IPhone speaker volume changes when connected to apple tv

If anyone has had this problem as well I would be interested but when I first got my iPhone 4S I realized it was loud. After disconnecting from the apple tv my max volume is lower. When I reconnect to the apple tv (by using it to play music from my phone) the my volume is louder again. Is this a bug or just my phone. Lol. And yes my volume is maxed out in both situations. It's almost like the speakers get boosted when connected to a different audio source.

You would need to connect the speakers to the apple tv if that is where the video is playing.

Similar Messages

What move to make for iphone speaker volume

I have been reading all kinds of goods and bads about the iphones speaker volume over the last week. Yes ipod sounds good to me (Not to where I would ever wanna listen to it in speaker mode.) And NO, my speaker phone does not sound good. Way too low. Im starting to wonder if the people in the forums are saying theirs sounds fine because they have only tested it where there is silence. I'm not looking to be able to hear any speaker phone in the middle of a crowded bar, but I can not even hear it when it is all the way up and sitting beside me in the car, with the windows up. I find myself grabbing it and putting it right near my ear. So....... has anyone determined if this is a software issue or a hardware issue? Should I be bringing my iphone back or wait out the software update? I am surprised that with the release of the phone and all the questions being posted there is no portal for apple employees or techs to address some of these questions like a faqs page targeting some of the consistent questions over the last week. And don't get me wrong I love my iphone and i am not amongst the crew of people in these forums bashing it. Never owned a blackberry or treo or any of that stuff. I said years ago i will purchase something like that when apple puts one out. Never owned a pc in my life and I embrace this phone.

has anyone determined if this is a software issue or a hardware issue?
I assume since the iPod is capable of putting a fair bit of volume through the earpiece that it's a software problem. Have you turned-off volume limits in Settings?
Should I be bringing my iphone back or wait out the software update?
Tough call, if you're trying to decide by the 14 day window. Call Apple under warranty service, tell them if they can't guarantee a volume fix you're going to have to return the phone?
You can ask Apple for iPhone changes via this link:
http://www.apple.com/feedback/iphone.html Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.

Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

My iPhone 5 is freezing when connected to the charger. This is not happinning if it is connected to the computer USB. How to solve this problem?

My iPhone 5 is freezing when connected to the charger. This is not happinning if it is connected to the computer USB. How to solve this problem?

Possibly faulty charger. The supplied Apple Charger is covered by the iPhone Warranty. Make Genius reservation or set up service and take or send iPhone and Charger to Apple for resolution.

My iPhone shows error -50 when connect to iTunes

my iPhone shows error -50 when connect to iTunes. What can i do? What does it mean?

http://support.apple.com/kb/TS1583

My iphone wont turn on when connected to a laptop or pc,but when its connected to my dock, its shows it need restoration what should i do?

my iphone wont turn on when connected to a laptop or pc,but when its connected to my charging stereo,its shows i need to conect to itunes but then after 10-15 min. it turns off.

Hi Monzairita,
Thanks for visiting Apple Support Communities.
If your iPhone only powers on when connected to a dock, and shows the "connect to iTunes" screen, start with these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best Regards,
Jeremy

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported"

My iPhone 5 got problem when connect with lighting cable, this will keep pop up message "this accessory may not be supported", I can't charge or sync at all. I tried plug and unplug many time, still can't detect/charge my iPhone5, but sometime will 'lucky' that can connect to my iTunes and charge battery…
This message will auto pop up also when I don't have plug anything in my iPhone 5, It is very annoying…
The lighting cable is original and now i'm using OS 7.0.4 / iTunes is 11.1.3
What I can do to fix this problem? Thank you.

I would try using another cable you can likely borrow one to test from somebody
if it's the same then likely the connector in your iphone have been damaged

Does the iPad ignore the volume control when connected to the Digital AV Adapter?

Does the iPad ignore the volume control when connected to the Digital AV Adapter?

The volume limit is preset so yes you are unable to alter the volume on the iPad however you can control the volume on your tv and if you have AirPlay speakers you are able to adjust your volume as well..

Does the iphone cpu frequency change when the cpu load is different?

Does the iphone cpu frequency change when the cpu load is different, or it does not change, stay a fixed frequency? if it changes, how can i get the realtime cpu frequency?if anyone knows,please tell me, thank you so much!!!

As a general, historical statement Tonefox is correct. For certain particular cpus woodmeister is correct. Cpus have historically been single frequency units, though over-clocking has been done for several years. Doing so pushes the cpu beyond its guaranteed speed, but has tended to work since most cpus from quality vendors will actually operate at higher speeds. The manufacturer just does not guarantee the results...remember the Pentium fiasco in the early years of that chip? Today manufacturers are ceertifying particular product lines for over-clocking on a periodic basis. And that is what dynamic clocking really is, over-clocking but not at a constant clock speed as has been done in the past.
Much of the silicon on the market will function at higher clock rates, the only question is does the maker guarantee the accuracy and performance at those clock rates.

My iphone won't synch when connected

My iPhone will not synch when connected to my iMac. It just started happening. It an iPhone 5, all apps and software are up to date.
Thanks
jim

I a;ready take off the acces of the computer and reput it

HT1668 My iPhone won't change when I turn to side, how do I fix

My iPhone won't change when I turn to side, how do I fix

Make sure you don't have it locked in portrait mode. Is there a symbol at the top right of the phone (near battery indicator) that looks like a padlock with a circle round it? If so, you turn it off by double clicking home button to bring up the multitasking bar and swiping to the right to uncover the button which controls this.

Where have my speaker volume and internet connection notification icons gone?

This morning two 'notification icons' (at bottom right of screen) vanished: speaker volume, and internet connection. How do I restore them?
I have Firefox 6.0.2 running on Windows Vista

Great, thanks you two, much appreciate the help. They only say it will be restored ASAP. Has this happened before and how long did it take to fix? Also, I'm in the UK so I assume its a global issue?
Thanks

Volume changing when locking iphone 5

Hi I noticed a couple of times that for some reason after listening to music for a while suddenly the volume starts acting funny. When I lock the Iphone while listening to music the volume increase to the max. and If I unlock the iphone the volume goes to the level I had it before. and this repeats. If locked (using lock button at the top) the volume goes to max again if unlocked the volume goes to the level I had it. I had to restart the music app to stop this. Is this a known bug? Any thoughts?
Regards,

Hey dargan,
Thanks for the question. Dust and debris can definitely lead to this issue. If there is any sort of debris in the headphone or lighting port, the phone might think that there’s an accessory connected. For more information, see this resource:
If you don't see the iPhone Volume slider - Apple Support
http://support.apple.com/en-us/HT203029
Thanks,
Matt M.

My iPhone will only operate when connected to the PC, 2 minutes max after I disconnect it, the screen reverts to black with the apple logo and then completely black. Restoring makes no difference; any ideas anyone? en

my iPhone fell on the floor yesterday; now it will ony operate when connected to the PC - then it works fine. If I disconnect it from the PC, the screen reverts to black with the apple logo, eventually completely black; iPhone is unresponsive until reconnected to PC. Any ideas anyone?

You broke it.
It's time to find yourself a competent 3rd party repair shop or just buy a new phone. I believe you can get an out of warranty replacement from Apple for $149 (not absolutely positive they still offer them for the 3G), but given the age of the phone and the cost, a new one might make more sense.

Volume changes when headphone are plugged, but not when they are unplugged.

Hi!
Recently I been having an issue with my Macbook Pro 13.
When I connect my headphones to the MBP, the volume changes (as it should be), but when I take them out it doesn't return to normal, it just stays where it was when the headphones were connected.
Now, if i mute my internal speakers and connect the headphones the volume changes, but when i take them off, the volume returns to mute. So the problem is when both (internal speakers and headphones) are set to different volumes.
Here's a video that shows what happens in sound control panel (it's in spanish, "Auriculares"= Headphones and "Altavoces Internos"= Internal Speakers)
http://www.youtube.com/watch?v=EdNttRFnxE8&
Does anyone else have this issue?
Thanks for your answers!
Andrés

Try a hard reset of the Nano. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
I assume you have double checked to make sure you are plugging the headset all the way in meaning the white part of the headset is flush with the body of the Nano?
B-rock

IPhone speaker volume changes when connected to apple tv

Similar Messages

Maybe you are looking for