IPhone USB audio only sometimes works

I decided to plug my Logitech H760 headphones into the USB adapter for my iPhone 4s.
The music app works perfectly.
The phone app however, does not.
The microphone on the headset seems to be the input for the sound to a call, but the output is still through the iPhone's built in speaker.
I wish the output to be through the headphone speakers.
Thanks.

Goto Control Panel/Hardware and Sound/Managa Audio devices window and confrim that whether USB device and Soundboard of your system are enabled in Recording devices Tab and are listed as seperate devices or not.
FMLE take enteries from Recording devices Tab

Similar Messages

USB audio hardware: what works with iBook 366 clam and OSX 2.8?

I just bought a Behringer UAC202 USB audio interface. My iBook will recognize that it is attached and will give me audio 'out' settings, but it will not configure any audio 'in' settings. It works fine on my iBook G4 with OSX 4.11 however.
Is this a Behringer problem? Do I need to use OSX Panther on the old iBook? Is there a problem with the old clamshell's as far as USB audio in?
Anyone know a cheap USB audio hardware that works in this case? I want to dedicate this great old machine to some easy audio useage.... using the Polar RAM looper instrument in Digital Performer..... and nothing else..... I'm not recording audio to my hard drive..... just want to get audio in and out of the iBook to and from Digital Performer.
Thanks!

Driver support in Panther is pretty limited with regards to newer hardware as far as i've experienced. If there isn't any drivers offered, either by the company or via third party, then you may be stuck.
The only way that i get audio in on my Blueberry iBook is with the Apple iMic that i picked up at an Apple Store a few years ago. It works fine under panther, tiger and leopard.
Good Luck
Vince

USB audio DAC stops working after suspend

I didn't update my mediacenter running arch for a few months so I figured i'd reinstall it because of the filesystem, /lib and grub changes. Now after reinstalling I'm running into the issue that my USB audio DAC stops working after a suspend.
After a suspend speaker-test gives me the following error:
[user@mediacenter ~]$ speaker-test -c 2
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1068:(snd_pcm_dmix_open) unable to open slave
Playback open error: -77,File descriptor in bad state
I've tried replugging my DAC and restarting ALSA, without any success. I have to reboot to get sound again.
Output of /var/log/pm-suspend.log
za jul 21 19:20:24 CEST 2012: performing suspend
Initial commandline parameters:
za jul 21 19:22:06 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux mediacenter 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 0
bluetooth 190551 3 rfcomm
rfkill 15604 1 bluetooth
r8169 49386 0
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
snd_usb_audio 93519 2
snd_hwdep 6300 1 snd_usb_audio
snd_usbmidi_lib 18744 1 snd_usb_audio
snd_rawmidi 18479 1 snd_usbmidi_lib
snd_seq_device 5300 1 snd_rawmidi
snd_pcm 74958 2 snd_usb_audio
snd_page_alloc 7217 1 snd_pcm
snd_timer 18966 2 snd_pcm
mei 32152 0
snd 58997 9 snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_seq_device
usb_storage 44760 0
uas 9285 0
i2c_i801 8180 0
microcode 12185 0
iTCO_wdt 12813 0
coretemp 5654 0
iTCO_vendor_support 1929 1 iTCO_wdt
crc32c_intel 1987 0
joydev 9991 0
soundcore 5410 1 snd
mii 4123 1 r8169
firewire_ohci 31677 0
firewire_core 51552 1 firewire_ohci
pcspkr 1899 0
serio_raw 4653 0
processor 26567 1 acpi_cpufreq
crc_itu_t 1363 1 firewire_core
evdev 9754 5
ext4 424175 3
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
sd_mod 29239 5
cdrom 35648 1 sr_mod
usbhid 36430 0
hid 85477 1 usbhid
ahci 20549 4
libahci 20023 1 ahci
uhci_hcd 23404 0
pata_jmicron 2480 0
pata_acpi 3408 0
ata_generic 3295 0
ehci_hcd 41026 0
libata 167611 5 ahci,pata_acpi,libahci,ata_generic,pata_jmicron
scsi_mod 132974 5 uas,usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 uas,uhci_hcd,snd_usb_audio,usb_storage,snd_usbmidi_lib,ehci_hcd,usbhid
usb_common 954 1 usbcore
i915 438144 4
video 11307 1 i915
button 4502 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10936 1 i915
intel_gtt 14047 3 i915,intel_agp
drm_kms_helper 33051 1 i915
drm 208958 5 i915,drm_kms_helper
i2c_core 20369 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
total used free shared buffers cached
Mem: 3721220 336284 3384936 0 16624 156204
-/+ buffers/cache: 163456 3557764
Swap: 265068 0 265068
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
za jul 21 19:22:07 CEST 2012: performing suspend
za jul 21 19:22:22 CEST 2012: Awake.
za jul 21 19:22:22 CEST 2012: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /etc/pm/sleep.d/90alsa resume suspend:
ALSA lib pcm_dmix.c:1068:(snd_pcm_dmix_open) unable to open slave
aplay: main:682: audio open error: File descriptor in bad state
/etc/pm/sleep.d/90alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
za jul 21 19:22:23 CEST 2012: Finished.
Output of aplay -l
[user@mediacenter ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: DAC [USB Audio DAC], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
What I'm noticing is that after a suspend "Subdevices: 0/1" gets changed to "Subdevices: 1/1".
Any help is much appreciated!
Last edited by Quaith (2012-07-21 17:33:59)

Odysseus wrote:
Unless you can find a way to stop XBMC from using your DAC, I would try hunting down the update which broke it and file a bug report with the appropriate project. https://wiki.archlinux.org/index.php/Do … g_Packages.
I suspect it would be the kernel.
Yes I am suspecting the kernel as well. I'll try to change some options in XBMC to maybe get this working, and if not I'll see how far I can downgrade with the kernel. My last installation was a few months old so I hope it broke not that long ago.
Thanks for the help

USB Audio Interface not working anymore

I have a Presonus Audiobox USB Audio Interface. Worked perfectly until I updated to Mavericks, now I get a screeching noise when used and the sound switches to the built in Mac sound.
So then I reboot and it does it again. The Audio box doesnt have any software since its a plug and play. Any help?

Hi ketpiano!
I have an article here for you that may help you resolve this issue:
Macintosh: Solutions for noise in the audio signal
http://support.apple.com/kb/HT2743
Thanks for using the Apple Support Communities!
Cheers,
Braden

USB-Audio does not work correct on T430/T530

Hi all!
I'm owner of a T430 and a T530. Both are new PCs where I have installed Windows XP. The reason for XP is that I own older software and hardware, which is not supported on Windows 7. But it works fine and I have no reason to change hard- and software as long it fulfills my requirements! And Windows XP runs fine and fast on the T430 and T530.
Only problem is an EgoSys USB Audio interdace U2A. It is possible to install and run it, but there is a problem in the communication between operating panel and the hardware. When I move the slider for the level, the level jumps instead a smooth increase of the level, which means not alle values of the slider are transferred to the hardware. There is a similar behaviour with checkboxes: there are states of the U2A which are indicaed with LEDs. When I change the checkbox, sometimes the LED changes, sometimes not. This errors happen very frequently but not reproducable.
I tried several settings in the BIOS, like disabling one CPU, hyperthreading, USB3 etc. I tried the U2a also on a fresh XP-intallation without other software, but all without success, the behaviour of the U2A is always the same!
I also tested with an ExpressCard with USB-port from LogiLink, but this card does not recognize the U2A at all.
Up to now I have used the U2A on many different PCs without problems. What might be the reason that it does not work on an ThinkPad? Up to now I was very satified with the U2A and I would not like to replace it!
regards
GKap

Hello faith67baillie,
Welcome to the HP Forums!
I understand there is no sound from CDs or your Music folder. I will do my best to help! First, I require the following information, and clarification of the issue:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Mario
I worked on behalf of HP.

USB audio suddenly stops working

It's really weird. Regular audio output works fine, but if I plug in a USB audio device it will work for about a minute and then stop. I can reproduce this reliably with both a Griffin iMic and a C-Media USB audio widget. Once the device has stopped working, if I unplug it and plug it back in it wiil work for another minute or so and then stop again. This only started happening in the last week or so. Before that it was working fine for months. AFAIK I haven't changed anything. I haven't done any major software updates, and I'm not running any new applications.
Also, while it's not working, it's not off 100%. It seems to have something to do with the audio driver. If, for example, I do this at the terminal:
say hello world ; say hello world ; say hello world
I will hear "hello ... hello ... hello ..." (where the elipses indicate about a second of silence).
If I do:
say hello ; say hello ; say hello
then I just get little blips of sound.
Has anyone seen this problem before?

Good Morning
Greetings from Babar Ali
I have hp 2000 laptop & i m facing alot of problems but recently it have audio problem, and its giving errer that( Windows Media Player encountered a problem while playing the file ) some time its working some times not so i will have to restart.
Kindly suggest me what i should do
thanks
kind regards

IPhone 4S audio only playing through my iPod dock

My iPhone 4s audio is only working when I play it through an external device, such as an iPhone dock or the bluetooth output in my car, but it will not play audio through my external speakers or through a pair of headphone. Where the volume bar is at the bottom of the music app, it appears gray as if it is plugged into an external device when it is not. Hopefully someone can help!

Hi MSavageXIV,
Thanks for visiting Apple Support Communities.
If you are not hearing sound from your iPhone when using headphones, start with these troubleshooting steps:
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
If you do not hear sound from the built in speaker, try these steps:
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
You can find the articles with these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Best,
Jeremy

USB Audio Device sometimes not detected. udev, maybe?

I am using an external usb audio device which I usually keep plugged into my machine. I am finding that this device is sometimes not being detected when I boot the computer.
When this happens, issuing the following command:
$ aplay -L
does not list this particular device. Plugging and unplugging the device does not seem to help.
What does seem to resolve the problem is unloading and then reloading the snd_sub_audio kernel module. This is done by issuing the following commands:
# rmmod snd_usb_audio
# modprobe snd_usb_audio
Could anyone give some insight as to why the usb audio device isn't being detected and why this only happen occasionally? Could this be a udev issue? The device in question is an M-Audio Fast Track Pro.

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

MacBook Pro USB ports only sorta working...

Both USB ports on my MacBook Pro have stopped being recognized. I can still synchronize my iPhone, but cannot use thumb drives or external hard drives. I've tried all the previously suggested remedies to no avail. Other thoughts, please.

Hey deanfromjensen beach,
Thank you for visiting Apple Support Communities.
That is odd that your USB ports are working to sync your iPhone but not working with thumb drives or hard drives. Do USB keyboards or mice work?
There is an article for help troubleshooting USB in Yosemite.
OS X Yosemite: If a USB device isn’t working
Also check the troubleshooting in this article:
USB and FireWire Quick Assist - Apple Support
Please let us know how it goes,
Nubz

Satellite M40: USB Audio doesn't work properly in ACPI mode

Hi all,
I just bought a Satellite M40 laptop which purpose will be to be used as a mobile audio system.
For that, USB audio devices are a great solution.
Unfortunately, although it was working properly while recording (sound is perfect with all USB Audio compliant devices I could test), there's an issue in Playback as I got lots of clicks and pops.
After lots of tryings and google searches, I fixed the problem by switching from ACPI computer to Standard PC mode.
That's a workaround.
But this way, I don't know anymore what's my battery status, and my laptop do not shutdown automatically.
In fact, my laptop is no more managed as a laptop :(
I suspect a very serious issue in one of the Toshiba components management. Especially, I would not surprised to be told that power management leads to some regular short system freeze, and thus the 10ms USB audio buffers fall into underrun.
This would not bother me so much if I was not part of the technical support team of a company that is also launching some new USB audio products that will fail to work properly with laptops.
My question is :
Is there any driver / bios update that gets rid of this issue ?
If someone from the Toshiba technical support wants to handle this issue directly with me, I would be pleased to help him, as I'm concerned professionnaly and personnaly.
Thanks in advance.
[Edited by: admin]

Thanks for your help Jeffrey,
But
- I checked with several USB audio devices, from different providers. The issue is the same.
- I checked with several applications (Winamp, MediaPlayer, ...). Same issue.
- I checked these devices with different laptops (tried 3 different models) : I have NO PROBLEM.
- The USB devices I use do not need external power supply. I tried EDIROL UA-25 which works perfectly in any case, but not with my TOSHIBA M40.
- I agree that some application can disturb audio management. But in that case, I would like to know which one from the standard installation is the cause, so that I can fire it. It's anyway curious to see that switching from ACPI to Standard mode fixes the issue, as all applications are still there. I would say the applications are not the issue, then.
- All Microsoft updates have already been installed
- I think I tried everything that could be done by closing applications, changing power management modes, system cache, ...
- I have no other hardware device connected/installed (printer or whatever)
- RECORD works perfectly. So if some application layer was disturbing, I would bet it would bother in Play and Record as well.
CONCLUSION : Unless someone can prove it (and I'm ready for some testing), I still believe there's a harware/driver layer that is faulty in the Toshiba management.
And I don't need to contact the manufacturer, as I AM one of them :)
If you are part of the Toshiba support, let me know. Maybe we can investigate together.
FYI : I had to create a new user ID for this forum as it did not accept the one I created this morning anymore :(
Thanks anyway.

Google Services/Sites only sometimes work on Firefox

I also have been experiencing the same problem as the OP. Google services including Google Search, GMail, and YouTube are all intermittently inaccessible through the most recent version of firefox on my MacBook Pro running OS X 10.6.8. Additionally, sites that use Google APIs also hang (sometimes) when they try to load.
This is frustrating to me because I depend on these services for much of what I do on the web. It is especially frustrating because Firefox has been a dependable and useful browser for me for years. I have had to start using chrome as a workaround but would really prefer to stick with Firefox.
I have identified this problem as specific to firefox, as I have no issues with the Google services in Chrome or Safari. I am also always able to get normal pings to https://www.google.com and https://www.gmail.com through Network Utility on my Mac.
I have tried all of the above solutions including - clearing the cache and cookies (like a zillion times by now) - disabling and deleting all add-ons - starting firefox in safe mode - deleting firefox and reinstalling from a freshly downloaded dmg - manually deleting the user profile for firefox from Library - Changing the manual proxy setting to NO PROXY in firefox preferences - removing all trusted add-ons from firefox preferences - Pushing RESET in the about:config dialog - Resetting my modem/router
I tried to adjust the keyword setting in about:config but when i searched for it it was not present. I wonder if this is part of the problem.
Additionally I have removed the Auto-update files that google software like google earth use to call home to check for updates.
None of these have resolved the issue. I still can only sometimes access Google services using firefox. If I am logged in to GMail using Firefox, i will at some point lose connection and be unable to reestablish the connection for an indeterminate period of time.
This problem has been going on longer than a week or two, maybe a month. I don't know what to do to resolve the issue.
I believe there must be something broken in the way Firefox handles requests for google sites that I have not yet been able to reset or change.
Please, if anyone has found an actual, permanent solution, respond to this thread.
Thanks!
(this seems to be similar to the problem described in another Mozilla support thread: https://support.mozilla.org/en-US/questions/963648 )

as an update, I wanted to add that when firefox gets stuck, in the status bar at the bottom, it will usually say that it is trying to load ajax.googleapis.com (or something like that).
I have also started opening the console in firefox (cmd+opt+k) to watch the behavior of sites when they load. Under the network tab in console, google type sites will take 76000+ ms to load. i am only beginning to use the console and don't know exactly what to do with it yet, so i will be experimenting and updating as i learn more.
if i experience a loading hang with a google site in firefox, clearing the cache/history does not work. however, it seems like if i quit and restart firefox, the google site will then load. i am unsure whether this "clears" something in the browser or just gives the connection enough time to fix whatever is causing the hang.
other possibilities: in console it seemed like one of the delayed site attributes was a javascript from google (a .js file) - it took 70000+ ms to load. perhaps there is a problem with javascript?

Kmixer shows intermittently USB audio mixer(It works,too!)

I am perplexed by the sudden appearance of the USB audio mixer option.
It isn't always present in KMIX.
It has a PCM output volume control
It has an input option but no input shown.
Does anyone else have the USB Audio option in KDE?

I have found a use for the USB mixer in KDE.
If it stays loaded in KDE KMixer I'll be satisfied.
The trick is to enable XMMS with a .wav selection. Click on the O option on the left side of the XMMS display: select.....preferences.
Select Output Plug-in ALSA.....
Select ...Configure....
Select under AUDIO DEVICE ...USB Audio (hw1,0)
Select Mixer Card ...1 and PCM
Click OK
This provided stereo audio from .wav files on the usb Soundwave Optical 5.1 device connected to a USB port on my system while using XMMS. This device has a stereo output jack and an optical port.
At the same time, another .wav file was possible simultaneously( even the same .wav file) on the PCI audio channel from the normal KDE mixer and PCI card using other multimedia devices(kaboodle, noatun).
I do not have any device for 5.1 surround which is optically provided by the soundwave device(probably not properly addressed for it in the system anyhow).
Maybe this will help someone with their USB audio connect?

Video cable for the Iphone 3G - audio only, no video output to TV

I have been reading that with the iphone 3G you HAVE to buy apples video cables in order to play back video on your TV, is this true?
I just got a cable for christmas and it isn't officially licensed by apple and the video does not output to the TV, only the audio. I hope this isn't the case, but maybe it is true??
If my cable isn't working because of some need (forced on us by apple) to only use "apple" cables I will never purchase videos from itunes. It seems rather trivial to have to buy proprietary cables for more $$ in order to buy videos from itunes doesn't it??
In other words... Give us more money so you can keep buying things from us.
Sorry, I am a bit frustrated.
Message was edited by: zstevek
Message was edited by: zstevek
Message was edited by: zstevek

Let's be constructive:
BUT WHY doesn't it work? and how can we fix it/make it work?
my cheap 'non apple' video cable works fine initially, then a message pops up about it not being an 'offcial' cable or some such, then asks if I want to enable airplane mode (both with or without it already disabled), and disables video out completely. Contrary to the many others that have overpaid for your proprietary cables; I'm NEVER EVER EVER EVER going to pay you for your atrociously overpriced cables, because you're action of 'disabling' 3rd party cables is monopolistic in any sense, destroys any hope competition in this area, hinders innovation by third party peripheral developers, and is downright unamerican imho because it does so. You've gone to far this time apple! I've come to the conclusion, you obviously don't care about functionality, as your hardware is almost always overpriced, proprietary, good looking junk, and you keep shaking my pockets for more money with your overpriced accessories and constant barrage of itunes streamery.
Anyway, how can I use my device to do video out on this officially licensed apple dock I have? It doesn't seem to work; and I paid a lot of money for it. If there isn't a solution; maybe you should give out refunds for all the devices that now don't work? Thanks

PulseAudio, USB headset - Mic sometimes working...?

I need someone to help me debug a problem I have with the microphone on my USB headset sometimes not working; The level indicator in pavucontrol does not show up - if I switch between Digital Duplex and Off a couple of times, its hit or miss if it shows up or not. When the level indicator shows up, the mic works perfectly, when its doesn't show up, it doesn't work at all.
Anyone had this issue before?

Ok, seems like it's not as easy as that.
Today when I booted my computer, I am unable to make the microphone work what so ever. It could still be as easy as a concurrency problem in Pulse when configuring. But it seems unlikely that I am the only person with this problem?

Usb audio devices not working

just updated to os x mavericks only to find my Roland fa 101(firewire soundcard) and my Access Virus Ti (usb synth /sound device) (running cubase studio 4 ) are not working ,had a quick read up and as far as I can tell its something todo with CoreAudio2 and class 2 USB sound devices ,I was wondering if apple are planning to fix this issue asap as I need this kit working ,
Cheers

Hey man, there are a bunch of us with the exact same problem!
The recent 10.4.10 update has totally F**D up our alesis interfaces,
we are P**D off and apple hasnt even acknowledged a problem. The is a longer thread you need to check out here:
http://discussions.apple.com/thread.jspa?messageID=4884775&#4884775
All we can do is complain to apple and wait. It S**KS bad.
But, there are heaps of us who are outraged. you can make a complaint to apple here:
http://www.apple.com/feedback/garageband.html
or here: http://www.apple.com/feedback/mac/tm.html
I encourage you to complain man, they need to know!

IPhone USB audio only sometimes works

Similar Messages

Maybe you are looking for