IPhone stuck on NOT silent
I dropped my iPhone 4 today and since then I have been unable to turn my phone onto silent mode. It is now really annoying as whenever I get a message or type or whatever it always makes the noises. Toggling the switch does nothing. Please advice how I can fix this issue. Thanks!
You broke your phone. Bring it to Apple for replacement or buy a new phone. That's how you fix the issue.
Similar Messages
-
IPhone stuck and not restoring
My iPhone 4S started acting funny yesterday. It showed only 'searching' instead of cellular network. Tried resetting network and resetting phone at the risk of losing data but no help. Then tried to restore the same through iTunes but after installing it got stuck at "Verifying iPhone firmware" and iTunes shows "iphone could not be restored an unknown error occurred (1)" after which it goes to the mode where it shows me to connect to iTunes. Try doing through DFU mode but it gets stuck at the same point every time. Tried TinyUmbrella, BootRec, Snowbreeze as well. But no help. One thing I noticed before I tried restoring was that I was not getting any thing in IMEI or Modem Firmware filed of the Settings>General>About section.
Any help on this?Welcome to the Apple Community.
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream. -
my camera on my iPhone 5 is not working it's stuck on the shutter screen what can I do please help!!!!
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
HT4623 my iphone 3gs will not activate says the server is down and stuck on that screen
my iphone 3gs will not activate says server is down and it is now stuck on that screen
You look somewhere else for an answer or you buy a new phone.
Hacked / jailbroken phones can not be discussed here per the TOS. -
my Iphone 4 will not restore stuck on apple logo I get it to connect to itunes but same thing happens says it is restoring but freezes at apple logo.
Hi there kalebfromcolorado springs,
You may find the troubleshooting steps in the article below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
-Griff W. -
I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen . tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?
Dont know if accidently fixed it or not i got it to be recogniced by itune im restoring it now. i held the power/sleep button till turned off. then while holding the home button under the screen connected it to the usb wire .. also i change the usb port i was using on my computer dont know if it was luck or what but glad i got my phone back.
itunes recognized it as in recovery mode
http://support.apple.com/kb/HT1808
got it working currently restoring from backup good luck guys -
Iphone 4 will not complete sync, stuck on last step
Updated iPhone to iOS 5.1 the other day, now iPhone 4 will not complete the sync cycle. It gets stuck on step 7 of 7, waiting for artwork to sync. I am running this on a Windows-based machine, and while I have synced daily in the past, I have NOT synced my contacts list and the like. I do NOT want to Restore my phone at this point; I'd like to see if there's a fix out there for this problem first as I don't want to have to rekey in all my contacts. Restore is last resort. I have tried everything that has been suggested (that I can find), but I am not technologically inclined and many of the answers have to do with Mac rather than Windows. Can anyone out there help?
My iPhone is recognized by iTunes. The issue is that it will not complete its sync cycle. I have tried searching for other resolutions, but I haven't found anything similar for a Windows system, only Mac.
-
When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..
Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally. -
Iphone 5 will not update apps. s
Stuck in "waiting" even after multiple resets to phone and through settings. HELP!Have you tried deleting the waiting apps and then re downloading? I used to get it all the time on my phone in iOS 7.
-
my iphone 4s is not charging beyond 44% n if at all charges, it stuck's at 77%,done with reset,restore backup ...but no use
reset done
restore backup done
changed charger
restarted many times
but no use
...in some blogs i av found that itz a problem of ios 7 which doesnt support apple 4s ...is it true?
kindly solve the issue...
.thanx in advance
regards
ajay
frm hyderabadHi nikkiyoung,
If the reset is not helping, you may need to try the recovery mode.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
5. If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
6. If the above steps do not resolve the issue, contact Apple.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Note you will want a backup as, "Recovery mode erases your device and restores it".
Thank you for visiting Apple Support Communities.
Nubz -
Tried to update iPhone 4 to iOS 6 and my phone got stuck in recovery mode. My only option now is to restore my iPhone and lose media. However, I then tried to restore my iPhone and error 1603 occurred. My iPhone is now not working!?!?!
if your computer is not recognizing it, try using a different USB port or different usb cable. if that doesnt work you will need to uninstall and reinstall itunes.
-
My iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.
i have tried to restore it to different firmwares, tried resetting ,dfu mode , different systems etc etc nothing workedMy iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.
i have tried to restore it to different firmwares, tried resetting ,dfu mode , different systems etc etc nothing worked -
Help iPhone 4s could not restore (error 1) - stuck in recovery mode
I thought I had successfully converted from iPhone 3g to 4s could not connect to att phone service. To reinstall, I reset to iPhone 4s to restore factory settings. software downloaded successfully, but after install completes I get a message that iPhone 4s could not restore (error 1). Followed by message that iTunes has detected an iPhone in recovery mode and that I can restore original setting bu clicking Restore. Doing that reats the problem After 10 attempts, I am frustrated. Itunes no longer shows capacity, software version or serial number for iPhone . Lists those as n/a. Need help
Unfortunately the restore did not solve the connectivity problem, but it made it even worse. The phone was not connecting to the carrier at all, constantly showing "Searching...". I tried another restore, this time it failed on three different computers (one of them was a fresh iTunes installation)... Strange, that it worked once.
@Unshaven: Multiple combinations of Power and Home button did not work either. Seems to be bricked now. I think I have to return it to Apple ...
Btw. Windows iTunes showes some log errors like 'getenv radio-error' failed and DoesDriverNameMatchDeviceID failed.
Any ideas welcome also regarding the issue of loosing connectivity to the carrier... -
pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..
Hi awison,
If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for using Apple Support Communities.
Best,
Brett L -
Hi, can someone help please - my iPhone hasn't been backed up since early August, now I can't seem to get it to back up to iCloud. I have 9GB of space, I have left it plugged in etc for 11hrs, but keep getting the same message " iPhone backup could not be completed" -what dies that mean.?
Hi,
I was facing issues with both backup and FB integration after the iOs 6 upgrade. Before then I did not have any issues with the iCloud backup service, but after a few days, I noticed that it was continually stuck at the Estimating time for the backup and it never progressed.
As any good techie would, I tackled the most pressing issue first . . . FB integration of course.
I had read in a separate post about this solution so tried it . . .
I deleted the original FB app and hard booted the phone. I then went into settings and entered the data for FB integration. Seconds later, I received a text message to my phone - already listed and verified in FB with a 6 digit code to re-enter instead of my password. Seconds later I was verified and then prompted to download the FB app. All backup and integrated.
Then I went into the iCloud backup, turned it off . . . and deleted the last backup. I then re-enabled backup . . . and although I thought I was going to face the same issue, after a few minutes, it moved on from Estimating time . . . to actually backing up. It is now a small way through the backup and seems to estimate that it will take another two hours to complete.
A good nights work. Backup and integration all sewed up. Good luck.
Cheers
Ian
Maybe you are looking for
-
Problem watching videos in IPhoto
I used to be able to do this - but no longer! The camera icon is there but doubleclicking does nothing. I've just got myself a new Probook, copied everything over from the Imac (which was running Mavericks) and the same applies. Recently imported ph
-
Oracle Apps EUL with Custom Discoverer Views
Disco Environment: OracleBI Discoverer 10g (10.1.2.2) Oracle Business Intelligence Discoverer Plus 10g (10.1.2.54.25) Discoverer Model - 10.1.2.54.25 Discoverer Server - 10.1.2.54.25 End User Layer - 5.1.1.0.0.0 End User Layer Library - 10.1.2.54.25
-
Hello Experts, I am getting the following error while try to start database. In the respective directory I am not able to find initorrcl.ora file. Please help. Its urgent fro my project/job. Error: startup nomount ORA-01078: failure in processing sys
-
Problem when burning idvd project
hi, im using imovie 06hd and idvd 06 with the latest up dates. im trying to put a video film together of my little cousins christening. everytime i try to burn my idvd project it goes through all the process of encoding the video and audio which take
-
Passign currenlty logged in user into transaction iview
Hi Experts, I have query regarding the currenlty logged in user. Problem: I want to pass a currently logged in user as parameter to transaction iView. for example: zsapd.abc=userid. this userid should sent currently logged in user dynamically. How ca