Iphone upgrading problem

hello! i was trying to upgrade my iphone from 3.1.3, but for some reason it keeps getting stuck during the update.. it's not showing any error, just not continue for hours... I tried dfu mode, and still nothing...
what can I do? I can't use my iphone:\

Do you have the latest version of itunes? Have you tried resetting the phone before you start an update?

Similar Messages

  • IPhone upgrade problem

    I'm trying to install the latest iPhone software on my Mom's iPhone. (I'm doing it via iChat screen sharing.) iTunes keeps on giving an error -3256 during the download of the 2.0 software. Any idea why this is happening? Is there a way to download the software outside of iTunes? (Even though I know it will need to be installed via iTunes?)
    All of her software is up to date.
    Thanks.

    Seems the problem went away...

  • I interrupted my iphone upgrade to ioS 6 and now my phone just keeps showing the apple. it wont restart or show up when I plug it into itunes!!!!

    Help! i accidently interrupted my iphone upgrade to ioS 6 and now my phone wont turn on completely. it just keeps showing the apple. it also wont register with itunes...i have tried turning it off and restarting it multiple times but nothing is working. HELP!

    hey man, i feel your pain... here's my story and i'm pretty sure this will work for you... on the 19th of september i went to upgrade ios 6 and paused it about 1/10 through... when i plugged my phone up at night the screen was at the normal lock screen.. when i woke up at 10:30 am i went to check my phone and the screen appeared as an apple logo with a progression bar about 6/10 full.. it didn't seem to be progressing any more, but i guess that was only because it was so slow trying to download over wifi because it had all night to finish downloading.. anyways i needed to check my texts and the time so i held down the lock button and the phone turned off during the download.. when i tried to turn it on the apple logo would appear like normal trying to boot up.. then it would fade away and cut off.. then seconds later try to turn on again, by itself, repeatedly for hours on september 20. i tried restarting it (holding lock and home button down 10-15 seconds) but the problem with that is that the phone was already trying to turn on itself so it never would restart correctly... (continued turning on and off by itself).. i went to verizon and they said my phone is screwed.. go to apple if you wanna pay.. i called apple support and a lady helped me out here's the solution that worked after hours of thinking my phone is totally screwed.. when the phone is dark and cut off.. press and hold the home button before you plugin your sync cable to your usb port.. (have itunes up and ready) continue holding the home button and plugin the sync cable.. still holding the button, wait for a message from itunes appear that says it recognizes your device in recovery mode.. press ok.. the screen on your iphone should be a snyc cable and and arrow pointing to an itunes symbol... from there it is pretty self explanatory.. you will need to restore and update your phone from there which should be an option after you press ok... it takes awhile.. your phone will then go through one, or maybe a few progression bars (it may vary, not sure).. while your itunes will be restoring software & firmware.. when everything is done on itunes and your phone.. your phone should boot right up!!! reply if you have any more questions.. i'm so glad i resolved my issue today.. good luck!

  • Sold 4GB iphone upgrading to 8GB Some questions?

    Sold 4GB iphone upgrading to 8GB and was wondering what troubles if any i might run into?
    Once i recieve the 8gb model can i just switch sim cards? that way my 8gb will have evrything my 4gb had on it and the person i am selling it too will have a sim card that hasn't been activated ?
    Anyone know of any problems i might have? maybe having to restart my 2 year contract with at&t for some reason?
    Any help would be great
    Thanks

    jbonante wrote:
    Once i receive the 8gb model can i just switch sim cards? that way my 8gb will have everything my 4gb had on it and the person i am selling it too will have a sim card that hasn't been activated ?
    Anyone know of any problems i might have? maybe having to restart my 2 year contract with at&t for some reason?
    Good question.
    I believe that your SIM card should be interchangeable between your old 4GB iPhone and your new 8GB iPhone. Of course, if you take your SIM out of the old 4G what will the buyer of your 4G use for a SIM card to get started - are you planning to give him the non-registered SIM from the 8G that you get?
    If not, how do you expect him to get a SIM card unless you expect him to have to buy one from AT&T?
    I think that if the old SIM works, there should be no need to restart your two (2) year contract but first the old SIM needs to work.
    Let us know what happens.
    mikeab

  • Hello, I sent my iphone 5 problems to swap in one of apple stores in orlando ... I saw that today was the launch of 5s, and I wonder if I will already deliver again?

    Hello, I sent my iphone 5 problems to swap in one of apple stores in orlando ... I saw that today was the launch of 5s, and I wonder if I will already deliver again?
    I sent for exchange account have accidentally broken the display ...

    If you sent an iPhone 5 in for service/replacement, that is what you will get back from Apple.  Replacement iPhones are not upgrades but identical in specifications to what you sent in.

  • IPhone 6 problem

    I bought iPhone 6. And the camera on the lock screen isn't working properly anymore. When I swipe up, the camera starts but the screen turns black within less then a second.
    On the iPhone 5s of my father (upgraded to iOS 8)it's work. but  in My iPhone 6 doesn't  work seems to be iPhone iOS problems.
    Has anyone else experienced this problem?
    iPhone 6, iOS 8.1.1.   Please help me out friend I bought in 800€.i m really tired with brand new iPhone

    Hello Amritbhandari1,
    Thanks for the question. Based on what you stated, it seems like there is a problem with camera from the lock screen only. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade?

    Dear wise & wondeful people:
    How can I get missing contacts, notes, calendar dates and reminders that are just on my old iphone onto the iCloud for transfer to my new iPhone upgrade? Half of my contacts, notes, ect. were on my iCloud so have happily moved to my new iPhone but the rest are completely resistant. For example, on my iCloud I have 14 missing contacts starting with the letter A alone, however they are happily viewable on my old iPhone 4S and won't budge over into the iCloud.
    There are also 3 notes missing yet still acessible on my onld iPhone 4S, the list goes on.
    Your help would be most appreciated. Thank you so much.
    BCHR

    Hi BCHR,
    If you are having issues transfering your content from your old iPhone onto iCloud so it can be transfered to your new iPhone, you may find the following articles helpful:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
    http://support.apple.com/kb/HT2109
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/TS3998
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/TS3999
    iCloud: Notes overview
    http://support.apple.com/kb/PH12081
    Regards,
    - Brenden

  • DSL and 9.1 to 9.2 upgrade problems?   Please Help!!

    I have a Beige g3 - 300 w/ 160 megs of memory - using Netscape 7.02 and occasionally Gatesmess IE-5. I have had dial up for 5 years and recently upgraded to DSL w/ Linksys WRT54G router connected via ethernet cable. Wifes HP laptop uses the wireless.
    Problem is when connected to the internet, I get a looong -(30 - 40 second) delay between selecting the url and the page loading with a "resolving host" message at the bottom of the page. The modem send light flashes every five seconds or so and once the system locks on the url it loads really fast. With the dialup there was no delay in finding the url but took a long time to load. Result is it takes about the same amount of time to browse now as before. I don't think the winbox is having the same problem.
    To try to resolve the "resolving host" issue I have been trying to upgrade from 9.1 to 9.2. When I download the package from apple.com at the end I get a 127 error which reestablishes itself everytime I click OK til I force quit the System. When I restart the computer, the file is on desktop OS 9.2 update.smi. First I opened the file w/ stuffit 5.2 and tried to install it following the instructions (sharing off, OS 9 extensions only etc) and about 4 minutes into the process I get the Bomb error 10. I have downloaded this three times and upgraded the Stuffit to 7.03 but am having the same problem. In order to get to 9.2.2 you have to upgrade to 9.2.1 first and that is what I am doing.
    Anybody have any ideas either on the "resolving host" issue or the upgrade problem.
    Thanks in advance,
    Beige g3 - 300mghz 160 meg memory   Mac OS 9.1.x  

    Thanks Grant.
    I read the article and it was of some help. Reference TCP/IP control panel settings. I called Commspeed support and they gave me their three current DNS numbers. I typed them per article and nothing - dead. Called them back and they gave me the typical winbox answers "No hable apple" so left to my own devices and considering the stratigies suggested in the article I did two things.
    I opened the TCP/IP control panel and deleted the Name Server Address - As they are supposed to be assigned by the server. There was also a check box that said use 802.3 which was checked. I unchecked it and tried the internet. Blam it was right there. I don't know which stratigy worked as I did them simultaneously.
    Still don't know about upgrading to 9.2.
    Thanks again,
    Bill
    Beige g3 - 300mghz 160 meg memory Mac OS 9.1.x

  • Is there a way to get my current 3G iphone upgraded to 3GS without buying another iphone?  Thanks

    Is there a way to get my current 3G iphone upgraded to 3GS without buying another iphone?  Thanks

    No.

  • Unicode kernel upgrade problem in XI server

    Hi
    I'm trying to upgrade the Brtools in XI server and getting the following problem:
    rx2n0v4:xdvadm 23> SAPCAR -xvf DBATL640O92_45-10002837.SAR
    stderr initialized
    processing archive DBATL640O92_45-10002837.SAR...
    --- Unicode interface [u16_get.c line 233] pid = 6963 :
    Invalid UTF-8 encountered by fgetsU16 (fileno 0x4)
    fd
    Characters previously read:
    0043 0041 0052 0020 0032 002e 0030 0031
    0052 0047                      030 0031
    --- Unicode interface -
    End of message -
    Illegal byte sequence DBATL640O92_45-10002837.SAR
    Couple of times, i downloaded the kernel today and tried but get the same error. Here XI (6.40)is the unicode server and i downloaded the unicode kernel from sapnet (brtools and SAPCAR kernel). I tried with version 7.00 kernel but get the same problem.
    Any solution of this problem?
    Regards
    Amar

    Confusion About SP16 Unicode Kernel Patch/Upgrade
    Problem with updating XI 3.0 (Kernel etc.)
    Check this might be useful.

  • Need information on how to upgrade from 10.5.8 to make computer compatable to iphone upgrade of 11.5.1

    hi everyone:  I require some information on how to upgrade from 10.5.8 to make my mackbook pro compatable
    with the iphone upgrade. Please note that I have gone thru the upgrades on this computer and it tells me there are
    no new ones available...... I need to get my upgrade past the 11.5.1 level.....so do I need to purchase a new
    upgrade program....and if so which one...as I have been thru the apple store and so far as i can tell
    the ones that are listed such as maverik, lion and snow lepard are not high enough. 
    To anyone who replies, thankyou so much for taking the time to help me.  It is truely appreciated.

    11.1.5 is likely to be the version of iTunes you are being asked to run, not the version of Mac OS X.
    To get a higher version of iTunes, you likely have to upgrade Mac OS X. All Roads lead through the 10.6 Upgrade, available as a physical DVD only, from the Apple Online store for about US$20:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    This is one of the most benign Upgrades Apple has ever issued. The size of the Operating System gets smaller, performance is slightly faster, and very few Applications are left behind. If you have some older PowerPC Applications, you may need to ask to install the Optional Rosetta emulator for PowerPC code when you install.
    Once your 10.6 install is fully Updated to 10.6.8 using Software Update, the Mac App Store will appear, and future upgrades (if needed) will be handled through variations of online purchases.

  • I m trying to send a email and sms alert using php and it works fine on all systems except on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india. plz help

    I m trying to send a email and sms alert to people and it works fine on all systems expect on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india.
    the code i m using is right below,plz have a look and not into the problem as problem is a bit strange.
    $headers = "MIME-Version: 1.0\n" ;
                $headers .= "Content-Type: text/plain; charset=\"UTF-8\"\n";
                $headers .= "X-Priority: 1 (Highest)\n";
                $headers .= "X-MSMail-Priority: High\n";
                $headers .= "Importance: High\n";
                // Additional headers
                $headers .= 'From: Rakesh <[email protected]>' . "\r\n";
                foreach($disemail as $email)
                    $to = $email;
                    $subject = $succMessage['email_subject'];
                    $message = $smsText;
                    mail($to,'=?UTF-8?B?'.base64_encode($subject).'?=',$message,$header);
            if (stripos($_SERVER['HTTP_USER_AGENT'], 'MSIE') !== FALSE) {
            $smsText = utf8_encode($smsText);

    i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
    would like to have your thoughts though.
    $headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n  format=flowed Content-Transfer-Encoding: quoted-printable";

  • Does the iPhone 4S problem of reducing the signal quality? ("capture of death")

    Does the iPhone 4S problem of reducing the signal quality? ("capture of death")

    You make no grammatical sense.

  • With the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

    with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

    We are users here.  We cannot possibly know when a new update will be available.

  • Iphone upgrade file is too large for my network space

    Hi
    Does anyone know how to set the disk location that itunes uses for non-music files. My network space is too small for the next iphones upgrade and I can't download it.
    cheers

    Your network space is smaller than 240MB? If it is, that's the smallest allocated space I've ever heard of! Besides, when the update becomes available, you'll be downloading it from Apple's servers directly. If your asking for a place that you can store and then update from, you just have to hold the SHIFT key on a PC or the OPTION/ALT key on a Mac while pressing UPDATE or RESTORE and it will allow you to find the firmware file on your primary C drive or wherever you've placed it.

Maybe you are looking for