IPhone unable to reconnect to iTunes due to error  0xE80000003 under Windows 7

uninstalled and reinstalled iTunes to the latest version according to the iTunes support.
The error continues to haunt the computer on all USB ports.
This actually happened after the TuneUp plugin got installed and was uninstalled via Control Panel.
Please help as I have to get music friom the iTunes to my iPhone very soon (like yesterday)
Thanks for your help.

I've seen it but it doesn't correspond to any of the behaviour in my case. The issue was resolved when TuneUp was re-installed which I'm not comfortable with, but have to live with until I find a better solution.
If anyone comes up with a better workaround than mine, please keep me posted here.
cheers all, peace out. :-)

Similar Messages

  • Iphone crash downloading iOS 6 and unable to restore using iTunes  due to error 3253

    I'm from New Zealand and woke up this morning to find the iOS 6 was available. So after an hour of downloading onto my iPhone 3GS, it wiped my phone, sent it into restore mode. I connected to iTunes - have been trying for almost 8 hours!!!!!!!! and it is unable to download iOS6 due to error 3252, connection resetting and error 23.
    have done everything, all firewalls and anti-virus are switched off, upgraded to latest version of iTunes, turned off computer, re set the internet a million times. Won't downald on anyone eses computer in this house, and friends using other internet have the same problem.
    My iPhone is now off and will not turn on! What the **** is going on Apple??? I spend a fortune on these products and these latest updates ahve been nothing but trouble!
    Please can anyone help, im getting really p@#$@d off!!!!!!!

    I had this problem at first initially, and tried it 4 or 5 times.  Once I made sure that no other unnecessary software was running, the restore worked successfully.  However, it sounds like you've probably tried that.  Good Luck.

  • Unable to fully install itunes due to error message

    I have been trying to install itunes and when I get about three quarters of the way in an error screen pops up telling me that I have an error writing to the file C:/Documents and Settings/All users/Application Data/.../GEARAspiWDM.inf and telling me I need to verify that I have access to this directory. How do I find that file and fix this problem so that I can fully install itunes?

    an error screen pops up telling me that I have an error writing to the file C:/Documents and Settings/All users/Application Data/.../GEARAspiWDM.inf and telling me I need to verify that I have access to this directory.
    Quite often those messages are caused by disk/file damage rather than a genuine permissions problem.
    Try running a chkdsk over your C drive. There's instructions and a guided help in the following Microsoft document:
    [How to perform disk error checking in Windows XP|http://support.microsoft.com/kb/315265]
    Does the chkdsk find/repair any damage? If so, can you now get your iTunes install to go through properly?

  • My iphone 5 got suddenly slipped into recovery mode when i was updating my phone with the latest update. I request the officials to act fast and come up with a recovery solution because the phone is unable to get restored on itunes due to error 3

    My iphone 5 got suddenly slipped into recovery mode when i was updating my phone with the latest update. I request the officials to act fast and come up with a recovery solution because the phone is unable to get restored on itunes due to "error 3" when ever i am trying to restore and neither of the istores have the solution for the same.

    Hi, Milanista5
    Thank you for visiting Apple Support Communities.
    When experiencing issues restoring or updating an iPhone, here are the best articles to go through.  If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    iOS: Troubleshooting update and restore issues
    http://support.apple.com/kb/ts1275
    Cheers,
    Jason H.

  • HT2292 gnature can't can't update new version of itunes due to error message saying invalid siupdate new version of itunes due to error messagecan't update new version of itunes due to error message saying invalid si saying invalid si

    can't update new version of itunes due to error message saying invalid si

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Unable to confirm transfer order due to error message "enter a storage unit

    Hi guys:
    I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?

    Hi Allen...
    Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
    Pls confirm and revert
    Regards
    Shiva

  • I can't open Itunes due to error -45075. What do I do?

    I can't open Itunes due to error -45075. What do I do?

    I Had this problem along with the error message that it's missing the driver GNSDK_DSP.DLL. I am Windows XP and fixed the error by going to Start>My Computer>Add or Remove Programs
    When the Add or Remove programs list is "populated", Find iTunes on it. Click the link that says "For more information" and the iTunes box will expand. You will see a button that says "Repair" and it says to reinstall the program if it is not working correctly, use the "Repair" button. I clicked the Repair button and it automatically started the reinstall. When all the progress bars disappear (it doesn't really give you any other indication that its done) click the "close" button and try to open iTunes again. It worked first time for me. I also saw another forum where someone said it worked for the other Windows versions by following the same route, just that in other windows versions it might be "Computer" instead of "My Computer" and the Add or Remove Programs function is also called something else. Hope this helps somebody having this problem. It drove me crazy finding the answer, but the fix was super simple once I found out what to do.

  • Cant open itunes due to error "the file itunes library.itl cannot be read becaues it was created by a newer version of itunes."

    Can't open itunes due to error "the file itunes library.itl cannot be read because it was created by a newer version of itunes."

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • I cannot connect to itunes due to error code (-1202)

    I cannot connect to itunes due to error code (-1202) can anyoone help?

    Hi there bish bash,
    You may find the troubleshooting steps in the article below helpful.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    -Griff W. 

  • Please i am unable to restore my ipad due to error 3194.The restore process stalls when it gets to the point where the firmwarwe is being updated.error message 3194 comes up.please help me

    please i am unable to restore my ipad due to error 3194.The restore process stalls when it gets to the point where the firmwarwe is being updated.error message 3194 comes up.please help me

    http://support.apple.com/kb/TS3694#error3194 
    Unable to contact the iOS software update server gs.apple.com

  • Unable to start App World due to error 2

    When I attempt to log in to Blackberry App World on my Playbook, or when I attempt to load an app update, I receive the message "Unable to start App world due to error 2".  A search of the knowledge base and forums does not seem to address this issue.  Any suggestions?
    Solved!
    Go to Solution.

    jontitmas wrote:
    De-brick method? Please help, how do you do this?
    First do a backup because you will lose every thing on the Playbook
    Then unplug the Playbook from the computer and make sure that you are using the latest version of the Desktop Manager on your computer.
    Turn off the Playbook
    With the Desktop Manager running, plug the Playbook into the computer without turning it on
    On the computer you will see a message saying that it can not communicate with the Playbook, on that message there is a button that says UPGRADE, click on it then after that REPAIR, and INSTALL
    This will reset the Playbook to the factory setting, so you will have to redo all the initial setup
    good luck
    Using the Playbook and the Z10 and the Z30 and loving them
    Martin

  • IPhone unable to reconnect to carrier after loss of signal

    Hi, my iPhone 4 is not able to reconnect to my carrier every time I leave a place that is out of coverage. Sometimes even after I restart or reboot my iPhone, it is still unable to reconnect to my carrier. It'll only reconnect to my carrier after I reset everything through my phone or restore through my PC. thanks

    I've seen it but it doesn't correspond to any of the behaviour in my case. The issue was resolved when TuneUp was re-installed which I'm not comfortable with, but have to live with until I find a better solution.
    If anyone comes up with a better workaround than mine, please keep me posted here.
    cheers all, peace out. :-)

  • IPhone connects and reconnects to iTunes

    When I plug in my iPhone 4S into my Mac, (if on silent mode) it sparatically vibrates because it charges and stops charging constantly and won't stop. I'm becoming really frustrated because iTunes won't connect with my iPhone. It appears in iTunes when it's "charging" and as soon as it stops charging, it disappears from iTunes. And over and over again. Please help me!!!

    Reboot both the iPhone & Computer.. (Do not use Silent Mode)
    Reset your iTunes account..

  • I am unable to re-install itunes due to an Error 2

    I have tried to uninstall and re-install itunes using the troubleshooting tips for windows 7 but I'm still having some problems. After I download it, a message pops up saying Apple Mobile Device failed to start and to verify if I have suffient privileges to start system services. Then when I press ignore, it gives an Error 2 (Apple Application support was not found).

    Then when I press ignore, it gives an Error 2 (Apple Application support was not found).
    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Can't install itunes due to a problem with windows installer package

    hello there i can't install itunes due to a problem with the windows installer package i found a page on this site (here is the link) http://docs.info.apple.com/article.html?artnum=304405 i done every thing on it and i still haven't been able to fix the problem i have tryed the following unstalling itunes deleteing the registry keys deleteing all the temp files disableing all anit-virus software and anit-spyware. runing cc clearner downloading a new installer for itunes and windows installer and the script thing. and trying to reinstall. nothing seems to work i don't know what else to do this is the error message i get when i try to install i tunes. "there is a problem with this windows installer package.
    A program required for thsi install to complete could not be run.
    Contact your suupport personnel or package vendor."
    Please Help i would be most greatfull for any advise given
    Message was edited by: Joe_TLC

    I pulled my brains out trying to figure this bug out and I may have a solution for you.
    All of it installed fine in my desktop, but a friend's laptop got the error you mentioned on quicktime, itunes, flash, officeXP and about anything else I tried to load for him.
    If you look in: C:\documents and settings\<username>\Local Settings\Temp there will be an iTunes install log...open it in Notepad and see if it isn't exiting with a 1619 error while running msiexec.exe
    If this is the case, this fix should work for you.
    Seems some configurations of XP (and possibly Vista) aren't allowing full administrator rights to the account you set up when you installed XP (even though User Editor says you do have those rights.)
    I read 2 MS articles and turned off simple file sharing, then gave ownership of the entire C: drive to the administrator. Logged the admin account off, logged his "admin" account in, and then gave rights to his personal directory to his account (c:\docs and settings\<username>)
    Once I did that, every install that had previously errored out performed flawlessly.
    The MS articles in question:
    http://support.microsoft.com/?kbid=316309 (1619 error)
    and
    http://support.microsoft.com/?kbid=308419 (how to set special permissions)
    Hope this helps!
    Doc

Maybe you are looking for