IPhone stuck on home screen and wont sync

Im working on a 3gs... its was working fine then it started vibrating like it was ringing. But not no one was calling, it still keeps vibrateing or beeping (depending if im on vibrate or ring) it also unresponsive on the home screen (the one that you do the slide thing) and when i plug it in.... it wont connect to itunes but it will charge? Ive tried to do a hard resest and it starts over and doest the same thing. I also tried to hook it up to my computer and do the hard reset to see if it would connect when its rebooting

The servers are getting slammed. Bunch of people trying to download iOS7 at the same time.
There is a chance activation servers might be down/slow for now. Just keep trying throughout the day.

Similar Messages

  • Iphone stuck on activation screen and wont detect in itunes

    My iphone is stuck on the activation and screen and it doesnt appear in itunes... any solutions?

    The servers are getting slammed. Bunch of people trying to download iOS7 at the same time.
    There is a chance activation servers might be down/slow for now. Just keep trying throughout the day.

  • Iphone stuck with apple symbol and wont start up

    i updated my iphone and when it finished and went to reboot it just stays stuck on the apple symbol it constantly reboots and will never connect to my laptop i dont know what to do if anyone can help please do

    Hi,
    Luca224 & Ingo2711. Thanks for bringing this topic. on 29th Nov. I faced the same problem on my iPhone 3GS 32GB Firmware 3.1.2, iPhone stuck with apple symbol and wont start up. I have tried with 10 Seconds Sleep/wake-up button + home button to reset. But didn't work. Did google about an hour with many blogs. Finally I made a call to 3 iPhone care and spent 30 minutes and explained whatever I have done; iPhone customer care asked me to go to nearby iPhone service center in Sydney. BUT BY LUCK CLICKED ON iTUNE AND GOT THE OPTION FOR ONLINE FORUM FOR APPLE iPHONE. Many many thanks to Ingo2711 who has given the solution link and also thanks to Luca224 , who raised the issue. I feel, this is a common problem with iPhones those who using iPhone 3GS 3.1.2...... but try the link http://support.apple.com/kb/HT1808 and thanks to Luca224 & Ingo2711. PLEASE FOLLOW THE INSTRUCTION CAREFULY:
    1. Verify you have iTunes 7.5 or later. Apple recommends using the latest version of iTunes.
    2. Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
    3. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off. _+(in my case - red slider didn't appear, but i pressed the Sleep/Wake button until the iPhone went off, finally it was just off... i was frustrated... tried 3 times with more patience )+_
    4. Press and hold the Home button while reconnecting the USB cable to iPhone. When you reconnect the USB to iPhone, the device should then power on. +_( Do exactly as it says)_+
    Note: If you see the message "Charging... Please Wait" or you see the screen pictured below, let the device charge for at least 10 minutes to ensure the battery has some charge and then start with step 2 again. +_(True ... for me it happened 3 times)_+
    5. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. +_( I was nearly frustrated at my 3rd attempet; my thumb was hurting as I was holding the home button for few minutes..... but finally it worked yahooooooooooooooooo...... suddenly changed my decision.... about going to 3/Apple service center)_+
    6. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
    If you don't see the "Connect to iTunes" screen, then disconnect the USB cable from iPhone and repeat steps 3-6.
    Because you must restore iPhone or iPod touch, iTunes will not recover data from the device, but if it was previously synced on the same computer and the same user account, it should restore a backup (if available). See document HT1414, "Updating and Restoring iPhone Software."
    If you are still unable to restore the iPhone using this method, check Apple support for further troubleshooting and/or service options.
    Note: If you sync both an iPhone and an iPod touch to the same computer, make sure you select the correct backup to restore your settings from (don't select an iPhone backup if you have an iPod touch and don't select an iPod touch backup if you have an iPhone).
    **** ( BACKUP FROM YOUR iTUNES : MAC/PC; AS I GOT MY 95% DATA FROM THERE.... GOOD LUCK)******* IF IT WORKS PLEASE POST YOUR EXPERIENCE....*
    THANKS

  • I downloaded ios5 an error message 3002 came up now my iphone stuck on loading screen and itunes doesnt recognize my iphone.

    i downloaded ios5 an error message 3002 came up now my iphone stuck on loading screen and itunes doesnt recognize my iphone.
    now my iphone has a blank screen for a couple seconds the loading screen appears then apple re appears.
    A REPEATING CYCLE now i have No PHONE!!!! Help ME PLEASEEEEEEEEEEEEEE

    Try it...
    Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    i´ve done it and worked 100%
    Good lucky

  • Iphone stuck on rebooting screen and wil not let me restore

    my iphone is stuck on reboot screen and will not let me restore

    http://support.apple.com/kb/HT1808

  • IPad mini is stuck between home screen and multitasking

    So my iPad got stuck between the home screen and the last app i had open when i was trying to get it to multitask. I've tried to hold down the sleep/wake button and home button and it just takes a screen shot, even when i hold it for 20+ seconds. Or, it'll go to siri and when i tell siri to open any given app, she tells me she wasn't able to. I am so frustrated its been like this for almost an hour now. Any help would be greatly appreciated

    Hold the Sleep/Wake and Home button down (together at the same time) until you see the Apple Logo.

  • My iphone 4 is locked up and wont sync to itunes what do i do, my iphone 4 is locked up and wont sync to itunes what do i do

    my iphone 4 is locked up and cant remember my passcode and it wont sync to itunes how would i restore it and my lock button dont work

    power down your phone and unplug from your computer
    hold down the home button then plugin and wait till you get a message about an iphone in recovery mode
    follow the instructions on screen to restore your phone
    (this will wipe out your phone but it is the only option other than remembering your passcode)
    in the setup screen after its restored you can restore information from icloud or a backup given you have one

  • IPod 5th Gen Stuck On Charging Screen And Wont Turn Back On

    So my ipod was fully charged and then just randomly shut off... I plug it back in and it goes to that charging screen it goes to when it actually dies on you.. its been stuck like that for over 3 hours and wont turn back on... I cant hold  my home button and power button down cause a few months  ago my home button spring broke... so thats not an option... and my ipod wont register to my computer for me to restore it.. can somebody please help me?

    Try:
    - iOS: Not responding or does not turn on
    When it says place the iPod in recovery mode use one of these programs to place the iPod in recovery mode
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HELP!!! iPod is stuck on black screen and wont work!!!

    I've had my nano for 2 years and it's gotten locked up and I pressed buttons until it worked, but never like this! For the past 3 days my ipod has been stuck on a black screen, and I made sure it wasn't on hold. I've been plugging it into EVERYTHING!! My iHome, my wall plug-in, and my computer but it never works! When I plugged it into my computer, it didn't even detect an ipod plugged in! After that I hit random buttons for half and hour. So, before I throw it out the window in a fit of rage, any advice?!

    Have you tried pressing the menu button and the center button at the same time?
    If you hold them down for about ten or so seconds the gray apple will appear and things will start working again..
    The same thing happened to me today Lucky me I work with an I pod Crew and they helped get it running

  • IPhone 5 stuck on home screen and there are codes at the top??

    So I plugged the phone in and it started charging like it should. When it had enough juice the Apple logo flashed and it should'be pushed me to the main screen of my iPhone. Instead it stayed on the start up screen with the apple logo and there are codes at the top of the screen that start with [nand]. There are about 10 rows of it. What should I do?

    This error is hardware related and you should get the phone serviced by visiting an Apple Store or an Authorized Apple Service Provider.
    iPhone - Contact Support - Apple Support

  • My iphone has a black screen and wont turn on, but still has vibrations. How can I fix it?

    My iphone wont turn on but still has functions, how do I fix it?

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
    If this does not work, try to connect in recovery mode, explained here:
    iOS: Unable to update or restore

  • My iPod 3rd gen is stuck in recovery mode and wont sync, Error 9 and 1611

    I have tried using a different computer, 3 different USB cables, uninstalling everything apple and installing itunes back. But nothing works, i come up with an  error 9 almost 90% of the the time, and the other 10% is an error 1611. i have had this ipod since 2 years and nothing happened untill now, please help

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    The "the device may need service" means a hardware problem which is likely your case. Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years) and the screens has gone black and wont turn on.  Phone is charged. We have tried force quit- home screen and top button. help pls

    We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years). The screen has gone black and wont turn on.  Phone was charged. I have tried force quit- home screen and top button. iTunes is not recognizing phone when I plug into computer.  help pls

    FIRST charge with an Apple charger for at least 15 minutes. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. Hold for up to 30 seconds. If nothing happens the phone hardware has failed.

  • Iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?

    iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?
    the iphone 4S has been in recovery mode for a long time and i have tried to press and hold the power and home buttons until the apple symbols comes on the screen again but it stay on the screen until the screen turns off and doesn't come back on to the home screen and have tried to sync with mac and doesn't do anything it does display the itunes and cable icons for a while but then goes back to the apple symbol and doers nothing what can I do to fix this  and not loose what is on the phone at all?

    Hi, simonRM.  
    Thank you for visiting Apple Support Communities. 
    I understand that you are unable to restore your iPhone.  Here are the best troubleshooting resources to start with when not being able to update or restore your iPhone.
    If you can't update or restore your iPhone, iPad, or iPod touch
    Resolve iOS update and restore errors in iTunes
    -Jason H.  

  • My I phone 4s wont start correctly. I turned on audio reader and it just gets stuck on lovk screen and i cant enter my phone

    I starrteaudio reader and mi phone wont start it just gets stuck on lock screen and is slow

    Hey tessatony,
    Thanks for the question. I understand that your iPhone 4s is not functioning properly, and that you wish to try to make a backup before troubleshooting. From the information you have provided, it sounds like the device is indeed turning on and responding when plugged in, however the display is not lighting up. Have you attempted to plug the iPhone into a computer with iTunes? If iTunes recognizes the phone, you can attempt to back it up:
    iTunes: About iOS backups
    http://support.apple.com/kb/ht4946
    Afterwards, attempt to restart and/or reset the phone:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If your issue persists, your iPhone may need to be serviced. The following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
    Apple - Support - Service Answer Center
    http://www.apple.com/support/iphone/service/faq/
    Thanks,
    Matt M.

Maybe you are looking for

  • Scrolling Marquee created in Flash 5.5 Pro not working in CP5.5

    Hi all. I've created a scrolling marquee .swf within Flash 5.5 Pro which has the dimensions of 30x205. This works perfectly both testing the scene in Flash as well as when you view the .swf on it's own. However, when I import the .swf into Captivate

  • 2008 Pro has flashes of black bar at bottom of screen

    I'm getting flash of a black bar the full width of screen and height of dock at the very bottom of the screen. It flashes quickly twice about every 10 seconds. I just got the box last night. It has an 8800GT card. Didn't notice it last night, but lef

  • Tables used in the system function call

    Hi expert, I want to find out which are the tables used to extract data using system function call on SAP 3.1h system. here is my specification. I am using "AUTH_FIELD_GET_INFO" function module to get describtion of attribute say for example import p

  • Urgent help in B2B Encoding

    I got stuck in critical production issues, I have few outbound interfaces in B2B which are required to write file in UTF-8 encoding, and having few inbound interfaces where file is containing polish character. If I change b2b.encoding to ISO-8859-2,

  • Forefront Password Registration

    Hello, Is there any possibilities that user can make registration from internet for their forefront password registration without including domain name ? for e.g instead of domain\username I want only username or domain name include automatically so