IPhone support for H.264 with B-Frame

Hi All,
In the iPhone documentation, it is mentioned that iphone supports:
- H.264 Baseline Profile Level 3.0 video, up to 640 x 480 at 30 fps. Note that B frames are not supported in the Baseline profile.
Are there plans to support B-frames in the near future ? Do you think iPhone 3G will have B frames supported ?
Thank you very much,
kusno mudiarto

As noted in the above article, support for H.264 in the native HTML5 player on Windows 7 launched 7 weeks ago in Firefox 21.
The forum software detected your Firefox as version 18. Is that correct?
Version 18 is not secure; Mozilla discloses [https://www.mozilla.org/security/known-vulnerabilities/firefox.html security flaws] after each new release. Is something holding you back from upgrading to Firefox 22? Please let us know so we can suggest solutions or workarounds.
If Help > About Firefox shows Firefox 22.0, you may need to clear the preference that is misreporting your version number. See: [[Websites say that Firefox is outdated or incompatible even though it's the latest version]].

Similar Messages

  • Will there be support for Adobe Ideas with the Adobe Ink and Slide?

    Will there be support for Adobe Ideas with the Adobe Ink and Slide?

    We're working on an update to Ideas to add support for Ink & Slide.  Stay tuned for further information as to timing.
    Kim
    Adobe Ideas Team

  • Symantec Endpoint Protection (SEP) adds support for Windows 10 with 12.1.6 MP1.

    Hello Everyone,
    Symantec Endpoint Protection (SEP) adds support for Windows 10 with 12.1.6 MP1.For Symantec Endpoint Protection 12.1, a maintenance patch has been released on July 29, 2015. Customers will need to be current on maintenance to receive the maintenance patch update. For more information, visit our SEP 12.1 Windows 10 Knowledge Base.You can upgrade to Windows 10 with Symantec Endpoint Protection 12.1.6 MP1 installed. You must uninstall earlier versions of Symantec Endpoint Protection. The operating system upgrade stops if it detects an earlier version of Symantec Endpoint Protection.The following operating system upgrade paths are supported with 12.1.6 MP1 installed:Windows 8.1 to Windows 10Windows 8 to Windows 10Windows 7 to Windows 10For more details check the following article:http://www.symantec.com/docs/INFO2746SEP...
    This topic first appeared in the Spiceworks Community

    Hello,
    Just to give an update. We were able to make this work but we used Symantec Protection Engine for Cloud Services instead. Also, for anyone having problems with the parameters - we used the exact same parameters listed in Peoplebooks or on the delivered virusscan.xml file, just update the IP address. We also saved the xml file on both the Portal.war and PSIGW.war directories.

  • No 3G iPhone support for Greek language/keyboard!

    Last Friday, the very first day of appearance of iPhone in the greek market, I bought, from a greek Vodafone shop, a 16GB iPhone 3G.
    It was quite a bad surprise and disappointment to me, when i realized that greek language was not included and supported in the international language and keyboard package of the device! That makes it the first mobile phone Vodafone provides to the greek market, without supporting greek language! When I mentioned that to Vodafone people, here in Athens, Greece, they blamed Apple for that problem. They said that a new firmware update is expected by Apple, and probably then the problem will be solved!!
    So, ladies and gentlemen, is there any information about the availability of greek language/keyboard support for the 3G iPhone?
    Thank you for your time
    Christos Michalopoulos
    Athens, Greece
    <Edited by Moderator>

    i sen this to support under enhancement request in case anyone is bored of typing:
    Hi,
    I recently signed a contract with vodafone Greece for 46 € plan (one of the more expensive from the countries that the iPhone is available) in order to get an iPhone 3G 16GB for 430 € (also one of the highest prices of iPhone with a contract) only to find out that there is no Greek Keyboard. This is unacceptable. I don't care for which other countries you have made keyboard or not (although you make sure to rub it in my face) but the essence of the iphone is that it is a tool to have with you all the time and if the is no ability to right in your native language it is rendered useless. The think that is more frustrating is that those who bought the iPhone from abroad (at 1/4 of the price) and jailbroke it have a Greek keyboard, made by Greek hackers/programmers.
    Today comes, as i am told the 2.1 firmware update and i sincerely hope that it has the Greek keyboard in it otherwise my (and many other i spoke with that bought the iPhone due to its features and not due to the Apple brand) loyalty to the Apple brand (which is already in bad shape due to the Greek retailer Rainbow) is going to be in jeopardy.
    please fix this
    thank you

  • BUSINESS QUESTION - iPhone Support For Advertising

    1. As a developer, can I build in support for advertising on the iPhone 3G?
    2. If I build an iPhone business application, can I support ADs today? Future?

    I think Google should be able to locate ad networks that serve ads in a size supported on the iPhone. I know Google AdSense does but I have a feeling it wouldn't generate many clicks.
    You have to have an account with an ad network in order to use their code in any web based application. If you aren't accepted into a network that supports iPhone sized ads, you won't be able to include code beyond a placeholder until you are accepted into a network.

  • Support for using CS5 with Joomla

    So far, the information to get dreamweaver working with Joomla has been non-existent and/or extremely vague.  I've spent my entire Sunday, trying to simply get this to work.
    I ran a local server and followed the adobe tutorial, I uploaded my mysql database file and I either get an error saying that the dynamic-related files could not be reached etc etc etc. error, or I get simply a blank page when I try to view it in the localhost/FOLDER file.
    I am lost.  There is little support for this specific task.  It's my only interest in DW considering I work exclusively with Content Management Systems.  So far setting this up is time consuming, confusing, and well, it simply doesn't work.w
    IS THERE understandable documentation available for setting up the most TALKED ABOUT feature of DWCS5!?!?!?  Is it really even possible?  At this point I am starting even doubt the validity of the posts of people claiming they got this to work.  So far I get a string of unpredictable errors in an extremely complicated and confusing workflow, again, just trying to get the most talked about feature of CS5 to work as advertised.  I'm so frustrated, words cannot express.
    -Matt

    Hello out there? Can anybody be so kind an post a link to a good dokumentation? I am experiancing just the same problem and yes - I am frustrated, too. Pleeeese!!!
    Thank you very much for any little hint.
    Blechkrähe

  • Support for using TNSNAMES with Oracle Thin Driver?

    Hi.
    In the official Oracle JDBC FAQ (http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.htm), they say that from the "10.2.0.1.0" release, the Thin driver hast support for using TNSNAMES entries. Thus, you can use URLs like this:
    jdbc:oracle:thin:@GL (thin driver, but connection info defined in tnsnames.ora)
    Does anyone know how could I use an URL like this? Do I have to install the Oracle client? or can I simply copy a tnsnames.ora file someplace on disk and specify its ubication through an environment variable or something like that?
    I haven't find util information in the Oracle site....any ideas are much appreciated.
    Thanks in advance.

    I just found some info here:
    Re: Thin Driver and Load Balancing
    Thank you very much.

  • Why does firefox drop support for a plugin with an update

    Why the H*ll does Firefox drop support for a plugin when there is an update in Firefox.
    FF4 has reported that 6 of my plugins that work fine in 3.6 are now not supported. !! This is a joke, and happens regularly.
    As a user (a highly IT literate one) this is annoying and frustrating, and from a design standpoint, unprofessional.

    Plugins as in Flash, Java, quicktime or such or do you mean Extensions ?
    Plenty of Plugins seems to be detected and in use by Firefox 4.0 just fine according to your system details by your post.
    If you meant Extensions then check for updates, look at addons.mozilla.org or the Extension homepage for to see if the author has provided a update.
    Generally Extensions can need anywhere from a simple maxversion bump to a lot more for it to work properly on a new Major version of Firefox depending on what the Extension does.
    It is professional actually as extensions that were not actually compatible may actually cause problems big or small if they were to still just ''work'' in a new Major version release so hence the need for them to be properly up to date on any changes and hopefully the extension author is quick about it.

  • IPhone App is crashing and been asking for support for 4 days with no luck, worst support ever!!

    PLATFORM AND VERSION
    iOS
    ifood application closes as soon as it is launched.
    DESCRIPTION OF PROBLEM
    ifood application closes as soon as it is launched. tested it on xcode simulator locally and online, test devices directly through xcode and everything is working fine. also if it passed apple test how come it doesn't launch properly.
    We have over 3000 users use the application daily this is extremely urgent ,  please let us know what we can do as soon as possible
    STEPS TO REPRODUCE
    launch application
    we have contacted apple several times but with no luck! I am soooo disappointed with this kind of service ! there is no phone number to call and they baely reply to my emails! THIS IS AN EMERGENCY! our App has been down for 4 days and we are losing $$$$ every day!

    I'm sorry that Apple couldn't help.  The reason why is because they can't support third party applications since iFood was not created by them.  They could get in huge trouble for supporting it.
    It might be a glitch with that app itself.  But here are some steps to narrow down the issue to the resolution.
    Make sure your phone is up to date.
    Make sure the app is up to date.
    Try uninstalling and then reinstalling the app.
    Refresh the phone pressing home and power buttons simultaneously.  It won't erase your data.

  • IPhone - Support for wired remotes

    I have been looking all over the place for a wired remote for the iPhone 3G with no luck (and yes I have looked through this forum for an answer before asking my question).
    I have attempted to use three wired remotes from my previous iPods, but two of them do not work at all and the third is completely unreliable. It is an Apple branded wired remote for the iPod video with similar design to the iPod Shuffle and allows you to connect your own headphones. It will only function after a hard-reset of the iPhone 3G, and strangely it takes about a minute or two for the buttons to work. If I unplug and replug the remote it will no longer be recognised and will not work again until the iPhone 3G is restarted.
    I cannot see any wired remote products in the Apple store and I keep getting blank stares whenever I take this question to sales persons.
    I use my iPod extensively and the only reason I bought an iPhone 3G was because I was tired of missing calls whilst listening to mp3s. I consider the wired remote as being essential for satisfactory use when out running, driving the car, etc. Without it the iPod functionally is all but useless to me.
    Is there a wired remote that the iPhone 3G supports?

    All those views and no responses, eh.
    Thanks Apple.
    For continuing to throw your loyal customers under the bus and forcing them to buy new accessories with each generation of iPod/iPhone I will never, ever buy another Apple product again.

  • Will Verizon Be Unlocking the iPhone 5 for International Use with local carriers abroad like they do with the 4S?

    Here is my situation. I am leaving the country on business in a month. Since it is pretty doubtful that an unlocked iPhone 5 will be available for pre-order tomorrow, I'll be buying one at full price under my verizon account (not due for an upgrade yet). Verizon currently SIM Unlocks the iPhone 4S if you meet certain requirements (account in good standing, active 60 days, phone activated on account, etc.) so you can use your iPhone abroad with a local carrier there for cheaper rates. Does anyone think Verizon will do this same procedure for the new iPhone 5? I understand that my new iPhone may not have 4G LTE capability abroad due to hardware limitations on different carrier models, however all new iPhone 5 models have quad band GSM/EDGE and 3G. Would I be able to use this feature if Verizon unlocked my iPhone? It should be noted I am not trying to unlock to use my phone on Tmobile or another US carrier, as with the 4S carriers put a block on this even for unlocked Verizon models. I am looking at this from the standpoint of a traveling business user (and I think there are a lot out there wondering the same thing). Nonetheless I will be preordering the iPhone 5 from Verizon and on release day I will call them and ask if they will unlock it. If they don't I will return it. I'll update my findings here for anyone else curious about this as well.

    Egilbbys21... I am curious how things worked out with getting a nano SIM and your iPhone 5.  Our family will be visiting Manila this summer, and I would like to hear a first-hand account about your phone experiences.  Do you purchase minutes for call/texting?  What about data?  Any feedback you can give from your trip regarding your iPhone usage would be helpful.  Thanks!

  • Support for WS-AtomicTransaction with OSB

    Hello!
    At the moment I'm trying to migrate webservices to be accessible over the OSB. During this process I'm trying to access from the Oracle OSB (11.1.1.7.0) webservices with SOAP and WS-AtomicTransactions. According to "3.8.5.3 Enabling WS-AtomicTransaction" in the document http://docs.oracle.com/cd/E21764_01/doc.1111/e16793/patch_set_installer.htm#BABBCEDH AtomicTransactions are supported starting with Oracle Fusion Middleware Release 11.1.1.3.0.
    In the OSB configuration the file policy-accessor-config.xml exists and the entries according to "3.8.5.3 Enabling WS-AtomicTransaction" exists after the installation.
    However I was not able to call a webservice with enabled AtomicTransaction successfully from the OSB. I get the error message "transaction context is required to be inflowed".
    In the end I'm trying to make two webservice calls from the OSB using the same transaction. This means, if the second call fails, the first call is also rolled back. I haven't found any document describing this scenario using WSAT in the web yet. But I was able to achieve this using the EJB transport.
    Is SOAP with WS-AtomicTransactions supported by the Oracle OSB 11.1.1.7.0?
    Is there any documentation how to use this feature?
    Will SOAP with WS-AtomicTransactions be supported with the OSB 12c?
    Best regards
    Bernhard Mähr

    Hello,
    WS-CAF (Web Services Composite Application Framework) is a work in progress, and the transaction protocols have not been completed yet. Oracle will support a protocol for distributed transactions in a coming release, once the industry has a standard in good shape enought to implement.
    Regards
    Tugdual Grall

  • Support for DNG files with lens corrections?

    Aperture 3.0.1 with the RAW Compatibility Update 3.1 now supports the lens corrections in my Olympus E-P1's native RAW format. yay!
    unfortunately, since Aperture didn't support the camera for six months, I began a switch to Lightroom. consequently, I now have several thousand images that have been converted from the EP-1's native RAW format (ORF) to Adobe's so-called open RAW format (DNG). these DNGs don't load in Aperture (RAW format unsupported errors) because Aperture doesn't support DNGs with lens corrections.
    Apple, can you please advise if lens corrections you support in native RAW files will also be supported in DNG conversions sometime soon? if so, I'll know it's safe to switch back to Aperture and recover the last six months of photos when the next RAW Compatibility Update happens.

    Aperture 3.0.1 with the RAW Compatibility Update 3.1 does not support lens corrections. If you want lens corrections in Aperture you have to use Plugins like PTlens.
    To my knowledge Aperture ignores all lens correction data in the original RAW files, just like it does with all the settings of the camera.

  • RMS Client support for ADFS 3 with MFA

    We are using Azure RMS. The Users are synchronized from on-premise AD onto Azure AD. If we configure the Relying Party Trust for Azure RMS authentication with MFA (Multi-Factor-Authentication like SMS, OneTimeToken...), the User couldn't login from a Windows
    Client with the RMS Client installed.
    The reason is, that RMS Client only ask for username and password. A another box for OTP, SMS Code and so on doesn't appears.
    Because the login into Azure RMS to get access to protected documents is very sensitive, it should be able to using MFA with the RMS Client.
    Are there a timeline to implement MFA support in the RMS Client (e.q. for Windows)?
    Thanks for your help.

    Office apps have historically required app passwords since they didn't support MFA. Newer Office apps are now using modern authentication that allow sign-in through ADFS and/or Azure AD. If MFA is enabled in Azure AD for federated accounts, the primary
    authentication should be done by ADFS, after which Azure AD will perform the MFA. The new Android apps came out later than the new iOS apps. There is a blog post put out by the Office team with details on the modern auth for their apps at
    http://aka.ms/officemodernauth.

  • No support for editing library with second computer

    Am I wrong about this?
    There is no way to edit the songs, books, movies, etcs on an ipod/iphone unless you have the computer that has your library on it?
    I have my main computer which has my library of songs, books, etcs which my Ipod is synced with.  However I recently moved and put that computer in storage.  So now I only have my laptop which has no media (songs, moves, etc) at all.  My laptop is Authorized for my account but when I try to remove one of my audiobooks or songs I get the message that I need to sync it which will remove all prior media on the device (not what I want).
    Really all I wanted to do was remove a song or 2, an audiobook and get information about how much each app is taking up (HDD space). 
    If I am correct and there is no way to do this, where do I go to put in a feature request for this?  How did something so basic get over looked?  Is this an intended limitation and probably never be fixed since it is something apple is meaning to do.

    nevermind found my answer here: http://answers.yahoo.com/question/index?qid=20090114155845AAzvnYB
    which basically states you need to go to summary and select Manual Library Management

Maybe you are looking for