IPhone speakers don't work when getting calls
i have a very specific speaker problem:
My speaker don't work but only when receiving or making calls. It does work in all other apps. It also works fine when making a call and using either headphones or when using the speakerphone.
Tried turning on and off. Tried reseting. Tried cleaning the headphone jack. Tried holding on the lower right side of the phone (people actually say it worked for them).
See Here...
TROUBLESHOOTING iPhone Hardware
http://support.apple.com/kb/TS2802
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or Authorized Apple Service Provider is the Next Step... Be sure to make an appointment first...
Similar Messages
-
IPhone speaker does not work when switching call to hands free option
having problems with IPhone speaker, not working when switching phone calls to speaker mode, any suggestion?
Same problem - I was on the phone last night and the speaker switched off and can't figure out what happened. I tried to reset the phone, no sound is working. I can hear a phone call if I hold it up to my ear. Very frustrating as my phone is less than 3 months old. Tracy
-
The internal speakers of my iPhone stopped working. There is sound through the ear phone connecter and if it's in a cradle. No trama to the device that might have caused it. Any suggestions on how I might get them to work again?
ThanksNo. And I've gone into Settings and checked everything I could think of.
-
My iPhone 4 speakers don't work with music it only works when I get calls
When I try to play music or videos my iPhone speakers don't work but when I get a phone call it works and I've tried everything to get them to work but no result yet. The first time it happened it was because there was lint in my speakers but I cleaned them out and now that its happened again I can't figure out what's wrong.
OK, let's try a reset.
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
My iPhone's speakers don't work
My iPhone's speakers don't work when I play music or the sounds of apps, but if I get a call they work. What can I do?
Some people told me they can change my phone because it's a hardware problem, but I bought at USA, I live Peru. thanksThe iPhone includes a single speaker.
If no change after restoring the iPhone with iTunes - especially after restoring as a new iPhone or not from the backup, the iPhone has a hardware problem.
The iPhone includes a one year warranty and for an iPhone purchased in the U.S., the warranty will be honored in the U.S. only. -
My iPhone 5s has stopped playing music out of the speakers. It works when I plug in my headphones but other than that there's no sound. It just randomly happened so I'm not sure if I can fix it or if I need to bring my phone in. Help?
Hi Cassilecompte,
If you are not getting any sound from your iPhone’s speaker, you may want to troubleshoot using the steps in this article -
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for using Apple Support Communities.
Best,
Brett L -
My speakers are not working when I try to play music or when I get notifications buh when I go to sound and increase and decrease sound it works HELP
Clean iPhone charging port with a clean dry toothbrush. The iPhone port has a short, and falsely senses it is in a dock device.
-
microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.
Try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair. -
When my Mac goes to sleep, the speakers don't work
When my Mac goes to sleep, and i wake it up later, the speakers don't work AFTER it is woken up. You can't hear anything at all.
btw.... my serial number is [ Edited by Host ] .....if it helps.I don't think the post can be edited after 10 or 15 minutes, what madking can do is ask host to remove it from this forum.
In addition to my own post, here are the correct link.
try to reset PRAM and SMC to refresh your macbook hardware behaviour:
http://docs.info.apple.com/article.html?artnum=2238\
http://docs.info.apple.com/article.html?artnum=303319
Good Luck -
I don't hear when i call and when i receive calls
I don't hear when i call and when i receive calls. I already formatted my iphone but nothin changed... I hear and i'm heard with headphones and loudspeaker, that's all. Who can suggest me a way to get resolved this issue?
Sounds like there's a hardware issue with your mic and receiver(speaker used to hear people when in a call). If you've already restored the phone as new and you're still having the same problem, you need to look at repair/replacement options. If you are still under warranty(within 1 year of original purchase date) and there is no accidental damage to the phone, Apple will replace it at no cost. If you are outside your warranty then Apple will do an Out Of Warranty replacement, which will cost you $199 for another 4S.
-
Built-In Audio Output Speakers Don't Work
My Built-In speakers don't work on my Macbook Pro anymore.
I plugged headphones into the headphone jack last night when watching a film, now all of a sudden when I remove the headphones my built in speakers dont work.
When I try to turn up the volume I get the circle with a line through it telling me it can't be changed.
I went to system preferences and it says my speakers can't be configured and my Master volume track is un-highlighted so It can't be changed.
Whats going on?
Macbook Pro 15.4" 2ghz Mac OS X (10.4.8) 1GB, 100GB HD, 256MB Video, Final Cut Studio 5.1, Panasonic DVX100, 1TB EXT HDIs there a red light glowing inside the jack? It sounds like a faulty jack. Read this:
http://forums.macrumors.com/archive/index.php/t-232084.html
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
An Apple User Group -
External speakers don't work with Yosemite
I have just upgraded my iMac to Yosemite and now my external speakers don't work.
They are there to be used under System Preferences -> Sound as "Bose USB Audio"
But when I select them I get no sound and "The selected device has no output controls"
I do get sound if I select the Built-in Internal Speakers
The Bose speakers worked fine under Mavericks.
Can anyone help me get them working again ?Had similar issues with Bose Companion 5 after Yosemite installation. Tried most suggestions posted here without success.
But Birkers' post about plugging in/out analog headphones from Bose puck gave me an idea.
1. Removed Bose USB cable from iMac (Late 2014 Retina 5K / Yosemite 10.10)
- confirm that Bose disappears from Sound panel in System Preferences
2. Played music through internal speakers - OK
3. Played music through 2nd Display speaker - OK
4. Re-connected Bose USB cable to a different USB port
- confirm that Bose appears in Sound panel in System Preferences
5. - Bingo! Sound now playing trough Bose system -
Upgraded to yosemite now my speakers don't work and i can't play videos on Facebook.
When i play a video on face book I'm told i need to upgrade flashplayer, i wasn't even aware i had it downloaded! I have got rid of flash player (i think ) and now I'm told i need to download FP before i can watch videos. I can't play games on FB either and my speakers don't work.
I wish i hadn't upgraded to Yosemite to be honest as i prefer the old layout and it seems to have caused me problems. Everything was working fine before the Upgrade to Yosemite.
Im not good with computer terminology so please reply as simply as possible :-)
Thank youTry un-installing and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player
Adobe Flash Player updates available for OS X on October 24, 2014
Sound.
Sound – can’t hear sound from speaker - Yosemite
Sound – No Sound After Upgrade (2)
Sound Levels - Troubleshoot
Sound – Troubleshooting Internal Speakers -
External speakers don't work. They are LABTEC LCS 2420 speakers. The internal speakers with RealTek driver works fine. I have an HP Pavilion 23 touchsmart All-In-One PC with windows 8. I plugged the speakers in the headphone port then tried the audio jack in the back with the same resullt. When I right click on the sound icon and click on playback devices and riight click in the open area i checked show disabled and disconnected devices only the speakers realtek icon appears. Do I need to download other drivers and how should I do this?
Try the following: Control Panel > Hardware and Sound > Manage Audio Devices > in the 'Playback' tab you should see the ports (rear and headphone) > R-Click the one that you are using for your external speakers and make it the default device.
Trust this helps.
regards davida
"Although I am an HP employee, I am speaking for myself and not for HP" -
Hi I have an IPhone 5. Always before when I called someone...or they called and I had a pic set up for them in my contact list..... it would pop up the full size of the screen. I LOVED it! I could actually see it. Now...since the last update...or maybe the one b4 that.... The pic is just a little bubble that floats to the upper right hand corner. Does anyone know if there is a way I can get that full size pic back?
I'm sorry, there is no way to change that. It is a change with the newer iOS 7. You can provide feedback to Apple, like a large group of others have that are disappointed in this at www.apple.com/feedback and click on the appropriate link.
Maybe you are looking for
-
When I have a software update notification and I go to the 'Updates" tab of the App Store and click 'update', the flash screen 'Sign in to download from the App Store comes up the the Apple ID is wrong and grayed out so I can't change it. Where is
-
How many install can I do with one license of FCPX?
hi, if i have 3 MAC on my home, and i would use them, can I install and use at the same time?? Thanks Ruggero
-
Error in SQL Statement: SAPSQL_INVALID_TABLENAME /BI0/V0FIGL_C01F
Hi, When I am executing datasource 80FIGL_C01 using T.code RSA3 in BW3.5, getting error Error in SQL Statement: SAPSQL_INVALID_TABLENAME /BI0/V0FIGL_C01F I am getting same error when pulling data from BW3.5 to BI7.0 at scheduling. Can I have your val
-
Problems to load nicaiu.dll in VB 6.0
I would like to develope an aplication in VB 6.0 to acquire and load data from my USB-6210 card but I have a big problem. This card needs the nidaqmx software and i can't load the nicaiu.dll requested in this case. I must use the VB .Net o is another
-
Using External USB-based MIDI Interface as a synthesizer in QuickTime
The QuickTime 7 says it's possible. Any wonders?