IPhone stuck in connect to iTunes mode after restore

I attempted to jailbreak my original iPhone with software 3.1.3 using Spirit. This process failed, and I decided to restore it. After the restore was installed, the phone rebooted, and attempted to access the iTunes Store. However, it cannot reach the store, and I get a window saying error -9813 occurred. My phone is stuck in the emergency call mode now, and any help would be much appreciated! I am running iTunes 8.2.1 on Mac OS X 10.5.4 (outdated, I know, though if I must upgrade iTunes/the OS itself in order to get my phone to work again, I will). Thanks
Edit: also, I can log in to my iTunes account and browse the iTunes store itself without any problem. The issue is that I can't access the iPhone activation screen.
Message was edited by: DP154

Never mind, the problem seemed to resolve itself. I guess the issue here was on Apple's/AT&T's end and not mine, which I was concerned was the case. The phone successfully connected to the iPhone server, and then proceeded to copy data from a previous backup of mine.

Similar Messages

  • My iPad 2 is stuck in connect to iTunes mode after the update. It won't restart when I hold both buttons down.

    My ipad2 is stuck on connect to iTunes  screen and won't reset. I had just downloaded the os update. How do I get it back?

    The iTunes icon and cable mean that it's gone into recovery mode : http://support.apple.com/kb/ht1808
    You will need to connect the iPad to your computer's iTunes and you should be able to use it to reset the iPad, and you can then restore/resync your content to it.

  • HT1386 iphone stuck on connect to itunes mode

    my iphone4 is stuck on connect ti itunes and cant reset.. any suggestions?

    Connect to iTunes on the computer you usually Sync with and Restore...
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • IPhone 4 stuck in "connect to iTunes" mode after iOs5 update. Help!

    Here's what's happened:
    I wanted to upgrade to iOs5 on my iPhone 4, so I booted up iTunes.
    - I have added a couple new songs to my iTunes and haven't synced them in a while (probably not relevant)
    - I downloaded iTunes 10.5 and then iOs5
    - iTunes then said something about loss of stuff when restoring (but it doesn't matter that much)
    - it took ages to install iOs5 onto my iphone and sync
    - once it had done that I disconnected my iphone
    - It now is in recovery mode (the "connect to iTunes" screen)
    - I try connecting it to my PC again (Windows 7) and iTunes doesn't register anything there at all.
    Please help!
    -MrGeorge343

    I have had this same problem and am still struggling.  I have restared computer and am doing a full restore of Iphone4 from Itunes backup
    I hope this works.  Has taken 4 hours so far

  • IPhone stuck in 'connect to iTunes mode' and can't restore via iTunes!!!

    IInstalled new update last night. Then crashed and won't turn on, says connect to iTunes. I have tried to update and restore about 20 times but every time it says halfway through 'the iPhone could not be restored. An unknown error occurred (3) I have done a hard reset about 30 times on the phone tried updating via computer, doesn't let me do that. Doesn't let me restore. I've turned computer on/off reinstalled iTunes. Reinstalled the new software of 8.1.3 or whatever. And now I stand to lose everything!!! What more can I do!! I'm in UAE. And there's no official Apple shops!! I'm soo annoyed and spent hours trying to fix it, I have had every single iPhone and am very competent in the use of them.. Right now I'm on my iPhone 6+ which has the update and it was fine.. Please someone help me, if possible!!

    yes, just to say a big thank you to Apple ...realizing today while browsing these forums that I haven't been the only one. Happened to me when I updated from 8.1.2 to 8.1.3 OTA... device (iPhone 4s) stuck in recovery mode ... how nice, this has never ever happened to me after years of using iOS, whether I updated OTA or via iTunes, never. I was then delighted to experience the restore process ... wasted hours doing that thanks again ! (I have many apps and a big backup so...). Seriously, this is unacceptable.

  • Re started iphone after powering down, now is stuck in connect to itunes mode and wont do anything else. also has no service

    re started iphone after powering down, now is stuck in connect to itunes mode and wont do anything else. also has no service, I was able to retrieve all of my photos so the device is functional on that level. have restarted several times & also have restored data from i tunes. it said my phone is damaged.

    Jailbreaking
    Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
      Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

  • Cannot install IPhone 4 USB Driver, Phone stuck in "Connect to iTunes" mode

    Hi.
    I have the new Iphone 4 - for 2 days, and i can't install the Iphone 4 USB drivers. I tested the cable, the OS.. everything and now after reset i can't use my phone since its stuck in connect to Itunes mode.
    Every time i try to connect the USB, Windows recognize it as "unknown device" with (Code 43). If i try manually to select the Driver from common/apple/drivers the error is (Code 10).
    Tested the 2G and seems its connected without any problem and windows recognized the phone, but its not recognizing my Iphone 4 (tested on 2- Windows 7 OS), found some topic that Reset can help such issues, and now im stuck with Phone that have only emergency calls.
    Using latest iTunes , and ver 4.0.2
    Please help!!!!

    Same problem. This worked for me
    http://www.youtube.com/watch?v=nQnb4wIxNFg&feature=fvwrel

  • My iPhone 4 is stuck on connect to iTunes  mode!!!!!! Plzzzzz sm help me. What should i do??  I am from albania and i have gone to any apple service here but no help

    my iphone is stuck on connect to itunes mode!!!!! Plzz smb help me!!! What should i do? I am from albania and i have gone to any apple service here but no help!!!!

    Hi enkifromtirane,
    If you had an issue with your iPhone and are now seeing an icon screen instructing you to connect to iTunes, you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • Iphone 4 stuck in "connect to itunes" mode

    my iphone 4 stuck in "connect to itunes" mode
    i've tried to reset but it keeps getting back like this.
    can anyone help me?

    Same problem. This worked for me
    http://www.youtube.com/watch?v=nQnb4wIxNFg&feature=fvwrel

  • I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen .  tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?

    I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen .  tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?

    Dont know if accidently fixed it or not i got it to be recogniced by itune im restoring it now.  i held the power/sleep button till turned off.  then while holding the home button under the screen connected it to the usb wire .. also i change the usb port i was using on my computer dont know if it was luck or what but glad i got my phone back.
    itunes recognized it as in recovery mode
    http://support.apple.com/kb/HT1808
    got it working currently restoring from backup good luck guys

  • Ipad 2 stuck in connect to itunes mode

    My ipad 2 was updating to 5.1.1, is stuck in connect to itunes mode and cant be restarted nor switched off and itunes is not able to recognize my device.. it has been like this for the past hour!!! i even updated to the latest itunes to try to make my ipad 2 work... Can anyone help please??

    Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    Secondly, try all the other ports on your computer, even a number of times.
    Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs

  • Tried to upgrade my iPhone 4 to 5.1 and now it is  stuck in "plug into itunes mode" after trying to update to iOs 5.1 and receiving error (1).

    Tried to upgrade my iPhone 4 to 5.1 and now it is  stuck in "plug into itunes mode" but will not recover when I plug it in. It is coming up as "unkown error (1)". Is there anything I can do?
    Also, is there any way to recover pictures I have not yet backed up? They should be on iTunes, but do not show up when I plug the phone in or otherwise.
    Is there any hope in saving this phone or is my best bet contacting Verizon or Apple to overnight me a new one?

    From iPhoneWiki:
    Try changing the USB port (the back one of chassis is better) and restart computer.
    The installed version of iTunes may also be too old. Update iTunes.
    Also put your iPhone in DFU mode when doing the above and restore. It's a software error.

  • Iphone 5 is stuck at connect to itunes screen after the last software update

    The last thing which I did on my phone is software Update and left it at night .Today Morning I saw my IPhone 5 is stuck at connect to iTunes screen
    I  tried connecting to iTunes with my laptop and clicked on restore and update still it is at same screen
    Rebooted the device still same screen
    Please let me know if you are aware of this fix

    Hi vadlapavanigeetha,
    Welcome to Apple Support Communities.
    Did you see an alert window when you attempted to update your iPhone? The suggestions in the article linked below will resolve most update and restore issues.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers!
    -Jason

  • Phone stuck on connect to itunes screen after update attempt

    Hi, hope someone can help me. I connected my iPhone to my computer to transfer my photos from the phone to the PC. I have automatic syncing turned off.
    When I connected, I was prompted to update the iTunes version, which I did. It's now version 9. Then I attempted to update the iPhone version. I got a message saying I had to transfer my purchases first, which I did. Then I tried the update again. The update seemed to take awhile, then I got a message saying it failed. There was a "More Information" button which just prompted me to send info to Apple, which I did. Unfortunately I didn't save the info.
    At that point all my iPhone info no longer showed in iTunes, and the only active option is Restore. It does say "Your iPhone software is up to date," which would seem to indicate that the update did work...I tried disconnecting and reconnecting my phone. When I do this, I get the message "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    I would rather not Restore the phone unless I have no other options, since I have 600 pics, contacts, etc on the phone...Of course not backed up since this is the first time I've tried to transfer data.
    So I tried a few things:
    - I disconnected and reconnected the phone several times.
    - I restarted the computer several times.
    - I went to the Apple site and tried the troubleshooting steps for "stuck on connect to itunes screen" (which is what my phone is currently doing).
    - I ran the diagnostic checks in iTunes (output below - I ran this while the phone was plugged in yet it says it's not found).
    - I held down the Home and the Sleep/Wake button until I see the Apple icon.
    - I went to My Computer > Manage and tried to update drivers, but the phone doesn't show in the device manager.
    - I tried a different USB port and there are no other devices connected to the machine.
    Nothing worked, my phone is stuck on the connect to iTunes screen and I get the error message every time I plug it in. I haven't tried another computer bc I don't have one and I'm not sure how to create/use another user account on this machine.
    I wouldn't mind calling support but my phone doesn't work...Any help is much appreciated. Thanks in advance.
    ============
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    ASUSTeK Computer INC. 1005HA
    iTunes 9.1.0.79
    QuickTime 7.6.6
    FairPlay 1.7.16
    Apple Application Support 1.2.1
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.0.0.102
    Apple Mobile Device Driver 1.46.0.0
    Bonjour 2.0.0.34 (214.3)
    Current user is an administrator.
    The current local date and time is 2010-03-31 02:42:39.
    iTunes is not running in safe mode.
    Video Display Information
    Mobile Intel(R) 945 Express Chipset Family
    Mobile Intel(R) 945 Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2010-03-31 02:22:42.
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.1.0.79 is currently running.
    iTunesHelper 9.1.0.79 is currently running.
    Apple Mobile Device service 3.0.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    Fifth Generation iPod (iPod with video) running firmware version 1.3
    iPhone 3G running firmware version 3.0
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.
    Message was edited by: gobblygook
    Message was edited by: gobblygook

    Your only choice at this point is to restore your iphone. Since it appears from your post that you have never synced to this computer, you of course will not have a backup to restore from. That means your only choice is to restore as a new device & re-sync your itunes content. Unfortunately, all of your contacts, calendars, pics in your camera roll, etc., will be lost. Its not a good idea to use the iphone or any phone for that matter as a storage device, as things like this can & do happen. You should be syncing on a regular basis. The first thing done when you do sync is an iphone backup. You should also transfer pics in your camera roll to a supported application on your computer on a regular basis, much like any digital camera. You can always sync pics back to your phone, but if the only copies are on the phone, you run the risk of losing them.
    See if you can force the phone into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • IPad stuck on "Connect to iTunes" screen after iOS 8.0.2 Update

    Attempted to update to iOS 8.0.2 last night on my 4th Gen iPad. After verifying the download, the iPad instructed me to "Connect to iTunes". Once connected, iTunes stated that my iPad was in need of a restore, which I attempted to do so. Upon "extracting software" iTunes states that it cannot recognize my device and fails the restore. My iPad is still stuck on "Connect to iTunes" screen.
    So far I've:
    Attempted restore on iTunes 3 times
    Attempted hard restart (reboot) by holding home button and top button down for ten seconds.
    Don't know what else to do, Please Help!!!!

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

Maybe you are looking for

  • Windows won't detect my iphone 4

    I have trouble to conect my iphone 4 with my computer or with itunes. usb ports are ok, and data cable is ok. When i plug the phone into the comp. it only charge the batery. pls help

  • How can I only restore contacts to my iphone

    I only want my contacts after I restore my iphone. Can anybody help. And when I backup from itunes then it gives  two option backup app and do not backup apps so  when I use do not backup apps then will it restore all the apps that I has before the r

  • How to monitor RFC to JDBC scenario?

    How to monitor RFC to JDBC scenario Hello, I have update_insert scenario from RFC to Oracle database. In TOC SXMB_MONI I have black and white flag. In RWB I found for this scenario only successful status. But in the database I found only 2 records fr

  • Need Urgent Help plz

    Actually i have problem that i dont know how to parse an xml file. Is there any class method in which the xml file name is passed as an argument. then if i want to modify any node's attribute value in the xml then i can be done. i have stdudied JDOM

  • Intel Xeon Windows 64 Bit : Which Oracle software Version?

    Hi! we have Windows Enterprise Server SP2 <b>64 bit</b> with <b>Intel Xeon</b> processor and would like to install the SOLMAN with Oracle. According to the original Oracle-DVD from SAP there are only three possible choise entries: a) AMD64 b) IA64 c)