Iphone Sound volume

I have tried to troubleshoot the low sound volume of the 2 iphone my wife and myself just bought but the sound volume still remains low as compared to my previous treo. Can any one help me?
Thanks.

Well the iPhone is a different phone than the Treo so of course sound is going to be different.

Similar Messages

  • The text/email/alerts sound volume has gone right down on my iPhone 4

    The text/email/alerts sound volume has gone right down on my iPhone 4, but the ringtone volume is still loud! Adjusting the volume in "Settings" only changes the ringer volume, I just can't find a way to increase the alerts volume! Help please!!!

    Hi ecsands,
    Thanks for visiting Apple Support Communities.
    To "Choose alert sounds, adjust the alert volume, or turn vibrate on or off: Go to Settings > Sounds."
    For more information, see Pg. 28 - 29 of the iPhone User Guide:
    http://support.apple.com/manuals/#iphone
    If adjusting the volume doesn't help, see the "Acoustic-speaker/microphone/receiver" section of this article for some troubleshooting steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Jeremy

  • My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

    My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

    I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
    Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong.

  • Hi. For some reason my iPhones sound for all ring tone, lock, music loudspeaker has become very foamy and can hardly hear it. Both speakers are still working however just at low sound. In settings volume is turned up and bottons on the side are fully up.?

    Hi. For some reason my iPhones sound for all ring tone, lock, music loudspeaker has become very foamy and can hardly hear it. Both speakers are still working however just at low sound. In settings volume is turned up and bottons on the side are fully up.?

    maybe there are dirt, sand and lint in the speaker output grill ?

  • Every Since I Downloaded iOS5 O My IPhone My Volume Has Been Effected It's @ Max But Incoming Calls Come In @ A Minimum. When Taking A Call Thru Speaker Caller Sound Very Faint. Music Sounds Very Low Can Somebody Help Me ?

    Every Since I Downloaded iOS5 O My IPhone My Volume Has Been Effected It's @ Max But Incoming Calls Come In @ A Minimum. When Taking A Call Thru Speaker Caller Sound Very Faint. Music Sounds Very Low Can Somebody Help Me ?

    Hello ElleMalloy,
    Sorry Im Just Responding Phone Has Been Downloading And Charging.
    Well I Will Start Here,
    I Tried Everything I Even Restarted My Settings Just So I Can See if That Would Work Because Someone Sujested It But What They Neglected To Say That Their Probrolem Was With A Ipad ? Anywho To Keep It Short I Went Online Logged A Complaint With Apple Made A Appointment With A Apple Store In My Area To Take The Phone There After Trying Everything (Resetting, changing setting etc..........) Nothin Worked Upon Taking The Phone To The Store They Swapped Out My Phone For A New One Volume On New Phone Is Perfect And I Only Had To Wait 40 Minutes

  • Does the iPhone 4S volume speaker is not loud?

    Doed the iPhone 4S volume speaker is not loud?

    If you are asking for the relative volume of the speaker, it should be loud enough to make calls in a quiet to moderately loud room via speakerphone or otherwise.
    If you are asking if it is normal for sound to only come out of one side of the speaker at the bottom of the phone, then yes. One side is the speaker, and the other side is the microphone.

  • My iPhone sounds aren't working why is this?

    My iPhone sounds such as: Keyboard clicks, new message tones, lock sounds, new mail sounds, or any type of alerts aren't working, music also isn't audible. When I plug the headphones in I can hear everything, but without the headphone I can't hear anything except for the ringer. Why is this? Is there something wrong with the headphone port? or is there something wrong with the phone? I've had this phone since late February of 2008 and haven't experienced this problem until today. I have turned it off and on and that doesn't seem to help. Any idea what this is?

    You know what, that did the trick! I think something was wrong with the headphone port because I clicked the side volume button and it kept coming up as "Headphone (ringer)" I put the headphones in and out a couple of times and then it went back to normal. Thanks for the tip!

  • My iPhone 4S volume is not working

    My iPhone 4S volume doesn't work sometimes without the earphones and without. When turn up the volume buttons there's nothing pops up. What do I do

    Hello Gemese,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Hi,I have 4s,I have a problem since 2days that the ring tone,lock sound,password sound,volume button and slide,calls flash,all sometimes working and sometimes not,plz help me to solve this problem.thanks

    HI
    i have iPhone 4s with iOS 8.1.3 , since 2 days I'm facing a problem that the ring tone,lock button sound,password sound,volume buttons,slide volume and incoming call flash,
    all these not working properly , sometimes it will work and sometimes it will not, I tried to restart the phone many times but I didn't fix the problem
    plz help me to solve this problem

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • What move to make for iphone speaker volume

    I have been reading all kinds of goods and bads about the iphones speaker volume over the last week. Yes ipod sounds good to me (Not to where I would ever wanna listen to it in speaker mode.) And NO, my speaker phone does not sound good. Way too low. Im starting to wonder if the people in the forums are saying theirs sounds fine because they have only tested it where there is silence. I'm not looking to be able to hear any speaker phone in the middle of a crowded bar, but I can not even hear it when it is all the way up and sitting beside me in the car, with the windows up. I find myself grabbing it and putting it right near my ear. So....... has anyone determined if this is a software issue or a hardware issue? Should I be bringing my iphone back or wait out the software update? I am surprised that with the release of the phone and all the questions being posted there is no portal for apple employees or techs to address some of these questions like a faqs page targeting some of the consistent questions over the last week. And don't get me wrong I love my iphone and i am not amongst the crew of people in these forums bashing it. Never owned a blackberry or treo or any of that stuff. I said years ago i will purchase something like that when apple puts one out. Never owned a pc in my life and I embrace this phone.

    has anyone determined if this is a software issue or a hardware issue?
    I assume since the iPod is capable of putting a fair bit of volume through the earpiece that it's a software problem. Have you turned-off volume limits in Settings?
    Should I be bringing my iphone back or wait out the software update?
    Tough call, if you're trying to decide by the 14 day window. Call Apple under warranty service, tell them if they can't guarantee a volume fix you're going to have to return the phone?
    You can ask Apple for iPhone changes via this link:
    http://www.apple.com/feedback/iphone.html Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.

  • IPhone 4S volume sometimes doesn't work ?

    My iPhone 4S volume sometimes will stop working and the volume slider will disappear and go grey , the ringtones work and everything it's just very annoying !

    Hi Matthew. Lawless,
    Thanks for visiting Apple Support Communities.
    If you do not hear sound from the iPhone speaker, try these steps:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the article with these steps here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Best,
    Jeremy

  • Cannot adjust ear piece sound volume while Incoming call

    Receiving an imcoming call with ear-piece plugged, the sound volume becomes maximum and cannot be adjusted from both ear-piece and iPhone side button.
    Playing music, the sound volume is normal and ear-piece and side button are adjustable.
    Thank you and look forward solutions.

    From the iPhone user manual, Restarting or resetting iPhone
    If something isn’t working right, try restarting iPhone, force quitting an app, or resetting iPhone.
    Restart iPhone: Press and hold the On/Off button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off button until the Apple logo appears.
    If you can’t turn off iPhone or if the problem continues, you may need to reset iPhone. A reset should be done only if turning iPhone off and on doesn’t resolve the problem.
    Reset iPhone: Press and hold both the On/Off button and the Home button for at least ten seconds, until the Apple logo appears.
    For more troubleshooting suggestions, see Appendix B, “Support and Other Information”
    User troubleshooting steps, Appendix B, page 157 http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • E-61 sound volume

    i have an e-61 in which recently i am facing a problem, i.e. the "up" sound button is not working, it seems. Try as i might, the "up" sound button does not respond, leaving me to strain to hear the conversation. Is there any other way to increase the sound volume, so that I can hear the other person more clearer.

    Try connecting a headset to the phone that has a volume control, this way you can increase the volume temporarily until you can get the phone to a Nokia care point to be fixed.
    Simply plug the headset in, dial a number such as your voice mail and then adjust the volume up. When you unplug it the volume should stay at the same level you last set it i.e. full volume.
    iPhone 5 32GB
    MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

  • Iphone 4 volume buttons not working

    iphone 4 volume and mute buttons not working, checked all settings they are all fine and when headphones in it works??? When I take out headphones the volum buttons do not work, when phone rings or text receives only vibrates???? HELP!!!!

    This could be due to some debris or dirt inside the  headphones jack that makes the iPhone think that the headphones are connected even when they are not.
    Try to see if you can clean the jack being very careful, with canned air as sold in electronics store.  Some people have been successful by introducing and withdrawing the headphones jack several times in a row to displace whatever is in there if it is lodged in.
    Avoid introducing anything else like a pointed object.  You could damage the jack.
    If all of this does not work, I would try first resetting the phone by holding the home button and the power button together for about 15 seconds or until the whilte apple appears, then waiting until the phone resets.  If the problem continues after this, take it to an Apple Store to see what they believe should be done.

  • Why does sound volume turn down to zero automatically

    I just upgraded to IOS5.  I set my sound volume to high in settings, but I notice that it does not ring soon after that. When I look at the settings again, the speaker volume setting has moved completely to the left (low). Is anyone else having this problem.

    Yes, I have seen this problem.  Sometimes it happens, sometimes it does not. 

Maybe you are looking for

  • BPM- Switch Condition ?

    Hi All, I have a question regarding the usage of Switch condition (Like Option) in BPM. For Example I want to give a condition such that I should pass all the messages starting with 'J' followed by any letter. Thanks in advance

  • Where can I get codec for ISO files?

    Where can I get codec for ISO files?Premiere Elements

  • Solman 4.0 with MS SQL Server 2000

    I want to install Solution Manager 4.0 with MS SQL Server 2000. But I've the dvd's of Solution manager 4.0 with MS SQL Server 2005. I've still the software for MS SQL Server 2000 from an other installation . Is there any problem to install Solution M

  • Idoc collective processing

    Hi We have a custom idoc(Inbound) for posting goods movements...Actually it does goods movements through two seperate BDC calls and returns the material document number in the status.When we process two or more idocs through a batch processing at a s

  • Please help with Elements 10

    I'm trying to create a photo book in Elements 10 but the program will not allow me to proceed without signing in to my Adobe account. When I try to do that, the program gets stuck - it says "Signing in...." but never gets past that. It's just stuck.