IPhone use to connect to a Linksys WRT54G v5. router but now it won't go to Internet. Updated firmware of Router.
Hello. We have 3 iPhones at my work and for a long time we could connect through WIFI with a wireless Linksys router. Now it won't get us to the Internet. I have updated the router's firmware. The iPhones can see the connection but the Internet won't work. I have played with some of the settings in the router but I don't think I know enough. Please help.
If you think it might need a charge, then use the Wall Charger to charge it up a bit.
Reset, hold at same time Home and Power buttons for about 15 seconds until iPhone restarts itself. See if everything is OK.
If not, you can try to Restore. If the iPhone is OFF, then hold the Home button as you connect the iPhone to computer with iTunes open. Keep holding Home button until iTunes detects iPhone in Recovery Mode. Restore Firmware.
If the iPhone is ON, then connect iPhone to computer with iTunes open, and hold both Home and Power buttons until iTunes detects iPhone in Recovery Mode. Restore Firmware.
Similar Messages
-
I really need my phone, it hardly ever gives me any trouble. This is pretty much the first time.. I hope any of you can help me. It would mean everything to me.
Try a different cable.
Try a different charger.
Try a different USB port on your computer.
Try restoring it using iTunes. -
I have an old iphone 2g/3g. However I dont use it as a phone but as an ipod. Since its the oldest version, I tried updating it to the newest version that all the iphones seem to have. I tried to restore it but now it's stuck on the connect to itunes menu. An error appeared with the error #: 1015. What should I do. Getting a new one is not the answer Im looking for. What should I do?
The 3G stops at iOS 4.2.1 does not support abve that level .
Nothing you can do -
Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks
Yeah, it´s happening in normal 3g coverage area, in fact, i used the 3g to download the iOS but after installing it, the phone doesn't get the 3g anymore.
I tryed the reboot pocess, but it didn't fix it
I haven't tryed the restore to factory settings process,
Is there a way to downgrade to iOS 5.1 again?
Thaks -
I have a iPhone 3G that is running 3.1 and about 2 days ago, it was fine, connecting to wifi and everything. But now, it won't even find any networks? I've tried going to public places (I.E. McDonald's) and other places that have free wifi, and it can't detect the wifi, Why won't my phone find my home wifi now? I've tried resetting the network settings, I've reset the entire phone, i've done about everything all the other posts talked about. Anyone else got an idea?
I have, yes. I've been shutting it down by holding the sleep/wake key and the home button, aswell. Then I go in and reset network settings and I just get back to it not finding any wifi around. It has the little searching sign, but it just keeps going with nothing showing up.
-
Hi I'm using my wife's email for my apple Id but now she has got an iPhone we r both using the same one ive tried gettin my own using my own email but it keeps telling me my email is already in use how can that be????
Are you trying to set up your own iDevice and that is why you want your own Apple ID?
Do you realize that any content that you have already purchased using her ID will still have to be used if you want to update apps or download purchases again for free? ITunes and App Store content is tied to the ID used to make the purchase. Furthermore, if you use her ID to download a purchased app for free on your own device, you can lock yourself out of your ID for 90 days.
Back to the question at hand .... Did she use your email address as the rescue email address for her Apple ID? -
I have an iPhone 3gs, and I downloaded ios 5.1 through iTunes, but now its telling me to activate my iPhone with a sim card, and I never had one.. Help!
I used an old sim card to try to activate my iphone 3gs, it didnt work, and it gave me this response:
We're sorry, the iPhone you connected may be damaged and cannot be activated for service. We reccomend you visit your nearest apple Store for more information. -
I have moved my music to my new mac air but now it won't sync with my ipod or my iphone 4s
I have transferred mymusic to my new mac air from an acer laptop via an external hard drive and it's all there on the mac but now itunes won't sync with my ipod touch or my iphone 4s.
With the ipod it says 'iTunes could not connect to this iPhone. Could not connect to the device " It also doesn't show up at all in the devices section.
With the iphone it says there isn't enough space to sync even though I have experimented and unticked various things including photos which takes up a lot of space. It seems like it wants to sync with the empty space on the iphone (very small!) and not with the whole thing. I have tried various things suggested on this forum but have had no luck.iOS: Device not recognized in iTunes for Mac OS X
Also see:
If you connect the iPod to another computer does iTunes not see it?
What version of iTunes is installed?
Whast model iPod and iPhone and what iOS version?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
For the enugh space, you are trying to sync too much media to the iPhone -
I have the iPhone 4, and yesterday I synced my photos onto iTunes, but now I have albums on my phone that cannot be deleted, and there is not an option to delete the items in the albums individually... How do I get rid of these unwanted albums? Using Windows 7.
If you used iTunes to get the photos on the phone, then use the same iTunes and uncheck the music you don't want and do another sync.
-
So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?
If you're on windows try the following:
This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
1. Quit itunes
2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
4. press ENTER
5. Reboot your machine
6. Restart itunes & connect device to sync
7. Good luck -
I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated
Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al -
I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?
I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots. -
My ipod touch 4th gen used to only charge when it was completely off, but now a week or 2 later i am having to wrap my charger around my ipod to make it start charging but soon enough that still isnt charging.
Any help?
Thank youReset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If nothiing above helped, restore the iPhone to factory settings > Use iTunes to restore your iOS device to factory settings -
My HP Photosmart 6520 won't print from my chromebook. It use to, but now it won't. Please help!
Hello,
Is your printer connected to a wireless network with Internet access?
Do other web services work on the printer? Meaning, can you use ePrint or the Printables on the front panel? (printables = apps on the printer like Disney, Menu Planner, Quick Forms, and so on.)
Miles
HP Employee -
I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!
What happens when the iPod is plugged in? anything? any errors?
Why is 50GB of music gone? All music should exist on the computer. Only a fool would rely on a single device which could easily be lost or stolen to store their content on.
Maybe you are looking for
-
How to change the defaut xmlparser on OC4J Standalone 10.1.3.4 for Spring 3
Hi All I am trying to use OC4J 10.1.3.4 standalone with Spring 3.0 but I keep getting the error nested exception is oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'It worked fine when I was using Spring 2.5.6 I have
-
I've installed Photoshop Elements 12 from a CD onto my PC laptop. I'm thinking about buying a tablet, so was wondering if (a) can I install on a 2nd device (b) can I use the serial number online as I won't beable to install from a CD, and (c) will I
-
In the View Responses functionality
In the View Responses section of a form, can I make the options for a datapoint a dropdown field rather than a free form field?
-
ReportViewer Control Layout for Duplex Printing
I have been looking around for a solution to this. What I need to do is print out postcards in Landscape mode in a 2x2 format. With careful sizing of the tablix control and the Body, I have accomplished this such that it will print this way. The pr
-
WebServices Client on Weblogic 8.1 using HTTPS
Hi All, I have created a custom keystore file based on the SSL certificate obtained from the browser and then importing it into a java keystore file using the keytool. I am trying to do something like this: System.setProperty( "javax.net.ssl.trustSto