Iphone update now usb screen lock

Please help Iphone updated, now locked on itunes usb screen

And so what happens when you actually connect your phone to your computer via USB like the logo indicates?

Similar Messages

I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP

I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP

The typical fix if the progress bar totally freezes - meaning no movement at all for more than 20 minutes - and iTunes will no recognize the device - is to try to put the iPad into recovery mode. That is explained here.
iPad: Unable to update or restore
However, don't jump the gun. Keep an eye on the progress bar and if it is moving at all - even very slowly - let it go for a while. I'm updating my iPod touch first and the progress bar is moving but very slowly.

I tried to turn off the voice over thing on my iphone and now the screen is completely dark i don't know what to do now

i tried to turn off the voice over thing on my iphone and now the screen is completely dark i don't know what to do now...help! ima go crazy without out my phone

ok so this is what i did i finally got it to work...so i taped the black screen with 3 fingers and then it went back to normal and it ****** me off because i had tryed that already so when it goes back to normal even if the voice over is still on it is easy to turn it off if you follow the steps....lol i googled how to turn off voice over so google it

I have iPhone 4 and I changed my setting to voice now it won't let me open my iPhone saying text editing/ screen lock pls! Help

I have iPhone 4 and I changed setting to voice just curousity and now I can't even log in my passcode. Saying screen lock pls, help

Hello Scorpio2013,
There are a couple of ways to disable VoiceOver: from iTunes and directly on the device itself. I've linked an article that contains steps for getting to a point at which you can disable VoiceOver.
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
http://support.apple.com/kb/HT3577
VoiceOver
If VoiceOver is on and you want to turn it off from the device instead of from iTunes, remember that a double-tap acts like a single tap and you need to use three fingers to scroll when VoiceOver is on:
Press Home.
Tap Settings. Then double-tap Settings.
Tap General. Then double-tap General.
Use three fingers on the screen to scroll to Accessibility.
Tap Accessibility. Then double-tap Accessibility.
Tap VoiceOver. Then double-tap VoiceOver.
Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.
You can configure the device to display options for VoiceOver, Zoom, or White on Black when you triple-click the Home button. This feature is off by default; to enable it, tap Settings > General > Accessibility > Triple-click Home.
Cheers,
Allen

IPhone app suspended on screen lock

If this is the wrong forum for such a question, please let me know!
I've developed an iPhone app with Flash CS5 that polls certain things every few seconds. It's working as expected, except when the iPhone screen locks (by itself due to inactivity, not when a user presses the lock hardware button on the top of the phone).
Other applications I've seen are able to continue their polling or activity after the screen is locked, but mine appears to stop completely until the screen is unlocked. It resumes correctly after the screen is unlocked.
What do I need to do (either in the Actionscript or perhaps a publish setting?) to allow the app to keep polling when the screen is locked?

And so what happens when you actually connect your phone to your computer via USB like the logo indicates?

Dropped iPhone 3G - now white screen

The day after picking up my iPhone 3G, I pulled it out of my pocket and set it on a counter. It slipped and fell about 30" to the floor, now the screen is totally white with a thin, faint green line down the center. iTunes still recognizes the phone and it will sync.
I have done all the resets and restores suggested, including a new phone reset, nothing works.
AT&T says to deal with Apple, Apple says deal with AT&T. No insurance offered thru AT&T or it wouldn't be an issue.
Anyone know what I can do?

I am 400 miles from the nearest Apple store, so I guess I am outta luck there.
I called Apple about repairing it and what they told me is that for $199, they will replace it with a refurbished phone. Unfortunately, AT&T has no insurance or replacement program, so I guess I am stuck with a brick here and a two year commitment to that brick.
Anything I do on my own voids the warranty, and with all the problems that Apple has had with this phone, I would like to have some coverage.
Why doesn't Apple or AT&T offer insurance on these things. Every other phone AT&T sells has insurance coverage, but not the iPhone. If the dang thing can't survive a 30" fall then insurance is a must have.
I am starting to rant now, but this is frustrating. I have always stayed away from Apple products because they are so proprietary. Guess I should have stuck with my own advice.

Old iPhone 2G on USB screen cannot restore to FW 3.1.2

Hello,
I found my 1st iPhone 2G and it displays the iTunes USB screen. I have tried many different approaches (googling through) to factory restore
it on iOS 3.1.2 but no luck. iTunes gives error messages after it tries for a short period to "Preparing iPhone for restore".
I have tried the DFU mode and then Restore, or the SHIFT-Restore with an official ipsw downloaded. Nothing works!
Can somebody help me and tell me what am I doing wrong?
Thank you in advance.
Regards,
sugarakis

Hi Folks,
Has nobody suffer this issue? I think is a problem of lack of enough free RAM memory. Because I saw, with an application, how slow is the system (even stuck) if you turned ON with an application left opened.
Can anyone help me, please?

Deleted old iPhone update, now what?

I received an error message during the new iPhone update 1.1.1, and I read some of the discussions here about removing a previous iPhone update (iPhone1,11.1.1_3A109aRestore.ipsw) to allow for the new 1.1.1 update. I did that and the update worked, but I am not sure - do I need to keep that other update, or should I just toss it? Thank you!!
P.S. My update worked just fine after deleting the file above.

It won't do you any good to keep the old update since you supposedly cannot revert to it anyway. Trash it and empty the trash.

My iphone 3gs has a screen lock on it my gf entered passcode wrong to many times now phone is disabled and i cant figure out how to restore it with my itunes because itunes will not connect until passcode is entered which it wont let me do pls help

how do i restore my iphone 3gs with itunes when i cant enter my passcode to screen lock

You will then need to force the phone into recover mode (search Google). All data on the phone will be lost.

Updated my iphone and now my screen is stuck on the loading part with the apple logo! help

it wont turn off or connect to itunes or anything!

go into dfu mode and then restore with apple

Update now blank screen on MacBook Pro

I updated MacBook Pro yesterday and after restart the screen was and still is blank. Restarts do nothing. Any ideas?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Tried to download latest iphone update now stuck in recovery mode.

Tried wirelessly updating iPhone 4 with the lates update. The initial attempt failed and gave me an error message. On the second attempt it seemed to work until the screen showed it needed to be connected to itunes. When I did this itunes said the phone was in recovery mode and needed to be reset to factory settings. The phone has not been backed up for a while. Is there a way to get out of recovery mode without losing all photos and video that have not been backed up?

Sorted it now, took it to Apple store and explained etc. was nothing could do but restore the phone. Was told to make sure itunes on PC was up-to-date version before updating iphone which could have caused the error.

Belle update,now pink screen

I know of the N8 pink screen problem and it only mildly affected my N8 under pr1.1,the Anna update, but after updating to the officially released Belle 609 it now suffers quite badly from the pink screen (greys are pink).
Although it does not really bother me too much I think it shows that the problem to be more software than hardware,which is why screen change repairs often don't work.
Has anybody else noticed this problem?
Also battery life is poorer and phone runs hotter,suggesting maybe a slight software overclock .
All that aside I still love my N8 and Belle.
Moderator's note: Post edited because it contained information about unofficial ways to update the device software. Doing so might void the warranty of the device, and possibly damage it. Therefore it is not allowed to discuss about unofficial update methods on Nokia Discussions forum.

Did you use a higher screen brightness setting with Anna than now with Belle?
If you did, the pink screen issue might be more noticeable.
What screen brightness setting are you using now?

AppWorld Updated-Now BlackBerry ID Locked Out

Today AppWorld prompted me to update to a new version. I did the update. When I rebooted and opened AppWorld again it said it needed to download a new BlackBerry ID. It did the download and I rebooted again. Now when I try to use AppWorld it says my BlackBerry ID has been locked out for security reasons. I can log in via the web just fine and even reset my password.
Anybody else seen this?
John
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

This appears to have worked:
If the password for a BlackBerry® ID account has been forgotten and the login is unsuccessful, please use the following process to reset the password.
To generate a password reset email, please follow these steps:
Browse to the following location using the BlackBerry browser or desktop browser:http://blackberryid.blackberry.com/bbid/recoverpassword
Enter the BlackBerry ID email address and the CAPTCHA characters, then click Submit >
A confirmation message will display A password reset email has been sent [email protected], at which point, a reset email will be delivered to the BlackBerry ID email address.
Note: For security purposes, this reset email will NOT be delivered to the BlackBerry smartphone.
To reset the BlackBerry ID, please follow these steps:
Login to the email account associated to the BlackBerry ID using the desktop browser or the browser on the BlackBerry PlayBook
Locate the BlackBerry ID password reset email in the inbox and select the link within the email
The BlackBerry ID reset email will come from [email protected] If the email is not found in the inbox, please check your spam folder.
When the password reset page loads, enter the new password along with a confirmation of that new password. Then click Submit >
A confirmation message will display once the changes have been saved successfully

Problem WiFi while iPhone 4S is in screen lock

I bought an iPhone last week, and I've realized that when the iPhone screen is locked wifi disconnects.
If I have also connected 3G, the 3G connection appears, and if I have not connected 3G is none connection.
And in milliseconds reappears wifi icon again.
Is it normal?
Thank you very much.
*I heard something about it, but it happened in old iPhones.

I can't call !!
Today or Tomorrow I will try to go to an Apple Store.
Anything new?

Iphone update now usb screen lock

Similar Messages

Maybe you are looking for