IPhone tethering xp network disconnected

Hello
iTunes 10 successfully installed. iPhone drivers in stall ok and iTunes detects. Usb tethering on. No tethering notification on phone. Windows xp dispays " network cable disconnected" for the tethering connection in the connections panel in xp. Any ideas?

i posted a similar question, but in general, not specifically in regards to windows, but to many operating systems.
Message was edited by: Dutty Persian

Similar Messages

  • IPhone settings for Network for tethering

    I accidentally deleted my iPhone from the Network on my macbook system preferences. How can I add it again so I can use the tethering, because it isn't finding the USB and also isn't connecting to the Bluetooth.

    paul Heinemann wrote:
    ok, well maybe the tethering button should be goon, but bluetooth is still jacked
    If you did not pay for the plan, you may have made it work one time, but your provider may have detected TCP and UDP ports not normally used by a phone, opened by your tethered computer. This may have disabled your tether capability.. Besides, paying for a tether plan not only increase your limit, but also open up all the other ports except port 25 to allow your computer to access the net better.

  • Missing TCP/IP settings for iPhone tethering (Bluetooth and USB)

    Is it just me or Apple has completely disabled the TCP/IP settings for BT and USB connections for iPhone tethering (and possibly any other mobile devices)?
    I can now only set the IP addresses and DNS server. No Proxies or WINS settings tabs.
    I have also noticed that if you setup a USB tethering connection in Leopard and upgrade to Snow Leopard, the settings are still available, but NOT if you make a clean install of Snow Leopard and create a new iPhone USB tethering connection.
    I always use a SOCKS5 when I'm using my tethering connection for security and better/faster connection with my manual proxy server setup. I find the new "options" in SL very limited, not only for my usage.
    Screenshot here:
    http://macblog.sk/files/pictures/snowleopardiphone_tethering_connectointcp.png
    Message was edited by: DominikB

    I got this to work again (in fact, I'm tethered right now
    Here are the steps I followed:
    1) Upgraded to iTunes 9
    2) Upgraded iPhone to OS 3.1
    3) Removed device from Bluetooth Devices list on my MBP
    4) Removed Bluetooth PAN from Network preferences
    5) Restarted iPhone and MBP
    6) Set-up iPhone as a Bluetooth Device on MBP
    7) Enabled tethering on iPhone
    8) Connected to iPhone network via the Bluetooth icon on my MBP menu bar
    9) Verified that the blue "Internet Tethering" bar was on the iPhone
    10) Manually added Bluetooth PAN to my MBP network preferences (connect show as yellow, "IP cannot be assigned" message)
    11) Opened the Advanced pane and clicked the "Renew DHCP Lease" button
    12) IP was assigned!
    I'm not sure if the first two steps contributed to the solution or not, but these are the steps that worked for me.
    Good luck to you all...

  • [NSFileHandle][Sockets] How to manage a network disconnection?

    Hi,
    I have built a client/server app that communicates via TCP/IP.
    The *Client is an iPhone Application* that receives and sends many messages of variable sizes through a NSFileHandle object linked with a socket as its filedescriptor
    I catch *incoming bytes trough an Observer* whose matching message is named "DataAvailable:(NSNotification *)aNotification".
    *When the server stops*, the observer receives one last "dataAvailable" notification, which I try to manage with the [NSFileHandle readdataoflength:1]... that throws an *exception indicating the +connection has been reset by peer+* , which I catch and manage through a SocketDidDisconnect: homemade message.
    But I have a *problem when the disconnection occurs directly because of a network disconnection* (I did disconnect the network on purpose) : I receive *no "DataAvailable" notification* (although it receive one I just close the connection from the server Application).
    Then I thought I could check every 1/10 seconds if my connection was still ok by trying to do a [MyNSFileHandle ReadDataOfLength:0] : that would throw an exception as soon as my connection goes down. But obviously, reading 0 bytes does not have any effect. And since I don't wanna loose the queued incoming data by various random reading, I don't know how to detect such a network problem.
    If any of your has an idea about *how to manage a network disconnection with a NSFileHandle without involving the random reading of queued incoming data*, I will listen to you with the greatest interest.
    Thank you for reading till the end.

    Looks like it will be of some help, yes.
    But I don't have time to test it today. I'll tell you as soon as I have tested it.
    Thanks anywa for your help

  • HT201210 There was a problem downloading the software for the iphone "moh" The Network connection timed out.

    Hi
    I am trying  to  restore   my iphone 4 iOS 5.1.1 uding itunes the  latest version update. but always I am disconnected in the mid of the process sometimes an  getting  the  message :
    There was a problem downloading the software for the iphone "moh" The Network connection timed out.
    make sure your network setting are correct and your network connection is active or try again later.
    I  have  Internet  speed  of  12MB. and have  changed  different  USB cables and  laptop with Intel Core i5 .
    Is there any  one has  any  idea???

    i tried itunes in different computers and itunes recently installed .
    the issue that the  restore  never completed always freeze in the middle and giving the above note.
    There was a problem downloading the software for the iphone "moh" The Network connection timed out.
    make sure your network setting are correct and your network connection is active or try again later.
    Is there a way  to refresh the restoring update in itunes  ???
    in case  they proxy  or  Antivirus issue  it  suppose not not  to  start the  restoring  process  at  all Is not ???
    but  in  my  case  always start  as normal  then freez  ........ 
    any  other suggestion

  • After sing in with VPN from iphone, it had been disconnected unexpeted

    Hi folks,
    Anyone had experience the VPN been disconnected after sign in with only few seconds ?
    What should I suggest our enterprice MIS to change with our Cisco VPN system ?
    Many thanks

    If the iPhone changes its network (3G / Edge / WiFi) then I noticed that it will loose its VPN connectivity. If you're in an area where, say, 3G is patchy; you might want to turn off 3G to ensure that you stick with Edge throughout the session. Better still, sit on top of your router and use WiFi.
    Now all I have to work out is "what do I need VPN for" given that I can't run the activeX required to actually do any work! Any suggestions (other than bragging rights in the pub ... to an incredibly small and geeky audience)?

  • Can I share wifi connection through iPhone tethering (instead of 3G)?

    Hi,
    when overseas, I don't have tethering (I have a US-only plan).
    However, I am able to join wifi hotspots with a global login, plus my work based encrypted network. I cannot get my iPad or Macbook onto those networks directly.
    Can I join a wifi network with my iPhone, then have other devices tether to that wifi internet connection?
    Thanks!
    edited for formatting.

    No.
    Tethering is for sharing the iPhone's internet connection via the iPhone's cellular network only with a computer or device.

  • Iphone Tethering Problem

    I cant seem to get the iphone tethering option working. All the instructions i have read so far say to go to Settings>General>Network>Internet Tethering. This so called "Internet Tethering" menu does not seem to show up on my iphone 3G. I have downloaded the new 3.0 software. I also have read several people who had this same question, but have not seen a clear answer. Is the problem with AT&T, or with how my settings are set up?

    It is currently hidden by the profile installed on US iphones, but it is included in the 3.0 firmware. You cannot unlock it without violating you terms of service agreement with ATT and we cannot give those directions here. Hopefully, ATT will make it available soon so we can legally tether.

  • I have an iphone 4. I disconnected it from my iTunes account but I am still using the iphone and the Apple ID. If I make a purchase will it work? Also, how can I reconnect my iphone to my Apple ID?

    I have an iphone 4.
    I disconnected it from my iTunes account but I am still using the iphone and the Apple ID.
    If I make a purchase will it work?
    Also, how can I reconnect my iphone to my Apple ID?

    Do you mean that you removed the phone from the 'manage devices' section of your iTunes account ? If you do then that won't stop you being able to purchase items on your phone - you only need to be logged into an account to be able to purchase with it.
    If you do mean the 'manage devices' section then you can associate, or re-associate, a device (or computer) by using iTunes Match, or automatic downloads, or redownloading past purchases on it : http://support.apple.com/kb/HT4627

  • Hi there can help me to unlock the my iphone from telstra networks

    hi there,
    i've asked Telstar for unlock my new iphone from their network because i'm going overseas, they told me it's was done and i have to wait for 72 hours, after that connect my iphone to itunes and restored.
    i have done everything but still have problem with my new overseas sim car,
    can you help because i need my phone

    No one here can help you.
    You need to talk to Telstar.

  • HT4356 I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Read through this for information about Airprint printers and how to use them:
    http://support.apple.com/kb/ht4356

  • I am trying to download an update for my iphone, but in the middle of the download I get an error message that says, 'There was a problem downloading the software for iphone. The network connection timed out.' Any ideas on how to resolve this issue?

    I am trying to download an update to my iphone, but in the middle of the download, I get an error message that reads, 'There was problem downloading the software for the iphone. The network connection timed out'. Any idea how to reslove this issue?

    Hi Robertfrom Denver.
    Did you try the solution given, and if yes, did it work?
    I have done several "attempted downloads, and see the full file download, typically taking 30 minutes to complete, and then something goes wrong.
    I am happy to suspend AV and FW software, but would like to know if it is a good fix or not first?
    HelenfromBroughton Astley

  • Hello! I want to unlock your iPhone 4s cellular network for travel to Europe. How to do it?

    Hello! I want to unlock your iPhone 4s cellular network for travel to Europe. How to do it?

    Only the carrier to which it is locked cna unlock it.  Contact that carrier and ask if they offer that service and if you qualify.

  • How to add iPhone USB to Network Interface on iMac? Please help.

    Hi,
    I've been trying to find a solution of the past few days to no avail. I've accidentaly deleted iPhone USB from network interface (by pressing minus sign) and now my iMac won't see it. I wanted to tether via USB, but it was red before, and then I deleted it at all iTunes sees it and syncing is working, but I can't tether now. I've got iTunes 11.1.2 and newest iOS for iPhone 5S.
    Thank you in advance!

    Anyone?

  • TS1814 "There was a problem downloading the software fot the iphone. The network connection timed out.there's no pblm with my connection but this error keeps on showing,  what to do?

    "There was a problem downloading the software fot the iphone. The network connection timed out."
    there's no pblm with my connection but this error keeps on showing, 
    what to do? please help....

    Stop with the silly and pointless fonts.
    A simple search of the forums for the actual error would have revealed the resolution.
    Temporarily disable all security software on the computer.

Maybe you are looking for

  • Lightroom 4 custom crop boundary area display

    We post hundreds of sports photos at a time.  We set a custom crop 7.5x10 which most closely enables all our supported print aspect ratios (4x6, 5x7, 8x10, etc.).  We have to be careful that the important photo elements are NOT in the boundary area i

  • BP Transport Acknowledgement problem...

    Hi, In, XI3.0 stack 11, Business process have two SEND STEPs one for PO and another one for GI and the required condition is GI idoc should get posted only after posting PO idoc. As of now I have put transport acknowledgement in the first send step s

  • XI integration

    Hello every one....           As doing web log scenario..BW-XI integration( how to send XML data to BW from XI ). I configured all the steps in that web log..but final step is not woking eventhough i created html file nad xml file as per the web log

  • IPhoto vs. Aperture

    I am interested in purchasing one or both. What are the differernces? I can't seem to find any answers on this and I live 150 miles from a Apple retail store. Please and thanks! Lundgren5

  • Adobe LiveCycle Connector-2013

    Bonjour, J'ai téléchargé la version trial de Adobe Livecycle ES4, et je tente de paramétrer l'ECM connector pour Sharepoint 2013. Dans la documentation < lc_upgrade_jboss.pdf >, je trouve une référence à < Adobe LiveCycle Connector-2013.zip >, qui se