IPhone synch error "Unable to read or write to drive C:/".....HELP!

I keep getting this error when I am trying to synch my iPhone with iTunes. It just recently started. It starts to synch and transfer over the music I have bought on my phone then all of a sudden it gives me the error that it can't locate my drive C:/ and can't read or write to it. My C drive isn't full and I even deleted a bunch of stuff. I downloaded the new version of iTunes and have turned off the computer and the phone numerous times. Anyone else have this problem or suggestions??!!

Are you a local admin on the machine?

Similar Messages

ITune 9.0.2 Error "-69" and error "unable to read or write from iPod".

I have an iPod 64GB touch and i can't upload a big chunck of my music and photos since i upgraded my sw version of the iTune to 9.0.2.
I hate this new 9.0.2 version of the iTune, it's SH**.
so... how can i downgrade back to the latest 8.x.x version?

it's just tells me to erase every file that stops the sync, and that's a lot of my music
... ack. To be on the safe side, it would be a good idea to run a chkdsk on the drive that you have those content files stored on. There's a guided help in the following Microsoft document:
[How to perform disk error checking in Windows XP|http://support.microsoft.com/kb/315265]

OBIEE Writeback error - The system is unable to read the Write Back Templat

Hi all,
I'm trying to set up the write back feature for one of the reports. All the set up up including XML file in the custommessage folder is done.Ensured the webmessage name tag value (pmet_update) is same as the one used in the report write back template value etc.
Also the server is restarted after the latest XML file(as shown below) is copied after all type of debugging with similar threads on this matter.
But when i click on the update button in the report (button is highlighted), i'm getting the error
"The system is unable to read the Write Back Template 'pmet_update'. Please contact your system administrator."
here is the xml.
<?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="pmet_update">
<XML>
<writeBack connectionPool="PMTCOG">
<insert></insert>
<update> UPDATE XREF_PMET_URL SET URL= '@{c1}' WHERE API='@{c0}'</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Could you please help?

Hi,
I think that you have to spacify also an SQL statement for the update tag, for example:
<?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="Messages">
<WebMessage name="pmet_update">
<XML>
<writeBack connectionPool="PMTCOG">
<insert> select null from dual</insert>
<update> UPDATE XREF_PMET_URL SET URL= '@{c1}' WHERE API='@{c0}'</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
The witeback wants for both the tags (<insert></insert> and <update></update>) an SQL Statement.
For me it works.
Let me know!
Gianluca Ancarani

Write Back Error The system is unable to read the Write Back Template 'test

Write Back Error The system is unable to read the Write Back Template 'test'. Please contact your system administrator. OK
But, the update button is on.
It did work and now it doesn't... nothing of course that we know of has changed. We got this message when we started and the name of the file was what we put as template name in obiee instead of webmessage name but the update button was off.... now we have update button on and same error.
File is on unix and we have made 777 so it's open to the world.
<?xml version="1.0" encoding="utf-8"?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
<WebMessageTable lang="en-us" system="WriteBack" table="D_EXEC_METRIC">
<WebMessage name="test">
<XML>
<writeBack connectionPool="writeback">
<update>UPDATE D_EXEC_METRIC SET EXEC_METRIC_ICON_WID = @{c3}, EXEC_METRIC_COMMENT='@{c7}' WHERE SECTOR_WID=@{c0} AND EXEC_METRIC_WID=@{c2}</update>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
thanks in advance for your help!

You're better off searching for an answer to this question in the [OBIEE Forum|http://forums.oracle.com/forums/forum.jspa?forumID=378].
The topic is discussed at least twice a month so there's tons of posts with all the answers you need. Make a forum search for writeback and you'll have your answer.
Cheers,
C.

Error: Unable to read footer file

Hoping someone out there can help me. I get this error on
everypage in my site and have no idea how to stop it.
Error: Unable to read footer file
The error does not show up when I preview inside dreamweaver
but only rears its ugly head after I post the site up on the
internet. I have searched for hours through the Dreamweaver menus
and can not find these elusive footers and have no idea where they
are coming from or what footer file it is trying to read.. Please
help. This probably has a simple solution and I am just not able to
understand it. Thank you.

sdrouillard wrote:
> This probably has a simple solution and I am just not
able to understand
> it.
Possibly, but without a URL we can't comment. Post it, and
we'll see.
At a guess, sounds like an include file is missing. Are you
on some sort of
free hosting plan where the host puts some adverts in the
footer? If that
file is removed from your site directory you might get the
error you've
mentioned (at least, that was the case on the only other time
I've seen this
error)
Regards,
Pete.
Peter Connolly
http://www.acutecomputing.co.uk
Derby
UK
Skype ID: acutecomputing

Frm-40502: oracle error: unable to read list of values

Hi All,
I am personalizing the assignment form, where we need to restrict the JOB LOV based on Organization value.
In Forms Personalization we are creating the record group from query and attaching to Job field.
The query is,
SELECT DISTINCT j.NAME, DECODE (1, 2, 1, NULL) c_valid_job_flag,
j.job_id job_id
FROM per_jobs_v j
WHERE j.business_group_id + 0 = :CTL_GLOBALS.BUSINESS_GROUP_ID
AND j.date_from <= :CTL_GLOBALS.SESSION_DATE
AND ( (j.date_to IS NULL)
OR (j.date_to >= :CTL_GLOBALS.SESSION_DATE)
ORDER BY j.NAME
When we use this query, we are getting the error "frm-40502: oracle error: unable to read list of values"
If i replace the bind variable with values we are not getting the error and its working fine.
Replace query:
SELECT DISTINCT j.NAME, DECODE (1, 2, 1, NULL) c_valid_job_flag,
j.job_id job_id
FROM per_jobs_v j
WHERE j.business_group_id + 0 = 202
AND j.date_from <= TRUNC(SYSDATE)
AND ( (j.date_to IS NULL)
OR (j.date_to >= TRUNC(SYSDATE))
ORDER BY j.NAME
how to use bind variables (Block.field) here? We are getting this error only when using the bind variable in the query.
Please share your ideas.
Thanks.

Hi;
What is your EBS version? There are 96 docs avaliable about similar error message. I suggest use metalink for your issue
You can also check:
FRM-40502: Oracle Error: Unable To Read List Of Values [ID 1161404.1]
Frm-40502: Oracle Error: Unable To Read List Of Values. [ID 351931.1]
FRM 40502: Oracle Error:Unable to Read List of Values [ID 179162.1]
Regard
Helios

[SOLVED]error: attempt to read or write outside of partition

Hello, I update my system at least once a week, sometimes I run pacman -Syu more than that. So this system is no more than about 7 days behind what is available today. Last time I did this the kernel got updated and it updated itself again or at least it just ran mkinitcpio, also my passwd and group changed, anything that was not represented in the pacnew version got a representation, this last one mainly featured a lot of changes to "/usr/bin/nologin" from the login false version, whatever it was, nothing that looks too fussy.
Reboot just to see what will happen and I am greeted with this:
Booting `Arch Linux, with Linux core repo kernel'
Loading Linux core repo kernel ...
error: attempt to read or write outside of partition
Loading initial ramdisk ...
unaligned pointer 0x1d
Aborted. Press any key to exit.
I happen to have a usb drive that has Arch Linux 3.11.6.-1-ARCH, so I put that in and get an environment I can work with. Chroot in and so I can run mkinitcpio -p linux, thinking that that is the problem, some error in the kernel, I actually end up using the command
# /usr/lib/modules
, since
# mkinicpio -p linux
won't run, it gives:
==> Building image from preset: /etc/mkinitcpio.d/linux.present: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.config -g /boot/initramfs-linux.img
hexdump: /boot/vmlinuz-linux: Input/output error
==> ERROR: invalid kernel specified: '/boot/vmlinuz-linux'
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.config -g /boot/initramfs-linux-fallback.img -S autodetect
hexdump: /boot/vmlinuz-linux: Input/output error
==> ERROR: invalid kernel specified: '/boot/vmlinuz-linux'
However,
# mkinitcpio -g /boot/linux.img -k 3.14.6-1-ARCH
will. Everything finishes with a success, exit out, reboot and bam, same message, so it is not the kernel at least not on its own. Here is what my fstab looks like:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda3
UUID=4dbfa319-4f88-49c1-a595-27faabfe4f57 / ext3 rw,relatime,data=ordered 0 1
# /dev/sda1
UUID=4C05-1A6B /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
# /dev/sda4 LABEL=home
UUID=bff35508-596c-4d7c-a983-b6b0ddc4f6e2 /home ext3 rw,relatime,data=ordered 0 2
# /dev/sda2
UUID=e87030ad-3226-41e3-938a-5be3351e34ed none swap defaults 0 0
#efivars
efivarfs /sys/firmware/efi/efivars efivarfs defaults 0 0
#MySQL, linux version
tmpfs /var/lib/mysqltmp tmpfs rw,gid=89,uid=89,size=100m,mode=0750,noatime 0 0
and my mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect block filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev block filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev block mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev block lvm2 filesystems"
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
While I am here I might as well ask this is this an appropriate boot structure?
/boot/
>>>>/EFI/
>>>>/>>>/grub/
>>>>/>>>/>>>>grubx64.efi
>>>>/grub
>>>>/>>>>/fonts
>>>>/>>>>/grub.cfg
>>>>/>>>>/grub.cfg.example
>>>>/>>>>/grubenv
>>>>/>>>>/local
>>>>/>>>>/>>>>/*.mo files
>>>>/>>>>/themes/
>>>>/>>>>/>>>>>>/starfield/*.png *.pf2 files
>>>>/>>>>/x86_64-efi
>>>>/>>>>/>>>>>>>/ *.mod files
>>>>/initramfs-linux-fallback.img
>>>>/initramfs-linux.img
>>>>/linux.img
>>>>/vmlinuz-linux
Anyone have any ideas on what I can do to get my system back?
Last edited by Never (2014-06-11 03:17:24)

Inside of my rescue disk I get:
# efibootmgr
BootCurrent: 000A
Timeout: 0 seconds
BootOrder: 0005,0003,0001,0002,000A,0004,0000,0007,0008,0009
Boot0000 Windows Boot Manager
Boot0001* USB Flopp/CD
Boot0002* USB Hard Drive
Boot0003* arch_grub
Boot0004* ATAPI CD-ROM Drive
Boot0005* grub
Boot0007* CD/DVD Drive
Boot0008* USB Floppy/CD
Boot0009* Hard Drive
Boot000A* UEFI: SanDisk Cruzer Glide 1.26
my /dev/sda1 was /boot/ not /boot/efi, so I made that change, allowing /boot on / [/dev/sda3] to now be populated with part of the stuff on /dev/sda1 and /dev/sda1 would just have /boot/efi/, instead of all of boot, then ran:
# modprobe -r efivars
# umount /sys/firmware/efi/efivars
# modprobe -r efivarfs
# modprobe efivarfs
# mount -t efivarfs efivarfs /sys/firmware/efi/efivars
# efivar -l
returned a bunch of variables
# grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=grub --recheck --debug
# grub-mkconfig -o /boot/grub/grub.cfg
# efibootmgr
BootCurrent: 000A
Timeout: 0 seconds
BootOrder: 0003,0001,0002,000A,0004,0000,0007,0008,0009
Boot0000 Windows Boot Manager
Boot0001* USB Flopp/CD
Boot0002* USB Hard Drive
Boot0003* grub
Boot0004* ATAPI CD-ROM Drive
Boot0007* CD/DVD Drive
Boot0008* USB Floppy/CD
Boot0009* Hard Drive
Boot000A* UEFI: SanDisk Cruzer Glide 1.26
arch_grub, whatever that was, went away. Pull out of arch-chroot, unmount sdaXs, reboot and:
ERROR: No boot disk has been detected or the disk has failed.
An extensive hp diagnostic check reveals... Nothing wrong.
A reboot and removal of all data written in /dev/sda1 and /dev/sda3/boot sectors reveals:
# mkdir /boot/efi/123
mkdir: cannot create directory /boot/efi/123: Cannot allocate memory
Which persist even on a restart and trying to mkdir into /mnt/arch/boot/efi/EFI while outside of arch-chroot. No idea why that is happening, oh well.

10g - write back - The system is unable to read the Write Back Template

hi,experts,
I enabled write back on a report.
the button (write back) is enabled (not grey)
but when I click the button, there is a message
The system is unable to read the Write Back Template 'UPDATETESTWRITEBACK'. Please contact your system administrator.
I put UPDATETESTWRITEBACK.XML in C:\OracleBI\web\msgdb\customMessages
the syntax in the xml is correct.
what is the result? any log to check?

Its not mandatory to have the same template name as your xml file name.
But the <WebMessage name= "UPDATETESTWRITEBACK"> should be same what the templetae you are using in the webcat.
Please find sampel xml which can have any xyz name in the folder "OracleBIData\web\msgdb\customMessages'
<?xml version="1.0" encoding="utf-8" ?>
<WebMessageTables xmlns:sawm="com.siebel.analytics.web.messageSystem">
<WebMessageTable lang="en-us" system="WriteBackTemplates" table="Templates">
<WebMessage name= "ResourceAllocation">
<XML>
<writeBack connectionPool="--your connection pool name">
<insert> Insert statement </insert>
</writeBack>
</XML>
</WebMessage>
</WebMessageTable>
</WebMessageTables>
Cheers,
Rajeev A

Forms Personalization - FRM-40502: ORACLE error: unable to read list of val

Hi,
I am using Forms Personalization to create an LOV using builtin. In the Builtin, I have put the sql query under create record group from query. In the query, when I hardcode a value, in a where condition, the LOV works fine but when I replace the hardcoded value with :block.field value, it gives the error, FRM-40502: ORACLE error: unable to read list of values. Below is the part of the sql query where I am facing this issue.
"WHERE related_customer_id = :ORDER.INVOICE_TO_CUSTOMER_ID"
Please get back to me if anyone has faced similar problem.
Thanks all in advance,
Regards,
AN

Please post a new thread for each issue. Tacking onto a 2 year old post is generally a bad idea.
Forms personalization is a feature in Oracle E+Biz Suite and as such you should post your question in this forum:
OA Framework

SSRS 2008 R2 - on Preview report in report builder itself, getting an error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt". Any Suggestions please to resolve it?

Hi,
I am working on SSRS 2008 R2. On Preview report in report builder itself, i am getting an error "Attempted to read or write protected memory. This is often an indication that other memory is corrupt".
See my below screen shoot.
Any Suggestions please to resolve it?
thank you in advance !
best regards,
Venkat,
[email protected]

Hi Venkat,
According to the error message, I guess that the error occurred when you previewed the report in Business Intelligence Development Studio (BIDS).
Based on my research, I think it may be a Window Layout issue of Visual Studio. Please try the steps below:
Click “Window” button from the toolbar ribbon.
Click “Reset Windows Layout” option.
Click “Yes” to finish the operation.
The following thread is for your reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/90949d68-a611-467c-b438-be97b8ab250b/attempted-to-read-or-write-protected-memory-this-is-often-an-indication-that-other-memory-is
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

B2B RosettaNet incoming messages throws error "Unable to read the preamble"

Hi,
We have configured Oracle B2B to send Invoices to TP using Rosettanet V2.0.
The incoming message are coming to B2B server via DMZ running apache HTTP server. We have security certificates installed on DMZ and has shared the public key with the TP.
TP has shared public key which we have installed on SOA server keystore.
We are able to see incoming messages in "Wire Message" tab, but the status is "processing". The SOA log file shows the error "Unable to read the preamble".
Any suggestion on this really appreciated.
Thanks,
Adarsh

The configuration that we have here is -
Outbound
SOA -> <Firewall> TP
Inbound
TP -> DMZ(SSL Enabled) -> FIREWALL -> SOA Server
SOA server is SSL enabled too, but the communication between DMZ and SOA has been configured on HTTP (non SSL). We shared the public key of DMZ server with the TP.
Here is the message that we are receiving from TP.
--27888100.1321681003096.JavaMail.webmethods@exshaw
Message-ID: <14801385.1321681003095.JavaMail.webmethods@exshaw>
Mime-Version: 1.0
Content-Type: multipart/related; type="application/xml";
boundary="----=_Part_6149_9357410.1321681003080"
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Preamble
Content-ID: <16966956.1321681003078.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE Preamble SYSTEM "Preamble_MS_V02_00.dtd">
<Preamble>
<standardName>
<GlobalAdministeringAuthorityCode>RosettaNet</GlobalAdministeringAuthorityCode>
</standardName>
<standardVersion>
<VersionIdentifier>V02.00</VersionIdentifier>
</standardVersion>
</Preamble>
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Delivery-Header
Content-ID: <18073579.1321681003079.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE DeliveryHeader SYSTEM "DeliveryHeader_MS_V02_00.dtd">
<DeliveryHeader>
<isSecureTransportRequired>
<AffirmationIndicator>Yes</AffirmationIndicator>
</isSecureTransportRequired>
<messageDateTime>
<DateTimeStamp>20111118T223643.053Z</DateTimeStamp>
</messageDateTime>
<messageReceiverIdentification>
<PartnerIdentification>
<domain>
<FreeFormText xml:lang="EN">DUNS</FreeFormText>
</domain>
<GlobalBusinessIdentifier>616252495</GlobalBusinessIdentifier>
</PartnerIdentification>
</messageReceiverIdentification>
<messageSenderIdentification>
<PartnerIdentification>
<domain>
<FreeFormText xml:lang="EN">DUNS</FreeFormText>
</domain>
<GlobalBusinessIdentifier>200103377</GlobalBusinessIdentifier>
<locationID>
<Value>Calgary</Value>
</locationID>
</PartnerIdentification>
</messageSenderIdentification>
<messageTrackingID>
<InstanceIdentifier>ac1aab8df70da53a000ca325</InstanceIdentifier>
</messageTrackingID>
</DeliveryHeader>
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Service-Header
Content-ID: <27927869.1321681003079.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE ServiceHeader SYSTEM "ServiceHeader_MS_V02_00.dtd">
<ServiceHeader>
<ProcessControl>
<ActivityControl>
<BusinessActivityIdentifier>Invoice Notification</BusinessActivityIdentifier>
<MessageControl>
<fromRole>
<GlobalPartnerRoleClassificationCode>Buyer</GlobalPartnerRoleClassificationCode>
</fromRole>
<fromService>
<GlobalBusinessServiceCode>Buyer Service</GlobalBusinessServiceCode>
</fromService>
<inReplyTo>
<ActionControl>
<ActionIdentity>
<GlobalBusinessActionCode>Invoice Notification</GlobalBusinessActionCode>
<messageStandard>
<FreeFormText>PIDX</FreeFormText>
</messageStandard>
<standardVersion>
<VersionIdentifier>1.0</VersionIdentifier>
</standardVersion>
</ActionIdentity>
<messageTrackingID>
<InstanceIdentifier>33323237303737323338343533343832</InstanceIdentifier>
</messageTrackingID>
</ActionControl>
</inReplyTo>
<Manifest>
<numberOfAttachments>
<CountableAmount>0</CountableAmount>
</numberOfAttachments>
<ServiceContentControl>
<SignalIdentity>
<GlobalBusinessSignalCode>Exception</GlobalBusinessSignalCode>
<VersionIdentifier>V02.00</VersionIdentifier>
</SignalIdentity>
</ServiceContentControl>
</Manifest>
<toRole>
<GlobalPartnerRoleClassificationCode>Seller</GlobalPartnerRoleClassificationCode>
</toRole>
<toService>
<GlobalBusinessServiceCode>Seller Service</GlobalBusinessServiceCode>
</toService>
</MessageControl>
</ActivityControl>
<GlobalUsageCode>Test</GlobalUsageCode>
<pipCode>
<GlobalProcessIndicatorCode>P21</GlobalProcessIndicatorCode>
</pipCode>
<pipInstanceId>
<InstanceIdentifier>PIPAC11165C133BA538E8A0000018B17B6C</InstanceIdentifier>
</pipInstanceId>
<pipVersion>
<VersionIdentifier>1.0</VersionIdentifier>
</pipVersion>
<KnownInitiatingPartner>
<PartnerIdentification>
<domain>
<FreeFormText>DUNS</FreeFormText>
</domain>
<GlobalBusinessIdentifier>616252495</GlobalBusinessIdentifier>
</PartnerIdentification>
</KnownInitiatingPartner>
</ProcessControl>
</ServiceHeader>
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Service-Content
Content-ID: <24309402.1321681003079.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE Exception SYSTEM "Exception_MS_V02_00.dtd">
<Exception>
<ExceptionDescription>
<errorClassification>
<GlobalMessageExceptionCode>PRF.ACTN.GENERR</GlobalMessageExceptionCode>
</errorClassification>
<errorDescription>
<FreeFormText>Errors: The Invoice Number entered already exists.; Warnings: Using default Supplier Site., Using default Supplier Group., Using default Supplier User., Units has been truncated.</FreeFormText>
</errorDescription>
<offendingMessageComponent>
<GlobalMessageComponentCode>ServiceContent</GlobalMessageComponentCode>
</offendingMessageComponent>
</ExceptionDescription>
<GlobalExceptionTypeCode>Receipt Acknowledgment Exception</GlobalExceptionTypeCode>
</Exception>
------=_Part_6149_9357410.1321681003080--
--27888100.1321681003096.JavaMail.webmethods@exshaw--

Help! Content generation error. [Error: Unable to read JPEG.]

Hey all -
Havben't seen this one in the forums. I'm importing an article into an existing folio. The processing status bar goes to the end, but before upload starts, I get this error:
Content generation error.
[Error: Unable to read JPEG.]
Any idea how to troubleshoot this? I'm up against a hard deadline and really need to get this worked out. Thanks!

In that case it would be good, if the error message could be more specific; i.e. telling the name(s) of the JPEG images.
However, you could check all placed JPEG images, if they can be opened with PhotoShop.
Uwe

External USB boot: "fs error - unable to read inode" occurs eventually

[ISSUE: on ONE PC only: ALL external USB drives eventually give console readout like: "fs error - unable to read inode" - endlessly , and no longer accessible.]
I am BOOTING off of the drives in question [ext2 formatted] which may be a large part of it though perhaps not.
PC spec:
- Older motherboard ASUS p4pe.
- has USB 2 though probably a bit iffy.
- Does NOT boot from USB so using the briilliant PloP bootmanager on CD to achieve external USB boot.
Of interest was comments found about the : the ehci_hcd module
which seems very likely that the motherboard I'm having problems with is because of the USB implimentation and this.
REALLY could use a fix for this one. At least, I need to understand what's happening.
OR:
I found this on the Ubuntu forum and was hoping it would be the FIX and that I could get a comment about how to try on my beloved ARCH systems.
------------ Script TEXT from forum over at ubuntu -----------
http://ubuntuforums.org/showthread.php?t=452246
The POSTER there replied saying the following:
problem: USB disk change to read only
Hi,
I solved this 7-8 months ago and haven't had any problems since.
Create a executable file for example /usb/bin/usbhdfix and place the following in it.
Code:
#!/bin/bash
echo 1024 > /sys/block/$1/device/max_sectors
echo 1 > /sys/block/$1/device/scsi_disk:*/allow_restart
1024 works for me but I've also heard about people going lower than default with good results.
I have a Seagate FreeAgent which also have the problem with restarting after spinning down so solution for that is added as well.
Then create a udev-rule.
Code:
# /etc/udev/rules.d/50-fix_usb_hd.rules
SUBSYSTEMS=="scsi", ATTRS{vendor}=="Seagate", ATTRS{model}=="FreeAgentDesktop", RUN+="/usr/bin/usbhdfix %k"
================== BUNCH of LINKS that seemed possibly relevant ==========
https://bugs.launchpad.net/ubuntu/+sour … +bug/88746
http://ubuntuforums.org/showthread.php?t=452246
http://ubuntuforums.org/showthread.php?t=991613
http://bbs.archlinux.org/viewtopic.php?id=63126
http://bbs.archlinux.org/viewtopic.php?id=53822
Last edited by yvonney (2009-03-29 20:11:19)

Sirrah wrote:How do I manually mount a drive that automounts?
As root:
ntfs-3g /dev/sdX /mnt/mountpoint
or
mount -t ntfs-3g /dev/sdX /mnt/mountpoint
http://wiki.archlinux.org/index.php/NTFS_Write_Support
You can also pass other options to mount: (in this example drive is ext3)
mount -t ext3 -o user,rw,async /dev/sdX /mnt/mountpoint
check man mount for all the details.

IDOC type abc contains error (Unable to read segments)

Hi All
While importing IDOC in IR i am getting error "IDOC type abc contains error (Unable to read segments)".
We have added one extra field into our existing customised IDOC into R3 and successfully releases. Previous IDOC having version 640 and modified IDOC having version 700.
In IDX2 i have successfully imported IDOC metadata and one extra added field also i can see there. But while importing into IR its showing me error "IDOC type abc contains error (Unable to read segments)".
I have tried to import different IDOC using same user and it was successfully imported means there is no authorization error.
Please suggest me where could be the problem?
Regards
Dheeraj Kumar

Do The following:
1) Delete the IDX2 entry and try to reimport once again....and in the IR also do the same.
2) Have a look into this SAP Note- 742093
3) Check the IDX1 entry , RFC destination entry... may be not pointing correctly.
4) If any field which is mandatory in the idoc must not be disabled...take care about it.

Yaourt error - unable to read pkgbuild

Hi,
Trying to install any package from AUR using yaourt -S <pkgname> I get an error "Unable to read PKGBUILD for <pkgname>"
I have no clue how to troubleshoot this. I can edit the PKGBUILD OK. This has happened on every AUR package I have tried and only started yesterday. Here is the problem
$ yaourt -S powernowd
==> Downloading powernowd PKGBUILD from AUR...
bsdtar: Removing leading '/' from member name
x .
x PKGBUILD
x powernowd.rc.d
x powernowd.conf.d
First Submitted: Wed, 12 Dec 2007 04:39:19 +0000
powernowd 1.00-1 : Program for powering down CPUs dynamicly
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
Unable to read PKGBUILD for powernowd
==> WARNING: Following packages have not been installed:
powernowd
and here is yaourtrc
# yaourtrc - Configuration for yaourt
# See yaourtrc(5) for more information
ABS_REPO=(testing core extra community-testing community gnome-unstable kde-unstable)
#NOCONFIRM=0
#FORCE=0
#AUTOSAVEBACKUPFILE=0
#FORCEENGLISH=0
#EDITFILES=1
#AURCOMMENT=1
#DEVELBUILDDIR="/var/abs/local/yaourtbuild/"
#DEVEL=0
#NOENTER=1
#AURUPGRADE=0
#AURVOTE=1
#AURSEARCH=1
#TERMINALTITLE=1
#EXPORTDIR=""
#TMPDIR="/tmp"
#MAXCOMMENTS=5
#EDITOR="$EDITOR"
#PACMANBIN="/usr/bin/pacman"
#COLORMODE="normal"
#SHOWORPHANS=1
#DIFFEDITCMD="vimdiff"
#DETAILUPGRADE=1
thanks for any pointers

syne wrote:
Had the exact same problem. I suggest you reinstall your pacman, or if you have pacman-git, then replace it with regular pacman. That did it for me. I will try building git once more to see if it that as well would solve the problem.
Hope it helps.
This makes no sense. It's not makepkg that's failing -- It's yaourt. Use makepkg on its own. Submit a bug report to the yaourt maintainer.

IPhone synch error "Unable to read or write to drive C:/".....HELP!

Similar Messages

Maybe you are looking for