Iphone teethering through usb on windows 7 64bit

cant seem to get this to work atm
Windows 7 Enterprise 64bit
Itunes 10.6.3.25
iPhone 3GS
iOS 4.2.1
firm 05.15.05
sharing on, wifi connected on the phone and working but on the computer its just "network cable unplugged"
i have done this
rebooted
disabled and enabled the network driver and usb driver
Tested both usb 3.0 and 2.0
anyone experiencing the same or has some tips to try out?

tethering might be the wrong word to use
wifi -> phone -> usb -> PC

Similar Messages

  • TS1373 how can i connect my iphone to computer through usb using windows 8?

    how can i connect my iphone to computer through usb using windows 8?

    If iTunes is installed, you just connect the iPhone to USB.
    http://support.apple.com/kb/HT1386
    You can also sync to iTunes using WiFi.

  • Can only sync iPhone/ipad through USB now not WiFi -  help please?

    can only sync iPhone/ipad through USB now not WiFi -  help please?

    Hi Iron Tommy,
    If you are having issues syncing your devices to iTunes via WiFi, you may find the troubleshooting steps outlined in the following article helpful:
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    http://support.apple.com/kb/ts4062
    Regards,
    - Brenden

  • Iphone 4s icon missing from windows 7 64bit

    when my iphone 4s is plugged into my computer running windows 7 64bit, the apple icon doesn't show up.  instead, a generic camera icon shows up.  is there a way to fix this?
    thank you!

    Possibly. The only thing I could think to tell you is to Google and find an icon you'd like to use, and then navigate to c:\\windows\\system32\\Shell32.dll (back this file up immediately) then use a program like 7zip to extract all of the contents, put your custom icon in and rename it what the default portable device icon is named (you'll have to rename that one something else first), and then re-compress the whole package and paste it into the system 32 folder (make sure it is named the same thing as the original dll, and then it should give you that pop-up window, click replace) and then hope it works. If not, get rid of the modification immediately and replace it with the original, so as to not induce a fatal exception and blue-screen your PC.

  • Ipad 3 / Iphone 4S not recognized in Windows 7 64bits.

    Hi, my Ipad 3 and my Iphone 4s are not detected by windows 7 64bits. They are detected via Itunes, and work properly, but i can't acces them directly via "computer".
    There are no drivers installed, and i can't install them manually. I tried to uninstall / reinstall itunes, i also made sure Apple Mobile Device was working properly,
    Any idea?

    Google it

  • Iphone internet through usb

    Is there a way to connect my iPhone to the Internet through the USB cable?
    I have an ADSL Internet connection, and cannot figure out how to connect to the Internet from my iPhone through the USB cable (supplied with each iphone).
    Thanks

    If you get a wireless router to create a wi-fi or wireless network at home with your wireless router connected to your ADSL modem (which will be connected to the modem via Ethernet), you can access your ADSL internet connection via wi-fi with your iPhone.

  • HT201569 i am not able to charge my iphone 6 through USB Power Apater till it hits 20% of battery remaining..any issue with iOS8.1.1 or it's usual to iphone

    HI ,
    I recently bought iPhone 6 & updated to the latest version of iOS 8.1.1. My problem is am not able to charge my phone with USB Power Adapter till my battery % remain to 20%. If it is more than 20% power adapter will not work. But i can charge through my laptop.
    Please suggest, how to change the settings.
    Thanks
    Charu

    Hi,
    That should not be happening. Maybe you should take it back to where you bought it.
    Download and read the User Guide at this site: https://itunes.apple.com/us/book/id917482340
    Good luck.

  • IPhone restore through itunes in windows xp sp2 not working

    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Hewlett-Packard HP Compaq dx6100 MT(PQ674PC)
    iTunes 11.1.3.8
    QuickTime 7.7.4
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0012B5980E0E9DE8
    Current user is an administrator.
    The current local date and time is 2014-01-03 17:34:37.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel(R) 82915G/GV/910GL Express Chipset Family
    Intel(R) 82915G/GV/910GL Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.3.8 is currently running.
    iTunesHelper 11.1.3.8 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {5B993F11-8BF9-4E8F-B4F2-330410EF70B7}
    Description:            Broadcom NetXtreme Gigabit Ethernet - Packet Scheduler Miniport
    IP Address:             192.168.1.26
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      No
    DHCP Server:         255.255.255.255
    Lease Obtained:     Thu Jan 01 05:30:00 1970
    Lease Expires:       Thu Jan 01 05:30:00 1970
    DNS Servers:         192.168.1.1
                                    218.248.240.179
                                    192.168.1.5
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2014-01-03 17:32:04.

    Connection attempt to firmware update server was unsuccessful.
    Network timed out cause something is blocking you. My guess the same something disabled your Windows Firewall, but it also could be you did it yourself.
    Disable all your antiviruses, check your host file, uninstall antiviruses if disable does not help.

  • While charging through usb port i am getting small shock at the edges of my iphone 5??why is this?

    I am getting small shock when charging my iphone 5 through usb port?why is this??any solutions??

    Bring the phone and USB cable to Apple for evaluation

  • How to disable Notification sound on windows 7 after I connected iphone 5 by USB?

    Just got my iphone 5, everything was fine until this afternoon. I connected the iphone 5 by USB to windows 7. Now windows 7 will make the same notification sound when my iphone 5 got a email, sms, whatever notification it going. It is so annoying and it did not happen before. Anyone know how to disable the notification sound on windows 7 side? Thank you

    Just got my iphone 5, everything was fine until this afternoon. I connected the iphone 5 by USB to windows 7. Now windows 7 will make the same notification sound when my iphone 5 got a email, sms, whatever notification it going. It is so annoying and it did not happen before. Anyone know how to disable the notification sound on windows 7 side? Thank you

  • TS1538 after download iOS 7.1 when i run iOS 7.0.1 iphons4s i lost connection with itunes and i cant start my iphone?windows 7, 64bit iTunes 11, iphone 4s

    Downloading iOS 7.0.1 when i start intall i lost connection with iphone and iTunes at my windows 7,64bit. now my iTunes dont find my phone and my windows divice manager show Apple Mobile Device (recovery mood) . how can i start my iphone?

    Hello saimunkhan
    Start with trying to put in your iPhone into recovery mode and then plug it in to iTunes and then follow the steps to restore it. If in recovery mode and still not getting anywhere, check with the article that you came from to troubleshoot it further.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not read iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

    I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

    problem solved.
    I phone 4s screen froozen

  • I updated my iphone 5 through Itunes but an error occurred during installation on the phone that read -42110. Now the phone has a usb icon and itunes icon and is not recognized by itunes or my computer (windows 7). I uninstalled and reinstalled. no luck

    I attempted to update my iphone 5 through itunes. Itunes backed up the phone. However, when it tried to install the updated software an error message displayed -42110. Now the iphone is unresponsive with a usb icon with an arrow pointing to an itunes icon. The computer makes a connection noise when I hook the phone to the computer but it does not appear to be recognized. It does not appear in the My Computer section. Itunes does not recognize it either. I disabled my security software. I uninstalled itunes, Bonjour, Quick time, apple updates, Aplle mobile updates ect. I reinstalled Itunes and the program still does not recognize the phone.

    If you uninstalled and reinstalled iTunes, did you follow the steps in this support document http://support.apple.com/kb/HT1923 exactly. Check and make sure.  If you did, then try this support document to get the phone into the Recovery mode. It may take more than one try. http://support.apple.com/kb/HT1808

  • Home Sharing will not work with my Windows 8 64bit with new itunes.  All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App.  They all did before.  Only thing that has changed is new PC/itunes.  Any Ideas?

    Installed a new Windows PC on my home network.  PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit.  My itunes works, but I can not get Home Sharing to function now.  None of my Apple TV's can see my computer library and prompt me to turn it on.  All of my iphones, pods, pad, can not use the "Remote" app.  When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code.  I have reloaded iTunes, reset my router, updated all devices.  You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to.  Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before.  However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV.  Growing fustrated.  Any ideas, would be helpful.

    Cunning1_
    You are a legend!!  I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!!  I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!!  Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
    Whatever - one step and now I can enjoy my music through my house again!
    Thank you, Thank you, Thank you 

  • How do you access files from an external harddrive connected to TC through USB from iPad or windows computer?

    How do you access external hard drive data that is connected to TimeCapsule through USB from iPad or knows based computer?

    Filebrowser for the iPad does this very well.
    FileBrowser - Access files on remote computers for iPhone, iPod ...
    Cannot help on Windows, but another PC guy might be able to answer. Some possible clues here:
    http://support.apple.com/kb/HT1331

Maybe you are looking for

  • Processing finished in server proxie

    Hello Experts, i have a file to server proxy scenario. after server proxy has finished his job i have to start an report on the business system. is there any way to figure out when message processing to server proxy is really finished?? Quality of se

  • Can't connect to anything on the network

    Since yesterday, I'm unable to access any of the shared Macs and Servers on our network. I wasn't aware of making any changes that might have triggered this, like doing a software update. Here are the symptoms: In the "Network" pane, when I click on

  • How i make the partitions in my hard and when make recovery windows not deleted

     i hope find solution for it i have windows 8 recovery in my laptob that have harddisk 1000 gigabite  i want make the (c) partion and the recovery partion and 1 other partion i make it but when i make the recovery the windows back my partions to the

  • Internal commit

    Hi, Is there a way to commit a single database operation, outside the main transaction? I want to perform a commit inside of a function module without confirm the caller program's luw I tried to use STARTING NEW TASK, it works, but there is a session

  • Compc task

    hi i use compc task to compile mxml files. the ant build file is <target name="appcompile">             <compc                 output="${catalina.home}/webapps/${app.name}/CampusPage.swf">                  <compiler.library-path dir="${FLEX_HOME}/fra