IPhone taking a long time to Sync due to "backup"

So after installing 2.0 and some cool new apps, when I just try and sync to my PC it takes around 45 minutes because it runs a backup of everything.
Why is that?
Is it because I installed an app from the iPhone App store and then had to sync it with my iTunes ones that I installed? I've since removed the app that I downloaded from the iPhone app store and only have the ones I found through iTunes but it still takes a $*&# long time to sync becauase it's "backing up".
Any thoughts?
Is a Restore in order?
Thanks.

Noiseboy2006 wrote:
You can disable backups in terminal. The command is:
defaults write com.apple.itunes DeviceBackupsDisabled -bool YES
I think you can work out for yourself how to re-enable them.
how do you enter terminal?
also to re-enable: "com.apple.itunes DeviceBackupsEnabled -bool YES"?
or just erase?

Similar Messages

  • Taking a long time to sync

    iPod 80 GB taking forever to sync with iTunes library. Using OS X 10.7.

    I assume iTunes is up to date (10.7 is the latest version at the time of this writing).
    Are you plugging the iPod into a USB port located directly on the iMac versus via a USB hub? Perhaps it would help to try another USB cable as well to make sure the current one isn't faulty or damaged.
    B-rock

  • I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour

    I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour is this normal?

    The charger block is universal and is able to handle multiple votages.  One hour to reach 50% seems fine to me if the phone was completely flat to start with.  Just leave it on charge for as long as it takes to reach 100%.  I leave mine connected overnight all the time and it does not harm the battery

  • Restore from backup of my iphone is taking a long time

    Restore from backup of my iphone is taking a long time, so far about 12 hours! Is this normal?
    I updated to ios5 and all seemed fine, later I realised that my music wasnt on the iphone, so pluged back into my computer and it said that the restore of the iphone had not completed successfully (or something along those lines). I went to restore from backup and selected restore from a back up of my iphone. All appeared to be going ok with the time remaining coming down to less that 10 seconds now for the past 11 hours it has been increasing and now the time remaining is about 17 minutes!
    Anyone know whats happening? Or what I should do? If anything, or should I just leave it restoring??
    Thanks for any help.

    A bit late, but I wonder if a Reset would be enough? Or even just turning it off and back on?
    Phil

  • Discoverer reports taking a long time!!!

    Hi all,
    One of our clients is complaining that the discoverer reports are taking a long time to run for the last few days, the report used to take 30 minutes before but now is running for hours!!
    I have checked the SGA and I have killed the idle sessions but still there was no improvement in the performance.
    The version of BI discoverer is 10 and database also is 10g and the platform is win server 2003.
    I have checked the forums and they talk about explain plan and tkprof and other commands, but my problem is that i am unable to find the query that discoverer is running i mean once the report is clicked the query runs and gives the estimate time it would take. can some one tell me where this query is stored so that i can check this query,
    Also there were no changes made in the query or to the database.
    The temp space fills up 100%, i increased the size of temp space but still it goes to 100% also i noticed that the CPU utilisation goes to 100%
    i also increased the SGA but still no go.
    can someone kindly help me as to what could be causing this problem
    also kindly guide me to some good documents for tuning the discoverer.
    thanks in advance,
    regards,
    Edited by: user10243788 on Jan 4, 2010 12:47 AM

    Hi,
    The fact that the report used to work fast and now not can be related to many things but my guess is that the database statistics were changed and so the explain plan has changed.
    This can be done due to change in the volume of the data that crossed a level were oracle optimizer change the behavior but it can be other things as well.
    Anyway it is not relevant since it will be easier to tune the SQL than to find what have changed.
    In order to find whether the problem is with the discoverer or in the SQL extract the SQL as described above and run it in SQL tool (SQL Plus, TOAD, SQL Developer and so on).
    The best way to get to the problem is run a trace on your session and then use the TKPROF command to translate it to a text file you can analyze - you can assist your DBA team they should have no problem doing that.
    By doing that you will get the problematic statements/ functions/ procedures that the report uses.
    From there you can start working on improving the performance.
    Performance is expertise for itself so i'm sorry i don't know to tell you where to start from, I guess the start will be from understanding the meaning of the explain plan.
    Hope I helped a little although I wish Ii had a magic answer for you
    BTW, until you resolve that problem you can use the discoverer scheduler to run the reports in the background and so the users will get the data.
    Tamir

  • My external library 100 GB on a 2TB drive is taking a long time to open.

    Hey there,
    I recently moved my library to an external drive.  When I tried to load the external drive, it said it needed to repair and I let it happen overnight because it was taking a long time.
    Now it seems to just freeze when I try to load the external library.  Can someone let me know if there is something I can do to make this process speed up?  Should I move some of my projects to another library and keep it off-line?
    Thanks,
    Austin

    Could it possibly be due to videos stored in the aperture library?  I think one of the folders has multiple GB of video...  Just a thought.
    If Aperture is freezing on opening, this can be caused by corrupted or incompatible media, but it would not explain the original error message your reported - "permissions".
    When the repair finishes, try to launch Aperture with the Shift-key held down. This will defer the generation of previews. If media cannot beprocessed, Aperture will hang, when it tries to generate the previews for those images or videos. If you can get Aperture to launch after deferring the preview generation, you could open the Activity window (Window > Show Activity) and then selectively try to generate previews for your last imported images and videos  (Photos > update preview). The Activity window will show, what is currently processed, and perhaps you can spot, which of the files is causing the hang.

  • Restoring is taking a long time

    Restoring is taking a long time. What do I do

    Hey pjfrommendon,
    Thanks for the question. I understand you are experiencing issues restoring your device. The following resource may assist you:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT1808
    Additionally, if you are receiving an error message when attempting to update or restore, see the following:
    Resolve iOS update and restore errors
    http://support.apple.com/kb/TS3694
    Thanks,
    Matt M.

  • Taking snapshot of oracle tables to sql server using transactional replication is taking a long time

    Hi All,
    I am trying to replicate around 200 oracle tables onto sql server using transaction replication and it taking a long time i.e the initial snapshot is taking more than 24 hrs and it still going on.
    Is there any way to replicate those these tables faster?
    Kindly help me out..
    Thanks

    Hi,
    According to the description, I know the replication is working fine. But it is very slow. 
    1. Check the CPU usage on Oracle publisher and SQL Server. This issue may due to slow client processing (Oracle performance) or Network performance issues.
    2. Based on SQL Server 2008 Books Online ‘Performance Tuning for Oracle Publishers’ (http://msdn.microsoft.com/en-us/library/ms151179(SQL.100).aspx). You can enable the transaction
    job set and follow the instructions based on
    http://msdn.microsoft.com/en-us/library/ms147884(v=sql.100).aspx.
    2. You can enable replication agent logging to check the replication behavior. You may follow these steps to collect them:
    To enable Distribution Agent verbose logging. Please follow these steps:
    a. Open SQL Server Agent on the distribution server.
    b. Under Jobs folder, find out the Distribution Agent.
    c. Right click the job and choose Properties.
    d. Select Steps tap, it should be like this:
    e. Click Run agent and click Edit button, add following scripts by the end of scripts in the command box:
            -Output C:\Temp\OUTPUTFILE.txt -Outputverboselevel 2
    f. Exit the dialogs
     For more information about the steps, please refer to:
    http://support.microsoft.com/kb/312292
    Hope the information helps.
    Tracy Cai
    TechNet Community Support

  • SM59 - Remote Logon taking very long time - RFC is receiver

    Hi Friends,
    We have ABAP connection (SM59) to R/3 system from PI system.  The connection test is fine. But, when we click the Remote Logon from SM59, it is taking very long time. It is unable to login.
    Due to this, messages are in scheduled state in the receiver CC monitoring. (SOAP to RFC - Async ). Receiver RFC CC also are green.
    We checked with R/3 team, the remote user which is used in SM59 is not locked in R/3 system and password also not changed.
    Friends, kindly clarify why it is taking very long time from PI in SM59 when the connection is fine.
    Kind regards,
    Jegathees P.

    Hi Sabarish,
    I checked in SM58. There are no entries.  SM59 is for other interfaces (IDoc).  In the Message Monitoring all messages showing 'To be Delivered' and 'Delivering' from yesterday onwards. In the CC monitoring, it shows 'Message Processing Started' from yesterday onwards. But not completed.
    I checked in SM21 take log of type 'RD'.  I doubt is this the correct log for this problem.
    The specified operating system call was returned with an error.        |
    For communication calls (receive, send, etc) often the cause of errors
    are network problems.
    It could also be a configuration problem at operating system level.
    (file cannot be opened, no space in the file system etc.).
    Additional specifications for error number 146
    Name for errno number ECONNREFUSED
    Interprocess communication (e.g. TCP/IP) connection refused by partner.
    |This usually means that the necessary receiver program is not running.
    Kindly clarify.
    Kind regards,
    Jegathees P.

  • Taking a long time to recieve texts

    Hi, ive had my iphone 4s for about 2 months now. all been fine until past 2 weeks. im now taking a long time to receive texts. specifically sms messages. imessages seem to work fine. but it can take up to several hours before my sms texts come through.
    And i usually have to reboot the iphone to receive them and they all come at once.
    Cant be my signal because im usually in areas with excellent network coverage
    Ive restored my iphone twice, once last week and once today. still getting same problems.
    Any ideas??

    Can't tell you the exact time, but over USB 2.0 it should be maybe a minute or so. Certainly no more than a couple of minutes.
    12" PB, Mac Mini (x2), G3 iMac (x3), G4 iMac, G5 iMac, Centris 610, SE30, Mac+   Mac OS X (10.4.4)   3G iPod, iPod shuffle, iPod nano

  • Attachments taking a long time to download

    Hi, I wonder if anyone is experiencing the same problem. I've just got my iphone 4 and have noticed that when I download an attachment in mail it seems to be taking a long time to download. This is compared to my old 3g which downloaded them ten times faster when connected to my wi-fi. (granted, before i updated it to 4.0)!! Does anyone have a fix for this? Safari is fast compared to my 3g.
    Regards, Andy

    Hey Rebecca 94!
    You may need to check for sources of Wi-Fi interference if you are on a wireless connection:
    Wi-Fi and Bluetooth: Potential sources of wireless interference
    http://support.apple.com/kb/ht1365
    We also have another article that may help you make further sense of the situation:
    iTunes Store: Download times will vary
    http://support.apple.com/kb/ht1577
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Long time to sync ipod

    Hi,
    tearing my hair out with this ipod touch.
    just tonight whenever I connect my ipod to my pc running XP it starts to synchronise and takes about 3-4 mins. eventually it completes the sync but theres no way it should be taking that long, worked fine only a couple of hours ago.
    tried my USB slots on the front and on the back and its the same with all of them.
    after the initial sync waiting time, if I still have the ipod connected and click on the 'sync' button on itunes it does it at the normal time.
    all this is before I get the error messages saying that the 'device is not connected' but first things first.
    driving me mad.
    anyone else having similar problems?

    I am having a similar problem except on my Mac. My touch was working fine last night and today it takes a very long time to sync. I checked the Console and the following was being posted there over the course of the sync:
    2007-12-28 20:49:01.381 AppleMobileDeviceHelper[311] exception while performing selector allClients on server: NSInvalidSendPortException [NSMachPort sendBeforeDate:] destination port invalid
    2007-12-Dec 28 20:50:20 Sams-Computer MDCrashReportTool[436]: CFReadStreamGetError() returned: 1/60
    28 20:50:20.050|MDCrashReportTool|436:2684407808|CrashReportCopyX.m:-[CrashReportC opierPrivate _submitCrashReportFromPath:]| ERROR: Error 2 while attempting to submit /Users/Sam/Library/Logs/CrashReporter/MobileDevice/Dark Ice/MobileSafari-2007-12-27-093642.plist
    2007-12-28 20:50:20.067|MDCrashReportTool|436:2684407808|CrashReportCopyX.m:-[CrashReportC opierPrivate _submitCrashLogAtPathIfValid:]| ERROR: Error: failed to submit the crash log at /Users/Sam/Library/Logs/CrashReporter/MobileDevice/Dark Ice/MobileSafari-2007-12-27-093642.plist
    2007-12-28 20:5Dec 28 20:51:35 Sams-Computer MDCrashReportTool[436]: CFReadStreamGetError() returned: 1/60
    1:35.057|MDCrashReportTool|436:2684407808|CrashReportCopyX.m:-[CrashReportCopier Private _submitCrashReportFromPath:]| ERROR: Error 2 while attempting to submit /Users/Sam/Library/Logs/CrashReporter/MobileDevice/Dark Ice/MobileSafari-2007-12-27-093647.plist
    2007-12-28 20:51:35.058|MDCrashReportTool|436:2684407808|CrashReportCopyX.m:-[CrashReportC opierPrivate _submitCrashLogAtPathIfValid:]| ERROR: Error: failed to submit the crash log at /Users/Sam/Library/Logs/CrashReporter/MobileDevice/Dark Ice/MobileSafari-2007-12-27-093647.plist
    2007-12-28 20:Dec 28 20:52:50 Sams-Computer MDCrashReportTool[436]: CFReadStreamGetError() returned: 1/60
    52:50.064|MDCrashReportTool|436:2684407808|CrashReportCopyX.m:-[CrashReportCopie rPrivate _submitCrashReportFromPath:]| ERROR: Error 2 while attempting to submit /Users/Sam/Library/Logs/CrashReporter/MobileDevice/Dark Ice/MobileSafari-2007-12-27-095946.plist
    2007-12-28 20:52:50.065|MDCrashReportTool|436:2684407808|CrashReportCopyX.m:-[CrashReportC opierPrivate _submitCrashLogAtPathIfValid:]| ERROR: Error: failed to submit the crash log at /Users/Sam/Library/Logs/CrashReporter/MobileDevice/Dark Ice/MobileSafari-2007-12-27-095946.plist
    2007-12-28 Dec 28 20:54:05 Sams-Computer MDCrashReportTool[436]: CFReadStreamGetError() returned: 1/60
    20:54:05.071|MDCrashReportTool|436:2684407808|CrashReportCopyX.m:-[CrashReportCo pierPrivate _submitCrashReportFromPath:]| ERROR: Error 2 while attempting to submit /Users/Sam/Library/Logs/CrashReporter/MobileDevice/Dark Ice/MobileSafari-2007-12-27-095949.plist
    2007-12-28 20:54:05.072|MDCrashReportTool|436:2684407808|CrashReportCopyX.m:-[CrashReportC opierPrivate _submitCrashLogAtPathIfValid:]| ERROR: Error: failed to submit the crash log at /Users/Sam/Library/Logs/CrashReporter/MobileDevice/Dark Ice/MobileSafari-2007-12-27-095949.plist
    Dec 28 20:55:20 Sams-Computer MDCrashReportTool[436]: CFReadStreamGetError() returned: 1/60
    2007-12-28 20:55:20.079|MDCrashReportTool|436:2684407808|CrashReportCopyX.m:-[CrashReportC opierPrivate _submitCrashReportFromPath:]| ERROR: Error 2 while attempting to submit /Users/Sam/Library/Logs/CrashReporter/MobileDevice/Dark Ice/ResetCounter.plist
    2007-12-28 20:55:20.080|MDCrashReportTool|436:2684407808|CrashReportCopyX.m:-[CrashReportC opierPrivate _submitCrashLogAtPathIfValid:]| ERROR: Error: failed to submit the crash log at /Users/Sam/Library/Logs/CrashReporter/MobileDevice/Dark Ice/ResetCounter.plist
    I know MDCrashReportTool is used by Apple to submit crash details for mobile apps, so I am wondering if this is on their end. My internet connection works, and I have restarted iTunes, my Mac and the touch. Nothing has changed since yesterday, so I do not believe the problem is with me. Can anyone give me a clue if I'm headed in the right direction or provide a fix?

  • What's in the apple TV update that came out tonight?  It's taking a long time to load.

    What's in the apple TV update that came out tonight?  It's taking a long time to load.

    Apple TV Software Update 5.2
    Feature
    Summary
    iTunes in the Cloud
    Browse and play your purchased iTunes music directly from iCloud. This feature may not be available in all countries.
    Bluetooth keyboard
    Use your Apple Wireless Keyboard to control your Apple TV. See this articlefor more information.
    AirPlay audio for videos
    Send stereo audio from movies, TV shows, and other videos on Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs).
    Stability and performance
    Includes general performance and stability improvements.
    If it's taking awhile to load it could be due to slow network speed or interference. It's around 600MB. If on ethernet, some have reported issues, try wifi.

  • Why are my apps taking a long time to update both on my phone and iPad?

    Why are my apps taking a long time to update both on my phone and iPad?

    Hi ariasm21,
    Thanks for visiting Apple Support Communities.
    If the App Store on your iPhone seems unresponsive or app updates are not completing, try the steps below.
    First force close the apps using these steps:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app's preview up to close it.
    These steps come from this article:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Next, restart your device:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Try updating an app again. If the issues persist, you may want to troubleshoot your internet connection next:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    All the best,
    Jeremy

  • Discoverer report taking too long time to open.

    HI,
    Discovere reports are taking too long time to open. Please help to resolve this.
    Regards,
    Bhatia

    What is the Dicoverer and the Application release?
    Please refer to the following links (For both Discoverer 4i and 10g). Please note that some Discoverer 4i notes also apply to Discoverer 10g.
    Note: 362851.1 - Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362851.1
    Note: 68100.1 - Discoverer Performance When Running On Oracle Applications
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=68100.1
    Note: 465234.1 - Recommended Client Java Plug-in (JVM/JRE) For Discoverer Plus 10g (10.1.2)
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=465234.1
    Note: 329674.1 - Slow Performance When Opening Plus Workbooks from Oracle 11.5.10 Applications Home Page
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=329674.1
    Note: 190326.1 - Ideas for Improving Discoverer 4i Performance in an Applications 11i Environment
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=190326.1
    Note: 331435.1 - Slow Perfomance Using Disco 4.1 Admin/Desktop in Oracle Applications Mode EUL
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=331435.1
    Note: 217669.1 - Refreshing Folders and opening workbooks is slow in Apps 11i environment
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=217669.1

Maybe you are looking for