IPhone & Universal Dock - No video out after resume from pause

OK - original 16GB iPhone, latest universal dock and Apple Composite cable, hooked to a 42" Sony LCD TV. iPhone is at latest revision.
Used to be that if I used the remote to pause a video, I could wander off, make a cup of coffee, and when I came back, even though the iPhone was locked, I could press play on the remote and carry on where I Ieft off. Recently though, when I try to resume from the paused state, I get sound but no video and I have to walk over to the docked iPhone, unlock it, and then I get video out.
I can only assume that this bug was introduced (or the previously working feature was removed) by a software update. Whatever the cause, it is a pain.
The cynic in me would assume that it is Apple's sneaky way of reducing the feature set to below the minimum expected so as to drive users to buy an Apple TV. The optimist in me assumes it is a bug and it CAN BE FIXED IN THE NEXT RELEASE!
Anybody else experienced this issue?
Message was edited by: TheFamousJames

I also believe this is a bug, but I found a workaround. I after starting the video you press the wake-up button, the iPhone screen goes off, but the video keeps playing. Now if you pause using the remote, you can also resume using the remote without having to unlock the iPhone.
The weirdest thing about this is that after doing it once, you can unlock you iPhone and be able to pause and resume as expected. As soon as you change the video (that is, you turn the video out off) the iPhone forgets what he just learned and doesn't resume from the remote again.
So as a rule I always turn the iPhone screen off after starting a video. So I'm able to use my remote nicely. I hope this works for you too... and that it gets corrected in the next SW version!

Similar Messages

Universal dock s-video out to tv

Does anyone know if you can use the video out on the universal dock to see what music/song is currently playing? I wanted to use my ipod like a jukebox and display everything on my tv. I have everything hooked up right and the settings are right. I wonder if there is something wrong with my ipod or if the video out is only for photo's and video's.

Video out is only for photos and videos on the iPod.

Currently the iPhone does not offer video out capabilities

Currently the iPhone does not offer video out capabilities. Will there be a software update enabling the iphone to have this feature ? And wll the myvu universal work with the iphone if there is an update available ?

Hey unclescotty,
The iPhone does support video out with the 1.1.1 update. You'll just need an Apple Component AV Cable.
http://docs.info.apple.com/article.html?artnum=300233
Just update the iPhone through iTunes.
http://docs.info.apple.com/article.html?artnum=305744
Jason

HT4108 Is there a way that iPhone 5 can support video out?

I would like to know if there's any way possible that iPhone 5 can support video out and/or video mirroring??

Easiest way is Airplay:
http://support.apple.com/kb/ht4437

Dock + iPod Video Out

Hi all,
can anyone tell me if while the ipod is docked, the video out on the ipod can be used to view photos/videos ?
Thanks
Chris

I'm working on a similar problem.
When I connect a dock connector with usb charger the a/v out still works.
But when I connect the dock connector from my cars interface (which takes control of the ipod) I lose the a/v output from the 1/8" jack and headphone.
I am considering removing pin 8 on the dock (Video) in the hopes this may work. But I am concerned it is a software issue where if an "accessory" like head unit interfaces take control of the ipod then it shuts off the a/v output.
I wish their was a menu setting for this as all I need is to split off the video signal.
I'll post if I find a solution.

SMPlayer vs. Mplayer - behaviour after resuming a pause

For a few weeks I've been experiencing a change in SMPlayer behaviour after resuming a pause of playing a video - motion of the video is jerked for a few seconds. However, I don't experience this with MPlayer. Has anybody else noticed this or does anybody know what could I do to make SMPlayer work normally?

I've turned an extended log of MPlayer on and so these are logs created during a short play with some pauses (with jerked motions after resuming):
SMPlayer log (just extract, couldn't copy the whole log, but it doesn't seem to contain something relevant):
[22:40:33:653] Core::pause
[22:40:33:653] Core::pause: current state: Playing
[22:40:33:653] Core::tellmp: 'pause'
[22:40:33:707] MplayerProcess::parseLine: ''
[22:40:33:707] MplayerProcess::parseLine: ' ===== PAUSE ====='
[22:40:33:708] MplayerProcess::parseLine: ''
[22:40:33:708] MplayerProcess::parseLine: 'ID_PAUSED'
[22:40:33:708] Core::changePause
[22:40:33:708] Core::changePause: mplayer reports that it's paused
[22:40:33:708] BaseGui::displayState: Paused
[22:40:33:708] BaseGui::togglePlayAction
[22:40:33:709] BaseGui::checkStayOnTop
[22:40:35:104] Core::pause
[22:40:35:104] Core::pause: current state: Paused
[22:40:35:104] Core::tellmp: 'pause'
[22:40:35:143] BaseGui::displayState: Playing
[22:40:35:143] BaseGui::togglePlayAction
[22:40:35:144] Core::changeCurrentSec: mplayer reports that now it's playing
[22:40:35:147] BaseGui::checkStayOnTop
[22:40:38:432] Core::pause
[22:40:38:432] Core::pause: current state: Playing
[22:40:38:432] Core::tellmp: 'pause'
[22:40:38:507] MplayerProcess::parseLine: ''
[22:40:38:508] MplayerProcess::parseLine: ' ===== PAUSE ====='
[22:40:38:508] MplayerProcess::parseLine: ''
[22:40:38:508] MplayerProcess::parseLine: 'ID_PAUSED'
[22:40:38:508] Core::changePause
[22:40:38:508] Core::changePause: mplayer reports that it's paused
[22:40:38:508] BaseGui::displayState: Paused
[22:40:38:509] BaseGui::togglePlayAction
[22:40:38:509] BaseGui::checkStayOnTop
[22:40:42:012] BaseGui::showMplayerLog
[22:40:56:875] BaseGui::showLog
MPlayer log (I've cut out a long list of subtitles' lines):
/usr/bin/mplayer -noquiet -v -nofs -nomouseinput -sub-fuzziness 1 -identify -slave -vo xv:adaptor=0 -ao alsa -nokeepaspect -framedrop -autosync 100 -nodr -nodouble -input nodefault-bindings:conf=/dev/null -stop-xscreensaver -wid 52429143 -monitorpixelaspect 1 -ass -embeddedfonts -ass-line-spacing 0 -ass-font-scale 1 -ass-styles /home/ondra/.config/smplayer/styles.ass -fontconfig -font Arial -subfont-autoscale 0 -subfont-osd-scale 20 -subfont-text-scale 20 -subcp CP1250 -vid 0 -aid 2 -sub /home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt -subpos 100 -volume 32 -nocache -ss 417 -osdlevel 0 -idx -vf-add ass -vf-add screenshot -slices -channels 2 -af scaletempo,equalizer=0:0:0:0:0:0:0:0:0:0 -softvol -softvol-max 100 /mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi
MPlayer SVN-r32492-4.5.1 (C) 2000-2010 MPlayer Team
CPU vendor name: GenuineIntel max cpuid level: 2
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (Family: 15, Model: 2, Stepping: 7)
extended cpuid-level: 4
Detected cache-line size is 64 bytes
Testing OS support for SSE... yes.
Tests of OS support for SSE passed.
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNowExt: 0 SSE: 1 SSE2: 1 SSSE3: 0
Compiled with runtime CPU detection.
get_path('codecs.conf') -> '/home/ondra/.mplayer/codecs.conf'
Reading /home/ondra/.mplayer/codecs.conf: Can't open '/home/ondra/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: 159 audio & 349 video codecs
init_freetype
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
get_path('fonts') -> '/home/ondra/.mplayer/fonts'
Configuration: --prefix=/usr --enable-runtime-cpudetection --disable-gui --disable-arts --disable-liblzo --disable-speex --disable-openal --disable-fribidi --disable-libdv --disable-musepack --disable-esd --disable-mga --enable-xvmc --language=all --confdir=/etc/mplayer
CommandLine: '-noquiet' '-v' '-nofs' '-nomouseinput' '-sub-fuzziness' '1' '-identify' '-slave' '-vo' 'xv:adaptor=0' '-ao' 'alsa' '-nokeepaspect' '-framedrop' '-autosync' '100' '-nodr' '-nodouble' '-input' 'nodefault-bindings:conf=/dev/null' '-stop-xscreensaver' '-wid' '52429143' '-monitorpixelaspect' '1' '-ass' '-embeddedfonts' '-ass-line-spacing' '0' '-ass-font-scale' '1' '-ass-styles' '/home/ondra/.config/smplayer/styles.ass' '-fontconfig' '-font' 'Arial' '-subfont-autoscale' '0' '-subfont-osd-scale' '20' '-subfont-text-scale' '20' '-subcp' 'CP1250' '-vid' '0' '-aid' '2' '-sub' '/home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt' '-subpos' '100' '-volume' '32' '-nocache' '-ss' '417' '-osdlevel' '0' '-idx' '-vf-add' 'ass' '-vf-add' 'screenshot' '-slices' '-channels' '2' '-af' 'scaletempo,equalizer=0:0:0:0:0:0:0:0:0:0' '-softvol' '-softvol-max' '100' '/mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi'
Using nanosleep() timing
Terminal type `unknown' is not defined.
Parsing input config file /dev/null
Input config file /dev/null parsed: 0 binds
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
get_path('Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi.conf') -> '/home/ondra/.mplayer/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi.conf'
Playing /mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi.
get_path('sub/') -> '/home/ondra/.mplayer/sub/'
[file] File size is 821880832 bytes
STREAM: [file] /mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
LAVF_check: AVI format
AVI file format detected.
list_end=0x3324
======= AVI Header =======
us/frame: 40000 (fps=25.000)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
frames total: 133641 initial: 0
streams: 3
Suggested BufferSize: 0
Size: 640 x 368
==========================
list_end=0x10F4
==> Found video stream: 0
ID_VIDEO_ID=0
[aviheader] Video stream found, -vid 0
====== STREAM Header =====
Type: vids FCC: xvid (64697678)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 25/1 = 25.000
Start: 0 Len: 133641
Suggested BufferSize: 125416
Quality 10000
Sample size: 0
==========================
Found 'bih', 40 bytes of 40
======= VIDEO Format ======
biSize 40
biWidth 640
biHeight 368
biPlanes 1
biBitCount 24
biCompression 1145656920='XVID'
biSizeImage 1413120
===========================
Regenerating keyframe table for MPEG-4 video.
list_end=0x2186
==> Found audio stream: 1
ID_AUDIO_ID=1
[aviheader] Audio stream found, -aid 1
====== STREAM Header =====
Type: auds FCC: (0)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 1
Rate: 16000/384 = 41.667
Start: 0 Len: 222719
Suggested BufferSize: 8064
Quality -1
Sample size: 384
==========================
Found 'wf', 30 bytes of 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 48000
avg byte/sec: 16000
Block align: 384
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x2
mp3.nBlockSize=384
mp3.nFramesPerBlock=1
mp3.nCodecDelay=0
==========================================================================
list_end=0x3218
==> Found audio stream: 2
ID_AUDIO_ID=2
[aviheader] Audio stream found, -aid 2
====== STREAM Header =====
Type: auds FCC: (0)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 1
Rate: 16000/384 = 41.667
Start: 0 Len: 222735
Suggested BufferSize: 8064
Quality -1
Sample size: 384
==========================
Found 'wf', 30 bytes of 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 48000
avg byte/sec: 16000
Block align: 384
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x2
mp3.nBlockSize=384
mp3.nFramesPerBlock=1
mp3.nCodecDelay=0
==========================================================================
list_end=0x3324
AVI: dmlh found (size=248) (total_frames=133641)
list_end=0x3364
hdr=Software size=43
Software : VirtualDubMod 1.5.4.1 (build 2066/release)
list_end=0x309B07A2
Found movie at 0x380C - 0x309B07A2
Reading INDEX block, 400890 chunks for 133641 frames (fpos=815466410).
AVI index offset: 0x3808 (movi=0x380C idx0=0x4 idx1=0x1F8C)
Auto-selected AVI audio ID = 2
Auto-selected AVI video ID = 0
AVI: Searching for audio stream (id:2)
AVI video size=641146236 (133641) audio size=85530240 (222735)
VIDEO: [XVID] 640x368 24bpp 25.000 fps 959.5 kbps (117.1 kbyte/s)
Auto-selected AVI audio ID = 2
[V] filefmt:3 fourcc:0x44495658 size:640x368 fps:25.000 ftime:=0.0400
Clip info:
Software: VirtualDubMod 1.5.4.1 (build 2066/release)
ID_CLIP_INFO_NAME0=Software
ID_CLIP_INFO_VALUE0=VirtualDubMod 1.5.4.1 (build 2066/release)
ID_CLIP_INFO_N=1
File not found: '/home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt'
Failed to open /home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt.
File not found: '/home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt'
Failed to open /home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt.
[ass] ass_read_file(/home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt): fopen failed
Cannot load subtitles: /home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt
get_path('sub/') -> '/home/ondra/.mplayer/sub/'
[file] File size is 115710 bytes
STREAM: [file] /mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.srt
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
SUB: Detected subtitle file format: subviewer
SUB: opened iconv descriptor.
SUB: closed iconv descriptor.
SUB: Read 1352 subtitles, 0 bad line(s).
[file] File size is 115710 bytes
STREAM: [file] /mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.srt
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
[ass] Opened iconv descriptor
[ass] Closed iconv descriptor
[ass] File size: 300
[ass] Opened iconv descriptor
[ass] Closed iconv descriptor
[ass] [0xa6f6ef8] Style: Default,Arial,20,&H00ffffff,&H00000000,&H00000000,0,0,2,1,1,2,20,20,8
plaintext event at 1000, +3000: Downloaded From www.AllSubs.org
plaintext event at 35920, +1670: - Good night Annie.\N- Good night Fi.
plaintext event at 5286120, +3590: - Yes please.\N- Let's start again.
plaintext event at 5290710, +10000: Downloaded From www.AllSubs.org
ID_FILE_SUB_ID=0
ID_FILE_SUB_FILENAME=/mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.srt
SUB: Added subtitle file (1): /mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.srt
ID_FILENAME=/mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi
ID_DEMUXER=avi
ID_VIDEO_FORMAT=XVID
ID_VIDEO_BITRATE=959504
ID_VIDEO_WIDTH=640
ID_VIDEO_HEIGHT=368
ID_VIDEO_FPS=25.000
ID_VIDEO_ASPECT=0.0000
ID_AUDIO_FORMAT=85
ID_AUDIO_BITRATE=128000
ID_AUDIO_RATE=0
ID_AUDIO_NCH=0
ID_START_TIME=0.00
ID_LENGTH=5345.64
ID_SEEKABLE=1
ID_CHAPTERS=0
X11 opening display: :0.0
vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF)
vo: X11 running at 1680x1050 with depth 24 and 32 bpp (":0.0" => local display)
[x11] Current fstype setting doesn't honour any X atoms
[VO_XV] Using Xv Adapter #0 (NV17 Video Texture)
[xv common] Drawing no colorkey.
[xv common] Maximum source image dimensions: 2046x2046
Opening video filter: [screenshot]
Opening video filter: [ass]
[screenshot] query(Planar YV12) -> 3
[ass] FreeType library version: 2.4.4
[ass] FreeType headers version: 2.4.3
[ass] Init
get_path('fonts') -> '/home/ondra/.mplayer/fonts'
get_path('subfont.ttf') -> '/home/ondra/.mplayer/subfont.ttf'
[ass] Updating font cache
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
ID_VIDEO_CODEC=ffodivx
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: using SSE optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer III, 48000 Hz 128 kbit Joint-Stereo, BPF: 384
Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
ID_AUDIO_BITRATE=128000
ID_AUDIO_RATE=48000
ID_AUDIO_NCH=2
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??...
[libaf] Adding filter scaletempo
[libaf] Adding filter equalizer
[scaletempo] 1.000 speed * 1.000 scale_nominal = 1.000
[libaf] Adding filter format
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
[scaletempo] 1.000 speed * 1.000 scale_nominal = 1.000
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
Trying preferred audio driver 'alsa', options '[none]'
alsa-init: requested format: 48000 Hz, 2 channels, 1d
alsa-init: using ALSA 1.0.23
alsa-init: setup for 1/2 channel(s)
alsa-init: using device default
alsa-init: pcm opened in blocking mode
alsa-init: got buffersize=65536
alsa-init: got period size 1024
alsa: 48000 Hz/2 channels/8 bpf/65536 bytes buffer/Float 32 bit Little Endian
AO: [alsa] 48000Hz 2ch floatle (4 bytes per sample)
AO: Description: ALSA-0.9.x-1.x audio output
AO: Author: Alex Beregszaszi, Zsolt Barat <[email protected]>
AO: Comment: under development
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/floatle...
[scaletempo] 1.000 speed * 1.000 scale_nominal = 1.000
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
[scaletempo] 1.000 speed * 1.000 scale_nominal = 1.000
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
ID_AUDIO_CODEC=mp3
[Mixer] No hardware mixing, inserting volume filter.
[libaf] Adding filter volume
[scaletempo] 1.000 speed * 1.000 scale_nominal = 1.000
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
[scaletempo] 1.000 speed * 1.000 scale_nominal = 1.000
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
Starting playback...
SEEK: i=31390 (max:31427) dpos=6703872 (wanted:6703872)
SEEK: idx=31390 (a:31390 v:31427) v.skip=12 a.skip=0/0.000
XXX initial v_pts=418.520 a_pos=8064 (0.504)
[libaf] Reallocating memory in module format, old len = 0, new len = 69637
Increasing filtered audio buffer size from 0 to 69632
[mpeg4 @ 0x8a2dc40]Invalid and inefficient vfw-avi packed B frames detected
[ffmpeg] aspect_ratio: 1.739130
VDec: vo config request - 640 x 368 (preferred colorspace: Planar YV12)
Trying filter chain: ass screenshot vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.74:1 - prescaling to correct movie aspect.
ID_VIDEO_ASPECT=1.7391
VO Config (640x368->640x368,flags=0,'MPlayer',0x32315659)
REQ: flags=0x437 req=0x0
[swscaler @ 0x8ad6520]using unscaled yuv420p -> rgb24 special converter
REQ: flags=0x437 req=0x0
VO: [xv] 640x368 => 640x368 Planar YV12
VO: Description: X11/Xv
VO: Author: Gerd Knorr <[email protected]> and others
Xvideo image format: 0x32595559 (YUY2) packed
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x59565955 (UYVY) packed
Xvideo image format: 0x30323449 (I420) planar
using Xvideo port 331 for hw scaling
*** [ass] Allocating mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
*** [ass] Allocating mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
[ass] PlayResX undefined, setting to 384
*** [vo] Allocating mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
*** [screenshot] Direct Rendering mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
Unicode font: 1185 glyphs.
Unicode font: 1185 glyphs.
*** [ass] Allocating mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
===== PAUSE =====
ID_PAUSED
[ass] Font info: family 'Arial', style 'Normal', fullname 'Arial', slant 0, weight 80
[ass] fontconfig_select: (Arial, 80, 0) -> /usr/share/fonts/TTF/arial.ttf, 0
===== PAUSE =====
ID_PAUSED
===== PAUSE =====
ID_PAUSED
===== PAUSE =====
ID_PAUSED
So it seems there is no error during the resuming.

USB ports don't work after resuming from standby with Windows 8 on X230 tablet

I have just done a clean install of Windows 8 on my X230 tablet. Before installing Windows 8 I installed the most recent BIOS for this machine (version 2.50). After installing Windows 8 I installed System Update from the Lenovo Website and downloaded all the recommended drivers and other files. I've also installed all the latest Windows 8 updates.
Here are the symptoms of my problem: After resuming from standby/sleep mode, my USB ports do not work. My computer has two USB 3.0 ports and one USB 2.0 ports. All exhibit the same behavior. After resuming from standby mode I have tried inserting both my mouse and a USB thumbdrive, but neither are recognized. After restarting Windows, the USB ports work again... until I resume from standby mode again.
I hope there is a solution to this issue. It is very frustrating.

Thanks for the suggestion about tweaking the "Allow this computer to turn off this device" feature. I un-checked that box for every entry I could find under "Universal Serial Bus Controllers" in the Devide Manager. Unfortunately, the same symptoms of my problem persisted.
I went back and looked at the README file associated with the BIOS 2.50 download on Lenvo's support site. At the bottom of the file it gives a "Summary of Changes". Under version 2.03 of the BIOS (the version just before version 2.50), it says:
- (Fix) Fixed an issue where USB device might not detected when system resume from sleep mode.
This indicates that Lenovo support was already aware of such issues. The problem was intended to be fixed in version 2.03 of the BIOS. However, the issue persists on my machine, even with the latest BIOS.
Hopefully someone from Lenovo can comment here.

Problems after resuming from hibernation

I’ve been getting horizontal lines and sound distortion after resuming from hibernation. Has anyone had similar problems or found a solution for this yet? I’m on Lion OS X 10.7.3.

Rorschach wrote:What freezes? Just X or the whole kernel? Can you ssh to your machine?
Now it doesn't freeze anymore. I really don't know what the heck is going on on my machine.
Next time that the machine freezes I'll try to ssh to it. Thank you for pointing this out.
Last edited by ArchArael (2010-03-26 15:56:17)

No sound in Flash after resuming from suspend

After I resume from a suspend or sleep there is no sound in Flash and there is no networking.
The only way is to restart my browser to reestablish the sound.
Is there a solution for this problem?
Thanks.

This does not happen with Firefox in Ubuntu, as an example. So something must be wrong somewhere.
I can confirm this happens to me in Arch with Firefox 4.0b7 and Chromium 7.0.517.44. I noticed that after resuming from suspend, not only sound (in Flash) is missing, but Flash is behaving weirdly (YouTube video plays much faster) and CPU usage goes crazy without doing any particular action.
Last edited by Niavlys (2010-12-05 23:34:30)

My Mountain Lion mac crashes after resuming from sleep

Hello
My Mountain Lion mac crashes after resuming from sleep every time I use it
It happens every time the mac resumes from sleep and it started like a week ago
I remember installing the new updates for flash? and xquartz and nothing else.
I have also had microsoft word installed on my mac for about 1 weeks before this problem started so might be related to that
Please share with me any tips on how to fix this because I am really annoyed of losing stuff after each time my mac resumes from sleep

I have an iMac bought may -11, and it worked fine with Snow Leopard.
About a week ago I bought and installed Mountain Lion 10.8.2. Everything went fine, and all software worked ok. iPhoto had some problems, but after installing update the system prompted to do, it has worked ok.
The propblem occurs now and then, when computer is waked up from sleep. The Desktop occurs, but no software starts, not even System Tools untlil rebooting the computer. Of course, I can not reboot the computer from "Apple menu", but holding the power button down.
This is very embarassing! OsX Mountain Lion has turned out to be a very big disappointment. I installed id because of iCloud (i have a new iPad, too with iOs 6 installed).
Can anyone help me? Is there any other way to solve the problem than re-installing good old Snow Leopard?
I would not like to do that, I bought Mac because I was bored in re-installing and recovering!
Thank you

Explorer.exe consuming 100% CPU after resuming from hibernation

Hello,
For the last months, I repeatedly have the problem that sometimes (every 2nd or 3rd time) after resuming from hibernation, in a few cases also after disconnecting from the Internet, one or more instances of explorer.exe are consuming 100% CPU, but never
the shell instance.
I tried figuring out what it was doing, but I was unsuccessful so far.
Here is a stack of the thread which consumed most of the CPU:
0, ntoskrnl.exe!KiDeliverApc+0x166
1, ntoskrnl.exe!KiSwapThread+0x31f
2, ntoskrnl.exe!KiCommitThreadWait+0x129
3, ntoskrnl.exe!ExpWaitForResource+0x29f
4, ntoskrnl.exe!ExEnterPriorityRegionAndAcquireResourceExclusive+0x1ad
5, win32k.sys!EnterCritAvoidingDitHitTestHazard+0x13
6, win32k.sys!NtUserMessageCall+0x28
7, ntoskrnl.exe!KiSystemServiceCopyEnd+0x13
8, user32.dll!NtUserMessageCall+0xa
9, user32.dll!SendMessageWorker+0x168
10, user32.dll!SendMessageW+0xfb
11, ExplorerFrame.dll!CNscTree::_TreeInvalidateItemInfo+0xd0
12, ExplorerFrame.dll!CNscTree::_EnumBackgroundDone+0xb4a14
13, ExplorerFrame.dll!CNscTree::OnQIUpdateEnumDone+0x93
14, ExplorerFrame.dll!CNscEnumQueueItem::Dispatch+0xcf
15, ExplorerFrame.dll!CTaskLock::DispatchQueueItem+0xc5
16, ExplorerFrame.dll!CNscTree::_SubClassTreeWndProc+0x118
17, ExplorerFrame.dll!CNscTree::s_SubClassTreeWndProc+0x5f
18, comctl32.dll!CallNextSubclassProc+0xe0
19, comctl32.dll!MasterSubclassProc+0xa2
20, user32.dll!UserCallWinProcCheckWow+0x149
21, user32.dll!DispatchMessageWorker+0x1a7
22, AppVEntSubsystems64.dll!VirtualizeCurrentThread+0x1e492
23, ExplorerFrame.dll!CExplorerFrame::FrameMessagePump+0xe3
24, ExplorerFrame.dll!BrowserThreadProc+0x5e
25, ExplorerFrame.dll!BrowserNewThreadProc+0x3a
26, ExplorerFrame.dll!CExplorerTask::InternalResumeRT+0x12
27, ExplorerFrame.dll!CRunnableTask::Run+0x114
28, shell32.dll!CShellTaskThread::ThreadProc+0x2a3
29, shell32.dll!CShellTaskThread::s_ThreadProc+0x2f
30, SHCore.dll!StrRetToBSTR+0x19f
31, kernel32.dll!BaseThreadInitThunk+0x22
32, ntdll.dll!RtlUserThreadStart+0x34
I was hoping I could identify a rogue shell extension or something similar, but I didn't find any such evidence so far.
In case you need this information, this is a list of my shell extensions/copy hooks/context menu handlers/drag&drop handlers (without duplicates):
+ " SkyDrivePro1 (ErrorConflict)" "Microsoft OneDrive for Business Extensions" "Microsoft Corporation" "c:\program files\microsoft office 15\root\vfs\programfilesx64\microsoft office\office15\grooveex.dll" "12.11.2014 01:13"
+ "{C52AF81D-F7A0-4AAB-8E87-F80A60CCD396}" "" "Apache Software Foundation" "c:\program files (x86)\openoffice 4\program\shlxthdl\shlxthdl.dll" "20.09.2013 12:50"
+ "{C52AF81D-F7A0-4AAB-8E87-F80A60CCD396}" "" "Apache Software Foundation" "c:\program files (x86)\openoffice 4\program\shlxthdl\shlxthdl_x64.dll" "20.09.2013 12:41"
+ "7-Zip" "7-Zip Shell Extension" "Igor Pavlov" "c:\program files\7-zip\7-zip32.dll" "18.04.2011 19:34"
+ "7-Zip" "7-Zip Shell Extension" "Igor Pavlov" "c:\program files\7-zip\7-zip.dll" "18.04.2011 19:35"
+ "ANotepad++64" "ShellHandler for Notepad++ (64 bit)" "" "c:\program files (x86)\notepad++\nppshell_06.dll" "12.05.2014 10:49"
+ "Ath_CopyHook" "Bluetooth File Transfer Plugin" "Qualcomm®Atheros®" "c:\program files (x86)\bluetooth suite\folderviewimpl.dll" "25.09.2013 10:58"
+ "Atheros" "Atheros Bluetooth Module" "Qualcomm®Atheros®" "c:\program files (x86)\bluetooth suite\btvappext.dll" "25.09.2013 10:58"
+ "DropboxExt" "Dropbox Shell Extension" "Dropbox, Inc." "c:\users\david\appdata\roaming\dropbox\bin\dropboxext64.24.dll" "24.06.2014 01:32"
+ "DropboxExt1" "Dropbox Shell Extension" "Dropbox, Inc." "c:\users\david\appdata\roaming\dropbox\bin\dropboxext.24.dll" "24.06.2014 01:31"
+ "FTShellContext" "Atheros Bluetooth Module" "Qualcomm®Atheros®" "c:\program files (x86)\bluetooth suite\shellcontextext.dll" "25.09.2013 10:58"
+ "GDContextMenu" "Google Drive shell extension" "Google" "c:\program files (x86)\google\drive\contextmenu64.dll" "16.01.2015 01:57"
+ "GDriveBlacklistedOverlay" "Google Drive shell extension" "Google" "c:\program files (x86)\google\drive\googledrivesync64.dll" "16.01.2015 01:56"
+ "igfxcui" "igfxpph Module" "Intel Corporation" "c:\windows\system32\igfxpph.dll" "09.09.2013 18:26"
+ "LockHunterShellExt" "LockHunter Explorer Extension" "Crystal Rich Ltd" "c:\program files\lockhunter\lhshellext32.dll" "25.03.2009 08:53"
+ "LockHunterShellExt" "LockHunter Explorer Extension" "Crystal Rich Ltd" "c:\program files\lockhunter\lhshellext64.dll" "28.04.2009 10:21"
+ "PDF Shell Extension" "PDF Shell Extension" "Adobe Systems, Inc." "c:\program files (x86)\common files\adobe\acrobat\activex\pdfshell.dll" "11.05.2013 10:34"
+ "PushbulletCtx" "" "" "File not found: :/Program Files (x86)/Pushbullet/pushbullet_ctx.DLL" ""
+ "RecuvaShellExt" "Recuva shell extensions" "Piriform Ltd" "c:\program files\recuva\recuvashell64.dll" "14.03.2014 12:41"
+ "SD360" "360 Total Security" "" "c:\program files (x86)\360\total security\menuex64.dll" "12.01.2015 03:55"
+ "SourceGearDiffMergeShellExtension32" "SourceGear DiffMerge ShellExtension 32" "SourceGear LLC" "c:\program files (x86)\sourcegear\common\diffmerge\sourcegeardiffmergeshellextension32.dll" "23.10.2013 19:15"
+ "SourceGearDiffMergeShellExtension64" "SourceGear DiffMerge ShellExtension 64" "SourceGear LLC" "c:\program files\sourcegear\common\diffmerge\sourcegeardiffmergeshellextension64.dll" "23.10.2013 19:17"
+ "StartMenuExt" "Start Menu Helper Extension" "IvoSoft" "c:\windows\syswow64\startmenuhelper32.dll" "20.04.2014 18:17"
+ "StartMenuExt" "Start Menu Helper Extension" "IvoSoft" "c:\windows\system32\startmenuhelper64.dll" "20.04.2014 18:16"
+ "WinRAR32" "WinRAR shell extension" "Alexander Roshal" "c:\program files\winrar\rarext32.dll" "02.12.2014 11:07"
+ "WinRAR" "WinRAR shell extension" "Alexander Roshal" "c:\program files\winrar\rarext.dll" "02.12.2014 11:07"
+ "WinSCPCopyHook" "Drag&Drop shell extension for WinSCP (64-bit)" "Martin Prikryl" "c:\program files (x86)\winscp\dragext64.dll" "14.08.2013 12:22"
I you have any clue what might be going, I would be very happy to hear it. It's really annoying, as I have to kill explorer.exe and thereby close all my folder windows when this happens.
Thank you!
Best regards,
David Trapp

Hello,
thanks for having a look. However, I already ran SFC before posting on this forum (as part of my own investigation) and it came back clean. RescueTime (a time tracking tool) is probably not the culprit because it happened also several times in the past without
RescueTime being running (that was because I had accidentally removed it from autorun at that time).
Unfortunately, I can't follow your "invalid date" explanation. I don't think an "invalid date" is anywhere involved; in fact, the method in question is called "_TreeInvalidateItemInfo" and not "_TreeInvalidDateItemInfo"
(note that there is only one "d"), so I assume its job is just to invalidate (and in turn, refresh) the cached information about nodes in the left pane's folder tree of the explorer window(s) - since the folder tree is the only NamespaceTreeControl
(whose corresponding class name is CNscTree) in explorer folder view windows. As I see it, something is causing explorer to repeatedly refresh the folder tree data, but I am stuck at finding out what exactly.
Best regards,
David Trapp
EDIT: Disassembling ExplorerFrame!CNscTree::_TreeInvalidateItemInfo confirms that, because it seems to call TreeView_SetItem for a tree node and its parent (possibly with all fields set to *_CALLBACK), and CNscTree::_UpdateItemDisplayInfo
for the parent node.
EDIT2: I'd love to dig more into the trace, however I am hitting a wall at function names/addresses. Everywhere where I would expect a function name/address (such as the "by stack" views), I only see question marks instead. What
could be the reason?

Firefox hangs after resume from hibernation

The problem is basically exactly like described here, only the solution presented there does not actually work for me:
http://askubuntu.com/questions/59062/a-script-on-this-page-may-be-busy-or-it-may-have-stopped-responding-everytime
What happens is that every time I hibernate my laptop (with Windows 7 Pro, 64bit), when I resume from hibernation, FF is completely unresponsive (hangs) for minutes. Easily around 5 minutes. Eventually a dialog box pops up with the following:
"A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete."
And the two buttons are: "stop script" or "continue". After I click "stop script" the unresponsiveness finally goes away, and FF starts working normally again.
I think possibly even clicking "continue" also makes it go back to normal, but I'm not sure anymore since I have recently just switched to sleep mode out of frustration in order to not deal with it anymore, and I don't remember exactly if I get the same result from clicking either option.
This is extremely frustrating.
Someone else reported an extremely similar symptom here:
https://support.mozilla.org/en-US/questions/935110?esab=a&as=aaq
It might even be the exact same symptom. Maybe that person simply never waited long enough for the dialog box to appear, but otherwise the unusability symptoms are the same.

Ok so I finally got around to testing this thoroughly, as you suggested. I used FF in SafeMode for about 2 days now, and went through at least half a dozen hibernation/resume cycles. Probably closer to 10. I can conclude that using safe mode (aka restarting with all add-ons disabled) did not solve it at all. The issue remains.
As always, simply resetting FF (either with enabled or disabled addons) seems to make this problem less severe, if not almost go away completely. But after a few hibernate/resume cycles, it becomes really bad. Before posting this, I was using Opera for like 10 minutes after resuming from hibernation before FF finally snapped out of it, and windows that I had clicked on in the task bar, like 10 minutes ago, finally popped up.
I have not yet tested the disabling hardware acceleration. Sounds quite doubtful that it might help but I'll try.
How can we get the developers' attention on this?
33 others report having this problem (as of this post). And there are similar reports elsewhere. But after many new versions of FF, it seems that the developers are not addressing these bugs but are instead focused on new features to compete with whatever Chrome rolls out.
Thanks!

Update to 10.6.8 - system hang (mouse issue) after resume from sleep

I am on older
MacBook Pro3.1
Intel Core 2 Duo
2.6GHz
Run on 10.6.8 almost flawelessly. Shortly after upgrade to 10.6.8 system started to hang periodically after resuming from sleep. Symptoms are that it stops responding to mouse (be it touch pad or USB mouse). Keyboard seems to be ok but system doesn't seem to be fully functional. I am able to ssh from the other computer and 'shutdown -r now' after reboot system seem to be ok until next resume from sleep. What interesting though is that this problem newer manifests then I am using external monitor.

Found problem. It was due to magic mouse that I left on. I carry this mouse in the laptop bag but rarely use it. Last time I used it (around the same time I install the update) I left it on in the bag. It was apparently disconnecting/connecting on its own and by some reason sometimes was breaking touch pad and other usb mouse connected to laptop, as soon as I switched magic mouse off broblem was fixed

Touchpad permanently not working after resuming from suspend

I lost touchpad and trackpoint functionality after resuming from suspend on my ThinkPad E530 (3259CTO).
Even after a complete power off (with the battery removed), the touchpad is detected but doesn't send any event, and the trackpoint is not detected.
In Windows, in the UltraNav control panel, the touchpad is marked as enabled and cannot be disabled, the trackpoint is grayed.
In Linux, I can see the difference is kernel traces when the driver is loaded.
Before : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
Now : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x0/0x0
After looking at https://gerrit.chromium.org/gerrit/#/c/31105/ and Synaptics public documentation, I was able to get more information : the device status register (F01_RMI_Data0) is 0x45, which means the touchpad is in flash programming mode since there is a firmware CRC failure.
It looks like http://code.google.com/p/chromium-os/issues/detail?id=24298, so it's probably not a Lenovo specific problem, but a bug in Synaptics firmware.
Can Lenovo provide the firmware to flash like http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-Touchpad-jumpy-response-when-used-with-90... which would hopefully make my touchpad working again ?
The original firmware should work, but an updated one would be better, if it avoids losing the touchpad again later.

I don't know why, but this made me think of the episode of the simpsons when home tries to get over 300 pounds so he can work from home. When he tries to dial the phone he hist all the buttons and gets a recording that says "We're sorry, you're fingers are too fat. To obtain a special dialing wand, please mash the keypad now."
BTW, sorry I can't help... but at least I am entertained easily.

Windows 8 won't find any airport after resuming from standby

Hi,
I have had a windows 7 PC with both airport express (2nd and 3rd generation) working flawlessly. I bought a new Windows 8 Laptop. Initially everything worked fine, but after resuming from standby mode (closed the display and reopened) my itunes stopped working, and the airport utility software was unable to find both airport express. After shutdown and restart they both worked again until the next standby mode.
I've read somewhere that it might be a conflict with IPv6 so I disabled it from registry, but the problem remains.....
any thoughts
Regards,
German

Did you upgrade the drivers from the wireless card manufacturer in win8 machine.. ??
If that doesn't work.. do some more basic wireless investigation..
1. Are wireless names SMB compliant.. ie short, no spaces and pure alphanumeric?
2. WPA2 Personal security with a password which also conforms to the above.
3. Test with fixed wireless channels. 11, 6, 1
4. If none of the above work.. turn off security for a few minutes and see if that works.

IPhone & Universal Dock - No video out after resume from pause

Similar Messages

Maybe you are looking for