Iphone sound suddenly stops for some applications

My I phone sound not working for games and some appliations also key pad sound is not workin? rest for songs and calling its fine how can i fix this? i have tried reset but its not fixed.
Please help

' Same here, 2.8.003, SB0467. I'm running a 5. analog setup and several times since I installed the card last week, the sound would stop coming out of the 3 front speakers, and only come out of the rear until I either restarted the PC or switch the modes.
I dual boot windows 7 RTM x64 and Vista x64 and it has happened on both of them.

Similar Messages

  • My iPhone sound suddenly stopped working.

    I have had my iPhone 4s for over a year with no problems other than the occasional slow down, etc. Just last night, the sound on my phone randomly stopped working. It will work for a few seconds then stop, and just keep doing it. Its my ringtone, text tone, keypad tone, music, and video apps. I've tried turning the phone on and off with no luck. I just want to know why my phone has suddenly started doing this when it was just working fine and how to fix it. Please help?

    None of these methods worked, so I just took a very thin paintbrush and dampened it using a Clorox wipe. Then, I just wiggled it around in the charging port. The sound worked for like 3 seconds then it stopped again. So I continued to clean it and it worked! After I listened to my music for about 30 minutes until it stopped again. I just blew hard into the port and it started working again. I think the problem was that the phone thought it was docked into speakers because it was so dirty. I think I'm going to get an Otterbox so this doesn't happen again. I hope I helped.

  • HT4623 My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the char

    My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the charger.

    Try different USB Cable, try different Charger. Clean iPhone charging port with clean dry toothbrush. If still problem and you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no coverage, most likely it could be battery or charging port assembly that need replacement.

  • My iPhone 5 suddenly stopped opening the Apple Mail app.  It had worked flawlessly for years, but just stopped.  It worked on my iPad, and of course on the computer.  What's going on, and how do I fix it?  I've turned the phone on and off several tim

    My iPhone 5 suddenly stopped opening the Apple Mail app.  It had worked flawlessly for years, but just stopped.  It worked on my iPad, and of course on the computer.  What's going on, and how do I fix it?  I've turned the phone on and off several times, soft reset several times.  There was no change in any settings when this happened, nor any new apps were added.  Thank you for any help you can give.

    Does it not work either way? Sending and receiving? Did you check the settings and make sure that nothing has changed? If you can receive email, but not send it, check the outgoing mail server setting. Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • Sound suddenly stopped

    I was listening to my iPod 5th generation (30gb, video) a few days ago when the sound suddenly stopped. The controls continued to work, as did the display, but no sound came through the headphones. I tried other headphones, and still nothing. I followed the "5 R's", and it still didn't work. I ensured that I have the latest edition of iTunes and software for my iPod, prior to restoring. And THEN, upon restoring, I tried to sync my iPod again to get all of my music back onto it, and after syncing a portion of the music, a dialog box appears in iTunes that says that it can't continue, and that an unknown error occurred. So now I have an iPod that won't sync properly AND won't play any sound. I've only had it about 8-9 months, and I'm really hoping somebody has some knowledge of these problems.
    Thanks for reading and trying to help!

    This is the closest I could find to what i am experiencing. I have a suspicion that several of my songs may have gotten corrupted but I don't know how or why and much less...how to prevent further corruption!!!
    Here it goes...
    All my songs work fine and have worked fine for over a year now. I recently updated itunes and it seems that this is when the problem appeared. (Unless it is a coincidence?) I have now counted six songs out of about 300 that suddenly stop either in the middle of the song or towards the end of the song. The music stops the timer stops but I am able to use the control to go to the next song or even to previous time frame within the same song that suddenly stopped. However when I go to an earlier part of the "stopped" song it can no longer be heard. I use these songs everyday and they were fine before Friday.
    What has happened to these particular songs and why? but more to the point how do I fix the problem and how do I prevent it in the future??? Has anyone had this similar trouble?
    Thank you!

  • I updated my computer to os x 10.5.8 so I can synchronize iphone with itunes.  For some reason computer does not noticed it has been updated.  Can anyone advise?

    I updated my computer to os x 10.5.8 so I can synchronize iphone with itunes.  For some reason computer does not noticed it has been updated.  Can anyone advise?

    Try what Terence Devlin posted in this topic:
    Terence Devlin
    Apr 14, 2015 11:21 AM
    Re: Is Iphoto gone ? i want it back!
    in response to Johannes666
    Recommended
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • TS3899 My iPhone 4s suddenly stopped receiving incoming mail.

    My iPhone 4s suddenly stopped receiving incoming mail.  I am still able to send from my iPhone but not receive.My email is still coming through on the desktop, sending anbd receiving.

    Thanks for the reply. The SMTP is the Outgoing , which is working.  I cannot find the incoming settings though. Are there any? The settings were never changed by me, I think there has been a network change somewhere. AT&T or Apple. I have rebooted several times, and even did a restore.  Same problem. The "checking email" and "last Updated xx/xx/xxxx" message at bottom of screen just constantly flashes on and off when I check email.
    I can send email from my iPhone ok.

  • My sound suddenly stopped working, how do i fix this?

    my sound suddenly stopped working after i unplugged my headphones, how do i fix this?

    Common problem.
    Check the headphone port - if you can see a red light, the port is still live, cutting off the internal speakers.
    The cause is a little leaf switch that is pushed over by the jack when you insert it. Sometimes these stick.
    Try inserting and removing a jack a few (dozen) times.
    If that doesn't free it you may attempt to tease it with a slim non-conducting tool (like a toothpick). Ensure the Mac is not only shut down, but unplugged if you try this.
    And be careful; the leaf is fragile and it's an expensive bit to get to and replace, in fact on some models it's directly on the logic board.

  • Sound suddenly stops working (Youtube)

    Hi!
    Since I installed a Flash Player update 1-2 months ago, the sound in almost half of the videos I watch on Youtube suddenly stops working (usually only in videos that are longer than 10 minutes). First there's a short crackling sound (not all the time, though) and then the sound simply stops, even though the video is still playing. Reloading the page or jumping ahead a few minutes, then going back to the original spot usually only fixes it for less than 5 minutes and if I do that 2 or 3 times, the sound won't even be there for more than a few seconds. Restarting Firefox doesn't help, either. If I want to try again with the same video a few days later, the problem occurs again.
    I'm using headphones (Sennheiser HD 201) that are plugged into speakers (Logitech X-140) but I'm 100% sure that those aren't the culprits since I can listen to mp3s, watch videos (avi, mp4, doesn't matter) or play games just fine and the problem has never ever occured while doing that. So it definately has something to do with the update 1-2 months ago and the latest update (maybe a week ago) didn't fix it. I also already saw a few comments on videos I'm experiencing the problem with about the sound suddenly stopping.
    OS: Windows 7 (64 bit)
    Browser: Firefox (36.0.4) - also tried loading the video in IE11 but all the buttons (quaility settings,...) were missing, so I closed it again.
    Flash Player: 17.0.0.134
    Any idea how I can fix the problem and if there's already a fix in the works?

    Most of the videos on YouTube these days are HTML5.  If you right-click on the problem video, are you getting About Flash Player, or About HTML5?
    If it *is* Flash, do you have the same problem if you disable Hardware Acceleration?  See the section on it in the troubleshooting guide below:
    Video playback issues

  • TS2755 My husband and I have iPhone 4S's.  For some reason, my text messages show up on his phone.  We share the Apple ID, and my settings are such that I send and receive from my phone number and email address. How do we correct this?

    My husband and I both have iphone 4S's and for some reason he gets my text conversations w/ other people.  We share the apple ID and I have my settings set to and from my phone # and email address.  He is getting tired of being apart of text messages I am on.  How do we remedy this?

    Each of you need to have your own apple id's instead of sharing is the best way. But you can go to each phones settings, messages, send and recieve, and down to start new conversation from, and make sure each of you have your own email address with a check mark beside of it not the same address.

  • When the Wifi is connected, the iphone seems to search for some site and if firewall does not allow the access to that site, it disconnects the connection to Wifi. Can anyone help on this?

    When the Wifi is connected, the iphone seems to search for some site and if firewall does not allow the access to that site, it disconnects the connection to Wifi. Can anyone help on this?

    Hi SBEG2015,
    I'm sorry to hear you are having these issues with your iPhone. Based on your description of what has happened and the symptoms you are seeing, you may need to have your iPhone evaluated and/or serviced. You may find the following page helpful:
    Apple - Support - Service Answer Center
    Regards,
    - Brenden

  • My iPhone 4S suddenly stopped synching with my Outlook after I downloaded latest updates. I get this message: iTunes unable to load provider data from Synch Services. Reconnect or try later. What to do?

    My iPhone 4 suddenly stopped synching to my Outlook 2010. This may be a result of downloading the recent iPhone and iTunes updates. I get this message: "iTunes unable to load provider data from Sync Services. Reconnect or try later."  Another message tells me to delete the back up data on my computer as it is corrupted. I cannot locate this back up data. What should I do?

    got that once a reboot and it was fine again

  • Password Problem for some applications:

    Password Problem for some applications: I'm unable to download Adobe Reader, Microsoft updates.  I have no password set to start the computer, applications such as Pages, Numbers, Keynote require no password for updates. 
    When I try to update Microsoft or Adobe Reader, first I try with no password, I get a hint and I know exactly what it means, but still unable to download.  I don't know enough about passwords as to why some I can download and others I can't.  So I don't know what I should read.  I'm the only user of this computer and prefer not to have to deal with passwords.  I'm using a MacBook Pro, Mac OS 10.9.3

    Oh what a tangled web we weave.  I read up on keychain and I don't understand what I'm reading.  Right now I cannot download my email on my computer, I can access it through the cloud. I'm sure it will be the same for the other iCloud feathers.   When I go to preferences and select iCloud when ever I try to sign in I get some dialog box it shows up "A keychain cannot be found to store 1076701306.  It doesn't matter whether I reset it or cancel it out iCloud preferences remains grayed out. 
    In keychain access on the left side under keychains and Read's local item, systems, and systems roots.
    When I select local items nothing shows up to the right under the name column even when down under all items is selected nothing shows up.  And nothing shows up to the right when under categories I selected the other options password etc.  On the other hand when I select under keychains systems, systems roots I do get items to show up on the right side under names under all items, passwords, etc.  Where do I start?

  • What is the fix for some applications repeatedly asking permission to accept incoming connections?

    What is the fix for some applications repeatedly asking permission to accept incoming connections?
    On every restart, AutoPairs and Epson Event Manager asks me to reject or agree to allow incoming connections. It is very aggravating and time-wasting. I know other Mac users who have the identical problem with other applications on their Macs.
    Isn't there some way to make my Mac understand that "Yes" means "Yes" once and for all?
    I am presently running Yosemite, but this was a problem with prior OS X versions too.
    Respectfully,
    Nate

    This is a comment on why you might, or might not, want to use the built-in Application Firewall.
    The firewall blocks incoming network traffic, regardless of origin, on a per-application basis. By default it's off, and when turned on, it allows applications digitally signed by Apple, and only those applications, to listen on the network. It does not block outgoing traffic, nor can it distinguish between different sources of incoming traffic, nor does it filter traffic by content.
    No matter how it's configured, the firewall is not, as some imagine, a malware filter. If that's what you expect it to do, forget it. All it will do is bombard you with pointless alerts.
    Consider some scenarios in which you may expect the firewall to be useful.
    1. You enable file sharing, and you allow guest access to certain folders. That means you want people on your local network, but not outsiders, to be able to access those shared folders without having to enter a password. In the default configuration, the firewall will allow that to happen. The router prevents outsiders from accessing the shares, whether the application firewall is on or off. But if your computer is portable and you connect it to an untrusted network such as a public hotspot, the firewall will still allow access to anyone, which is not what you want. It does not protect you in this scenario.
    2. You unknowingly install a trojan that steals your data and uploads it to a remote server. The firewall, no matter how it's configured, will not block that outgoing traffic. It does nothing to protect you from that threat.
    3. A more likely scenario: The web browser or the router is compromised by an attacker. The attack redirects all web traffic to a bogus server. The firewall does not protect you from this threat.
    4. You're running a public web server. Your router forwards TCP connection requests on port 80 to your Mac, and the connections are accepted by the built-in web server, which is codesigned by Apple. The application firewall, still configured as above, allows this to happen. An attacker hacks into the system and tries to hijack port 80 and replace the built-in web server with one that he controls. The good news here is that the firewall does protect you; it blocks incoming connections to the malicious server and alerts you. But the bad news is that you've been rooted. The attacker who can do all this can just as easily turn off the firewall, in which case it doesn't protect you after all.
    5. You're running a Minecraft server on the local network. It listens on a high-numbered port. You, as administrator, have reconfigured the firewall to pass this traffic. An attacker is able to log in to a standard account on the server. He figures out how to crash Minecraft, or he just waits for you to quit it, and then he binds his own, malicious, Minecraft server to the same port. The firewall blocks his server, and because he's not an administrator, he can't do anything about it. In this scenario, the security is genuine.
    6. Here is a more realistic scenario in which you might have reason to enable the firewall. Your MacBook has sharing services enabled. You want those services to be available to others on a home or office network. When you're on those networks, the firewall should be off. When you move to an untrusted network, you can either turn off all the services, or enable the firewall with a non-default configuration to block them. Blocking is easier: one click instead of several.

  • How can I hide my cam for some applications like messenger, skype, etc.

    Hi,
    How could I hide my cam for some applications?
    Thanks in advance!

    There's a support file in the System/Library/QuickTime folder that you can move elsewhere temporarily: QuickTimeUSBVDCDigitizer.component. Don't delete it, just move it. Any apps you open from that point will not have access to the camera. Move the file back to re-activate it (you may need to reboot).
    There is also an AppleScript to do the same thing, but I can't guarantee it works for 10.8.
    http://techslaves.org/isight-disabler/
    Matt

Maybe you are looking for