Iphone trouble
My iPhone showed a message
iphone is disabled
connect to itunes
Question is
How to enable my iPhone again
email
[email protected]
Thanks
If the phone will not turn on at all, there are only a couple things you can do.
1. Plug the phone into the wall charger and give it at least 15 minutes to charge before you try to turn it on.
2. If it still doesn't turn on, try a reset by holding the Home and Sleep/Wake buttons simultaneously for about 6-8 seconds. Hopefully, an Apple logo will appear and then the phone will start up.
If these things don't work, you need an Apple Genius Bar or 1-800-MY-iPHONE.
Similar Messages
-
IPhone TROUBLE!!!! WHY ME???
ok i am usually not one to complain about apples products but this is rediculous it might be a simple fix but whatever.MY iPhone 3G has been having a few problems but it all has to do w/ calling.Here they are ill even make a list.
1.When my phone rings the whole ringtone never plays.
2.When i answer my phone its almost always a missed call.
3.When im talking on it the screen shuts off and does not turn back on till i put it to my face. This makes it hard for me to do anything while im talking.And they say u can browse the internet ur photos while u talk not me.
4.I haven't seen the slide to answer feature, I liked that feature.
5.I never had any of these problems with my regular iphone that i bought in the states.
6.Dropped Calls.
Any advice on any of these issues would be greatly appreciated HOPE TO HEAR FROM ANYONE. THANKS IN ADVANCE:)You can contact your carrier and ask to wait the appropriate number of seconds before answering (of course with different ring tones per person you cannot set this on a per person basis so one would repeat instead if the ring tone is repeating.
Try standard troubleshooting http://support.apple.com/kb/HT1737
Check how many bars of signal you are getting. Try disabling 3G and see if you have the same issue. Contact your carrier.
Try reset your proximity sensor is working backwards.. or maybe settings > general > reset > reset all settings or even restore. That could be hardware.
Slide to answer should only appear if the screen is locked.
If reset and restore as new doesn't resolve and carrier says all is good with the account i'd contact Apple for service
Dropped calls could be a bad SIM (which could be the same as missed call). run it by your carrier. -
my iphone wont turn on and when i plug it up it just beeps like i plugged it up multiple times.HELP ME PLEAASSEEE?????????????????????
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Then...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode. -
Before, I used my ipod touch, but when I got iphone, I used that instead. Now I need to use the ipod aswell and plugged it in. Now I could not delete or add any songs. I tried to restore the ipod, but it didn't help. Something about the autorization?
Thanks for any help:)iPhones can be synched with only one computer. If you want to change this from your work to your home PC, you have to de-authorize it in iTunes there, and then set it up as a device on your home PC iTunes.
-
When I sync music from iTunes to my iPhone, I notice that only a fraction of my playlists sync. I want to get all 60 something songs on my custom smart playlist to sync, but only 27 of them get on my phone. What do I do to fix this?
It's not just one playlist either. My "top rated" playlist and "recently added" default smart playlists are also not syncing completely to my iPhone. I made sure that there is no limit to the number of songs that can be placed in the playlist.there's not a limit.
do the songs actually play on your computer? are there any error messages? -
Iphone trouble shooting with the wifi
could somebody help me? my iphone is link to my home wifi network but as soon as i try to go on the internet with safari the phone tell me the page does'nt exist or and the space of the internal memory is not enough...
Hey prisa,
What is the iPhones IP address?
Goto Settings> Wi-Fi> Tap the blue (>)to the right of your network name.
The article has some general tips that may resolve the issue.
http://docs.info.apple.com/article.html?artnum=305715
Jason -
This simply isn't right any more. Iphone troubles continue!!
Alright folks,
I do give every company the benefit of the doubt at least several times. I also do give companies time to get their act together. However, this ATT and Apple mix is beginning to leave a bad taste in my mouth. Ever since I updated my iphone to 2.2.1, my phone has been dropping calls like there is no tomorrow. Sometimes it doesn't even ring, but simply tells me I have a voice mail waiting. I watch my phone go from 4 bars to 2 bars to none than back to 4 bars in a matter of 30 seconds while I am still sitting in THE SAME SPOT. 3g speed is non existent while I'm showing FIVE FULL BARS. At times youtube videos just HANG (stop downloading) for no apparent reason. I regretted ever updating to 2.2.1 of horror.
Does anyone at all know how I can down grade back to the previous version of the OS. I had no problem with that one. Everything worked fine and I certainly had much much less dropped calls.
thanksBefore you go to the Apple Store, try:
1) Reset (hold the sleep/wake & home button until the Apple logo appears)
2) Restore in iTunes
3) Remove all apps and see if the problem persists. Re-add the apps one at a time. If the problem occurs when an app is added, remove that app and see if it continues to happen.
4) If none of these things works then it's time to make an appointment at the Genius Bar. -
[iPhone] - Troubles with the NavigationBar transparency - Possibily a bug
Hi,
It seems some people including me are having problems with the NavigationBar especially when we are trying to use the transparency as it is used in the Photo application (the photos are visible under the NavigationBar and ToolBar at the bottom).
I found those threads, they seem to be having the same issue:
http://discussions.apple.com/thread.jspa?messageID=7446397
http://discussions.apple.com/message.jspa?messageID=7898350
So this is what I've found (mostly using trial/error).
After creating a new NavigationBar Application, I simply set the Top Bar "Simulated Metric" to "Translucent Black Navigation" and the "Status Bar" to "Translucent Black". Et voilà, the table view (which is the unique view) is displayed properly underneath as the images shows :
http://www.sarahdery.com/IPhoneDev/NavigationControllerBug/1_INIB.png
http://www.sarahdery.com/IPhoneDev/NavigationControllerBug/2_INIB.png
http://www.sarahdery.com/IPhoneDev/NavigationControllerBug/3_SIMULATOR.png
+However, I have not been able to change Status Bar's color to black on the simulator. It's black on Interface Builder, "default" on the Simulator.+
Next, I tried to replace the table view with a simple UIView.
http://www.sarahdery.com/IPhoneDev/NavigationControllerBug/4_INIB.png
It seems to work on the Interface Builder, the ActivityIndicator is displayed underneath the NavigationBar. However, on the simulator it's quite something else :
http://www.sarahdery.com/IPhoneDev/NavigationControllerBug/5_SIMULATOR.png
As you can see, the ActivityIndicator has changed his position to be displayed under the NavigationBar.
I believe this is a bug otherwise I would really appreciate to know how to fix this annoying problem.
ThanksI am seeing this same issue. While i'm not certain it's a bug, it is proving to be rather elusive
-
Need Assistance with Download iOS 6 to an iPhone 4. Error 9006
I am experiencing difficulty with downloading ios 6 software onto my iPhone 4. I keep getting error message that due to an unknown error "9006", the software was not downloaded to my iPhone. I have tried downloading via iTunes (I have latest version 10.7) and via software update on the iPhone, but have been unsuccessful so far. I have followed suggestions on the iPhone trouble shooting assistant. Nothing has worked for me. Any suggestions?
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
Need dashcode to access an rss feed from another server
my client uses a blog set up by a professional organization he belongs to, and he wants me to create a web app that opens the blog on his iphone - trouble is dashcode specifically says I have to install the app on the same server that the rss feed is located. I can't do this as this server offers only blogs.
Are there any workarounds?
thankshttp://laughingsquid.com/creating-a-custom-iphone-webclip-icon-for-your-website/
-
Is anyone with original happy with 2.0?
I have the original iPhone running 1.1.4. I've been holding off on upgrading to 2.0 because of all the complaints. I love my current phone AND especially the long battery life.
Is anyone happy with the upgrade on the original phone?I'm very happy--I really love all the new features and am enjoying the new applications I bought. I was /very/ nervous to update because of all the talk here, and put it off until Sunday 07/13, but it went smoothly and apart from a few items to set up, my phone was restored with everything intact.
I had similar success with my husband's iPhone--trouble-free upgrade on that phone, too, and it works fine.
I was experiencing some Mail trouble but fixed it with suggestions I read on the Discussions here. Otherwise, I am not having troubles--my phone pairs and works with my car's Bluetooth system, speed seems the same, etc.
MobileMe is the only thing not pleasing me right now. It is pushing to my iPhone just fine, but I wish it would do more (like support subscribed calendars).
If you decide to upgrade, I hope you love it as much as I do and have a good experience.
Message was edited by: Oleander68 -
I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. initially itunes would let me go so far as downloadin the new software then an error poped up as soon as the download finished, and now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service, reconnect or try again later" any ideas on what i shud do?
Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore
-
I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68
HI,
The Apple IDs from @mac.com and @me.com (Older MobileMe and more recent iCloud Names) are also Valid AIM Screen names.
Any other sort of Apple ID is not a Valid AIM Name.
A Google ID that is associated with Google Mail Account (And has "Talk" enable on your Google Settings) can be used in iChat as Jabber Name/ID. (Google Run Jabber server).
Jabber and AIM are different IM Services and it is not easy or straight forward to add Buddies from one Service to the Buddy List of another. (As A Starting point consider it "impossible")
iChat 4 and 5 have links to the registration page of @Mac.com here with a "Get an iChat Account" button in the add (Account) screen (You select @mac.com or MobileMe and then press the Button - Choosing AIM and then pressing the button used to lead to the AIM registration page but AIM moved their page).
Apple IDs can be any valid email (or an @mac.com or iCloud registration)
Therefore you could make a Google ID into an Apple ID.
However this will not be a valid AIM Screen Name the way @mac.com or MobileMe/iCloud ones are.
Valid AIM Screen Names in Table (pic)
7:46 PM Monday; December 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Trouble adding printer to HP ePrint Home and Biz iPhone app - can't find printer's email address
I'm trying to connect my HP Photosmart c6380 to my iPhone. I already downloaded the app and my printer is connected to my wireless network, as is my iPhone, but I can't add my printer to the app.
When I go to "Manage ePrinters" and try to add a printer with the + button I see 3 choices:
Add ePrinter from list: "No ePrinters available"
Add Manually: I can't find the printer's email address even using the instructions found at the ePrint center.
Add from WiFi Network: My printer isn't shown in this list so it does not support auto discovery.
So I'm guessing that if I could just find my printer's email address that would connect it to my iPhone for wireless printing, but I can't for the life of me find it.
Any help is greatly appreciated.
Thanks.
This question was solved.
View Solution.Hello amybett,
I have bad news and good news. The bad news is that your printer is not Airprint/ePrint capable. However, the good news is that with the HP ePrint Home and Biz iPhone app it does not need to be Airprint/Eprint capable, as long as it is connected to the same network as your phone.
Here are the steps you will want to take to print something:
1. Setup the app by completing the email registration and entering the code (which I believe you have).
2. Select the item you wish to print using the menu in the app (Photo Albums, Saved Files, Web Browser, etc.).
3. Once you select the item you should see the item and a large "Print" button under it.
4. If the printer you want to print to is not listed above the "Print" button, select the icon on the right (wrench/computer) and select the printer you wish to use (along with other settings).
5. Tap on the "Back" button in the top left corner, then tap "Done" (blue button in the top right corner), and then tap the "Print" button to print your item.
Let me know if you are still having trouble after following the guide above.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution -
I am having trouble removing songs from my iPhone. i have unchecked songs in the library on my mac, but they still show up on phone after syncing. how do I remove them?
Hi asims01,
Welcome to the Support Communities!
The information below may be able to answer your questions about how to delete songs from your iPhone:
Deleting songs downloaded to your device
Tap the Music app.
Tap More > Songs at the bottom.
Scroll or search for the song you would like to delete from your device.
Swipe right to left on the song, and then tap Delete.
Note: You must be in Artists, Songs, or Albums view to delete songs from your device. Deleting from a playlist won't remove a song from your iOS device.
Also, this information can be found on page 64 of the iPhone User Guide for iOS 7
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Remove a song from iPhone. Tap Songs, swipe the song, then tap Delete. The song is deleted from iPhone, but not from your iTunes library on your Mac or PC, or from iCloud.
If you have iOS 7, this will delete the song from local storage, but the song will still appear with a cloud symbol in the Music app, as you've noticed. To hide the iTunes in the Cloud purchases, navigate to Settings > iTunes & App Store, and disable "Show All: Music”
There may be a few orphaned songs on your iPhone that were partially downloaded or corrupted in some way. If that is the case, you can erase all of the music from your phone. Follow the instructions below and select the Music app under Usage:
iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/ht1867
I hope this information helps ....
- Judy
Maybe you are looking for
-
Financial Reporting:How to supress G/L Accounts numbers at parent node
Hi, I have Local Hirearchy created in Query Designer in ROWS using "New selection" under a "structure." Direct cost (Node: 1) >Salaries(Node: 2) >Bench(Node: 2) and so on. Let say Salaries comprised of 3 G/L accounts and Bench has 2 G/L accounts. Dir
-
HDMI switch doesn't allow detection of monitor unless already powered.
Is there a way to trick the MBP into thinking the monitor is detected, so that it outputs (which would power the switch)?
-
We have an iMac 24-inch Mid 2007 with maximum of 4G bytes of SDRAM, with OX X 10.9.4 Mavericks. It is routinely locking-up with the rainbow wheel. Especially with iTunes and Safari. I'm wondering it it that Mavericks simply uses more RA that the ma
-
Using SRM SUS the portal BSP pages show both an SAP logo in the right upper corner and the text "SAP SRM" in the left upper corner. I have been able to replace the SAP logo with my company's logo, but how can I get rid of the SAP SRM text? Any hints
-
7373 screen image incomplete - please help repair ...
I bought the 7373 recentl and recently the image only covers one smallportion of the screen on the left hand side. Anybody have any suggestions? anyone know how and where to send it for repairs? Ernie EDIT: removed personal email addressMessage Edite