IPhone stuck on screen showing it needs to be connected ti iTunes
I cannot restore my phone. When I try I receive an message saying my phone has not been restorted due to unknown error #6.
- You can try another computer to help determine if it is a computer problem.
- Also try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Similar Messages
-
iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting tips work, help??
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process.
FollowTroubleshooting security software issues to resolve this issue.
In rare cases, these errors may be a hardware issue.
If the errors persist on another computer, the device may need service. -
Ipod touch doesn't turn on, screen shows that it must be connected to itunes.
pod touch doesn't turn on, screen only shows that it must be connected to iTunes. After connecting it and clicking the 'restore', downloaded the software needed to update the device. After all these steps, nothing happened. then the screen suddenly showed the apple logo, then the symbol that shows it must be connected to itunes.. happens again and again.
Maybe here:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
http://support.apple.com/kb/TS3694 -
My iPhone was working fine yesterday and then showed a grey screen with the message 'ios6'. When I tried to use the phone it came up with the error message 'connect to iTunes'. When I got home from work I did this, at first iTunes could not detect the device and then it suggested a system restore. Once the restore had completed I selected the language, country/region and then came back to the same error message 'connect to iTunes'. When I tried to connect the device iTunes could not detect it and stated that there was a problem with the device.
I have telephoned my network provider to request a replacement device on my insurance but they have said they cannot authorise until I have had the fault diagnosed my Apple. Only problem is there are no genius appointments free until Friday!
Any help would be massively appreciated!We're not Apple. Se can not magically make a genius appointment available for you.
-
Stuck on screen with cable and arrow to connect to itunes
I plugged my iphone 4s in to my laptop to back up photos etc. It somehow didn't update and now the only thing it shows on the screen is the cable and an arrow to itunes. Even when I turn it off/on/press home and lock button together. It is telling me to restore it to original settings but I don't want to lose all of my calendar/photos/notes etc. Holly
connect to your computer and restore via iTunes.
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
was download suddenly come for upgrad than i click yes after few minute my phone is stuck than automaticly my phone switch off than its show sometime no service sometime connect your itunes but its have not itunes add option now i dont know what to do. Please help me. My phone is iphone 3gs.plz email me id is [email protected]
omYou must be a Windows sufferer.
http://support.apple.com/kb/TS3694#error1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694#error21
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
one fine day yesterday, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working . May i know how to proceed to recover lost contacts.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
HT1414 my IPhone stuck in a state of need to connect it to iTunes
my IPhone stuck in a state of need to connect it to iTunes. What do I do?
have you tried to connect it to itunes?
-
My brother gave me his old iphone when the touch screen went out on mine. It's in great shape but when I received it, it says that it needs to be connected to itunes to be restored. I have done this and it goes through the whole process then says iphone "iphone" could not be restored. unknown error code (-1). There is not a -1 code on the list and I have tried most of the suggestions.
Does my sim card need to be in when I am doing this? And any other suggestions?I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.
-
My iPod touch screen says it is disabled. Connect to iTunes. When I connect the device to the computer a window pops up and said that the iPod is locked and I need to enter the passcode on the iPod..... I can't get it to do anything. Any ideas?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have a apple ipod touch but recently I restored all the settings, as well as the applications. But now I am not able to add songs to it. There is blank screen that shows the symbol like to connect to itunes first. I'm not able to use that... Please help
The iPod's firmware is corrupt. You'll need to restore it again in iTunes. If necessary, place the iPod in recovery mode for iTunes to recognize the device. Use the instructions in this Apple support document to walk you through the process of placing the iPod Touch into recovery mode.
iOS: Unable to update or restore
B-rock -
My screen shows a USB cable pointing to the ITunes icon. What is my next step? I can't do anything from there on.
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?
I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will. -
Hi,
For no apparent reason my phone stopped working...so I did a reset and got the message 'Restore Needed'. I connected to iTunes and got this message: 'iTunes could not connect to the iPhone because it is locked with a passcode. You must enter your passcode on your iPhone before it can be used with iTunes'.
The problem is, I can't enter my passcode because I'm not given that option on the iPhone. All I seem to be able to do is make an emergency call.
It's been working fine otherwise. Any suggestions?
This is the SECOND replacement iPhone I've had this week and I'm getting a bit fed up.
Thanks in advance for any help,Are you referring to the 4 digit passcode needed to enter the phone and use it's features?
If so reboot your iPhone and enter the passcode to get it operational. Launch Image Capture on the Mac and connect the iPhone. Now you should be able to download the video files to wherever you want on your hard drive.
OT -
how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then restore to enable to open it..what should i do?i cannot bring it to the smart center because i lost my receipt..is there any chance to recover it?thank you so much..i already update my operating system to ios 6.1.3 but when i recover my back up the operating system was ios 6.1.2..
Your phone is in recovery mode. Did you plug it to the computer running itunes? What happend?
Maybe you are looking for
-
How to photo stream on 2 iPads with the same iCloud id
We have 2 icloud accounts. We want to use one of the accounts to photo stream from one ipad to another. Both Ipads are running ios7.04. I added the other icloud account to my Ipad but it does not give me a sign in option it defaults to my account. Do
-
Display Problem while installing Oracle 10g on RHEL 5
All, I'm in the process of installing Oracle 10g R2 on RHEL4, when i'm trying to issue ./runInstaller i'm getting the below error. I could get the xclock on the host, even then i'm getting below display error, could any one please help me to resolve
-
I include in my message to recipient that I'm attaching something, then I forget to attach. There was an alert that reminded me to add the attachment, but it has disappeared. How do I get it back?
-
Flash Player 13 crashes with Mac OS X 10.6.8
Any version of Flash Player 13 crashes on activation. Installing FP 12 as suggested allows Flash Player to work, but FF 28 plugin check complains "Out of Date" plugin. Update. How serious is the security issue of running this older version of Flash P
-
'You have not yet purchased any apps' message in my purchased window?
'You have not yet purchased any apps' message in my purchased window? tried signing out and signing in again and restart..