IPhone Videos on TV - Have Audio but no Video

I recently bought the composite cables for iPhone and hooked them up to my TV so that I can view my videos on it. However I can hear the audio but I cannot see any video on it. I have 4 composite outlets on my TV and I have tried them all. My DVD player plays video on all 4 outlets fine though.
Music plays fine, obviously I do not need video for that.
At first I thought that the yellow composite cable was defective, so I brought it back to exchange at the store, twice. No luck with the other two cables either.
I have tried both NTSC and PAL outputs although I'm pretty sure my TV is NTSC.
A lot of my videos were converted from .avi format to .m4v format. None of the videos were purchased from the iTunes store. Is there something wrong with the conversion? Is there any particular settings (fps, sampling, etc.) that I should convert my m4v files in? Should I just have converted them to .mp4 instead?
I'm just about to buy a Composite to S-video converter so that I can see if I can use that outlet for video instead. But before I blow $30 on it, can anyone let me know what I'm doing wrong?

Are you sure you got the "new" cable? I have a cable that plugs into the earphone jack that works with an older iPod, but had to purchase the newer cable to use with my iPhone. The new cable plugs into the usb/sync connection on the bottom. I think it is also possible you may have been sold an older cable that plugs in this way as well. You should check the packaging to see which specific models it is compatible with. If it is not the cable that Apple sells there's a good chance this is your problem.

Similar Messages

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
H.264 video should be supported by your basic Snow Leopard operating system. The DVCPRO HD family of codecs is part of the Apple "Pro" codecs package which is normally installed as part of a "Pro" video editing suite installer or contemporaneously installed separately as part of one of the newer pro editing apps like FCPX. if you already have one of these pro suites or apps installed or available, then re-install the correct codec package that is missing. If not, you will need to purchase a Pro suite or app to be able to install the required codec package.

Why do I have a black sreen when I try to watch a youtube video. I have sound but no video and if I click on the black screen firefox crashes.

why do I have a black sreen when I try to watch a youtube video. I have sound but no video and if I click on the black screen firefox crashes.

Also update firefox to version 23, you are currently on Firefox 3.6.
* [[Update Firefox to the latest version]]

My videos on iPhone 4 do not have audio but my voice memos do. Help!!

My recorded videos do not have audio. My voice memos have no issues. Anyone have suggestions??

make sure that you are not covering the mic on the bottom of the device and top (opposite of lock button) when recording a video.
Other than that, back up in iTunes and RESTORE firware for a clean slated version of the ISPW

I just purchased Premiere 13 and the video files won't play in Windows Media Player. I have audio but no video. What can I do? I have Premiere 12 and everything works fine with it.

What can I do?

Bonan
Premiere Elements 13 on Windows 8.1 64 bit
What are your export settings for this finished video from Premiere Elements 13?
For example - are you using
Publish+Share
Computer
AVChD
with Presets = MP4 H.264 1920 x 1080p30
or something different like
Publish+Share
Computer
MPEG
with Presets = MPEG2 1920 x 1080i30
or something different ....
We are going to have to get at your export settings which gets us to the properties of the finished video that you are trying to play in Windows Media Player.
If you take your finished video from Premiere Elements 13 and import that into a new Premiere Elements 13 project with Add Media/Files and Folders,
does it import into the new project. And, when the video is in the new project, does it display video and have audio in the Edit area monitor?
We need more details of the properties of the finished video. Knowing that you have no problems with this matter in Premiere Elements 12 and that
the finished video plays in CyberLink are important, but they do not help to figure out what is happening in 13 so that it does not happen again.
ATR

Flash player worked for months but now I have audio but no video / Windows 8 / Help

Flash player worked for months. But today suddenly the video part stopped working. So I have audio and a blank screen. This is across all applications: youtube, live streaming, etc.

To help troubleshoot we'll need the following system information:
Operating system
Browser
Flash Player version - http://adobe.ly/wNzNAu
Web Page URL
Steps to reproduce
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows - http://adobe.ly/KShBWi
Mac - http://adobe.ly/16Odlzb
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5 video - http://bit.ly/ahzL63
Non-HTML5 video - http://bit.ly/cqNb3w

Can Connect to PC AIM Users and Have Audio but No Video, But Worked Before!

Hi all,
I know this has been answered a thousand times in a thousand ways, but I still can't make it work. I purchased a MacBook with built-in iSight using OS X 10.4.11. For the first three months of use, I logged into AIM through iChat and was able to chat with any user using both audio and video with absolutely no problems whatsoever. Now, I can still connect to other users but they only receive audio from me and no video while I still have a video display at my end. In other cases, I can't connect whatsoever. I am not using a Firewall, so there should be not port issues. I have not once changed my settings from the time that they worked until now. Neither have my chatting companions (most of whom are on PCs, by the way). I am on the same ISP using the same modem.
I have tried every setting change in the book. I have deleted the preferences file. I've opened up ports when I don't need to. I am completely, utterly at my wits end, since video chat is one of the few things that keeps me sane in a long distance relationship.
What's gone wrong?
Help? Please?
Erin

Hi,
Use this FAQ http://discussions.apple.com/thread.jspa?messageID=607640&#607640
Run Repair Permissions and then Run the Cron Scripts.
MacJanitor is free.
If Leopard run each (Daily, Weekly, monthly) indiviually.
10:27 PM Thursday; December 13, 2007

Music Videos in iTunes have audio, but no picture

Recently, I noticed that when I click on a song in iTunes, the audio for the song will play, but not the picture. I have found, however, that by going to View > Video Size, and then clicking on any of the sizes, the picture for the video will appear, but I don't want to do that every time that I want to watch a music video... I'm just looking for a way for me to watch videos by simply double-clicking on the name of the video.
Also, I would like to note that my music videos work perfectly fine on my iPod, it is only iTunes that I'm having a problem with. The only things that I can think of recently for having anything to do with this would be either upgrading to iTunes 8.2 or buying several new music videos.

OMG Kevin thank you so much, I was having the exact same problem and was advised by iTunes Store Support to uninstall iTunes - with a 38 CD backup that would have taken some time, your fantastic solution has saved me so much time - THANK YOU!!!

MP4 files have audio but not video

Using Premiere Pro CS6, I have no video when importing clips shoot with the new Canon HF G30. The clips are shoot in 1080P @ PF25 (25P). The audio is fine, but there simply is no video. Importing AVCHD clip from the same camera has no problems. Any suggestions as to how I get these clips imported with both video and sound?

Here they are:
MP4:
And the AVCHD:
Remember, I have tried importing both clips in Premiere Pro CS6, and the MP4 clip shows no video. The AVCHD clip does.

Audio but no video on .mov files

I'm trying to watch a tutorial disc (working with Ableton Live). The video files are .mov, the disc comes with the install for Quicktime 7.03. I have Quicktime Pro 7.12. When I try to play the video files, I get audio but no video.
When I try to play the files in VLC Player, I get video but an audio error (and no audio)...
Anyone familiar with this issue (I've searched the forums and found similar issues, but nothing the same as this...)?

Nothing about Sorenson 3 (video track) AAC (audio) or Apple BMP (image format layer) that would keep the file from playing on your machine.
Do you open these .mov files directly from the CD (double click) or is there some app that is used from the CD to play them?
Try a double click and test the files while logged in under a different user account.

Trying to play videos from my iPhone, i.e; news videos and TED videos. Can hear audio but can not see the video.

Trying to play videos from my iPhone 3G, i.e; news videaos and TED videos. I acan hear the audio but the video is not showing. Any ideas on what I might be doing wrong?

Did you ever solve this. I have not figured it out yet. best.

I have windows 8.1 and the latest version of flash player. I'm getting audio but no video (it just displays a green screen.) How do I get video?

I have windows 8.1 and the latest version of flash player. I'm getting audio but no video (it just displays a green screen.) How do I get video?

Thanks but I found my problem. It was easy oncew I found out the flask player was also called shockwave. My shockwave add-on was disabled. I'm not certain what caused the condition. I was good one day and not getting the error messages the next day. But, I know what to look for in the future if it reoccurs. Thanks again.

Premiere elements 13: I have created a video and it looks fine and sounds fine until I publish. the MPEG has perfect audio but no video,

Premiere elements 13: I have created a video and it looks fine and sounds fine until I publish. the MPEG has perfect audio but no video,
anyone have publishing problems with elements 13?

Premiere elements 13: I have created a video and it looks fine and sounds fine until I publish. the MPEG has perfect audio but no video,
anyone have publishing problems with elements 13?

Having difficulty -- via airplay -- w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

having difficulty - via airplay --w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

What site are you trying to watch? I just tested 3. The you tube app streams from the pad to apple tv fine, as long as the source video format is ok. Checked a site called funny or die.com. Most of the videosmthere stream to apple tv fine. A few have a different format, and do audio only. Netflix does not stream at all, but you can get to netflix directly from apple tv. Whether or not it streams is directly related to the format of the video. Some do, some dont.

Blu Ray Burned in Encore CS4 play audio but no video

I've burned this project multiple times and everytime I get the menus and the audio, but no video when played on a Blu Ray player. The same disc plays fine in computer/laptop. And when I tried a shorter version of the project (10 minutes vs. an hour and a half for the original) it plays fine everywhere. Could the file size be causing my disc not to play in a BD-R player? Then why would it play on a computer/laptop?

More information needed for someone to help
http://forums.adobe.com/thread/416679
Some specific information that is needed...
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html
Odd Errors http://forums.adobe.com/thread/670174?tstart=0
For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
As well as the below, right click the Encore icon and select Run as Administrator... which is NOT the same thing as running the computer with the Administrator account... and which fixes several "odd" problems
Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

IPhone Videos on TV - Have Audio but no Video

Similar Messages

Maybe you are looking for