IPhone stuck at updating (loading) screen after ios7 update

I updated my iphone 4s to ios7 and itunes said it was succesfully updated and it would reboot but it's been on the updating/loading screen (apple logo with loading bar) for the past 20 minutes not moving at all...is it safe to unplug and try to reboot or should i just let it sit there for a while longer?

You should post questions about iOS7 beta to developer forums at http://developer.apple.com

Similar Messages

  • Windows 8.1 store stuck in the loading screen after update 1. pls help me!!

    I also tried to re-register the store but still its stuck in the loading screen ! pls someone help me!!. its not working after the update 1. I can't download any apps

    Hi,
    How did you re-register store? Is there any error message when you couldn't open Store?
    To resolve store opening problem, firstly, you can try to use WSRESET command to clear store cache for test.
    Secondly, try to use APP Troubleshooter to fix this problem.
    APP troubleshooter:
    http://go.microsoft.com/fwlink/p/?LinkId=268423
    Roger Lu
    TechNet Community Support

  • HT3964 My iMac gets stuck on blue loading screen after it starts up.. Reset smc and pram?

    My 2009 iMac on OS X leapard will start up but gets stuck on the blue loading screen. Ive been instructed to reset the smc and pram but can't figure it out nor find it online in a simple way. Can someone please assist? Again: it fires up but gets stuck on blue loading screen..Thank you!

    Reset SMC:
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Reset PRAM:
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Macbkpro got stuck on the loading screen after upgrading

    I updated my macbkpro to yosemite
    It restarted and I login as usual and can see the new os
    But then it broke down and I reboot it and it just got stuck on the page with an Apple logo and a loading bar. It loads until like one fifth of the bar and stops and doesnt proceed to the login page.
    I keep rebooting and waiting but it just doesnt move a bit anymore.
    What can I do now

    @hei320 I had the exact same issue as you.
    Resetting the PRAM worked for me.
    https://www.google.com/search?q=reset+the+PRAM&oq=reset+the+PRAM&aqs=chrome..69i 57&sourceid=chrome&es_sm=93&ie=UTF-8

  • IPOD stuck on loading screen after ios6 update!!

    My ipod is stuck on the loading screen after updating to io6, when connected to the computer it is saying updated, but it stuck and remains on the update loading screen.

    If not successful try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • IPod Touch is stuck on loading screen after slide to unlock. HELP!

    So, my iPod touch 4G is stuck on the loading screen after i unlock it. Just wondering if anyone is having the same problem. Just had my iTouch in less than a week! Help please! thank you

    - First try a reset. Nothing is lost:
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next connect to computer and restore if you can.
    - If the loading screen still shows, let the batter fully drain. After charging for an hour try the above again.

  • My phone lagged while trying to download the new update. It is now stuck on the loading screen that is black with the white apple. How do I fix this?

    My phone lagged while trying to download the new update. It is now stuck on the loading screen that is black with the white apple. How do I fix this?

    Reset the device by pressing and holding the home and power buttons for about 15-20 seconds.

  • My phone iPhone 5c is stuck on the loading screen when you boot up, what can i do to fix it?

    My iPhone 5c is stuck on the loading screen when you boot up, what can i do to fix it?

    Try a reset.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.

  • My iPhone 4S is stuck on the loading screen

    My iphone 4s is stuck on the loading screen and when I let the batt die all the way and turn it back on the loading screen appears again. Plus I don't have insurance so what should I do!!!

    Do a DFU.
    http://theiphonewiki.com/wiki/DFU_Mode

  • HT201210 When I updated to ios6 my phone is stuck on the loading screen. I've turned it off but nothing is working.

    When I updated to ios6 my phone is stuck on the loading screen. I've turned it off but nothing is working.

    Loading screen is that the Apple Logo?
    Try a hard reset, Press and hold the Power and Home buttons until you see the Apple Logo.
    If that doesn't work, force the phone into recovery mode and restore using iTunes:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808

  • My iphone is stuck on the loading screen... Any help?

    My iphone is stuck on the loading screen... Any help?

    Try resetting by holding the home button and sleep/wake button until it turns off ignoring the slide to power down. You probably won't see that if yours is stuck.

  • Phone gets stuck most of the time after ios7 update

    phone gets stuck most of the time after ios7 update

    Hey Siddh.s!
    Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Why is my iPod stuck on a loading screen?

    I shut down my iPod and when I turned it back on it got stuck on the loading screen and its been like that for a couple hours and it won't do anything. I've tried plugging it in and pressing the power and home buttons but it just keeps loading. I'm really scared does someone know what to do?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My Ipod touch 4th generation is stuck on the loading screen from when i turned it on and it is not changing

    My Ipod touch 4th generation is stuck on the loading screen from when i turned it on and it is not changing plz help

    - Try resetting the iPod.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next connect the iPod to its syncing computer and restore the iPod via iTunes
    - If iTunes does not see the iPod try placing the iPod in recovery mode to see if it will make it visible so yu can restore the iPod.  For recovery modes see:
    iPhone and iPod touch: Unable to update or restore

  • My White Macbook is stuck at the loading screen, and disk utility, safe mode doesn't work either. What should I do?

    I went on vacation a few days ago and in El Salvador, they have this mobile broadband sticks. Well, I was using one until it gave me a network error. After that, it shut down my computer entirely. The first time it happened, I didn't think much of it. I took the battery out and put it back in for it could work. It happened another two times, and after the third time, my MacBook stays stuck at the loading screen, and it will take 5-10 minutes on that screen, before it shuts down, or it wouldn't turn on at all. I've tried booting into safe mode, but it appears to not boot into it. I've tried resetting the Pram, and using disk utility, but that still won't work. I don't know what else to do to make it boot into  OS X  Lion.
    I'm an AP student, and the majority of my work is in that computer, and it is very important! What can I do? Not only that, but I enter school in a few weeks and I need the AP work by the time I enter.
    What can I do? Can someone help?
    Thanks

    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Maybe you are looking for

  • Issues with MS-7211 (PM8M3-V) and the JPW1 connector

    Hi all, I have been recently getting problems with booting up my computer.  The Windows flash logo will stall and boot will not continue.  Also, at times the boot-up gets stuck in a "loop" where the system will just cycle through boot-up over and ove

  • C3180 is printing 2345x in top left corner of blank pages every time i print

    Every time I print anything from my Mac Book Pro (running Mavericks 10.9), my C3180 spits out a page with 2345x printed in the top left corner of an otherwise blank page.  Wasting my paper and my ink.   Anyone have any suggestions? This question was

  • Submit button - help

    Hello all, I have a jsp page which has a few input text fields and a Submit button. When I enter data into these fields and click on Submit, these data get inserted into the a database table. I generate a password every time I click on the submit but

  • 8.2 to 8.3 static nat question

    So, in 8.2 If I had an inside interface at 10.10.10.1 and an mpls interface (sec-100) at 10.20.20.1, and I wanted traffic to traverse between the two to interfaces, I could write the following statement: static (inside,mpls) 10.10.10.0 10.10.10.0 net

  • Cannot Type Some Arabic  Characters

    Dear All, I am working in bilingual project English and Arabic. In 10gforms i can type arabic and save it properly but in 10g reports i cannot type some of the arabic characters in design view. but the same characters i can type in arabic using other