Iphone suddenly shows itunes logo and usb
My iphone just showed the itunes logo and usb cord image, without having done anything. How can I recover pictures and data that were in the phone memory?
Before you connect to your computer , if necessary in recovery mode iPhone and iPod touch: Unable to restore , copy the iphone backup folder to a safe place, in case you need the backup again.
The location of the folder is here:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.
You backup contains pictures taken with the phone and your data and settings. More info here. iPhone and iPod touch: About backups
So, in case your phone gets recognized by your computer, let it restore and use the latest backup to get your data and settings back.
Similar Messages
-
while opening my iphone 4 it shows itunes logo and usb cable and stucks there, while opening my iphone 4 it shows itunes logo and usb cable and stucks there
It's in recovery mode. Plug it into your computer running iTunes and restore it.
-
I tried to update iphone 4 to the 5.1 version. After installing on computer, connected to update phone. Phone will not come back on, showing itunes logo and usb cable. Please help
Hi ..
Help here > iOS: Unable to update or restore -
IPod Touch shows itunes logo and USB connector on the screen??
Hi,
I was trying to update the version of the software on my iPod Touch to V3. But it threw an error and after that it is not getting recognized by itunes. It only shows itunes logo and USB connector image on the ipod screen. How do i get the ipod workng again? plz help.try the suggestions in this KB.
JGG -
upgraded to ios7 iphone now displays itunes logo and usb cable will not restore, will not restart
Hi there emynona,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
Ipad shows itunes logo and usb
my apple ipad shows itunes logo and usb.
please help to resolve this issue.
thanks
navinIf this a new iPad? You need to connect your iPad to your computer via iTunes to set it up. Make sure you have the latest version of iTunes on your computer.
-
Plugged in my Apple tv to tv and light flashing non stop.Tv screen showing iTunes logo and USB cable.Not responding to anything
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
HT201412 it shows itunes logo and usb cable with arrow after that it switch off itself
iPAD shows itunes logo and usb cable with arrow after that it switch off itself
If the Restore doesn't work, force your iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
Iphone shows itunes logo and usb
Tried to update the OS 4.3.2, it gave an error message at the end and displayed ituned logo and usb cable image. I checked it online and found others that had same problem. The phone was fronzen!!!. I pressed the two buttons simultaneously to reset it and it erased everything that I had. Luckily I have backup but ITunes wont restore it. What could have gone wrong?
Hi,
This can happen if the connection between the iPhone and computer has been interupted or the software has encounted an error whilst it is being downloaded. If you can try another backup and if that doesnt work keep resetting the iPhone it will restore. I have had the same problem. But it can happen with something as simple as the connection being interrupted.
Good luck! -
I just tried updating the most recent software on my 3GS (on my Mac) but it said the updated on my phone failed. Now my phone is frozen and only showing the itunes logo and USB cable. When I connect to the USB lead, its says: iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.
Have I lost all the data on my phone?
What should I do?
Help!
MThe iTunes logo and cable indicates that your iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
For the 3004 error code does the troubleshooting for it on the page that you posted from not help ? -
TS1702 cannot restore the phone on the screen just show itunes logo and USB cable
cannot restore the phone while trying to download the ios 6
the screen shows only itunes logo and USB cableplug your ipod into itunes...it may not do anything plugging it into your own itunes so you may want to try plugging it into someone elses to save the trouble. I had this same problem last week plugged it into my dads ipod and it worked (:
-
HT4528 Restore failed, Screen shows iTunes logo and USB cord
I tried to restore my iPhone with iTunes and a message popped up saying could not restore. When the phone turns on, the screen shows an iTunes logo, an up arrow, and a USB cord. I have tried restarting and it goes back to that screen.
Place the device in DFU mode then restore it.
-
I just got my Iphone and all its doing is showing the USB cord Logo and the Ituns logo, I need help ASAP!
http://support.apple.com/kb/HT1808
-
I was updating new OS with itune to my Iphone 4S. it stuck in mid and showing itune and usb connect icon. After restart also, showing same icone. it is unable to connect with itune after multiple tries also. would you please help me to rectify this problem?
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success
NOTE:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download -
Ipad only shows itunes logo and usb connecter...
my ipad 2 quit in the middle of an app ( I was watching a tv show) and went to the black screen with the white apple logo. I rebooted it and it will only show the itunes logo in the middle of the black screen with a usb cord below it. I cannot get it to respond to anything, i have connecting it to the pc to itunes and done the update and tried to recover the software but it cannot...
Hey RStarks04,
Sounds like this is the image you're seeing?
If so, you'll want to perform a recovery-mode restore. You can read more about it here:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Best,
Delgadoh
Maybe you are looking for
-
I have iPhoto on my eMac and would like to view my pix on my iPad. How do I do that?
-
HTML page with FLASH object doesn't reload upon a redirect
Am using: ECC 6.0 and ABAP SAPGUI development Hi All, I'm seeing a frustrating issue that i'm hoping others have seen and resolved. Here is what i'm attempting and below that is the issue: 1) I have created a ABAP program in which i'm using the HTM
-
What do I need to look for on my MacBook Pro to see if it will support Mountain Lion?
I see some MacBooks will not be able to get Mountain Lion. Which and where can I look to find out?
-
Need you help !!! -- datasource field to ECC table mapping for 0material
Dear experts: Recently we need to get a quick turnaround on the fields we would be bringing into BW through standard extractors for the tables MARC and MBEW. My idea is to look at those master data extractors like 0MATERIAL, 0PLANT and then try to fi
-
How can we check priority wise execution in BRE
Hi, I have to check how priority is working in BRE, for this i have created policy with below rules. Rule1: updateBuyerID(Priority 0): if 1 then 100 Rule2: updateBuyerID(Priority 1): if 2 then 200 Rule3: updateBuyerID(Priority 2): if 3 then 300 Rule4