[iPhone] view does not react

Hey,
i created a view programmaticaly and want to implement some more functionality. Since a few days, my view does not react anymore to events, except for memory warnings and the rotation of the phone. If i touch a textfield for instance, there is no keyboard showing. It is impossible to scroll, but scrolling is enabled as is userInteraction.
Anyone knows this kind of problem and has some ideas? Just tell me what you think might be the reason. Thanks.

No ideas? It would be helpful if u just suggest possible solutions, i am running out of ideas to solve this problem.

Similar Messages

  • My iPhone 4 does not react to anything

    Someone call me and then suddenly turn off the iPhone screen and it stuck to me all the time now and it vibrates as if still call me .. I try to put the iPhone in DFU mode and do restore but it did not get the buttons!
    What can I do?

    Is your iPhone being recognized by a computer when plugged in?

  • ITunes does not react when I plug in my iPhone 4s?

    When I plug my iPhone 4s into my laptop using Windows 7, the phone itself vibrates but iTunes does not react. I have no idea how to add the device to it and have spent hours trying to resolve it. I have also followed an online 7 step and had no effect. Does anyone know what else I have to do?

    http://support.apple.com/kb/TS1538

  • Iphone does not react

    My iphone does not react to anything

    Try resetting it: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release.

  • My brand new iPhone 5c does not allow me to view messages...

    My brand new iphone 5c does not allow me to view messages that I have sent. They simply disappear immediately after hitting the "send" button. Also I am unable to send iMessages. I have tried resetting the network settings and have also tried the hard reset. Nothing works. Help.

    Hi MaddyMontana,
    If you are having unusual issues with Messages on your iPhone, you may find the troubleshooting steps outlined in the following article helpful (apologies if you have already seen them):
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Regards,
    - Brenden

  • Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.

    Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.
    Solutions?

    No, I never really found an easy solution.  I believe it is an issue with some corruption in the iTunes database on the specific device.  In my case, both my iPad and iPhone now show duplicate stream songs if viewed through iTunes on my Mac, but they show different songs.  A couple years ago I had a similar issue on my iPhone, and Apple support suggested I back up the phone, completely reset it, and then restore it from the backup.  It did work, so I imagine it would probably work for my current issues with the iPhone and iPad.  But resetting and restoring an iPad or iPhone always makes me a little nervous that something will get lost.  When I did reset/restore the iPhone, I do have to say, the restore process was 100% perfect and I did not lose any data at all even though Apple support said I might.  If you try to go that route, I would suggest backing the device up both to a computer through iTunes, and to the iCloud so that you have a double backup.
    None of this really resolves the issue with how the iTunes databases are becoming corrupted on the apple devices though, so it is very likely to happen again until they fix it.  I have been unable to determine if there were any specific actions or conditions which caused the corruption to happen in the first place.
    Might be worth another call to Apple support, or dropping in the local Apple store if you have one near by.

  • My password lock cannot be turned off (button is greyed out and does not react) and I cannot set to "simple" password (4 digits) for the same reason (button greyed out)

    Today, I got a message from my iphone 4 telling me that my password was expired and that I had to change it.
    Now I am forced to enter a 8 character long password and I cannot turn off the password lock (button is greyed out and does not react) and I cannot change to "simple" code.
    I am so upset that I am considering throwing the bloody thing to the rubbish bin
    Can you help?

    Have a work Exchange account on your phone? These policies can be enforced by a profile installed on your phone. There is nothing you can do to change this except delete the Exchange account.

  • Iphone 4s does not download emails using imap when connecting to smartermail mail server

    iphone 4s does not download emails using imap when connecting to smartermail v2 mail server.
    when I search - the search results show and i can view the emails, but inbox doesnt download emails - says load more messages x read..
    the folders are displaying ok.
    Smartermail 2 is about 10 years old ( im not upgrading as its working fine other than this issue ) imap is fine with other mail clients.
    has anyone else experienced this?

    Just had the exact same issue on iOS 7, SmarterMail Enterprise 6.8
    https://discussions.apple.com/thread/5462200

  • Adobe Audition does not playback any audio file. He opens it but does not react on the play key.

    Adobe Audition CC does not playback any audio file. He opens it but does not react on the play key. It is after use audio hardware usb wi-fi headphone and return to build-it out. The program don't react now.
    I see problem:
    I am unable to get playback at all in CS6 on Mac. The play button or spacebar will not move the playhead or make sound come out of the foamy things with the magnets. The play button toggles back and forth between green and white, but it isn't working. This is true in both multi track and waveform view.
    Anyone have ideas on what the issue could be? Thanks!
    Some Info:
    MacBook Pro 2.2 i7, 16GB RAM, 512GB SSD
    Mac OS 10.8.3
    Audition CS6 5.0.2 Build 5
    and reply:
    Best bet would be to go into Preferences > Audio Hardware, verify your input and output devices are correct, and probably switch your Master Clock to the opposite setting.  If that fails, we can continue troubleshooting.
    I have the same problem as the author writes. But these actions do not help

    Unfortunately I believe that requires purchasing the new version, and I do
    not have budget approval for such a purchase.
    On Tue, Jan 27, 2015 at 11:34 AM, Charles VW <[email protected]>

  • My iPhone 4 does not flip my screen when I hold my iPhone sideways.

    My iPhone 4 does not allow the screen to show sideways for a larger view of images or a larger keyboard in native apps.  Can anyone help me trouble shoot this??

    Thanks Justin199...it is soooooo simple.  I found the answer elsewhere at the same time you are answering but I am giving you the credit!! Well done and thanks for your swift support!!

  • Table or view does not exist when using in PL/SQL block

    I hav something strange...
    When i execute a query it works just fine... When i use the exact same query in a function i want to create, i get the error 'table or view does not exist'
    I create the function with the same user then when i'm executing the query.
    For example:
    select name,userid from portal.WWLOG_ACTIVITY_LOGS
    if i execute this... it works fine. I get my results.
    However when i create a function:
    CREATE OR REPLACE FUNCTION EBUSINESS.GET_USER_CREATOR (p_userid IN Varchar2) return VARCHAR2
    as
    /*CURSOR c_user_creator IS
    select distinct name,userid from portal.WWLOG_ACTIVITY_LOGS
    where sub_domain = 'user' and action = 'create'
    and name = p_userid;*/
    v_creator varchar2(500);
    v_ret_val VARCHAR2(500) := 'NOT_FOUND';
    BEGIN
    select userid into v_ret_val from portal.WWLOG_ACTIVITY_LOGS
    where sub_domain = 'user' and action = 'create'
    and name = p_userid;
    --v_ret_val := x.userid;
    --end loop;
    -- Is the user in the group or not?
    /*OPEN c_user_creator;
    FETCH c_user_creator INTO v_creator;
    IF c_user_creator%FOUND THEN
    v_ret_val := v_creator;
    ELSE
    v_ret_val := 'NOT FOUND';
    END IF;
    CLOSE c_user_creator;*/
    Return v_ret_val;
    END;
    The table or view does not exist...
    I tryed with cursor, select into, for x in (select....)
    Nothing works.
    A select grant is a select grant right? Are there different grant you should use so you can select it into a function or just do a normal select?
    I also tryed to create a view that just sais select * from WWLOG_ACTIVITY_LOGS but that doesn't work...

    Are there different grant you should use so you can
    select it into a function or just do a normal select? Yes. Grants on objects used in functions/procedures must be given directly to the user, and not through a role.

  • Table or view does not exist - Data Dictionary Import Wizard(Data Modeler)

    Hi All,
    In Data Modeler, Data Dictionary Import Wizard, I'm able to connect to database.But while going to the second stage (Select Schema/Database), I'm getting an error "ORA-00942: table or view does not exist".
    I am able to select the table with select * from all_tables and I can open many tables as well.
    Could anyone tell me, whether I'm missing any privilege, that causing this error.
    Thanks in advance for you support.
    Thanks.

    Hi,
    Thanks for your response, sorry for my late reply as I was away from my place.
    Yes, it is showing "Connection established successfully".
    log file as below-
    2012-08-02 10:37:26,471 [main] INFO ApplicationView - Oracle SQL Developer Data Modeler 3.1.1.703
    2012-08-02 10:39:42,889 [AWT-EventQueue-0] ERROR AbstractDBMExtractionWizardImpl - java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    Pls see oracle version details-
    Oracle Database 11g Enterprise Edition
    11.1.0.6.0
    64bit Production
    Thanks again and waiting for reply.

  • Error in pakcage table or view does not exist but on sql prompt query works

    Hi
    Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0
    The below package compiled in system user and trying to query on view v$session_wait however getting below error.
    PACKAGE BODY SYSTEM.PK_DB_ALERT
    On line: 212
    PL/SQL: ORA-00942: table or view does not exist
    I can execute same query mentioned below from sql prompt from system user and it works fine however it doesn't like from package, Please advice, thank you in advance.
    SELECT SID, seq#, event, wait_time
    FROM v$session_wait
    WHERE event NOT LIKE 'SQL*Net%' AND wait_time <> 0
    ORDER BY 2

    SDD wrote:
    Hi
    Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0Which means package owner is granted select on view not directly but via roles. However, roles are ignored by definer rights packages/stored procedures/stored functions/triggers... You need to grant package owner select on view directly.
    SY.
    Edited by: Solomon Yakobson on Jan 21, 2010 4:06 AM

  • APEX_APPLICATION_FILES: ORA-00942: table or view does not exist

    Hello,
    As my first APEX task I am attempting the upload/download demo on http://download.oracle.com/docs/cd/B32472_01/doc/appdev.300/b32469/up_dn_files.htm
    The ultimate goal is to store PDF files in the database.
    In order to complete step 1: To create an application using the Create Application Wizard:
    - I first created a user from SYSTEM called 'myapp'
    - Next I logged into 'myapp' to continue the exercise. (I am wondering if that is where I am going wrong... If so, please clarify)
    - Knowing that I would want to save the upload to a table I created a table with a BLOB
    I did the steps for the upload and ran the application - no errors to there.
    Next I needed to "To create a report on APEX_APPLICATION_FILES:".
    I started the wizard as instructed. When I pasted the SELECT ... FROM APEX_APPLICATION_FILES, I got the table or view does not exist. A quick review of the TABLES tab shows only the tables that I created. Not any of the system tables or views.
    I logged back in as SYSTEM and reviewed the 'rights' given the user 'myapp'. All were checked.
    I knew nothing of Oracle when I installed XE, so I took defaults or whatever the install doc said to do. Is that part of the problem? It is clear that I do not have rights to see that table, but I also do not see the table when logged in as SYSTEM.
    Any insight appreciated,
    Rick

    Thanks for the reply.
    Version is:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    Database      
    NAME     XE
    CREATED     10/13/2006 08:04:21 PM
    RESETLOGS_TIME     10/13/2006 08:04:25 PM
    Install Version 10.2.1015
    Regarding the code links, this one looks like what I need:
    DECLARE
    l_bfile BFILE;
    l_blob BLOB;
    BEGIN
    INSERT INTO tab1 (col1)
    VALUES (empty_blob())
    RETURN col1 INTO l_blob;
    l_bfile := BFILENAME('IMAGES', 'MyImage.gif');
    DBMS_LOB.fileopen(l_bfile, Dbms_Lob.File_Readonly);
    DBMS_LOB.loadfromfile(l_blob, l_bfile, DBMS_LOB.getlength(l_bfile));
    DBMS_LOB.fileclose(l_bfile);
    COMMIT;
    END;
    Is the 'BFILENAME' function that causes the 'get a filename' dialog box of Windows to open for the user to find which file to upload?
    I'm going off to look for a newer version of APEX, thanks.

  • Iphone 5s does not transmit voice during phone calls

    iphone 5s does not transmit my voice during a phone call.  Just started happening.  The microphone works with Siri and the speaker works fine as I can hear the person I called.

    Hello there, Susina.
    The following Knowledge Base article has some great pointers for troubleshooting your issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for