IPhone sleeps immediately after unlock button press.
I have an iPhone 4 and iPad 1 that both have this issue. Every once in a while, maybe 1-3 times a week, when I hit the unlock button, it will flash the screen on for a fraction of a second and go back to sleep. I then have to hit the button again before I can slide to unlock and use it. Has anyone else had this issue? Any tips on how I can get it working right again? It is quite rare that it happens to me but still a little annoying that both of my iDevices are doing this. Thanks!
Hey aaaTiger...
Like DaVBMan said... this is by design... If the phone didnt' allow you to answer without unlocking then you would miss the call.. Since the phone didn't technically unlock it goes back to a locked status when completed... As designed by apple...
When you make the phone call you've initiated the phone by saying you want to do the call, and therefore allows you to do whatever else you want while it is unlocked...
The point that you are describing is as designed and documented in the iPhone users manual on the website... To the best of my knowledge you can not change this since the phone is technically still locked... If you want to use it after you need to manually go through the process of unlocking it... Which is again the same process that you would need to do if you manually pressed the black button on the top of the phone which locks the device up...
Hope that helps clarify the situation..
Similar Messages
-
My facebook icon dissapeared from my iphone 4s immediately after I updated my face book app. I have tryed everything to restore it but nothing worked and I couldn't even download it again because in the settings it says thats its installed and when try to open it it doesn't respond. Has any one experiebced the same thing or does anyone know any idea how to fix this?
Thanks.try
Restart iPhone: Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart. -
Mac Pro switches itself off immediately after power button is pressed on
Hi there,
I would like to share with you an ongoing problem of my Mac Pro (about on and off 11 month I think). Since its HD changed at the beginning of this year I've been having the problem of "switching itself off immediately after the power button is pressed on." I took it to Milton Keynes Apple Shop and apparently they couldn't replicate the problem I received it after they reset it's PRAM. Meanwhile I read the related posts and discussions about the problem and my assumption was as suggested in the scenarios of similar cause – Power Supply unit. I had a technical chat with ex-Solutions staff from Brighton, he also said it might have been caused by it.
I really don't know what to do because, sometimes attempting 10 or over times of pressing the button I hear the chime and literally 10 or 20 seconds later it switches itself off. And it happened this Sunday morning again, 8 times I've encountered the failure. And the most confusing thing is sometimes I leave it about an hour or two and then it just works and runs fine as it has never have happened.
By the way I left my computer on for a very long time I suspect maybe more than a month it was on sleep most of time when i am not using it. But yesterday I made the mistake of logging off and shutting it down. Now I can't turn my computer on. Highly frustrating and amazingly bizarre technical challenge.
Mind you I am fairly capable of carrying DIY operations on it. Previously I baked my graphics card as suggested in the forum – it works fine at the moment I am waiting until it completely brakes. But this power problem really really puzzles me.
Any opinions, how to solve this cause is highly appreciated.
Many thanks!
Specs:
Mac Pro 8 core
Xeon 5400 2nd Generation Early 2008
10 GB RAM
1 TB HDThe SMC especially on the very first 2-3 months of Early 2008.
Use to suffer from a "restart on wake from sleep" issue.
Some one told me that is not what "inrush current issue" is but that is what I (and couple others) called it.
Best to always have a workstation on 1500VA UPS.
Not share the outlet or cirucit even with anything major.
Yes it could I guess, poor phrase, but put more stress on PSU over time as a result also.
Methods to reset SMC have varied and changed over time. Thanks to web not all the revisions and older versions are kept online though to compare to.
Stories of people going on vacation etc for two weeks to come back to a "dead" Mac Pro started showing up in 2007.
If it had an actual SMC button, use that to reset.
If not, leaving it totally disconnected, and all external cables and such over-night, not for the mere 5-10 minutes.
Unplug but then press and hold power button for 8-10 seconds. And only once. And not to be done repeatedly. That was SMC Reset #3.
I know the 2007 8-core 3GHz had a different PSU than the smaller models.
2008 high end was 8-core 3.2GHz 5400 (stock was 2.8GHz 4 or 8-core)
FBDIMMs draw between 10W up to 15W each, so possible to have 8 DIMMs drawing 120W when maxed out. And heat. I always recommend Mac Pro use fan control to boost the fans a small 400 rpm to expel heat better and keep FBDIMM temps down. Heat, and temperature fluxuations stress and weaken components.
Other than AHT and the tools that a Apple Certified center should have, not much other than to swap out parts, monitor - iStatPro or Hardware Monitor -
And because of all this, I would setup a test system so you have a freshly formatted and installed OS and take it from there, with a better chance.
ATI 2600XT still? or upgraded? -
I've tried hard to find someone else with these symptoms, and nobody seems to have a complete answer.
After upgrading my 2008 MacBook Pro to OSX Lion, these problems began.
Whenever I leave the lid closed for too long - not entirely sure how long, but the longer I leave it the more likely this is to happen - it refuses to wake when I open the lid. The power light will brighten, as if it were about to wake, and sometimes the screen will flash, but then it will all go black, power light and all.
At this point I press the power button, and the power light briefly flashes, and then the macbook seems to 'really' turn itself off.
Then I press the power button again, and it begins to boot. I enter my FileVault 2 password, and the apple logo and spinner appear, but as soon as the graphics driver kicks in (or whatever it is - the point when the shades of grey suddenly change and the brightness automatically adjusts) suddenly the mac goes straight to sleep immediately, and we're back to the same symptom as before.
It will do this repeatedly through a 2nd, 3rd, etc power cycle.
Resetting the SMC doesn't seem to help.
I have managed to get the macbook to boot normally by clearing the NV Ram, and also by booting into single user mode and immediately shutting down and rebooting. But this does not solve the problem, it merely lets me boot one more time.
Any thoughts appreciated, it's driving me mad, not to mention losing me work.Anyone? Is there really nobody else who's seen similar symptoms?
I'm still experiencing this. I've discovered that booting into Recovery Mode usually works first time, but this doesn't help with my wake-up-from-sleep problem. -
[SOLVED] System goes to sleep immediately after boot
I just upgraded this afternoon and now my system goes to sleep (suspend-to-RAM) as soon as it has finished booting. When I then press the power button, it wakes up, briefly shows the login screen and then goes back to sleep afterwards. This happens in runlevel 5. When I boot into runlevel 1, the system stays up all the time. I guess it has something to do with systemd and I already tried to find out how to debug this, but was unsuccessful in finding out what goes wrong.
I am using i686 Arch with systemd 210-3 and Kernel 3.13.6-1.
Pacman Log:
[2014-02-21 01:06] [PACMAN] Running 'pacman --color auto -Sy'
[2014-02-21 01:06] [PACMAN] synchronizing package lists
[2014-02-21 01:06] [PACMAN] Running 'pacman --color auto -S -u'
[2014-02-21 01:06] [PACMAN] starting full system upgrade
[2014-02-21 01:08] [PACMAN] Running 'pacman --color auto -S eapeak extra/alsa-lib extra/alsa-utils'
[2014-02-21 01:08] [PACMAN] Running 'pacman --color auto -S extra/alsa-lib extra/alsa-utils community/espeak'
[2014-02-21 01:08] [PACMAN] installed alsa-lib (1.0.27.2-1)
[2014-02-21 01:08] [PACMAN] installed dialog (1:1.2_20140112-1)
[2014-02-21 01:08] [PACMAN] installed libogg (1.3.1-2)
[2014-02-21 01:08] [PACMAN] installed flac (1.3.0-1)
[2014-02-21 01:08] [PACMAN] installed libvorbis (1.3.4-1)
[2014-02-21 01:08] [PACMAN] installed libsndfile (1.0.25-3)
[2014-02-21 01:08] [PACMAN] installed libsamplerate (0.1.8-3)
[2014-02-21 01:08] [PACMAN] installed alsa-utils (1.0.27.2-1)
[2014-02-21 01:08] [PACMAN] installed jack (0.124.1-1)
[2014-02-21 01:08] [PACMAN] installed portaudio (19_20140130-1)
[2014-02-21 01:08] [PACMAN] installed libasyncns (0.8-5)
[2014-02-21 01:08] [PACMAN] installed xcb-proto (1.10-1)
[2014-02-21 01:08] [PACMAN] installed xproto (7.0.25-1)
[2014-02-21 01:08] [PACMAN] installed libxdmcp (1.1.1-1)
[2014-02-21 01:08] [PACMAN] installed libxau (1.0.8-2)
[2014-02-21 01:08] [PACMAN] installed libxcb (1.10-1)
[2014-02-21 01:08] [PACMAN] installed kbproto (1.0.6-1)
[2014-02-21 01:08] [PACMAN] installed libx11 (1.6.2-1)
[2014-02-21 01:08] [PACMAN] installed xextproto (7.3.0-1)
[2014-02-21 01:08] [PACMAN] installed libxext (1.3.2-1)
[2014-02-21 01:08] [PACMAN] installed inputproto (2.3-1)
[2014-02-21 01:08] [PACMAN] installed libxi (1.7.2-1)
[2014-02-21 01:08] [PACMAN] installed recordproto (1.14.2-1)
[2014-02-21 01:08] [PACMAN] installed fixesproto (5.0-2)
[2014-02-21 01:08] [PACMAN] installed libxfixes (5.0.1-1)
[2014-02-21 01:08] [PACMAN] installed libxtst (1.2.2-1)
[2014-02-21 01:08] [PACMAN] installed libice (1.0.8-2)
[2014-02-21 01:08] [PACMAN] installed libsm (1.2.2-2)
[2014-02-21 01:08] [PACMAN] installed json-c (0.11-1)
[2014-02-21 01:08] [PACMAN] installed libpulse (4.0-6)
[2014-02-21 01:08] [PACMAN] installed espeak (1.47.11-1)
[2014-02-21 01:10] [PACMAN] Running 'pacman --color auto -S extra/beep'
[2014-02-21 01:10] [PACMAN] installed beep (1.3-2)
[2014-02-21 01:10] [PACMAN] Running 'pacman --color auto -S extra/beep'
[2014-02-21 01:20] [PACMAN] Running 'pacman --color auto -Sy'
[2014-02-21 01:20] [PACMAN] synchronizing package lists
[2014-02-21 01:20] [PACMAN] Running 'pacman --color auto -S -u'
[2014-02-21 01:20] [PACMAN] starting full system upgrade
[2014-02-21 01:21] [PACMAN] removed libusbx (1.0.17-1)
[2014-02-21 01:21] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
[2014-02-21 01:21] [ALPM-SCRIPTLET] gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
[2014-02-21 01:21] [ALPM-SCRIPTLET] gpg: depth: 0 valid: 1 signed: 7 trust: 0-, 0q, 0n, 0m, 0f, 1u
[2014-02-21 01:21] [ALPM-SCRIPTLET] gpg: depth: 1 valid: 7 signed: 60 trust: 2-, 0q, 0n, 5m, 0f, 0u
[2014-02-21 01:21] [ALPM-SCRIPTLET] gpg: depth: 2 valid: 60 signed: 4 trust: 60-, 0q, 0n, 0m, 0f, 0u
[2014-02-21 01:21] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2015-01-21
[2014-02-21 01:21] [ALPM-SCRIPTLET] ==> Locally signing trusted keys in keyring...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Locally signing key 44D4A033AC140143927397D47EFD567D4C7EA887...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Locally signing key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
[2014-02-21 01:21] [ALPM-SCRIPTLET] ==> Importing owner trust values...
[2014-02-21 01:21] [ALPM-SCRIPTLET] ==> Disabling revoked keys in keyring...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 7FA647CD89891DEDC060287BB9113D1ED21E1A55...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 63F395DE2D6398BBE458F281F2DBB4931985A992...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 8F76BEEA0289F9E1D3E229C05F946DED983D4366...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 66BD74A036D522F51DD70A3C7F2A16726521E06D...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key 81D7F8241DB38BC759C80FCE3A726C6170E80477...
[2014-02-21 01:21] [ALPM-SCRIPTLET] -> Disabling key E7210A59715F6940CF9A4E36A001876699AD6E84...
[2014-02-21 01:21] [ALPM-SCRIPTLET] ==> Updating trust database...
[2014-02-21 01:21] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2015-01-21
[2014-02-21 01:21] [PACMAN] upgraded archlinux-keyring (20140124-1 -> 20140220-1)
[2014-02-21 01:21] [PACMAN] upgraded linux-api-headers (3.12.4-1 -> 3.13.2-1)
[2014-02-21 01:21] [ALPM] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2014-02-21 01:21] [ALPM-SCRIPTLET] Generating locales...
[2014-02-21 01:21] [ALPM-SCRIPTLET] de_DE.UTF-8... done
[2014-02-21 01:21] [ALPM-SCRIPTLET] de_DE.ISO-8859-1... done
[2014-02-21 01:22] [ALPM-SCRIPTLET] de_DE.ISO-8859-15@euro... done
[2014-02-21 01:22] [ALPM-SCRIPTLET] en_US.UTF-8... done
[2014-02-21 01:22] [ALPM-SCRIPTLET] en_US.ISO-8859-1... done
[2014-02-21 01:22] [ALPM-SCRIPTLET] Generation complete.
[2014-02-21 01:22] [PACMAN] upgraded glibc (2.18-12 -> 2.19-2)
[2014-02-21 01:22] [PACMAN] upgraded binutils (2.24-1 -> 2.24-2)
[2014-02-21 01:22] [PACMAN] upgraded file (5.16-1 -> 5.17-1)
[2014-02-21 01:22] [PACMAN] upgraded flex (2.5.37-1 -> 2.5.38-1)
[2014-02-21 01:22] [PACMAN] upgraded gcc-libs (4.8.2-7 -> 4.8.2-8)
[2014-02-21 01:22] [PACMAN] upgraded gcc (4.8.2-7 -> 4.8.2-8)
[2014-02-21 01:22] [PACMAN] upgraded perl-error (0.17021-1 -> 0.17022-1)
[2014-02-21 01:22] [PACMAN] upgraded git (1.8.5.4-1 -> 1.9.0-1)
[2014-02-21 01:22] [PACMAN] upgraded p11-kit (0.20.1-1 -> 0.20.2-1)
[2014-02-21 01:22] [PACMAN] upgraded gnutls (3.2.10-1 -> 3.2.11-1)
[2014-02-21 01:22] [PACMAN] upgraded libpng (1.6.8-1 -> 1.6.9-1)
[2014-02-21 01:22] [PACMAN] upgraded libsasl (2.1.26-6 -> 2.1.26-7)
[2014-02-21 01:22] [PACMAN] upgraded pam (1.1.8-2 -> 1.1.8-3)
[2014-02-21 01:22] [PACMAN] upgraded systemd (208-10 -> 208-11)
[2014-02-21 01:22] [PACMAN] installed libusb (1.0.18-1)
[2014-02-21 01:22] [PACMAN] upgraded man-pages (3.57-1 -> 3.58-1)
[2014-02-21 01:22] [PACMAN] upgraded sqlite (3.8.3-1 -> 3.8.3.1-1)
[2014-02-21 01:22] [PACMAN] upgraded python2 (2.7.6-1 -> 2.7.6-2)
[2014-02-21 01:22] [PACMAN] upgraded s-nail (14.5.2-3 -> 14.5.2-4)
[2014-02-21 01:22] [PACMAN] upgraded sudo (1.8.9.p4-1 -> 1.8.9.p5-1)
[2014-02-21 01:22] [PACMAN] upgraded systemd-sysvcompat (208-10 -> 208-11)
[2014-02-21 18:52] [PACMAN] Running 'pacman --color auto -S extra/alsa-tools extra/alsa-utils extra/alsa-oss extra/alsa-lib extra/alsa-firmware extra/alsa-plugins'
[2014-02-21 18:52] [PACMAN] reinstalled alsa-lib (1.0.27.2-1)
[2014-02-21 18:52] [PACMAN] installed alsa-tools (1.0.27-5)
[2014-02-21 18:52] [PACMAN] reinstalled alsa-utils (1.0.27.2-1)
[2014-02-21 18:52] [PACMAN] installed alsa-oss (1.0.25-2)
[2014-02-21 18:52] [PACMAN] installed alsa-firmware (1.0.27-2)
[2014-02-21 18:52] [PACMAN] installed alsa-plugins (1.0.27-2)
[2014-02-21 19:02] [PACMAN] Running 'pacman --color auto -S extra/festival'
[2014-02-21 19:02] [PACMAN] installed festival (2.1-4)
[2014-02-21 19:03] [PACMAN] Running 'pacman --color auto -S community/festival-english'
[2014-02-21 19:03] [PACMAN] installed festival-english (2.0.95-2)
[2014-02-21 19:03] [PACMAN] Running 'pacman --color auto -S extra/alsa-oss'
[2014-02-21 19:03] [PACMAN] reinstalled alsa-oss (1.0.25-2)
[2014-02-27 15:30] [PACMAN] Running 'pacman --color auto -Sy'
[2014-02-27 15:30] [PACMAN] synchronizing package lists
[2014-02-27 15:30] [PACMAN] Running 'pacman --color auto -S -u'
[2014-02-27 15:30] [PACMAN] starting full system upgrade
[2014-02-27 15:31] [PACMAN] upgraded dialog (1:1.2_20140112-1 -> 1:1.2_20140219-1)
[2014-02-27 15:31] [PACMAN] upgraded grep (2.16-1 -> 2.18-1)
[2014-02-27 15:31] [PACMAN] upgraded libwbclient (4.1.4-1 -> 4.1.5-1)
[2014-02-27 15:31] [PACMAN] upgraded linux-firmware (20140123.418320b-1 -> 20140217.343e460-1)
[2014-02-27 15:32] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-02-27 15:32] [ALPM-SCRIPTLET] depmod: ERROR: Module 'hci_vhci' has devname (vhci) but lacks major and minor information. Ignoring.
[2014-02-27 15:32] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Starting build: 3.13.5-1-ARCH
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Creating xz initcpio image: /boot/initramfs-linux.img
[2014-02-27 15:32] [ALPM-SCRIPTLET] xz: Filter chain: --lzma2=dict=1MiB,lc=3,lp=0,pb=2,mode=fast,nice=128,mf=hc4,depth=8
[2014-02-27 15:32] [ALPM-SCRIPTLET] xz: 9 MiB of memory is required. The limiter is disabled.
[2014-02-27 15:32] [ALPM-SCRIPTLET] xz: Decompression will need 2 MiB of memory.
[2014-02-27 15:32] [ALPM-SCRIPTLET] (stdin): 4,226.6 KiB / 11.6 MiB = 0.354, 1.1 MiB/s, 0:10
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Starting build: 3.13.5-1-ARCH
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-02-27 15:32] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-02-27 15:32] [ALPM-SCRIPTLET] ==> Creating xz initcpio image: /boot/initramfs-linux-fallback.img
[2014-02-27 15:32] [ALPM-SCRIPTLET] xz: Filter chain: --lzma2=dict=1MiB,lc=3,lp=0,pb=2,mode=fast,nice=128,mf=hc4,depth=8
[2014-02-27 15:32] [ALPM-SCRIPTLET] xz: 9 MiB of memory is required. The limiter is disabled.
[2014-02-27 15:32] [ALPM-SCRIPTLET] xz: Decompression will need 2 MiB of memory.
[2014-02-27 15:33] [ALPM-SCRIPTLET] (stdin): 13.8 MiB / 41.2 MiB = 0.334, 1.4 MiB/s, 0:28
[2014-02-27 15:33] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-02-27 15:33] [ALPM-SCRIPTLET] >>> WARNING: AT keyboard support is no longer built into the kernel.
[2014-02-27 15:33] [ALPM-SCRIPTLET] >>> In order to use your keyboard during early init, you MUST
[2014-02-27 15:33] [ALPM-SCRIPTLET] >>> include the 'keyboard' hook in your mkinitcpio.conf.
[2014-02-27 15:33] [PACMAN] upgraded linux (3.12.9-1 -> 3.13.5-1)
[2014-02-27 15:33] [PACMAN] upgraded linux-headers (3.12.9-1 -> 3.13.5-1)
[2014-02-27 15:33] [PACMAN] upgraded man-pages (3.58-1 -> 3.60-1)
[2014-02-27 15:33] [PACMAN] upgraded python2 (2.7.6-2 -> 2.7.6-3)
[2014-02-27 15:33] [PACMAN] upgraded s-nail (14.5.2-4 -> 14.6.1-1)
[2014-02-27 15:33] [PACMAN] upgraded smbclient (4.1.4-1 -> 4.1.5-1)
[2014-02-27 15:33] [PACMAN] upgraded samba (4.1.4-1 -> 4.1.5-1)
[2014-02-27 15:33] [PACMAN] Running 'pacman --color auto -U --noconfirm /tmp/yaourt-tmp-akurei/PKGDEST.img/btsync-1.2.82-3-i686.pkg.tar.xz'
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] WebGUI can be accessed at http://localhost:8888
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] To start btsync, execute:
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] systemctl start btsync@user
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] where 'user' is your username.
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] To autostart btsync on systm start, excute
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] systemctl enable btsync@user
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [ALPM-SCRIPTLET] where 'user' is your username.
[2014-02-27 15:33] [ALPM-SCRIPTLET]
[2014-02-27 15:33] [PACMAN] upgraded btsync (1.2.82-1 -> 1.2.82-3)
[2014-03-01 19:34] [PACMAN] Running 'pacman --color auto -Sy'
[2014-03-01 19:34] [PACMAN] synchronizing package lists
[2014-03-01 19:34] [PACMAN] Running 'pacman --color auto -S -u'
[2014-03-01 19:34] [PACMAN] starting full system upgrade
[2014-03-01 19:35] [PACMAN] upgraded glibc (2.19-2 -> 2.19-3)
[2014-03-01 19:35] [PACMAN] upgraded device-mapper (2.02.105-1 -> 2.02.105-2)
[2014-03-01 19:35] [PACMAN] upgraded cryptsetup (1.6.3-2 -> 1.6.4-1)
[2014-03-01 19:35] [PACMAN] upgraded libtirpc (0.2.3-2 -> 0.2.4-1)
[2014-03-01 19:35] [PACMAN] upgraded readline (6.2.004-2 -> 6.3-1)
[2014-03-01 19:35] [PACMAN] upgraded lvm2 (2.02.105-1 -> 2.02.105-2)
[2014-03-04 23:15] [PACMAN] Running 'pacman --color auto -S --asdeps --needed extra/aalib extra/libmikmod community/allegro'
[2014-03-05 18:00] [PACMAN] Running 'pacman --color auto -Sy'
[2014-03-05 18:00] [PACMAN] synchronizing package lists
[2014-03-05 18:00] [PACMAN] Running 'pacman --color auto -S -u'
[2014-03-05 18:00] [PACMAN] starting full system upgrade
[2014-03-05 18:00] [PACMAN] upgraded gnutls (3.2.11-1 -> 3.2.12-1)
[2014-03-05 18:00] [PACMAN] installed libseccomp (2.1.1-1)
[2014-03-05 18:00] [ALPM-SCRIPTLET] :: systemd has not been reexecuted. It is recommended that you
[2014-03-05 18:00] [ALPM-SCRIPTLET] reboot at your earliest convenience.
[2014-03-05 18:00] [ALPM-SCRIPTLET] :: Network device naming is now controlled by udev's net_setup_link
[2014-03-05 18:00] [ALPM-SCRIPTLET] builtin. Refer to the NETWORK LINK CONFIGURATION section of the
[2014-03-05 18:00] [ALPM-SCRIPTLET] udev manpage for a full description.
[2014-03-05 18:00] [ALPM-SCRIPTLET] :: No changes have been made to your network naming configuration.
[2014-03-05 18:00] [ALPM-SCRIPTLET] Interfaces should continue to maintain the same names.
[2014-03-05 18:00] [PACMAN] upgraded systemd (208-11 -> 210-2)
[2014-03-05 18:00] [PACMAN] upgraded libpulse (4.0-6 -> 5.0-1)
[2014-03-05 18:00] [PACMAN] upgraded man-pages (3.60-1 -> 3.61-1)
[2014-03-05 18:00] [PACMAN] upgraded systemd-sysvcompat (208-11 -> 210-2)
[2014-03-10 15:50] [PACMAN] Running 'pacman --color auto -Sy'
[2014-03-10 15:50] [PACMAN] synchronizing package lists
[2014-03-10 15:51] [PACMAN] Running 'pacman --color auto -S -u'
[2014-03-10 15:51] [PACMAN] starting full system upgrade
[2014-03-10 15:52] [PACMAN] upgraded file (5.17-1 -> 5.17-2)
[2014-03-10 15:52] [PACMAN] upgraded gnutls (3.2.12-1 -> 3.2.12.1-1)
[2014-03-10 15:52] [PACMAN] upgraded libarchive (3.1.2-4 -> 3.1.2-6)
[2014-03-10 15:52] [PACMAN] upgraded libpng (1.6.9-1 -> 1.6.10-1)
[2014-03-10 15:52] [PACMAN] upgraded libcups (1.7.1-3 -> 1.7.1-4)
[2014-03-10 15:52] [PACMAN] upgraded libnl (3.2.23-1 -> 3.2.24-1)
[2014-03-10 15:52] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-03-10 15:52] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Starting build: 3.13.6-1-ARCH
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Creating xz initcpio image: /boot/initramfs-linux.img
[2014-03-10 15:52] [ALPM-SCRIPTLET] xz: Filter chain: --lzma2=dict=1MiB,lc=3,lp=0,pb=2,mode=fast,nice=128,mf=hc4,depth=8
[2014-03-10 15:52] [ALPM-SCRIPTLET] xz: 9 MiB of memory is required. The limiter is disabled.
[2014-03-10 15:52] [ALPM-SCRIPTLET] xz: Decompression will need 2 MiB of memory.
[2014-03-10 15:52] [ALPM-SCRIPTLET] (stdin): 4,276.4 KiB / 11.7 MiB = 0.356, 1.4 MiB/s, 0:08
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> Starting build: 3.13.6-1-ARCH
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-03-10 15:52] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-10 15:52] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-10 15:53] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-10 15:53] [ALPM-SCRIPTLET] ==> Creating xz initcpio image: /boot/initramfs-linux-fallback.img
[2014-03-10 15:53] [ALPM-SCRIPTLET] xz: Filter chain: --lzma2=dict=1MiB,lc=3,lp=0,pb=2,mode=fast,nice=128,mf=hc4,depth=8
[2014-03-10 15:53] [ALPM-SCRIPTLET] xz: 9 MiB of memory is required. The limiter is disabled.
[2014-03-10 15:53] [ALPM-SCRIPTLET] xz: Decompression will need 2 MiB of memory.
[2014-03-10 15:53] [ALPM-SCRIPTLET] (stdin): 13.8 MiB / 41.2 MiB = 0.335, 1.1 MiB/s, 0:36
[2014-03-10 15:53] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-10 15:53] [PACMAN] upgraded linux (3.13.5-1 -> 3.13.6-1)
[2014-03-10 15:53] [PACMAN] upgraded linux-headers (3.13.5-1 -> 3.13.6-1)
[2014-03-10 15:53] [PACMAN] upgraded pkgfile (12-1 -> 13-1)
[2014-03-10 15:53] [PACMAN] upgraded ruby (2.1.0-2 -> 2.1.1-1)
[2014-03-10 15:53] [PACMAN] upgraded s-nail (14.6.1-1 -> 14.6.2-1)
[2014-03-10 15:53] [PACMAN] upgraded systemd (210-2 -> 210-3)
[2014-03-10 15:53] [PACMAN] upgraded systemd-sysvcompat (210-2 -> 210-3)
[2014-03-10 18:32] [PACMAN] Running 'pacman -Syyu'
[2014-03-10 18:32] [PACMAN] synchronizing package lists
[2014-03-10 18:32] [PACMAN] starting full system upgrade
[2014-03-10 18:32] [PACMAN] upgraded dhcpcd (6.2.1-1 -> 6.3.1-1)
[2014-03-10 18:32] [PACMAN] upgraded espeak (1.47.11-1 -> 1.48.04-1)
[2014-03-10 18:32] [PACMAN] upgraded tzdata (2013i-1 -> 2014a-1)
The last log via "journalctl -x -b -1":
-- Logs begin at Mo 2013-02-25 20:48:46 CET, end at Mo 2014-03-10 18:44:57 CET. --
Mär 10 18:41:59 matt systemd-journal[178]: Runtime journal is using 6.2M (max allowed 49.8M, trying to leave 74.8M free of 492.4M available → current limit 49.8M).
Mär 10 18:41:59 matt systemd-journal[178]: Runtime journal is using 6.2M (max allowed 49.8M, trying to leave 74.8M free of 492.4M available → current limit 49.8M).
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys cpuset
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys cpu
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys cpuacct
Mär 10 18:41:59 matt kernel: Linux version 3.13.6-1-ARCH (nobody@var-lib-archbuild-extra-i686-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Mar 7 22:30:23 CET 2014
Mär 10 18:41:59 matt kernel: Disabled fast string operations
Mär 10 18:41:59 matt kernel: e820: BIOS-provided physical RAM map:
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x0000000000100000-0x000000003f7bffff] usable
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x000000003f7c0000-0x000000003f7cdfff] ACPI data
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x000000003f7ce000-0x000000003f7fffff] ACPI NVS
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Mär 10 18:41:59 matt kernel: BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
Mär 10 18:41:59 matt kernel: Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
Mär 10 18:41:59 matt kernel: SMBIOS 2.4 present.
Mär 10 18:41:59 matt kernel: DMI: Intel Intel/Intel, BIOS 080015 12/25/2009
Mär 10 18:41:59 matt kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Mär 10 18:41:59 matt kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Mär 10 18:41:59 matt kernel: e820: last_pfn = 0x3f7c0 max_arch_pfn = 0x100000
Mär 10 18:41:59 matt kernel: MTRR default type: uncachable
Mär 10 18:41:59 matt kernel: MTRR fixed ranges enabled:
Mär 10 18:41:59 matt kernel: 00000-9FFFF write-back
Mär 10 18:41:59 matt kernel: A0000-DFFFF uncachable
Mär 10 18:41:59 matt kernel: E0000-E3FFF write-protect
Mär 10 18:41:59 matt kernel: E4000-EFFFF write-through
Mär 10 18:41:59 matt kernel: F0000-FFFFF write-protect
Mär 10 18:41:59 matt kernel: MTRR variable ranges enabled:
Mär 10 18:41:59 matt kernel: 0 base 000000000 mask 0C0000000 write-back
Mär 10 18:41:59 matt kernel: 1 base 03F800000 mask 0FF800000 uncachable
Mär 10 18:41:59 matt kernel: 2 disabled
Mär 10 18:41:59 matt kernel: 3 disabled
Mär 10 18:41:59 matt kernel: 4 disabled
Mär 10 18:41:59 matt kernel: 5 disabled
Mär 10 18:41:59 matt kernel: 6 disabled
Mär 10 18:41:59 matt kernel: 7 disabled
Mär 10 18:41:59 matt kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Mär 10 18:41:59 matt kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
Mär 10 18:41:59 matt kernel: Scanning 1 areas for low memory corruption
Mär 10 18:41:59 matt kernel: initial memory mapped: [mem 0x00000000-0x00bfffff]
Mär 10 18:41:59 matt kernel: Base memory trampoline at [c009b000] 9b000 size 16384
Mär 10 18:41:59 matt kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Mär 10 18:41:59 matt kernel: [mem 0x00000000-0x000fffff] page 4k
Mär 10 18:41:59 matt kernel: init_memory_mapping: [mem 0x37000000-0x373fffff]
Mär 10 18:41:59 matt kernel: [mem 0x37000000-0x373fffff] page 2M
Mär 10 18:41:59 matt kernel: init_memory_mapping: [mem 0x30000000-0x36ffffff]
Mär 10 18:41:59 matt kernel: [mem 0x30000000-0x36ffffff] page 2M
Mär 10 18:41:59 matt kernel: init_memory_mapping: [mem 0x00100000-0x2fffffff]
Mär 10 18:41:59 matt kernel: [mem 0x00100000-0x003fffff] page 4k
Mär 10 18:41:59 matt kernel: [mem 0x00400000-0x2fffffff] page 2M
Mär 10 18:41:59 matt kernel: init_memory_mapping: [mem 0x37400000-0x377fdfff]
Mär 10 18:41:59 matt kernel: [mem 0x37400000-0x377fdfff] page 4k
Mär 10 18:41:59 matt kernel: BRK [0x008aa000, 0x008aafff] PGTABLE
Mär 10 18:41:59 matt kernel: RAMDISK: [mem 0x3f392000-0x3f7bffff]
Mär 10 18:41:59 matt kernel: Allocated new RAMDISK: [mem 0x373d0000-0x377fd177]
Mär 10 18:41:59 matt kernel: Move RAMDISK from [mem 0x3f392000-0x3f7bf177] to [mem 0x373d0000-0x377fd177]
Mär 10 18:41:59 matt kernel: ACPI: RSDP 000f9b20 000014 (v00 ACPIAM)
Mär 10 18:41:59 matt kernel: ACPI: RSDT 3f7c0000 000038 (v01 122509 RSDT1918 20091225 MSFT 00000097)
Mär 10 18:41:59 matt kernel: ACPI: FACP 3f7c0200 000084 (v02 122509 FACP1918 20091225 MSFT 00000097)
Mär 10 18:41:59 matt kernel: ACPI: DSDT 3f7c0430 004442 (v01 BIBTB BIBTB010 00000010 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: FACS 3f7ce000 000040
Mär 10 18:41:59 matt kernel: ACPI: APIC 3f7c0390 00005C (v01 122509 APIC1918 20091225 MSFT 00000097)
Mär 10 18:41:59 matt kernel: ACPI: MCFG 3f7c03f0 00003C (v01 122509 OEMMCFG 20091225 MSFT 00000097)
Mär 10 18:41:59 matt kernel: ACPI: OEMB 3f7ce040 000071 (v01 122509 OEMB1918 20091225 MSFT 00000097)
Mär 10 18:41:59 matt kernel: ACPI: SSDT 3f7cea50 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: Local APIC address 0xfee00000
Mär 10 18:41:59 matt kernel: 127MB HIGHMEM available.
Mär 10 18:41:59 matt kernel: 887MB LOWMEM available.
Mär 10 18:41:59 matt kernel: mapped low ram: 0 - 377fe000
Mär 10 18:41:59 matt kernel: low ram: 0 - 377fe000
Mär 10 18:41:59 matt kernel: BRK [0x008ab000, 0x008abfff] PGTABLE
Mär 10 18:41:59 matt kernel: Zone ranges:
Mär 10 18:41:59 matt kernel: DMA [mem 0x00001000-0x00ffffff]
Mär 10 18:41:59 matt kernel: Normal [mem 0x01000000-0x377fdfff]
Mär 10 18:41:59 matt kernel: HighMem [mem 0x377fe000-0x3f7bffff]
Mär 10 18:41:59 matt kernel: Movable zone start for each node
Mär 10 18:41:59 matt kernel: Early memory node ranges
Mär 10 18:41:59 matt kernel: node 0: [mem 0x00001000-0x0009efff]
Mär 10 18:41:59 matt kernel: node 0: [mem 0x00100000-0x3f7bffff]
Mär 10 18:41:59 matt kernel: On node 0 totalpages: 259934
Mär 10 18:41:59 matt kernel: free_area_init_node: node 0, pgdat c0707d00, node_mem_map f6be0020
Mär 10 18:41:59 matt kernel: DMA zone: 32 pages used for memmap
Mär 10 18:41:59 matt kernel: DMA zone: 0 pages reserved
Mär 10 18:41:59 matt kernel: DMA zone: 3998 pages, LIFO batch:0
Mär 10 18:41:59 matt kernel: Normal zone: 1744 pages used for memmap
Mär 10 18:41:59 matt kernel: Normal zone: 223230 pages, LIFO batch:31
Mär 10 18:41:59 matt kernel: HighMem zone: 256 pages used for memmap
Mär 10 18:41:59 matt kernel: HighMem zone: 32706 pages, LIFO batch:7
Mär 10 18:41:59 matt kernel: Using APIC driver default
Mär 10 18:41:59 matt kernel: ACPI: PM-Timer IO Port: 0x808
Mär 10 18:41:59 matt kernel: ACPI: Local APIC address 0xfee00000
Mär 10 18:41:59 matt kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mär 10 18:41:59 matt kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Mär 10 18:41:59 matt kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mär 10 18:41:59 matt kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Mär 10 18:41:59 matt kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mär 10 18:41:59 matt kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mär 10 18:41:59 matt kernel: ACPI: IRQ0 used by override.
Mär 10 18:41:59 matt kernel: ACPI: IRQ2 used by override.
Mär 10 18:41:59 matt kernel: ACPI: IRQ9 used by override.
Mär 10 18:41:59 matt kernel: Using ACPI (MADT) for SMP configuration information
Mär 10 18:41:59 matt kernel: smpboot: Allowing 2 CPUs, 0 hotplug CPUs
Mär 10 18:41:59 matt kernel: nr_irqs_gsi: 40
Mär 10 18:41:59 matt kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Mär 10 18:41:59 matt kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Mär 10 18:41:59 matt kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Mär 10 18:41:59 matt kernel: e820: [mem 0x40000000-0xfedfffff] available for PCI devices
Mär 10 18:41:59 matt kernel: Booting paravirtualized kernel on bare hardware
Mär 10 18:41:59 matt kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Mär 10 18:41:59 matt kernel: PERCPU: Embedded 14 pages/cpu @f6bbe000 s33280 r0 d24064 u57344
Mär 10 18:41:59 matt kernel: pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
Mär 10 18:41:59 matt kernel: pcpu-alloc: [0] 0 [0] 1
Mär 10 18:41:59 matt kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258158
Mär 10 18:41:59 matt kernel: Kernel command line: BOOT_IMAGE=../vmlinuz-linux cryptdevice=/dev/sda2:lvmmatt root=/dev/mapper/matt-root ro initrd=../initramfs-linux.img
Mär 10 18:41:59 matt kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
Mär 10 18:41:59 matt kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Mär 10 18:41:59 matt kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mär 10 18:41:59 matt kernel: Initializing CPU#0
Mär 10 18:41:59 matt kernel: allocated 2080248 bytes of page_cgroup
Mär 10 18:41:59 matt kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Mär 10 18:41:59 matt kernel: Initializing HighMem for node 0 (000377fe:0003f7c0)
Mär 10 18:41:59 matt kernel: Memory: 1016432K/1039736K available (4471K kernel code, 448K rwdata, 1320K rodata, 588K init, 972K bss, 23304K reserved, 130824K highmem)
Mär 10 18:41:59 matt kernel: virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc071b000 - 0xc07ae000 ( 588 kB)
.data : 0xc055e28a - 0xc071a200 (1775 kB)
.text : 0xc0100000 - 0xc055e28a (4472 kB)
Mär 10 18:41:59 matt kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Mär 10 18:41:59 matt kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Mär 10 18:41:59 matt kernel: Preemptible hierarchical RCU implementation.
Mär 10 18:41:59 matt kernel: RCU dyntick-idle grace-period acceleration is enabled.
Mär 10 18:41:59 matt kernel: Dump stacks of tasks blocking RCU-preempt GP.
Mär 10 18:41:59 matt kernel: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
Mär 10 18:41:59 matt kernel: NR_IRQS:2304 nr_irqs:512 16
Mär 10 18:41:59 matt kernel: CPU 0 irqstacks, hard=f6408000 soft=f640a000
Mär 10 18:41:59 matt kernel: Console: colour VGA+ 80x25
Mär 10 18:41:59 matt kernel: console [tty0] enabled
Mär 10 18:41:59 matt kernel: tsc: Fast TSC calibration failed
Mär 10 18:41:59 matt kernel: tsc: PIT calibration matches PMTIMER. 2 loops
Mär 10 18:41:59 matt kernel: tsc: Detected 1595.992 MHz processor
Mär 10 18:41:59 matt kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.98 BogoMIPS (lpj=5319973)
Mär 10 18:41:59 matt kernel: pid_max: default: 32768 minimum: 301
Mär 10 18:41:59 matt kernel: Security Framework initialized
Mär 10 18:41:59 matt kernel: AppArmor: AppArmor disabled by boot time parameter
Mär 10 18:41:59 matt kernel: Yama: becoming mindful.
Mär 10 18:41:59 matt kernel: Mount-cache hash table entries: 512
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys memory
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys devices
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys freezer
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys net_cls
Mär 10 18:41:59 matt kernel: Initializing cgroup subsys blkio
Mär 10 18:41:59 matt kernel: Disabled fast string operations
Mär 10 18:41:59 matt kernel: CPU: Physical Processor ID: 0
Mär 10 18:41:59 matt kernel: CPU: Processor Core ID: 0
Mär 10 18:41:59 matt kernel: mce: CPU supports 5 MCE banks
Mär 10 18:41:59 matt kernel: CPU0: Thermal monitoring handled by SMI
Mär 10 18:41:59 matt kernel: Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
tlb_flushall_shift: 6
Mär 10 18:41:59 matt kernel: Freeing SMP alternatives memory: 20K (c07ae000 - c07b3000)
Mär 10 18:41:59 matt kernel: ACPI: Core revision 20131115
Mär 10 18:41:59 matt kernel: ACPI: All ACPI Tables successfully acquired
Mär 10 18:41:59 matt kernel: ftrace: allocating 20082 entries in 40 pages
Mär 10 18:41:59 matt kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Mär 10 18:41:59 matt kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Mär 10 18:41:59 matt kernel: smpboot: CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
Mär 10 18:41:59 matt kernel: Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
Mär 10 18:41:59 matt kernel: ... version: 3
Mär 10 18:41:59 matt kernel: ... bit width: 40
Mär 10 18:41:59 matt kernel: ... generic registers: 2
Mär 10 18:41:59 matt kernel: ... value mask: 000000ffffffffff
Mär 10 18:41:59 matt kernel: ... max period: 000000007fffffff
Mär 10 18:41:59 matt kernel: ... fixed-purpose events: 3
Mär 10 18:41:59 matt kernel: ... event mask: 0000000700000003
Mär 10 18:41:59 matt kernel: CPU 1 irqstacks, hard=f64cc000 soft=f64ce000
Mär 10 18:41:59 matt kernel: x86: Booting SMP configuration:
Mär 10 18:41:59 matt kernel: Initializing CPU#1
Mär 10 18:41:59 matt kernel: Disabled fast string operations
Mär 10 18:41:59 matt kernel: CPU1: Thermal monitoring handled by SMI
Mär 10 18:41:59 matt kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Mär 10 18:41:59 matt kernel: .... node #0, CPUs: #1
Mär 10 18:41:59 matt kernel: x86: Booted up 1 node, 2 CPUs
Mär 10 18:41:59 matt kernel: smpboot: Total of 2 processors activated (6386.96 BogoMIPS)
Mär 10 18:41:59 matt kernel: devtmpfs: initialized
Mär 10 18:41:59 matt kernel: PM: Registering ACPI NVS region [mem 0x3f7ce000-0x3f7fffff] (204800 bytes)
Mär 10 18:41:59 matt kernel: RTC time: 17:41:46, date: 03/10/14
Mär 10 18:41:59 matt kernel: NET: Registered protocol family 16
Mär 10 18:41:59 matt kernel: cpuidle: using governor ladder
Mär 10 18:41:59 matt kernel: cpuidle: using governor menu
Mär 10 18:41:59 matt kernel: ACPI: bus type PCI registered
Mär 10 18:41:59 matt kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Mär 10 18:41:59 matt kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Mär 10 18:41:59 matt kernel: PCI: not using MMCONFIG
Mär 10 18:41:59 matt kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
Mär 10 18:41:59 matt kernel: PCI: Using configuration type 1 for base access
Mär 10 18:41:59 matt kernel: bio: create slab <bio-0> at 0
Mär 10 18:41:59 matt kernel: ACPI: Added _OSI(Module Device)
Mär 10 18:41:59 matt kernel: ACPI: Added _OSI(Processor Device)
Mär 10 18:41:59 matt kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Mär 10 18:41:59 matt kernel: ACPI: Added _OSI(Processor Aggregator Device)
Mär 10 18:41:59 matt kernel: ACPI: Executed 1 blocks of module-level executable AML code
Mär 10 18:41:59 matt kernel: ACPI: SSDT 3f7ce190 000285 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: Dynamic OEM Table Load:
Mär 10 18:41:59 matt kernel: ACPI: SSDT (null) 000285 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: SSDT 3f7ce4b0 000594 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: Dynamic OEM Table Load:
Mär 10 18:41:59 matt kernel: ACPI: SSDT (null) 000594 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: SSDT 3f7ce0c0 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: Dynamic OEM Table Load:
Mär 10 18:41:59 matt kernel: ACPI: SSDT (null) 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: SSDT 3f7ce420 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: Dynamic OEM Table Load:
Mär 10 18:41:59 matt kernel: ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
Mär 10 18:41:59 matt kernel: ACPI: Interpreter enabled
Mär 10 18:41:59 matt kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
Mär 10 18:41:59 matt kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
Mär 10 18:41:59 matt kernel: ACPI: (supports S0 S3 S4 S5)
Mär 10 18:41:59 matt kernel: ACPI: Using IOAPIC for interrupt routing
Mär 10 18:41:59 matt kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Mär 10 18:41:59 matt kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Mär 10 18:41:59 matt kernel: PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
Mär 10 18:41:59 matt kernel: PCI: Using MMCONFIG for extended config space
Mär 10 18:41:59 matt kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Mär 10 18:41:59 matt kernel: ACPI: No dock devices found.
Mär 10 18:41:59 matt kernel: ACPI: Power Resource [PFAN] (on)
Mär 10 18:41:59 matt kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Mär 10 18:41:59 matt kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Mär 10 18:41:59 matt kernel: acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Mär 10 18:41:59 matt kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
Mär 10 18:41:59 matt kernel: PCI host bridge to bus 0000:00
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [mem 0x3f800000-0xdfffffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: root bus resource [mem 0xe4000000-0xfed8ffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
Mär 10 18:41:59 matt kernel: pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
Mär 10 18:41:59 matt kernel: pci 0000:00:02.0: reg 0x10: [mem 0xfe980000-0xfe9fffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:02.0: reg 0x14: [io 0xcc80-0xcc87]
Mär 10 18:41:59 matt kernel: pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:02.0: reg 0x1c: [mem 0xfe940000-0xfe97ffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
Mär 10 18:41:59 matt kernel: pci 0000:00:02.1: reg 0x10: [mem 0xfe880000-0xfe8fffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
Mär 10 18:41:59 matt kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xfe938000-0xfe93bfff 64bit]
Mär 10 18:41:59 matt kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.0: reg 0x20: [io 0xcc00-0xcc1f]
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.1: reg 0x20: [io 0xc880-0xc89f]
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.2: reg 0x20: [io 0xc800-0xc81f]
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.3: reg 0x20: [io 0xc480-0xc49f]
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.3: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xfe937c00-0xfe937fff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Mär 10 18:41:59 matt kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: reg 0x20: [io 0xffa0-0xffaf]
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.2: PME# supported from D3hot
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
Mär 10 18:41:59 matt kernel: pci 0000:02:00.0: [10ec:8199] type 00 class 0x028000
Mär 10 18:41:59 matt kernel: pci 0000:02:00.0: reg 0x10: [io 0xdc00-0xdcff]
Mär 10 18:41:59 matt kernel: pci 0000:02:00.0: reg 0x14: [mem 0xfeafc000-0xfeafffff]
Mär 10 18:41:59 matt kernel: pci 0000:02:00.0: supports D1 D2
Mär 10 18:41:59 matt kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: PCI bridge to [bus 02]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
Mär 10 18:41:59 matt kernel: pci 0000:03:00.0: [1106:3053] type 00 class 0x020000
Mär 10 18:41:59 matt kernel: pci 0000:03:00.0: reg 0x10: [io 0xec00-0xecff]
Mär 10 18:41:59 matt kernel: pci 0000:03:00.0: reg 0x14: [mem 0xfebffc00-0xfebffcff]
Mär 10 18:41:59 matt kernel: pci 0000:03:00.0: supports D1 D2
Mär 10 18:41:59 matt kernel: pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: PCI bridge to [bus 03]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: bridge window [mem 0x3f800000-0xdfffffff] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: bridge window [mem 0xe4000000-0xfed8ffff] (subtractive decode)
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: on NUMA node 0
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Mär 10 18:41:59 matt kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
Mär 10 18:41:59 matt kernel: ACPI: Enabled 1 GPEs in block 00 to 1F
Mär 10 18:41:59 matt kernel: ACPI: \_SB_.PCI0: notify handler is installed
Mär 10 18:41:59 matt kernel: Found 1 acpi root devices
Mär 10 18:41:59 matt kernel: ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
Mär 10 18:41:59 matt kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Mär 10 18:41:59 matt kernel: vgaarb: loaded
Mär 10 18:41:59 matt kernel: vgaarb: bridge control possible 0000:00:02.0
Mär 10 18:41:59 matt kernel: PCI: Using ACPI for IRQ routing
Mär 10 18:41:59 matt kernel: PCI: pci_cache_line_size set to 64 bytes
Mär 10 18:41:59 matt kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Mär 10 18:41:59 matt kernel: e820: reserve RAM buffer [mem 0x3f7c0000-0x3fffffff]
Mär 10 18:41:59 matt kernel: NetLabel: Initializing
Mär 10 18:41:59 matt kernel: NetLabel: domain hash size = 128
Mär 10 18:41:59 matt kernel: NetLabel: protocols = UNLABELED CIPSOv4
Mär 10 18:41:59 matt kernel: NetLabel: unlabeled traffic allowed by default
Mär 10 18:41:59 matt kernel: hpet clockevent registered
Mär 10 18:41:59 matt kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Mär 10 18:41:59 matt kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Mär 10 18:41:59 matt kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Mär 10 18:41:59 matt kernel: Switched to clocksource hpet
Mär 10 18:41:59 matt kernel: pnp: PnP ACPI init
Mär 10 18:41:59 matt kernel: ACPI: bus type PNP registered
Mär 10 18:41:59 matt kernel: system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
Mär 10 18:41:59 matt kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Mär 10 18:41:59 matt kernel: pnp 00:01: [dma 4]
Mär 10 18:41:59 matt kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Mär 10 18:41:59 matt kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Mär 10 18:41:59 matt kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Mär 10 18:41:59 matt kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
Mär 10 18:41:59 matt kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
Mär 10 18:41:59 matt kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
Mär 10 18:41:59 matt kernel: system 00:07: [io 0x0a00-0x0a0f] has been reserved
Mär 10 18:41:59 matt kernel: system 00:07: [io 0x0a30-0x0a3f] has been reserved
Mär 10 18:41:59 matt kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Mär 10 18:41:59 matt kernel: system 00:08: [io 0x04d0-0x04d1] has been reserved
Mär 10 18:41:59 matt kernel: system 00:08: [io 0x0800-0x087f] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:08: [io 0x0480-0x04bf] has been reserved
Mär 10 18:41:59 matt kernel: system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
Mär 10 18:41:59 matt kernel: system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
Mär 10 18:41:59 matt kernel: system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
Mär 10 18:41:59 matt kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Mär 10 18:41:59 matt kernel: system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
Mär 10 18:41:59 matt kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Mär 10 18:41:59 matt kernel: system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
Mär 10 18:41:59 matt kernel: system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Mär 10 18:41:59 matt kernel: system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:0b: [mem 0x00100000-0x3f7fffff] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:0b: [mem 0xfed90000-0xffffffff] could not be reserved
Mär 10 18:41:59 matt kernel: system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
Mär 10 18:41:59 matt kernel: pnp: PnP ACPI: found 12 devices
Mär 10 18:41:59 matt kernel: ACPI: bus type PNP unregistered
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: PCI bridge to [bus 02]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: PCI bridge to [bus 03]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
Mär 10 18:41:59 matt kernel: pci 0000:00:1c.2: bridge window [mem 0x40600000-0x407fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: resource 8 [mem 0x3f800000-0xdfffffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:00: resource 9 [mem 0xe4000000-0xfed8ffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:01: resource 1 [mem 0x40000000-0x401fffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:01: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:02: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:03: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
Mär 10 18:41:59 matt kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
Mär 10 18:41:59 matt kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:04: resource 8 [mem 0x3f800000-0xdfffffff]
Mär 10 18:41:59 matt kernel: pci_bus 0000:04: resource 9 [mem 0xe4000000-0xfed8ffff]
Mär 10 18:41:59 matt kernel: NET: Registered protocol family 2
Mär 10 18:41:59 matt kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Mär 10 18:41:59 matt kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Mär 10 18:41:59 matt kernel: TCP: Hash tables configured (established 8192 bind 8192)
Mär 10 18:41:59 matt kernel: TCP: reno registered
Mär 10 18:41:59 matt kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
Mär 10 18:41:59 matt kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Mär 10 18:41:59 matt kernel: NET: Registered protocol family 1
Mär 10 18:41:59 matt kernel: pci 0000:00:02.0: Boot video device
Mär 10 18:41:59 matt kernel: PCI: CLS 32 bytes, default 64
Mär 10 18:41:59 matt kernel: Unpacking initramfs...
Mär 10 18:41:59 matt kernel: Freeing initrd memory: 4280K (f73d0000 - f77fe000)
Mär 10 18:41:59 matt kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Mär 10 18:41:59 matt kernel: apm: disabled - APM is not SMP safe.
Mär 10 18:41:59 matt kernel: Scanning for low memory corruption every 60 seconds
Mär 10 18:41:59 matt kernel: audit: initializing netlink socket (disabled)
Mär 10 18:41:59 matt kernel: type=2000 audit(1394473306.599:1): initialized
Mär 10 18:41:59 matt kernel: bounce pool size: 64 pages
Mär 10 18:41:59 matt kernel: HugeTLB registered 4 MB page size, pre-allocated 0 pages
Mär 10 18:41:59 matt kernel: zbud: loaded
Mär 10 18:41:59 matt kernel: VFS: Disk quotas dquot_6.5.2
Mär 10 18:41:59 matt kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mär 10 18:41:59 matt kernel: msgmni has been set to 1738
Mär 10 18:41:59 matt kernel: Key type big_key registered
Mär 10 18:41:59 matt kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Mär 10 18:41:59 matt kernel: io scheduler noop registered
Mär 10 18:41:59 matt kernel: io scheduler deadline registered
Mär 10 18:41:59 matt kernel: io scheduler cfq registered (default)
Mär 10 18:41:59 matt kernel: pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
Mär 10 18:41:59 matt kernel: pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
Mär 10 18:41:59 matt kernel: pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
Mär 10 18:41:59 matt kernel: pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
Mär 10 18:41:59 matt kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mär 10 18:41:59 matt kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Mär 10 18:41:59 matt kernel: intel_idle: MWAIT substates: 0x20220
Mär 10 18:41:59 matt kernel: intel_idle: v0.4 model 0x1C
Mär 10 18:41:59 matt kernel: intel_idle: lapic_timer_reliable_states 0x2
Mär 10 18:41:59 matt kernel: tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
Mär 10 18:41:59 matt kernel: GHES: HEST is not enabled!
Mär 10 18:41:59 matt kernel: isapnp: Scanning for PnP cards...
Mär 10 18:41:59 matt kernel: isapnp: No Plug & Play device found
Mär 10 18:41:59 matt kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Mär 10 18:41:59 matt kernel: rtc_cmos 00:02: RTC can wake from S4
Mär 10 18:41:59 matt kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Mär 10 18:41:59 matt kernel: rtc_cmos 00:02: alarms up to one month, 114 bytes nvram, hpet irqs
Mär 10 18:41:59 matt kernel: drop_monitor: Initializing network drop monitor service
Mär 10 18:41:59 matt kernel: TCP: cubic registered
Mär 10 18:41:59 matt kernel: NET: Registered protocol family 10
Mär 10 18:41:59 matt kernel: NET: Registered protocol family 17
Mär 10 18:41:59 matt kernel: Key type dns_resolver registered
Mär 10 18:41:59 matt kernel: Using IPI No-Shortcut mode
Mär 10 18:41:59 matt kernel: registered taskstats version 1
Mär 10 18:41:59 matt kernel: Magic number: 6:667:693
Mär 10 18:41:59 matt kernel: rtc_cmos 00:02: setting system clock to 2014-03-10 17:41:47 UTC (1394473307)
Mär 10 18:41:59 matt kernel: PM: Hibernation image not present or could not be loaded.
Mär 10 18:41:59 matt kernel: Freeing unused kernel memory: 588K (c071b000 - c07ae000)
Mär 10 18:41:59 matt kernel: Write protecting the kernel text: 4476k
Mär 10 18:41:59 matt kernel: Write protecting the kernel read-only data: 1324k
Mär 10 18:41:59 matt kernel: random: systemd-tmpfile urandom read with 2 bits of entropy available
Mär 10 18:41:59 matt systemd-udevd[47]: starting version 210
Mär 10 18:41:59 matt kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Mär 10 18:41:59 matt kernel: i8042: Detected active multiplexing controller, rev 1.1
Mär 10 18:41:59 matt kernel: ACPI: bus type USB registered
Mär 10 18:41:59 matt kernel: usbcore: registered new interface driver usbfs
Mär 10 18:41:59 matt kernel: usbcore: registered new interface driver hub
Mär 10 18:41:59 matt kernel: SCSI subsystem initialized
Mär 10 18:41:59 matt kernel: usbcore: registered new device driver usb
Mär 10 18:41:59 matt kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Mär 10 18:41:59 matt kernel: uhci_hcd: USB Universal Host Controller Interface driver
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
Mär 10 18:41:59 matt kernel: ehci-pci: EHCI PCI platform driver
Mär 10 18:41:59 matt kernel: hub 1-0:1.0: USB hub found
Mär 10 18:41:59 matt kernel: hub 1-0:1.0: 2 ports detected
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
Mär 10 18:41:59 matt kernel: hub 2-0:1.0: USB hub found
Mär 10 18:41:59 matt kernel: hub 2-0:1.0: 2 ports detected
Mär 10 18:41:59 matt kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Mär 10 18:41:59 matt kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
Mär 10 18:41:59 matt kernel: ehci-pci 0000:00:1d.7: debug port 1
Mär 10 18:41:59 matt kernel: ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
Mär 10 18:41:59 matt kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe937c00
Mär 10 18:41:59 matt kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Mär 10 18:41:59 matt kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
Mär 10 18:41:59 matt kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
Mär 10 18:41:59 matt kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
Mär 10 18:41:59 matt kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
Mär 10 18:41:59 matt kernel: libata version 3.00 loaded.
Mär 10 18:41:59 matt kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Mär 10 18:41:59 matt kernel: hub 3-0:1.0: USB hub found
Mär 10 18:41:59 matt kernel: hub 3-0:1.0: 8 ports detected
Mär 10 18:41:59 matt kernel: hub 1-0:1.0: USB hub found
Mär 10 18:41:59 matt kernel: hub 1-0:1.0: 2 ports detected
Mär 10 18:41:59 matt kernel: hub 2-0:1.0: USB hub found
Mär 10 18:41:59 matt kernel: hub 2-0:1.0: 2 ports detected
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Mär 10 18:41:59 matt kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
Mär 10 18:41:59 matt kernel: hub 4-0:1.0: USB hub found
Mär 10 18:41:59 matt kernel: hub 4-0:1.0: 2 poScimmia wrote:Acer Aspire, by any chance? There was a thread on this earlier.
No it's a Noname Netbook. It runs without a graphical user interface (only as a server).
I've downgraded to systemd 208-11 and systemd-sysvcompat 208-11 and the error is gone. So it is definitely a systemd thing.
EDIT:
I figure it is related to this from http://lists.freedesktop.org/archives/s … 17362.html:
* logind is now a lot more aggressive when suspending the
machine due to a closed laptop lid. Instead of acting only
on the lid close action it will continuously watch the lid
status and act on it. This is useful for laptops where the
power button is on the outside of the chassis so that it can
be reached without opening the lid (such as the Lenovo
Yoga). On those machines logind will now immediately
re-suspend the machine if the power button has been
accidentally pressed while the laptop was suspended and in a
backpack or similar.
EDIT2:
Now that I knew what caused this, I googled for "logind suspend lid laptop 210" and found this other thread with the solution.
Last edited by akurei (2014-03-11 19:41:55) -
Wifi network not recognized for long duration after WPS button pressed on ap
I have a TP-Link TP-WA901ND (access point) and it has been working flawlessly I pressed the WPS button on the device to get a wireless printer to acknowledge the network.
Now after 10hrs all the devices and computers see the network except for my z10 and BOLD 9300 until I power cycle the device.
Any ideas?Hello RonnonF
Please read these useful articles;
• KB14477 Unable to connect to a Wi-Fi network on the BlackBerry smartphone
• Speed up BlackBerry Wi-Fi connections a knottyrope...
Good luck.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution -
Disabled Button after having button pressed
Hello,
I have a page with a button "Export".
When I press this Button I branch on a page with
a "csv"-region and redirct to first page.
After saving the report I see the "root" page again and the button "Export" is disabled.
How can I enable this button?
Thanks in advance
Bye UlrikeThanks for the reply,
I actually tried that first. The problem is that I need the procedure to download a custom CSV file. It works with a redirect to a url. I could not make it work from a page process. There are several threads and a how-to about downloading a csv file. Nothing helped me get it to work from a page process.
My whole application revolves around the user selecting some items from a report and clicking a button to get a custom csv built and downloaded. The csv has too many columns to be a report download and the columns may be too wide.
Thanks again,
Cy -
I am trying to buy a used SPRINT IPHONE 4S. Once I buy I plan to UNLOCK it ( Get it unlocked )
Then can I use it with ATT ?
Can someone please tell me whether an unlocked IPHONE can work with any cell company please ?
That will be a quick answer to my question.1. No. iPhones unlocked by Sprint can't be used with a different USA carrier.
2. Not in this case. Sprint only unlocks iPhones for international use.
(121497) -
Macbook Air 2012 goes back to Sleep immediately after waking it up
So I have had this 13inch Macbook Pro for about a month and in that time it has done this about twice already. In order to get it working again I have to wake it up the second time and then it works fine.
I have done the SMC and PRAM reset but that does not seem to help. This usally happens when the Mac is connected to a power supply and goes to sleep by itself after some inactivity. Would like to know if anyone is having a similar issue, if so did you found any solution? Thanks in advance. Just to clarify I am working on a 13 inch Macbook Air with 256GB SSD and using Mountian Lion 10.8.Have also had this issue since purchase. Have tried most solutions, including restoring from a time machine backup file, to no avail.
The issue always happens like this:
1) plug computer in with screen open.
2) macbook air goes to sleep on its own
3) come back to use computer later (usually a few hours later) and take computer off power supply.
4) computer works fine for about 2 minutes
5) computer screen dims for about 2 seconds and then the computer goes to sleep
6) have to hit space bar repeatedly to wake computer up
7) Computer runs normally until plugged in again and then the whole issue starts all over again from step 1.
Anyone help?
Am running 10.8.4. 2ghz Intel Core i7, 8gb ram, 256gb SSD, 11.6" Macbook Air (purchased June 2012) -
Bondi iMac shuts down immediately after startup button light turns green
Is my Bondi blue baby (purchased at the midnight launch of the original iMac) finally dead?
When I push the startup button, it glows amber and the startup chime sounds. A few seconds later, the button glows green for an instant, and the power shuts off. The button then won't do anything unless I unplug the power supply for a few minutes and plug it back in.
I have tried using a paper clip to push the reset button, but to no avail. Also tried zapping the PRAM, as well as starting from a CD, but neither helped.
I know the unit has little value other than the sentimental, but my mother-in-law (who inherited it from me) is used to it and is hoping that I can bring it back to life.
Is there anything else I should try before carting it off to the recycling depot? Thanks!Hey H S,
This is from the service manual for the Bondi:
"The battery on the logic board controls the stored system settings,
such as date and time. It is important to note that the battery does
not affect power at startup."
However this is from page 11 of the s. manual for the 400, SE and DV:
"7 Press the power on button on the front of the computer again.
If the computer won’t start, go to the next step. If the
computer does start, you may have a *bad battery*."
So I always check the battery. Altho' all the won't start cases I've seen where the battery was the cause did not exibit the starts up and shuts down symptom.
Also from the manual:
"Resetting the logic board can resolve many system problems (see
the Symptom/Cure tables for examples). Whenever you have a
unit that fails to power up, you should follow this procedure
before replacing any modules.
1. Unplug the computer.
2. Disconnect the cable that runs from the power supply to the
power filter board on the bottom side of the logic board/mass
storage chassis.
3. Press the Power On button on the front of the unit.
4. Remove the logic board/mass storage chassis from the unit.
5. Remove the battery from the logic board.
6. Wait at least 10 minutes before replacing the battery.
7. Make sure the battery is installed in the correct +/-
direction.
8. Reassemble the computer and test the unit."
There are protection circuits in the iMac and usually a bad PAV ( flyback and HV caps in particular) are the cause of this particular failure symptom.
Richard
Message was edited by: spudnuty -
Down State stays after back button pressed on browser
I have built a Navigation Bar in Dreamweaver CS5. I want the nav images to indicate what page you are on by showing the down image state. This is a check box within the Navigation options "Show 'Down Image' initially". This works fine on all pages as long as you use the buttons to navigate, but when you press the back button on the browser (safari & firefox), the page that you have just come from also stays in the down state, affectively showing 2 down states. Has anybody had a similar problem and can help.
Hi
This is standard behaviour with browser back buttons, if the page is in the browser cache they will display the page in the same state as the cached page.
PZ -
Syncing iPhone aborts immediately after backup
Just started having this problem today. iPhone 3GS, OS 4.0.1, latest iTunes.
I plug in the USB sync cord. Goes through Verifying iPhone. Backs up the iPhone. Says "Syncing iPhone..." and then aborts with no error message, no message at all, with the iPhone device vanished from my left window pane. The iPhone itself still claims "Sync in Progress" but iTunes has nothing else to say.
What's going on here? I tried powering off and on the phone, restarting iTunes, deleting my backups and sync history. Nothing helps. Please, help!
Addendum: I am not syncing calendars or contacts or anything beyond movies, music, and apps.
Message was edited by: StefanGagneFigured it out. ComicZeal, the most recent app I put on the thing, apparently was crashing the sync process.
The complete lack of an iPhone error message or anything to indicate what was going wrong was utterly unhelpful, however. -
Powerbook shuts down immediately after startup
Hi
Our PowerBook has started to automatically sleep immediately after starting up or being woken from its sleep.
For some reason prior to starting up it has always run through a black screen with code similar to the initial DOS code that you'd see on a Windows PC.
This code stays on screen just long enough to read a message that indicates temperature issues, however the mac is not hot in any way.
We also find that if it is shut down for a long period, it will start and run some time before giving up and going back to sleep.
Our guess is that there is a temperature sensor malfunction of some kind. If this is so, what can we do to resolve this.
CraigThere have been many discussions about this problem in these forums, but unfortunately the search feature is currently disabled. However, if you feed Google with the appropriate keywords (e.g. PowerBook narcolepsy temperature sensor) you will find lots of material on this topic including potential cures.
-
Removing a confirmation pop-up after a button click
What I am trying to do is the following:
I have a confirmation popup for a table row delete triggering action 'delete_confirm'.
yes action = 'delete'
no action = 'none'
If they choose yes (delete) the action handler calls the controller method which will call a back end service which takes care of the delete.
The problem I am encountering is that the dialog box will remain on the screen until the back end method call has finished processing. I'd like to dismiss the dialog box immediately after th button push and display the standard WD hourglass + processing graphic while the back-end call processes.
I hope this is clear; if not, I will try to elaborate.Thanks for the response. You are right, I needed a second round trip to process both independently. Unfortunately, I was unable to find a graceful solution. Instead, I used the timer control and manipulated it in such a manner that it fires off an action 1 second after the window closes. It's fairly transparent to the user and they get to see what they are used to in terms of loading so I'll just have to wait until enhancement pack 1 to do this a different way I think.
-
My Ipod is frozen. I've tried holding the power and the sleep button for 10 sec until the apple came on the screen. After this i've tried again to turn it off and to slide the unlock button, but it didn't work! Any Ideas????
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Ipod nano error when turned on
When i turn on my nano it shows an icon saying www.apple.com/support..help please? what do i do? Sony Windows XP
-
Slideshow in Finder (or anywhere but Iphoto)
Previous discussions are all archived and don't appear relevant--none of the fixes proposed there work, and my iMac is a year old, so maybe the software was changed. All I want to do is run a photo slideshow in Finder. References to Spotlight and Pre
-
Hi Gurus Im trying to create a purchase order for a component using CNMM but i get the error message : ME648 Tax code V0 in schema TAXUSX invalid. If i convert the purchase requisition from ME21N everything works fine Any ideas what could be missing?
-
Hi all, i have stock in mmbe under storage location "0500", valuation type 'N' but when i created a line item in SO with same material and in sales A with valuation type as 'N' as shown below instead of confirming on same date, as there is enuf stock
-
Change page orientation? CS5.1
Because having page orientation under Document Setup made too much sense, Adobe, apparently, moved it. I have a page in Landscape. I want to change it to Portrait. Does anyone know how to do this basic thing? Thank you!