Iphone times out and loses wep
I enter my wep and iphone connects to my home network. once I phone turns off automatically and I go to turn it back on, it shows the network available, and secured. when attempting to connect to it, it states it is not able to connect. I then have to reenter the wep each time. What gives.
Thanks for the reply. I have tried the forget this connection when it won't connect. When I do this I can get it to connect until the unit shuts off. Today when I get the cannot connect, I repeatedly tap the connection and get the cannot connect screen but after several times it finally has connected. It also has nothing to do with signal strength as it is full signal.
Thanks everyone.
Similar Messages
-
I have a song that I purchased from Itunes on my Iphone and there was an error downloading. Every time i try to download it times out and says to try again. I have tried several times and still get same message. Help? I have been charged for this song but have not been able to download.
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help
Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/ -
HT1386 iPhone times out during iCloud restoration
My iPhone times out during syncing with iCloud
Hey PLabrozzi,
Has iTunes displayed an error message when syncing the iPhone? If so reply with the exact error.
Make sure the iPhone is directly connected to the computer and not plugged into the monitor, keyboard, or a hub.
This article has some general tips for a similar issue that may resolve this issue.
http://docs.info.apple.com/article.html?artnum=301267
Jason -
I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?
I have just installed 10.7 and bootcamp is no longer visible on my desktop, nor can i start computer in windows mode. I started the bootcamp 4.0 upgrade assistant, but don't want to wipe windows 7 out and lose my data. Any suggestions?
-
My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. In the past when I have updated successfully, the spinning circle would show me an indicator of time left on the update. I no longer have this Indicator. The circle just spins and times out and nothing happens. I've reset the iPad in the settings menu, reset the router, logged in and out of Apple id, powered ithe iPad off and on, and tried a couple other "fixes" that I've read online. So far no luck. AAny help would be greatly appreciated. Much thanks!
How much free space do you have? If it is low, installers may not be able to run properly.
-
Just bought the ipad4 and can't log into facebook. Times out and tells me to check my network connection. Anyone having the same problem or any ideas?
Hey barnsieno10,
Thanks for using Apple Support Communities.
Looks like sign in issue, This article is a great resource for the message you are receiving.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
Have a nice day,
Mario -
Process chains time outs and hangs with no error msg - in SP13
Hi all,
We are having all kind of weird problems after we patched our system with SP13. Our process chain time outs and hangs, but surprisingly we never get any error msg. And scarier part is, the problem seems to be intermittent. PC runs fine on some days and hangs on some.
Further analysis into the dump as below
Termination occurred in the ABAP program "SAPLRSSM" -
in "RSSM_SLEEP_DEBUG".
The main program was "SAPMSSY1 ".
In the source code the termination point is in (Include) program "LRSSMU39".
This refers to an issue that appears to have been addressed by OSS Note
934648(meant for SP8). This notes also indicates to populate RSADMIN table to
exclude "RSSM_SLEEP_DEBUG". Not sure if this note is valid for SP13? However we went ahead and populated the RSADMIN table.
So now we have no clue whats going on and where to fix the issue.
As per SAP suggestion we applied the following notes:
0000653996 Analyzing lock situations
0000893563 Correction: Deadlock on completion of a remote chain
0000994007 Corrections: Deadlock with external status query
0001005481 Correction: Process successful, but there is no instance
0001047174 Correction: Incorrect scope when locking in process chains
0001051957 Correction: TIME_OUT during dialog confirmation of processes
0001083660 Report for error stack analysis
Nothing seems to help us. And SAP suggested a few options, which we implemented to no rescue.
Im sure that many of the customers have applied SP13, and want some feedback from them, if this is happening in their systems too?
If so, how did you fix this issue?
Or this situation is unique to us?Please note that no settings were changed as of SP13 to that of what they were in SP12(unless it is a side effect of the patch itself). Everything worked fine with SP12 and is still working on the BIP system. All the problems are in BIQ patched to SP13.
Any pointers or insight would be appreciated. We have a customer msg open with SAP, and going back and forth, but nothing seemed to work as of today.
Thanks,
VoodiNot sure which OSS helped us get past the issue, as SAP asked us to apply a ton of notes. But along which the notes, SAP has some suggestions for us, which we think did the magic. After the implementation of the suggestin we never faced the same issue again. The suggestion by SAP:
move the process chain callback in a batch job by executing
program RSSM_TRACE_SWITCH and selecting the flag "verifcation
of asynchronous processes - execute in batch".
Lemme know if this doesnt fix the issue, I can give all the notes that SAP asked us to apply.
Message was edited by:
voodi -
i had to restore my iPad mini and when I go to the App Store to reload some of my apps it times out and doesnt reload them. Any suggestions?
Close the App Store app and reset your iPad.
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
In order to reset your iPad, hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears on the screen after which time you can release the buttons and let the iPad start up.
IF that didn't help, try turning WiFi off on your iPad in the Settings, restart the iPad, then turn Wifi on again. -
have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help
Check in "System Preferences">"Energy Saver" to see if you have the "Computer Sleep" bar set too low.
-
Airport times out and have to restart
airport times out and have to restart constantly
I have exactly the same problem. It started a few weeks ago and the helpline could not work out the problem, so they sent me a new HUB 2.0. Ever since, the broadband connection keeps stopping every day several times a day, which is a real pain as I work from home.
I've just ran InSSider and there are two NETGEAR SSIDs on the same channel as mine (11). Would this affect / be part of problem? There are other SSIDs on channels 1,6,7 and 13. Not very techie, so would appreciate very basic advice! -
my iphone blanked out and will not cut on i tried holding the power button and the home button any advice?
Hey there mello12,
It sounds like you are not able to turn on your phone. You should use these steps in the following article to help resolve it, or setup service if needed:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
Take care,
Sterling -
I can see my Canon MP600 usb connected to Airport Express through Bonjour on my Windows XP. But, when installed by Bonjour, the printor time-out and can't print anything. Any idea what to do?
Thanks for the quick reply.
So am I correct in saying trying to utilise the Airport Express to access the printer over the network was a wasted effort due to the latest iOS? I had read up on the express before purchase and believed that was one of it's main purposes.
Thanks again for the help. -
If I try to send Mp3 files over e-mail using Firefox..it times out and says 'Encountered an error. I have these MP3's compressed to under 1 MB..like 756kb..so size is not an issue. No problem when I open my e-mail in Safari
Hi petro_jemes,
Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
I hope this helps. -
Authentication time-outs and delays
hello
we have got a scenario which our enterprise environment discovered as authentication time-outs and delays , the all authentication is NTLM only , we also using many devices such as smartphone and other moiled components ,any option or way to get fix
that kind of issue
thanks in advanced
ivan bikmbauerOn Mon, 25 Aug 2014 11:37:47 +0000, Shuki Noy wrote:
ask me security question
but ask something very complicated
This has nothing to do with your technical knowledge, the issue here is
that you're artificially attempting to increase your forum points by
creating fake profiles, posting "questions", posting responses using your
own profile and then using the fake profiles to mark your own responses as
"answers".
I am not going to continue this discussion in the forum as it is off-topic
and wastes everyone's time.
I notice that you didn't answer my questions about your TechNet Gallery
contributions.
If you want to continue this discussion then you can do so over email. My
email address is pkadare @ gmail.com
Paul Adare - FIM CM MVP
"Quoted-Printable: a standard for mangling Internet messages
Quoted-Unreadable: the result of applying said standard
Unquoted-Unprintable: the comments from the recipients of the above" -- bf8
Maybe you are looking for
-
My computer wont power up. I have unplugged it for 30 min. and replugged and it still will not power up. I cant get an service appt until Tuesday. Is there something else I can do?
-
Hi gurus....... My client wants following scenario to be mapped in SAP. My client gives raw material to his subcontracter. Then subcontractor makes processes on that and make finish product and then that subcontractor directly supplied finish product
-
For all items in Production Order, Base Qty column multiply by Planned Quantity field at top (a constant field) equal to Planned Qty column. However, certain items in one production order shows different Planned Qty, the numbers don't add up. I looke
-
Hey All, This batch file works: d:\oracle\BIToolsHome_4\bin\dis51usr.exe /connect userid/password@database /opendb BatchTest /sheet 2010 /batch /export HTML d:\batchtest but this one does not: d:\oracle\BIToolsHome_4\bin\dis51usr.exe /connect userid/
-
I would like to offer my users the ability to perform a "keyword" search which would allow the user to search about 90% of the fields in the xml file. What is the best way to do something like this. I currently have each field in my query seperated b