IPhone syncing issues after iTunes upgrade

Hi
I just upgraded to iTunes 8.1.1 for Mac. During the install I got a kernel panic and had to restart. iTunes seems to be installed fine. When I connect my iPhone I get messages like "some content will not be copied to the iPhone as this computer is not authorized" or such like. So now several apps, videos and music has been wiped from the iPhone.
I tried authorizing the computer but I just get "This computer is already authorized".
there does not seem to be any particular link between the erased content. Some was purchased on the Mac and some on the iPhone, all from the iTunes store. Before I updated iTunes everything synced fine.
I can d/l the apps again direct to the iPhone but I can't find a way to get the missing music and videos back on the iPhone. Very annoying.
Would re-installing iTunes help?
Any ideas?
Thanks
Chris

Hi Chris,
Try highlighting the one of the songs that will not sync in iTunes> cilck File> Get Info, check the account name and verifying you are authorizing the computer with correct account.
If the issue persists, try removing the SC Info folder as shown here: http://support.apple.com/kb/TS1389
If you still see the issue after removing the SC Info folder, try reinstalling iTunes as shown here: http://support.apple.com/kb/HT1224
-Jason

Similar Messages

  • IPhone sync issues after recent upgrades

    Fellow community members and (hopefully) developer or product folks in Cupertino....
    Ever since the latest releases of iTunes (11.1.2) and iOS (7.0.3) I have been unable to perform a succesful sync - which quite frankly is unnaccepatable.
    I'm on an older MacBook running OS X 10.6.8 and an iPhone 4S, but I'd be amazed if this wasn't a featured combo in pre-release QA?
    On researching this issue it seems like a number of people are experiencing the same thing, which seems anchored in music and playlists? I can back-up, sync/copy apps, but when it comes to music the whole thing seizes up. I've tried some of the community suggested work arounds but to no avail.
    Here are the traits of the issue I'm seeing:
    iTunes goes through the motions of syncing but falls over on step 6 of 6 - "Waiting for changes to apply". From my experience you could be waiting a long time; a very long time. Odds are America might have plugged it's budget defecit by the time my phone syncs.
    I've checked and un-checked options to re-teach my phone about my music playlists but this has had no effect. It's Halloween as I write this and I notice my phone now shows the ghost of playlists past - the music isn't there, but the metadata is, along with icons suggesting I download these tracks? A new commercial feature to boost iTunes revenue, or a buggy and crappy user experience? The more synical out there may say both.
    Come on Apple, this stuff really lets you down, what's the official line? WIll this be patched in an update and in the meantime is there a workaround that works?

    I haven't been able to pull off a successful sync since last Saturday...the same day I updated my 4s to 7.0.3. And since the update my 4s will not play ANY mp3 or music file I uploaded to iTunes. I've long been an apple device junkie and shrugged off the anti-apple & droid fan boys...but this is absolutely unacceptable. There should've been an official statement by now letting people know they're aware of the problem and are working on it.

  • IPhone sync issue with iTunes after Snow Leopard upgrade

    I upgraded to Snow Leopard and since then iTunes does not see my iPhone 3GS and I am unable to sync. I've read the troubleshooting guide to no avail. What am I missing?

    If you are running v10.6.3 as your profile suggests, update to v10.6.8.
    Click your Apple menu / Software Update.
    Restart your Mac after the updates are installed.
    See if iTunes will recognize your iPhone.
    If your software is up to date then try here >  iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Ipod can not sync photos after iTunes upgrade

    I upgraded to iTunes 10.0.1.22 a few days ago. I plugged in my ipod and get the message, "ipod can not be synced. required folder can not be found" and after this message another, "...device cannot be found" I have not deleted or moved any folders.
    I have never had trouble with syncing my ipod before. What's different? any suggestions?

    if you guys own Aperture, a new update just fixed my issues.
    I didn't even think Aperture was an issue since I never selected to sync using aperture. But now my iPhoto options are not grayed out to select partial library options, and the full library sync finally shows my accurate 12.8 gigs of space in the colored device fill bar at the bottom of iTunes sync.
    Issue RESOLVED.

  • Issues after iTunes upgrade to 8.1

    I had my ipod plugged into my pc to charge it and shop in iTunes,I got a prompt to upgrade iTunes. So I started the upgrade,my iTune screen disappeared and my ipod showed a pic of the power plug and saying
    Connected
    Eject before disconncting
    I figure I should also state I had to do a system restore on my pc as after I restarted my pc like it said to, my pc crashed.
    So, anywho, What I want to know is it safe to unplug the ipod without ejecting it as I can not open iTunes as I keep getting this error when I click on the iTune icon?:
    ITUNES!
    The file"iTunes Library.itl" cannot be read because it was
    created by a newer version of iTunes.
    How do I fix these issues?

    Normally, you would recover the Library metadata from your backups of the database files (iTunes Library.itl & iTunes Music Library.xml). Or from specific XML files with archived Ratings &/or Playlists.
    If you have a previous iTunes Music Library.xml file from before your upgrade, you may be able to 'Import' it into iTunes and recreate some of your metadata.
    You may get lucky if you have a folder named 'Previous iTunes Libraries' located under the main iTunes folder. iTunes will make a copy of the ITL file prior to starting an upgrade. You may be able to use one of these to 'recreate' your Library as it was just before your last upgrade. From there, you may be able to just use it, or at least capture your metadata via some javscript apps.
    When you finally recover or rebuild your Library, invest some time in performing periodic Complete Backup of iTunes. Usually a very good thing to do prior to any upgrade of iTunes, or whenever you have materially changed your Library.
    Best of Luck

  • TS1453 after itunes upgraded to latest 11.0.2.26 apple tv (1st gen)does not show up anywhere in itunes

    After Itunes upgraded to latest version 11.0.2.26 Apple TV (1st gen) does not show up anywhere in Itunes

    I have the same problem. It was working fine up until the last update for iTunes 11.0.2
    Here's the details:
    I have an Apple TV - first Gen and up until a couple of weeks ago, was regularly playing sync'd iTunes music and videos through it on a daily basis.
    I see other devicess showing up in the "Devices" list in the left panel of iTunes (such as iPad, iPhone, etc.)
    AppleTV used to be there consistently, then disappeared upon update to 11.0.2
    Apple TV also does not show up in the devices tab under the Preferences window.
    I have tried multiple suggestions on the support forum but none have worked.
    Apple TV is able to access the network, is on the same network as the iMac with iTunes library connected. Both are connected to network via ethernet cable (not wifi). Both are able to access the internet (apple tv plays movie prieviews and gets updates). Using the Terminal app, I am able to ping the apple TV's IP number from the iMac and get a successful return. 
    Both have latest software downloads.
    I have tried cold-booting the apple TV, resetting the router, and verified in the router device list that both imac and appleTV are listed as active, un-blocked connections.
    I don't intend to buy an Apple TV 2nd gen or later (since I bought this one and it's not working now due to software update, what guarantee that a later model won't generate the same problem later.
    One last wrinkle, I have a 2 year old and a 5 year old who are jonesing hard for their "dance party" fix.
    Have you ever wronged a two year old?
    It is NOT pretty.
    Help me Apple-wan-kenobi...I can't take the screaming!

  • Performance issues after iOS4 upgrade

    hello everyone,
    I had notices few issues after I upgraded my iPhone 3GS:
    1- The screen is not rotating (when reading e-mails of flipping photoes).
    2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
    3- my Ipod is not working.
    4- I could not restore my device via the itune.
    my big question is there a real tangible benifit for this new upgrade?
    I really appreciate if you can help me soon
    thanks.

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Intel and IPhone Sync issues

    Some forwarded this to me. It might be relevant to some users here.
    "Senior Editor, iLounge
    Published: Thursday, November 5, 2009
    News Category: iPhone
    Intel has issued a comment concerning the iPhone sync issues some users are experiencing with certain PCs containing a specific Intel chipset. “Our leading theory is a BIOS or system configuration issue, but we are still investigating,” Intel said. The basic input/output system (BIOS) is the boot firmware run by a PC on startup, which identifies, tests, and initializes core system devices such as the graphics card, hard disk, and other hardware. As we reported earlier this week, the syncing issue appears to linked to Intel’s P55 Express chipset and its USB controller, which leaves the afflicted machines able to recognize the iPhone but unable to sync. The problem has been most prevalent among PCs running 64-bit Windows 7, but the issue has also been reported on machines running both 32-bit and 64-bit versions of both Windows 7 and Vista."

    Hi R@chel,
    It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    Specifically -
    Hi R@chel,
    It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    Specifically -
    Syncing manually
    If you prefer not to automatically sync content to your device, you can set up manual syncing:
    Connect your device to your computer and open iTunes.
    Click the Devices button in the upper-right corner. (If you're viewing the iTunes Store, click the Library button in the upper-right corner. The Devices button will appear.)
    In the main iTunes browser window, select the Summary tab.
    Select the option to Manually manage music and videos or Manually manage music. This will deselect the automatic sync settings for the Music, Movies, and TV Shows tabs.
    Click Apply.
    And -
    After following the steps above, you can add individual songs, videos, and playlists from iTunes to your device. To add content to your device:
    Select your device.
    Click On this Device.
    Choose Add to in the upper-right corner. If you drag a song, video, TV show, or movie while viewing the media in your iTunes library, a sidebar will show up on the right. You can drag your content onto the device. You can also create and modify playlists directly on the device.
    Thanks for using Apple Support Communities.
    Best,
    Brett L
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • I m using window vista32 after itunes upgrade.. itunes crash .. Problem signature:

    i m using window vista32 after itunes upgrade.. itunes crash ..
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          iTunes.exe
      Application Version:          11.1.4.62
      Application Timestamp:          52ddbf7a
      Fault Module Name:          ntdll.dll
      Fault Module Version:          6.0.6000.16386
      Fault Module Timestamp:          4549bdc9
      Exception Code:          c0000005
      Exception Offset:          00062086
      OS Version:          6.0.6000.2.0.0.768.3
      Locale ID:          16393
      Additional Information 1:          a183
      Additional Information 2:          96f68295953afa2675d1551e001cfa2f
      Additional Information 3:          5630
      Additional Information 4:          5482da5e28e2dc79b1d40bd90d8c9b

    Hello there, jasibrar.
    The following Knowledge Base article offers up some great steps for troubleshooting your issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    This additional article may prove useful to you as well:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • MacBookPro boot issue after iTunes update

    MackBook Pro showing disc utility after iTunes Upgrade. Instead of restart, I am seeing disc utility.I am not sure if my data is safe if I choose reinstall option. Does it reinstall OS without touching data?

    Sorry for the late update.
    The issue was with the McAfee encryption agent. If you have it on your MacBook Pro and by any chance you need to reinstall/ upgrade the OS, it will not allow it. I was stuck in the situation where it prevented any re-installation or roll back. The issue was solved only when I could get the HD decrypted by McAfee support and uninstall the agent through their experts. Only when the agent was removed, I could upgrade the OS.
    Thank you Gnomish8 for your response.
    Thanks,
    - Gaikwad GV

  • IPhone Sync issue (and album art messed up)

    Whenever I sync my iPhone with iTunes, instead of just updating the media I have changed, it will randomly add anywhere between 30 to 300 songs that were already on my iPhone. It doesn't cause any problems with using the iPhone other then the fact that it takes a really long time to sync even when I don't change anything or add new media to sync with the iPhone.
    So far I have:
    -made sure I have the latest updates of iTunes and all software
    -re-set iSync
    -done an archive and install
    -had a genius appointment at the Genius Bar at the Apple Store and
    -they replaced my iPhone
    ...but my problems still exist. And on top of that, all of the album artwork on the iPhone is jumbled up. It looks fine in cover flow, but when I switch to the normal mode it will be the wrong artwork with the wrong song. My album artwork in itunes is not jumbled up, but all of the artwork for the movies and tv shows I have bought and downloaded from the iTunes Store has disappeared and I can't get it back by searching for album artwork.
    So, to recap, my 3 main problems are.
    1) iPhone Sync issue
    2) Album artwork jumbled up on iPhone
    3) TV Show and Movie artwork disappearing on iTunes
    If anyone can help your time would be greatly appreciated. Thank you so much.
    Andrew

    Here are a couple of articles from the apple support website that might help out.
    http://support.apple.com/kb/HT1737
    http://support.apple.com/kb/HT1414

  • Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home.  Any suggestions on where to look to fix this?

    Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home.  Any ideas on how to fix this?

    That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
    You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

  • How do I get rid of lip-sync issues with iTunes 10.2.2.12?

    Hi Everyone.
    Firstly, a very Happy Easter!
    I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
    The system stats for my PC are at the bottom of the post.
    The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
    Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
    The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
    I suppose my main questions are:
    Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
    Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
    Is the spec (below) of my PC causing any issues.
    Here's an Easter Egg for anyone able to help!!
    All the best
    BandAidUK.
    System Information
    Time of this report: 4/24/2011, 10:13:44
    Machine name: DEREK
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Computer Corporation
    System Model: Dimension 8300              
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
    Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
    Memory: 3326MB RAM
    Page File: 1273MB used, 3941MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode
    Display Devices
            Card name: NVIDIA GeForce 6200 
         Manufacturer: NVIDIA
            Chip type: GeForce 6200
             DAC type: Integrated RAMDAC
           Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
       Display Memory: 512.0 MB
         Current Mode: 1280 x 1024 (32 bit) (60Hz)
              Monitor: Plug and Play Monitor
      Monitor Max Res: 1600,1200
          Driver Name: nv4_disp.dll
       Driver Version: 6.14.0012.6099 (English)
          DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
          WHQL Logo'd: Yes
      WHQL Date Stamp: n/a
                  VDD: n/a
             Mini VDD: nv4_mini.sys
        Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
    Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
            Vendor ID: 0x10DE
            Device ID: 0x0221
            SubSys ID: 0x02F3196E
          Revision ID: 0x00A1
          Revision ID: 0x00A1
          Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
    Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
             Registry: OK
         DDraw Status: Enabled
           D3D Status: Enabled
           AGP Status: Enabled
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run
    Sound Devices
                Description: Creative SB Live! Series
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
            Manufacturer ID: 1
                 Product ID: 100
                       Type: WDM
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                Other Files:
            Driver Provider: Creative Technology Ltd.
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 8000, 96000
    Static/Strm HW Mix Bufs: 64, 63
    Static/Strm HW 3D Bufs: 64, 63
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                   Registry: OK
          Sound Test Result: Not run
                Description: SoundMAX Digital Audio
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
            Manufacturer ID: 65535
                 Product ID: 65535
                       Type: WDM
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                Other Files:
            Driver Provider: Analog Devices
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 100, 192000
    Static/Strm HW Mix Bufs: 33, 32
    Static/Strm HW 3D Bufs: 33, 32
                  HW Memory: 0
           Voice Management: Yes
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: Yes, Yes
    Sensaura(tm) ZoomFX(tm): Yes
                   Registry: OK
          Sound Test Result: Not run
    Sound Capture Devices
                Description: Creative SB Live! Series
      Default Sound Capture: Yes
      Default Voice Capture: Yes
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                  Cap Flags: 0x41
               Format Flags: 0xFFF
                Description: Hauppauge WinTV 88x Audio Capture
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: hcw88aud.sys
             Driver Version: 2.125.28070.0000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/12/2010 09:47:58, 13440 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCC0
                Description: SoundMAX Digital Audio
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCCC
    DirectMusic
            DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
         DLS Version: 1.00.0016.0002
        Acceleration: n/a
               Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                      Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                      SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                      Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                      Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
            Registry: OK
         Test Result: Not run

    Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
    and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
    In List view, you can turn off every column (in menu View > View options) except track name.

  • HT201269 Bit of a tough one...I have a hard drive, iPod and iphone synced to an itunes on a computer that's been irreparably broken. Just bought a macbook pro and want to try and salvage everything onto the itunes on there. Any ideas?

    Bit of a tough one...I have a hard drive, iPod and iphone synced to an itunes on a computer that's been irreparably broken. Just bought a macbook pro and want to try and salvage everything onto the itunes on there. Any ideas?

    Yeah it seems to be fine although I'm a bit reluctant to fire it up with the Mac just incase. Thanks for the response btw

  • Performance Issues after an Upgrade

    Hello!
    We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
    1) What could be the causes/factors for the performance to degrade after an upgrade?
    2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
    3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
    Please let me know your thoughts on this.
    Thanks,
    - Krrish

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

Maybe you are looking for