you are always getting this message, it indicates Firefox may be crashing when you close it, this may be caused by a problematic add-on, for help twith that see [[Troubleshooting extensions and themes]] and [[Firefox crashes]].

  • Videos play on iPhone, but not MacBook (page generated by 'Save for Web')

    I have QT 10, and I wanted to post a video I made on a personal webpage. I used the 'save for web' option from within QT 10, and it generated the usual ugly HTML page, the MOV file, and the source files that I specified. I edited the HTML to make it look a bit prettier and added the extra content I wanted to have, and uploaded it to my webserver (page is located at http://www.mripatientsafety.com/NERHRM/Resources/NERHRM_TGilk_on_MRI_Safety.html).
    The video played when I loaded it on my iPhone, but wouldn't load / display on my MacBook in either Firefox or Safari. I thought it might be something wrong with the MOV wrapper file, so I changed the HTML to skip the MOV and point directly to the MV4 file, but the exact same symptoms persist.
    I don't do this often, but I have used the 'Save for Web' feature maybe a half-dozen times before, and I've never had this problem. At this point, I'm thinking that the problem might be:
    I'm a dummy and goofed up a section of code and didn't realize it.
    There's been updates to Firefox and Safari since the last time I tried this (perhaps a year ago) and they now are unfriendly with the way that QT 10 prepares the HTML.
    I would greatly appreciate any help that anyone can offer to help make sure that the video displays properly for the greatest number of viewers.
    Thank you in advance.

    Further update:
    I am trying to import the files to my Macbook Pro (10.10.3) via Photos, and it will not allow me to import them.
    I receiving the below error message:
    The following files could not be imported (they may be an unrecognized file type or the files may to contain valid data).
    Reason: The operation couldn't be completed. (com.apple.ImageCaptureCore error -9912.)
    The file types are .mp4 and .mov
    Any ideas or recommendations?
    I have done a Hard reset, soft reset, and tried resetting network settings.
    I have done a Manual Backup to computer and did a backup to iCloud- but I have not restored the iPhone yet, as I am not sure if the files are being backed up or not?
    I also tried using a third party transfer app (AnyTrans) to transfer the files to my computer hard drive, but it would not allow the transfer and kept skipping the videos which won't play back (even though it recognizes them - but won't play them back).

  • IPhone not loading a page

    I was sent an SMS message that pointed to a web site that contained a picture that someone had sent from their iPhone. However, when I tried to open the page with the picture ( at www.viewmymessage.com/1 ) I get an error message "Failure encountered during view message". I can view this page using Safari or Firefox on my mac.
    Any suggestions about what may be going on here?
    Thanks, John Shanks

    For some lovely reason AT&T teases us with the thought that we can view the MMS sent to use from our iPhone when they send us that sms. Sadly though it's not possible to go to the website from the iPhone, you have to go to it from your computer. It's great isn't it?

Maybe you are looking for