Iphone used to connect to internet site when email had reference to the site and I requested it. iphone stopped doing this. How do I get it to resume doing it?

iPhone 4 used to connect to internet site when email had reference to the site and I requested it. iPhone stopped doing this. How do I get it to resume doing it?

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

Similar Messages

When I upgraded to FF4, the "refresh" and "MSN" button disappeared. Where are they, how do I get them back?

The "refresh" button and the button for my homepage appeared on the line just under the Menu Bar. Also, the MSN icon appeared on the fourth line under the Menu Bar. All three are now missing How do I get them back, or do I have to uninstall FF4. Why does an upgrade have to change toolbars without giving me notice?

You can find the Home button at the far right end of the Navigation Toolbar.
Firefox 4 uses a combined Stop/Reload/Go button that is positioned at the right end of the location bar. 
During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button. 
If you type in the location bar then that button becomes a Go button. 
You can middle-click that Reload button to duplicate the current tab to a new tab.
To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
* Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
* Drag the Reload and Stop buttons to their previous position to the left of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.

I upgraded the iphone software to 4.2.8 and none of the purchased apps would open. I then restored the software and now all those apps are GONE. How do I get them back?

I upgraded the iphone software to 4.2.8 and none of the purchased apps would open. I then restored the software and now all those apps are GONE. How do I get them back?

I have EXACTLY the same issue. I would appreciate the response also. Was not prepared for this.

The Web of Trust has reported my website as an attack website. Someone hacked into that site and I have since cleaned it up. How can I get a good WOT rating again?

How do I contact Firefox and other browsers to give my website clearance after it has been hacked and determined not safe?
Currently, my website www.balancingchanges.com comes up with a WOT warning. I have not made any changes to my site for nearly 2 years, but when I looked in my folders, someone had added some files in April 2010. I have since deleted those files and changed my FTP password.

See '''''Next steps''''' at the bottom of this page. 
http://safebrowsing.clients.google.com/safebrowsing/diagnostic?client=Firefox&hl=en-US&site=http://www.balancingchanges.com/
For WOT see this: 
http://www.mywot.com/en/support/faq#site-reputation

In previous version, when typing the keyword "gmail" or "ebay" or "amazon" firefox went directly to the webpage, but in version 4 it stops at google. how do I get it to be like the old one?

it was so convenient before, and how I got most people to convert to Firefox - just type in the keyword, like "ebay" or "hotmail" and firefox found the webpage for you.
you say firefox 4 is faster, but now I get redirected to google first, which in version 3 only happened if Firefox wasn't sure of the right homepage.
how do I get it to be like the old one? if not, I think I'm going back to version 3. which was a lot faster because of this.

The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
[http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]

I keeeep getting an error when I try to play the movie saying QT cant open or installl plug in how do I get all my movies that says this to play in QT?

How do I get the movie to play when it's saying QT can't play because of files not support but they have the mov extension

How do I get the movie to play when it's saying QT can't play because of files not support but they have the mov extension
The MOV file extension simply refers to the file container. In this case, the MOV file container is the "generic" QT container that may contain any valid audio/video compression combination compatible/support on the system that created the file. For instance, if the movie was created on a system with FCP installed on it, that originator of the file may have used a compression codec not available on your system if you do not also have this application installed. The same holds for similar codecs like MPEG-2, DivX, XviD, WMV, etc. In some cases the codec may even be a legacy codec which will run in QT 7 but not the QT X player app.
In short, your best approach is to determine what audio and vide codecs are involved and then see if they are supported on your system. You can normally do this by checking the Finder Info window for the file or opening it in an alternative media player that supports playback and checking that app's media info window. For instance, the VLC media player supplies its own codecs and therefore does not rely on your system's QT component configuration.

I tried to install 8.0.1 but when I tried to open the application it refused because I am non intel so how can I get back to the previous application which I lost?

to install I had to replace an older version which ran on non intel hardware. I cannot find the older version on my pc. Can I download a previous version?

Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''and''''' OSX 10.5 or higher.
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
'''''The good news''''' is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
*Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
*'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

I lost all my bookmarks when I upgraded to 3.6.8 and Firefox was not at all helpful. How can I get my bookmarks back?

I tried the torbutton suggestion from firefox, but there was no torbutton or explanation of how to get one. I installed a torbutton and that did nothing. I am at a loss.

See:
*http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
*http://kb.mozillazine.org/Lost_bookmarks

My Firefox window used to be about 3/4 of my screen width but after crashung and restarting is now full screen width. How do I get the Firefox window back to 3/4 screen width?

I don't want my Firefox browser window to be the full screen width. How do I adjust the browser window width?
Thank you.

This can be a problem with the file [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
Delete localstore.rdf or rename the file to localstore.rdf.sav in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] to test if the file is corrupted. 
See http://kb.mozillazine.org/Corrupt_localstore.rdf 
(caution: do not delete the localstore.rdf file in the Firefox program installation folder)

When I open Safari I get a ipad giveaway hoax that locksup the system and I cannot do anything but close safari, how do I get past this hoax?

Not sure how to get around a hoax about winning an Ipad, cannot click away to a new page, the home page no longer loads etc... All I can do is open and close safari. Three seperate windows open up, two that talk about the Ipad and one little box that says click here to accept.

Which OS X version are you running?
To prevent the loading of the nasty stuff, try this -
Click the Safari icon in the Dock, then immediately press and hold Command-. (Command-periodkey). This should allow Safari to load and run, but prevent it from loading any specific page.
Then go to Safari's Preferences (in the Safari menu) and check your Homepage setting. You may need to redo it.
Before going anywhere on the web, I would also clear the History.

Have set Yahoo Mail as my mailto yet when I try to "send a link" I get a Yahoo sign in page and am then taken to my inbox. How can I get an email box to send the link?

I can't get Firefox to send either photos out of Picasa or "send a
link" using my Yahoo!Mail option. Have set Yahoo as my default
and have set Yahoo as my mailto using tools/apps. When I
use "send a link" I am sent to my Yahoo sign in page and it takes
me to my inbox. How can I get a blank email form to come up?

Typing in additional text seems to get the job done. This seems to be a feature of the latest IOS update, I have never had the problem before the last update.
I use the box with the arrow just to the left of the URL block at the top of the page to send myself links to pages of interest. Adding the extra text seems like a pointless step, but it does work.
Thanks.

My ipod nana library is on a computer we no longer have connected to internet. When I plug my ipod into my wife's computer i only see her library. How can I access my library using my wife's computer?

My ipod nano library is on a computer we no longer have connect to internet. When I plug my ipod into wife's computer all I see his her itunes library. I want to use my wifes computer to get to my library. How can I do this? thanks

never mind. New Itunes seemed to have solved issue.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings? I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

While updating the software from 6.1.3 to 6.1.4 on iPhone 5, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in.

While updating the iPhone 5 software from 6.1.3 to 6.1.4, the power failed. iTunes had just finished the backup and was beginning the software update. Now the phone screen says to connect to iTunes but the phone is not recognised when plugged in. Using Windows 7 and phone not recognised by computer, let alone by iTunes.
Any suggestions? Happy to take it off to the the Apple genius people but would prefer to get it running myself.
Regards.

Try this
iOS: Device not recognized in iTunes for Windows

Iphone used to connect to internet site when email had reference to the site and I requested it. iphone stopped doing this. How do I get it to resume doing it?

Similar Messages

Maybe you are looking for