Iphone speakers not working
Recently my iPhone speakers stopped working. I can listen through the headphone jack and can also put a phone call on speaker but for some reason I no longer can play music or other audio out of the small speakers in the unit. Any ideas?
The iPhone includes a single speaker.
If inserting and removing the earbuds several times in a row does not resolve it, and there is no debris in the earbuds port, more than likely you have a hardware issue that will require spending some money to fix or to purchase a replacement.
Two additional options for you to try is an iPhone reset and if no change, restoring your iPhone with iTunes.
Similar Messages
-
The Left speaker of my iPhone is not working.. Is there a way to*
The Left speaker of my iPhone is not working.. Is there a way to correct it... Actually if I connect iPhone to aux in of my car even then the left speakers of my car also won't work. Any suggestions?
There is no left speaker.
As the manual clearly shows there is only one speaker at the bottom of all iphones. The other is a mic. -
4s speakers not working..does not ring either
speakers not working on my 4s...should i go to verizon or the apple store?
Is the silent switch on?
Is the volume up?
Have you tried the basics? restart, reset, restore.
If you have tried all of the above then make an appointment at the local genius bar.
Verizon does not provide service for iphone. Apple does. -
IPhone 5s not working after voice over turned on
iPhone 5s not working after voice over turned on
Hello ss1997,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone will not boot past the Apple logo please follow the steps in the article below.
iOS: Not responding or does not turn on
Take care,
Alex H. -
Why will the front camera on my iphone 4 not work? On both the camera and snapchat.
Why will the front camera on my iphone 4 not work? On both my camera and snapchat
Hi there bananas321,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W. -
My iPhone will not work unless I plug it into my wall charger, It is fully charged but only works when it is plugged in to wall charger. When it is turned on it say "Restore needed iphone can not make or receive calls' i tried plugging it up to Itunes but it will not turn on to sync.
First try a hard reset, press and hold the power button and home buttons until the phone restarts and displays the Apple Logo, then let go.
If that doesn't work...
Try forcing recovery mode and then restore with iTunes.
HT1808 iOS: Unable to update or restore
http://support.apple.com/kb/HT1808 -
I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?
I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue. -
My iPhone will not work in landscape mode anymore, how do i get to work again
my iPhone will not work in landscape mode anymore, how do i get to work again??
Double click round home button then slide icon on the bottom of screen to so you go all the way to left. There you will see a square icon with a circle arrow . That is the screen rotation control button. Tap on that to lock/unlock screen rotatio
-
I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!
You should probalby contact Netgear
-
Internal speakers not working after upgrading to Maverics
internal speakers not working after upgrading to Maverics
There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store. -
After updating my iphone 6 to ios 8.0.2, the iphone is not working at all!!
after updating my iphone 6 to ios 8.0.2, the iphone is not working at all!! the apple logo shows up for a few seconds. then the screen goes red !! after it restarts and it do the same!! please help.
Well, just for future reference, any time you do an iOS upgrade, it is a good idea to back up your device just prior to doing the download. You can back it up to iCloud or to iTunes. Personally, I prefer to back it up to iTunes, and then to do the download via iTunes as well. Doing a Wifi download can, by the very nature of the OTA environment, run into more issues than a hard-wired one via iTunes.
If it is just a version release (like 8.0.1, or 8.0.2), then I might download it via Wifi, since the content is not likely to be very large. But for any major new release (7 to 8, etc.) it is always a good idea to do it via the USB cable rather than OTA.
I would also suggest that you set up your device to do automatic iCloud backups. Whenever it is turned on (i.e., not manually powered off - it can be "asleep"), plugged into a power source, and connected to Wifi, it will do an automatic backup every 24 hours. Mine usually backs up at night.
But even with my iCloud backup in reserve, I still did an iTunes backup before I upgraded to iOS 8. I like having the extra security of that second backup to choose from, should I need it. Here is a support article comparing the two types of backup:
Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
Sorry you lost your stuff. Hope then next update goes better for you!
Best of luck,
GB -
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply -
Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopelessIf you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.
-
My iphone 6plus not working not charge but when i run it the first time working half an hour when you attempt to run it again light up thr screen and showws the apple logo and after the pice screen illuminates red and does not work what do i do now
Hello Nadersalah,
It seems you're experiencing multiple issue with your iPhone. Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
iPhone Repair and Service - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
have downloaded OS6, iphone now not working. Won't activate and iTunes is saying no sim card. what do i do next?
sounds like your phone was hacked to work with your carrier. Now it is relocked to the rightful carrier. It cannot be reactivated without a SIM from that carrier.
Maybe you are looking for
-
oracle error is ORA-12541:TNS: no listener in my persional computer i think some peple are change my IP address how can i solve this problem .Plz help me soo .. Wating you reply Suman Message was edited by: user586129
-
Data missing in Crosstab report with calculated field via case when
I use the Oracle 10g discoverer. When I create a crosstab report with a calculate field via function case when and put it as datapoint, some of the data is not showing. I tried to not use the case when function for the calculate field, then all the d
-
Sharing calendar with others via icloud
I just can't seem to get my calendar to get into my icloud account let alone share it with other members of my family, any suggestions?
-
Linking pdf form to an access database
Hi. Fairly new user here. I was wondering if anyone tell me how to get a pdf form to deposit the entered data (from the form fields) into an existing access database. Both the forms and the db exist on the same server. What kind of link do i require?
-
I have a iPhone 4s and it has a black screen every second a blueish whitish light flickers right down the middle of my screen and I can't fix it can someone please help me out?