IPhone ui components

Hello all,
this might be a silly question but I believe I've seen the standart iphone components like top bar or standart ui buttons in the previous versions of flash. I can't see them on CS6. Are those excluded? if yes, where can I find them? thanks

Correct. At this point, everything has to be re-implemented, which is hugely time-consuming. I'm working on an app that loads JSON data and uses that data to populate my equivalent of a UITableView. I ended up creating my own custom IOSListItemContainer and IOSListItem classes. There's many things to think about for scrollable lists, like cell re-use (so that only the minimum amount of items are in the list at one time), section labels, scroll easing / elasticity. It's not easy to replicate this stuff while keeping performance up - and like i said, super time consuming. It'd be nice to have something like the three20 library for Flash.

Similar Messages

  • HT6446 My Health Data is showing my total steps for Daily average....

    specs:
    Using Apple Health App, with the Withings Health Mate and My Fitness Pal as the only 2 sources.
    Using an iPhone 5s with  26.7 GB capacity 4.2 GB available
    Model Number NE299LL/A
    OS Version 8.1 (12B411)
    I Updated all my Apps. I have gone into the Health Apps "all Data, and cleared all" this reset my dashboard to 0 steps. then after closing and opening both apps. I am right back to where i started. my "Daily Average" is showing my total steps. (or possibly dividing by 1)

    Well, I have just completed a full restore of my iPhone. It was not smooth at first. The restore froze about 10% through and I ended up having to hard reset the phone and start over. The second restore went smoothly but unfortunately, this did not solve anything.  All 3 iPhone measuresble components (flights climbed, steps and walking + running distance) still show "No data". I always had the option to enter manual data points, but I never actually tried to as I have no way of determining these 3 things.
    I will call Apple support back, but their only option will be to replace the phone. I really don't want to do that, not only because I don't want to have to set up the device for a third time, but I dont want some white box device; I want my brand new, immaculate one. Besides, it's clearly a software issue and likely to happen again with a new device. I guess Apple won't look into this as a software issue until enough people call in about it. That said, please take a few minutes and call Apple about this if you're one of the people affected.
    I will report back after speaking with Apple, but as I said, I doubt they're going to have anything other than a device replacement as a solution.

  • HT201413 I am running Windows 7, ITUNES 10.6.3.25.  I am unable to see my Iphone/sync my iphone in Itunes.  I have uninstalled all components of Itunes and downloaded the newest version to no avail.  Please help.....Thanks

    I am running Windows 7, ITUNES 10.6.3.25.  I am unable to see my Iphone/sync my iphone in Itunes.  I have uninstalled all components of Itunes and downloaded the newest version to no avail.  Please help.....Thanks 
    I am attaching the Diagnostics data below:
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Dell Inc. Inspiron N7010
    iTunes 10.6.3.25
    QuickTime not available
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0016AA9C0126E318
    Current user is not an administrator.
    The current local date and time is 2012-07-05 11:42:18.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 10.6.3.25 (x64) is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod (5th generation) running firmware version 1.3
    Serial Number:       8L643QK9V9R
    iPhone 4 (CDMA) running firmware version 5.1.1
    Serial Number:       C8RG57F0DDP8
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    I did all that HT1925 recommended and it was no help.  My computer still won't recognize my iPhone.  Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

  • Cant send mms messages. I get the error message:  "one or more of the message components have been delted by MMS Adaptation.  Either the message was too large or the components were unsuitable for your handset".  This only seems to be an issue to iphones.

    I cant send pic messages to iphone users. I get the error message:  "one or more of the message components have been delted by MMS Adaptation.  Either the message was too large or the components were unsuitable for your handset".  This only seems to be an issue to iphones.  I like this phone but have had nothing but trouble since day one.  I am so tired of being on the phone with verizon and still not getting all the problems corrected.  Someone please help!

    Hello christina267,
    Help is right here, front and center! Let's get your mms working properly. May I ask are you using the original stock messaging app to send texts and mms? Also, are you using any special characters or emojis in your message? Since you state that the issue is to iPhones, did you happen to have used an iPhone on your mobile number just before you were using the Galasy S 5? As you share the details then we can investigate.
    Thank you… 
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Non-genuine components in apple store iphone.

    Hello,
    Here is my situation. My phone worked perfectly fine till yesterday but went black all of a sudden for no apparent reason. I took it to the nearest apple store and they diagnosed a defective screen. However that isn't my biggest problem.
    When the opened the phone they found some components like screws and cables to be non authentic. I feel like I have been given a phone that has been compromised, causing me unfair problems. I do not think I deserve to pay 139.00 $ for the screen repair.
    Does anyone know how I should proceed ?
    Thanks

    jj008 wrote:
    Sorry if I wasn't clear. I haven't taken my phone anywhere before today. The supervisor was willing to repair it for the out of warranty price (139$)  even if it was tampered because he felt bad for me. However, I find it unfair that I need to pay the repair because the defect is caused by a non-authentic component that was put in my phone by them.
    Actually, the main factor that determines that the device repair will cost money is the fact that you are outside of your warranty.  Whether or not there was 'tampering', if you're outside of warranty, then you do NOT get free service or repairs.
    Normally, if there was tampering, the the answer is, "No service options are available, period."
    In this case, apparently you've been extremely lucky and found an Apple rep that is willing to ignore that rule (which is usually a hard and fast, unbreakable rule), and is offering a service option for you... or you've misunderstood what they said about the device.
    In other words, if the device has been 'tampered' with, there should be NO service options.  But you've been given the option that would normally apply if there was no tampering:  You are outside of warranty, so you may choose to pay the OOW screen replacement fee.
    In essence, they are treating it as if your iPhone was never tampered with, and offering you the normal option for being outside of warranty.
    You should take it and run with it.  You are being offered exactly what any other person in your situation (ignoring the 'tampering') would be offered.  No more, no less.

  • Outlook 2013 con win8 disattiva il componente aggiuntivo icloud per otlook e pertanto non sincronizza calendario con iphone

    outlook 2013 con win8 disattiva il componente aggiuntivo icloud per otlook e pertanto non sincronizza calendario con iphone
    il problema c'è da quando ho attivato outlook 2013 - prima funzionava benissimo Icloud. qualcuno può aiutarmi? grazie

  • Integrating Flash Animation Components in Standard iPhone Application

    Hi there,
    Will it be possible in Flash CS5 to use a flash animation in a generic OpenGL ES Frame as a GFX component ?
    For example I have a OpenGL ES Frame were I am drawing polygons, rasters and stuff with standard Objective C, and I would like to add, on top of that, a Flash animation generated by Flash CS5. The kind of thing we can do with Scaleform for example.
    That would be just great ^^
    Fabien

    In the Flash CS5 Beta we have seen this was definitely not possible.

  • I want to Sync my iPhone 4 to iTunes however I get an error message from iTunes each time I connect the phone to the PC saying that I should restore to factory settings. Frustrating because it's already annoying enough that I can't drag and drop mp3's!!!

    I have never been so frustrated before in my life with any phone. I find it obnoxious as it is that I cannot simply drag and drop files (especially MP3's) straight from my PC directly into my phone, which I have been used to doing up until now. Everyone who convinced me to get the iPhone has instructed me that my frustration can be fixed by downloading iTunes and syncing it all up via that program (which I have never used before). So, I downloaded the program successfully, however when I connect the iPhone 4 to the PC and iTunes is open, I get an error message that 'iTunes cannot read the content of the iPhone "iPhone" and that I should go to the Preferences tab of the iPhone and select 'restore' to restore this phone to factory settings. First of all, I don't understand why I need to do that. I have already downloaded apps and other important things in the 2 days that I have the phone. I am also scared that it will erase my contacts. This is such a headache. Music is very imporatant to me, but I am getting so frustrated that I don't have freedom over the phone which I thought was supposed to be one of the best out there. I would really appreciate help in this matter. I am sure the phone is great but I am on the verge of taking it back and getting something else.

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • Iphone not recognized by windows or itunes

    Can anyone please help me figure out how to resolve this issue?  My iphone 4 is not recognized by my PC.  My OS is by Vista Home Premium Service Pack 2.  I tried the various "device not recognized" troubleshooting to no avail.  I tunes is up to date.  I even turned off my security sw for a bit to see if there was a third party conflict...all to no avail.  There has got to be someone out there who has the smarts to show me how to fix this.  Please advise and many thanks in advance!

    Jason,
    I understand why Apple doesn't cover the water damaged phones under the warranty, but do you know why they don't fix them if the customer is paying? Is it just because they want the people to buy another phone so they can make more money? I guess I just don't get it.
    The cost to repair a device and all of its components is more than the cost of a new device.
    Other than the article I linked above, this is the part of the warranty/legal forms that would apply:
    +"US v1.0+
    +Apple reserves the right to refuse+
    +service on products that have serial numbers altered, defaced or removed or that are damaged due to+
    +accident, abuse, neglect, misuse (including faulty installation, repair, or maintenance by anyone other+
    +than Apple or an Apple Authorized Service Provider), unauthorized modification, extreme environment+
    +(including extreme temperature or humidity), extreme physical or electrical stress or interference,+
    +fluctuation or surges of electrical power, lightning, static electricity, fire, acts of God or other external+
    +causes. In such event, Apple may return the product to you without servicing it, and may charge you the+
    +Diagnostic Fee."+ from http://images.apple.com/legal/terms/repair/docs/070108aiphoneOOW.pdf
    -Jason

  • Itunes/Iphone/Ipod device driver issues - tried everything. Still not working.

    After hours and hours of research, I'm completely stuck. Here's the basic problem.
    When I plug in my Iphone to my laptop, windows pulls up a little window that says installing device driver software. After several minutes, the process fails and a message comes up that says windows found drivers for my device, but encountered an error and wasn't able to install them. In the device manager, the iphone is listed as an "other device" with a yellow triangle/exclamation point. Itunes never recognizes the device.
    When I plug in my ipod nano 4th generation, the exact same thing happens, except it's listed in the device manager as an ipod. (same yellow triangle though.)
    Up until today, both of these devices have been working properly, syncing without trouble. The iphone synced wirelessly and the ipod every time I plugged it in. I can't figure out what on earth happened to my laptop today that messed things up.
    It's also worth noting that I have another older ipod nano... second generation, I think, that plugs in and is recognized immediately, works perfectly.
    Here is what I've done so far:
    1. I worked through every single troubleshooting guide that Apple has to offer. No change.
    2. I did a complete clean install of itunes and all additional components, rebooted and reinstalled. No change.
    3. I uninstalled/re-installed usb controllers in the device manager. No change.
    4. reset both the phone and the ipod. No change.
    5. I've tried various cables. No change.
    6. I've run system checks and repair utilities for windows vista.
    7. I've used selective start up to see if another program is interfering. I've stood on my head and counted to one hundred. I've only said seventeen swear words.
    At this point I've done so much searching and troubleshooting, I can't imagine how anything is going to fix this issue. So this is my last hope. Please oh please be smart enough to tell me what to do...

    Not sure if this is significant, but in a weird turn of events, when I tried plugging the ipod in this morning, the little message that pops up to install device driver software actually told me the drivers were installed successfully. However, in the device manager, it still says the drivers are NOT installed properly, the little yellow triangle is still there and the ipod still isn't registering in itunes, or my computer. So. Not really any improvement, but a different symptom none the less?
    I'm desperate, guys. Someone help?

  • ITunes 9.2.1, iPhone 4, Windows 7 64 bit not working together

    I was able to connect my iphone 4 to itunes about a week ago. Then all of a sudden my iphone was not recognized in iTunes. I didn't get any error messages. I then upgraded to iTunes 9.2.1 on Friday in hopes that it would help. Unfortunately iTunes now takes >10 min to start, then after plugging in my phone, iTunes stops responding. Every once in awhile it will come back and I get the message "iTunes could not connect to this iPhone because an unknown error occurred (0xE800006B)". Although Win7 recognizes the phone as it pops up the auto play message and i can go to explorer and see it as a device. I have tried uninstalling and reinstalling iTunes. Confirmed it is the iTunes 64 bit version even though it looks like a lot of the processes are running in *32 mode. I have tried the what some of the support pages have indicated. I can't get anything to work. If anyone else has some other suggestions i would love to hear them.
    Computer:
    Windows 7 Home Premium Edition
    AMD Phenom(tm) 9550 Quad-Core Processor 2.20 GHz
    5 GB RAM
    64-bit OS
    Nvidia GeForce 9200 and 9300 GE display adapaters
    Running ZoneAlarm for Internet Security and Virus

    dylan1981 wrote:
    The EXACT same thing is happening to me. My phone is brand new, so the fact that I can't activate it due to this problem is really frustrating. I've uninstalled and reinstalled iTunes several times, followed apple's instructions in its problem solvers guide...nothing seems to work. I've messed around with the drivers a bit too, with no luck. Anyone have any ideas?
    Go to the Event Viewer (Control Panel || Administrative Tools || Event Viewer) and look under Windows Logs || Application. Do you see any Bonjour errors? Since Windows 7 recognizes the camera part of the iPhone (nicely done Win7 integration!) Microsoft is probably not the culprit here.
    Uninstall/reinstall iTunes is part of the process, but you also have to make sure you uninstall all the other components Apple installs (Apple Mobile Device Support, Bonjour for Windows, QuickTime), do a reboot, and then install everything from scratch. That may fix the problem.
    This is exactly what an Apple guy talked me through over the phone. (I think I even uninstalled Apple Software Updater) I had a similar problem with the iPad on Win7 x64 - it was Bonjour that is the culprit. The x64 flavor of Bonjour for Windows is not as stable as the 32-bit version.
    But everything has been golden for me since the reinstall...
    Give that a try.
    Then if not, you could start looking to see if there is another ZeroConf/SSDP provider that is conflicting with Apple's somehow.
    SS

  • Brand new iPhone shows in Devices; iPod touch no longer shows in Devices

    I bought an iPod 4 today and was able to sync it with my existing iTunes library. I connected to USB port, it showed in Devices & in My Computer (XP), no problem.
    However, my iPod Touch, 8 months old, will NOT show up in iTunes or My Computer now, and I have NO idea why. I did ALL the troubleshooting, including uninstall/reinstall iTunes, restart computer, etc. If the USB works for iPhone, I assume THAT is not the issue. After 5+ hours working on this, I am over it and wish someone could help. Apple sent me to all the troubleshooting articles and now they are closed.
    ???????

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    I would first remove and reinstall all the Apple software by:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    The drivers in windows that sees the iPod as a camera is different that the drivers that see the iPod in iTunes.

  • I cannot figure out why my iphone wont show up in itunes?

    I've been to the Apple support page where it walks you through the steps to uninstall and reinstall Itunes and it's components. I've done all those steps, and when I connect my iphone into my computer a window pops up that says "Auto Play" and it has different options for what I want to do with the device. All the options have something to do with pictures, so I'm guessing my computer is reading my phone as a camera maybe? Or it could be something else, I've tried to find out what it is but can't.
    Has anyone had similar issues or can provide me with any suggestions or help. It would be greatly appreiciated. If not do you think this is something Apple support would be able to help with if I call them?
    Thanks in advance

    Device not detected in iTunes for Windows

  • Since installing new software update, my iphone 4S no longer is recognized by itunes

    I installed the new software update to my Windows PC and my iphone and now my iphone 4s is no longer recognized by itunes and I cannot sync.  I already attempted unintalling itunes and reinstalling it - it didn't work.

    Hello KatieJean123,
    It sounds like your phone is not recognzied in iTunes anymore. I recommend the troubleshooting steps from the article named:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Here is an overview of the troubleshooting to be done:
    1. Update iTunes
    2. Check the USB cable
    3. Verify that Apple Mobile Device Support is installed
    4. Restart the Apple Mobile Device Service
    5. Verify that the Apple Mobile Device USB Driver is installed
    6. Check for third-party software conflicts
    If the issue persists, try uninstalling iTunes and its associated apps with either of these two articles depending on your operating system version and its associated softwares:
    Removing and Reinstalling iTunes and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    Or
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Iphone 3gs no longer connects to itunes.

    I have just upgraded my itunes to 10.3 64 bit but since the upgrade my itunes no longer connects to my phone, its fine with my ipod classic, I;m using the iphone 3gs 32 g. I have tried all of the normal stuff deleting itunes reinstalling reseting my iphone etc but to no availl please help.my software version for my iphone is 4.3.3 (8 J 2 ) Cheers for any help .
    Deano

    Hi gofroggy08,
    Welcome to the Support Communities!
    It's possible that the iTunes software didn't update properly.   Try the specific steps below for the iPhone first:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    I hope this information helps ....
    - Judy

Maybe you are looking for

  • HT5834 can't turn off iCloud keychain on apple devices and can't get them to sync !

    i could gey my apple devices to sync icloud keychains , nor could i get them to turn off icloud key chain. Solution: Reset icloud keycahin using forgot passcode option, it will reset the entire icloud keycahin and bring every thing back to the way it

  • How to revoke everything from a user when opening a new session.

    HI, I am using oracle 10g Express Edition and SQL Developer. I have 2 user, 2 database connections in my SQL Developer. First user is Oracle and its database connection is called TCF. Second user is SMITH and its database connection is called TCF_SMI

  • MySQL Locks

    Hi, This is quite complicated, and probably I'm making a big mess in many concepts... but can someone help me with this?? All right... I'm using MySQL DB, and it's default table types do not support transactions, so I'm supposed to use table locks in

  • Why do all of my previously purchased app say they are no longer available?

    Each time I try to download a previously purchased app, a message says it is no longer available.  It even happens with my movies I've purchased.  Is iCloud down or something?

  • Call a program via windows service

    Hi! I have write a windows service,and it works. I want to call a .exe file,and my .exe file is signature. The program can not work when I call it through my service. How can I solve my problem? Thanks!