IPhone vol control doesn't function when on cradle

Is this a BUG? When on the cradle and playing music, the volume control ceases to work as soon as a stereo output plug (3.5mm) is attached to outboard sound.

I'm not sure if I am the first one to notice this but, line-out volume on the iPhone is not consistent and can be affected by the volume level setting prior to connecting to dock.
An example, I have a ipod connector in my car. if I connect my ipod to my car stereo with the volume on the iphone set low, music coming through the stereo is lower. To increase this volume I have to disconnect the iphone and turn up the volume then reconnect.
Also, I've noticed that if I play a youtube video and turn up the volume during video play back and then connect the iphone to my car dock connector the line-out volume is even louder.
I'm not sure if this is because the connector is not designed for iPhone specifically but I've noticed this behavior with most ipod speakers.

Similar Messages

  • I had a problem my iphone 4 mouthpiece doesn't work when i am calling other mobile phone

    i had a problem my iphone 4 mouthpiece doesn't work, when i am calling other mobile phone they can't hear me but i can hear them. But when I am using the skype and viber to talk to other people they can hear me perfectly. and also when I record my voice it sounds good i can hear my voice.. i dont know what is wrong with my phone?

    I get trying to unlock it and it finally accepted the 4 digit PIN number on my SIM Card, which it wasnt accepting before (there is also a super PIN number, which i dont know whats for). And now it says "no service". I am reseting the phone and sometimes it just says "no service" and other times the SIM Card is locked again and it doesn't accept the PIN number anymore...

  • IPhone 5S sounds do not function when on Bluetooth or when plugged in

    iPhone 5S 32GB version 8.1.3
    sounds do not function when on Bluetooth or when plugged in

    8.1.x to 8.1.3
    I will try tonight and see.

  • Tab control doesn't highlight when tabbing

    I have to navigate through my application without a mouse, using the tab key, return key, etc. As I tab through the controls I've noticed that as a control receives focus it is outlined with a black box. This doesn't seem to be true, however, for the tab control. Is there someway I can get the tab control to be highlighted when it receives focus via the tab key?

    There are ways you can do it by using attribute nodes. You can monitor the tab controls attribute node to see if it is in focus, then change color, size, or display the page, etc. Here is an example.
    Attachments:
    Tab_control.vi ‏28 KB
    Tab_controld.png ‏4 KB

  • "Install button" doesn't function when updating to 10.6.1 or 10.6.2

    The main problem is my "install" button simply doesnt trigger any response, it is highlighted and has the click animation but, again, heeds no effects. Nothing happens.
    I recently installed snow leopard and there were quite a few problems but I have read that most of which can by solved by simply installing the updates. This is where the aforementioned problem is such an obstacle in my plight.
    I have downloaded both DMG (6.1 and 6.2) files, repaired my start up disk and rebooted in safe mode and have tried restarted repeatedly for about 9 hours now. I have searched and havn't found any posts or topics with a problem quite like mine. I simply cannot install the updates I have already downloaded.
    It is notable to mention that I downloaded these from the actual apple website not from my "software update" listing because those buttons dont function when I attempt to download an update either. The menu toggles back and from from the option where I hit "continue" and "agree" to the terms, that is to say, that each button activates the page that preceded it to come back up. Its a never ending cycle.
    Please help.

    this may happen if you are using a custom keyboard layout. delete the file /Users/username/Library/Preferences/ByHost/com.apple.HIToolbox.* and log out/in and try installing updates again.

  • My iPhone 5 C doesn't respond when pressing the Home Button, do I need to go to a Apple store or is there another way to fix this problem?

    I bought my iPhone 5 C last week and is still all brand new. My phone was alright thses days but suddendly when i pressed the Home button to get out of an app, it didn't respond and also when i want to see the time I press the Home button but it doesn't show the lock screen. Do I need to go to an Apple Store or is there another way to fix this problem? I have read the Helping Center in the Apple Web but still it didn't help to solve my problem. Can someone please help me?

        Getting your notifications is definitely important and we understand not wanting to miss anything katieb373. You have reached the right place for assistance in getting this working for you again. Has your phone completed any recent software updates right before this happened? You can reset the network settings to see if that will resolve the issue by following the steps http://vz.to/1uO6qTU in the link. Please try this and let us know the results.
    CandiceH_VZW
    Follow us on Twitter at @VZWSupport

  • HT201401 iPhone 5 touch doesn't respond when fully charged

    Hello,
    I have iPhone 5 and there's a problem that the screen touch doesn't work properly when it's fully charged so I have to disconnect it from the charger so the touch will respond.
    Do you know why does it happend?
    Thanks

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Interactivity in InDesign (CS2) doesn't function when exported as pdf to Acrobat

    I am adding 'buttons' / hyperlinks in a CS2 InDesign document to go to another page of the same document. When I save the document as pdf and I open the document (in Acrobat) the buttons are recognized as buttons/hyperlinks because the pointer turns into a pointing finger, but nothing happens.

    May be too obvious but have you checked your export settings? Try sending as Acrobat 7 or something other than the acrobat level you sent at previously.
    I wonder if links don't work because you moved page. What happens if you reapply your hyperlinks at the new page location and then exporting again?

  • My right earpiece doesn't function

    My right earpiece doesn't function when I listen to music, all it can do is pause/ play the next song. But it works on other devices. Is the problem with my earphones or my iPhone?

    Clean any lint/debris from the headphone jack.
    Try a different headset.
    Settings > General > Accessibility > Mono Audio > OFF

  • After updating my iphone 3G and my ipodtouch 3G ios5, universal dock and remote control doesn´t work

    After updating my iphone 3G and my ipotouch 3G with ios5, the apple remote controls (the white and the aluminium one) doesn´t react when iphone or ipod are docked at the universal dock. The remote controls both still work with my Macbook, therefore it must be a problem with the dock. I have tried to connect both with the dock (Menu + left for 6 seconds) but it doesn´t help. Further the volume control doesn´t react on the iphone and the ipod when they are docked. Neither the one on the touchscreen nor the buttons. The day before the update everything was fine. Anyone any idea?
    Thanks!

    Look at the previous posts on the right under the heading: "More Like This".  I appears that others are having the same problem.

  • My iPhone 4S keeps turning itself off when I still have battery life and then it doesn't charge?

    It's only just started doing this and it's really annoying me now!! Ha
    I'll charge my phone up overnight then a couple of hours into the next day the battery wil be down to about 20% then it will say I only have 10% left even though I will have 20% if you see what I mean? And then to top it off it turns itself off and won't let me recharge!!
    It did happen to my iPad the other week but that seems to be fine now.
    I've tried changing and checking chargers etc but they seem to work it other people's and my iPad seems fine now

    Hi there glee154!
    I have an article here that can help you troubleshoot this issue with your iPhone. The article is about troubleshooting a multitude of iPhone hardware issues, and can be found right here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    The specific section you will want to reference can be found here:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • My iPhone screen doesn't move when I turn phone sideways

    WWhen I look at a web page or picture, it stays in vertical position even when I turn phone sideways. How can I fix this?

    Hi Eileen@@,
    If your screen still hasn't been able to rotate, I would recommend you take a look at the troubleshooting information in this article:
    If the screen doesn't rotate on your iPhone, iPad, or iPod touch
    Some apps don't rotate. Some might use only portrait or landscape mode, or switch depending on the content. To test screen rotation, open the Calculator app that comes with your device. If the screen doesn't rotate when you rotate the device, try these steps:
    Check for  in the status bar. If you see this icon, Orientation Lock is on. To turn it off, swipe up from the bottom of the screen to reveal the Control Center and tap .
    If you have an iPhone 6 Plus, turn off Display Zoom to rotate the Home screen.
    If you have an iPad with a Side Switch, turn the Side Switch on or off.
    Get more help
    If you checked your settings and your screen still doesn't rotate when using an app that should (like the Calculator app), follow these steps:
    Restart your iOS device.
    If the screen still won't rotate, back up and restore you
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • IMovie shows up in Mission Control, but doesn't open when clicked.

    Can't open iMovie. iMovie shows up in Mission Control, but doesn't open when clicked. It just disappears up in the top left corner of the screen. The controls on the top of the screen (like; iMovie, File, Edit, View, Text, Share, etc) are al there, and they seem to work, but the window just won't show up.
    It happened after installing Mountain Lion on my Macbook Pro.
    Any ideas?

    Disable screen saver. Restart.

  • I have different account ID's with my iphone and computer. I would like to standardise both to just the one. One of the ID's doesn't work, when I tried to list the second email with the preferred one a message telling me that this email is already in

    I have different account ID's with my iphone and computer.
    I would like to standardize both to just the one.
    One of the ID's doesn't work, when I tried to list this second email with the preferred one a message telling me that this email is already in use pops up.. yes it is, with me??
    Is there an easy to fix this please, Fabfitz

    If the email address you want to use is being used as the primary email address on a different ID you have to manage that ID and change it to a different primary email address.  This explains how: Change your Apple ID - Apple Support.
    If it is being used as an alternate or rescue address on a different ID, you manage the ID and either remove it or change it to a different email address.  This explains how: Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support.

  • My Iphone 5, was backed up and restored.  Music doesn't sync, when reconnecting device each time, it only offers restore or new phone rather than sync option.  Can anyone help please?

    My IPhone 5, was backed up and restored.  Music doesn't sync, when reconnecting device each time, it only offers restore or new phone rather than sync option.  I have reinstalled ITunes but still this hasn't worked.  Can anyone help please?

    This problem started last year when ios 8 was released. I think apple is trying to force users to buy music on iTunes store and that's why it's impossible to sync other music and also that's the reason why they haven't solved this serious problem. That's really disappoints me and i'm angry with apple because i have like 10 gb of music in mp3 and i can't sync music from iTunes to my iPhone.

Maybe you are looking for

  • Unable to create the test suite file

    Hi, I imported a BPEL project to my JDeveloper ver 10.1.3.3.0. When I clicked on the <project name>.bpel, I got the "unable to create the test suite file" error and all the partnerlinks have a bang sign (!). None of the partner link works. Please hel

  • Multi room with 2 Sky+ HD boxes

    We have multi room with one old silver box (which you can record on but it doesn't have 'on demand' options etc that the newer Sky+ HD box has) & one newer box. Both boxes are in the lounge & we then have magic eyes around the house. If we upgrade th

  • First Calendar experience

    My first experience with Calendar was that the program wasn't ready yet and that it was unstable.Yesterday, after several learning attempts and two crashes, I finally produced a Caledar 2006 and sent it to Apple for printing. I couldn't use pictures

  • Importing contacts from hotmail

    Is there a way to import hotmails contacts into entourage? I have saved them as a "comma delimited" (cvs) file, but I can't get any further than that. G5   Mac OS X (10.4.1)  

  • Swf won't load on device - Flash icon with yellow warning triangle and number 9

    I have an internet tablet - the Archos 5. I'm trying to create a swf file that runs on the device. I made a small "hello world" application in Flex 3. When I try to run it on the device I get a blank white screen with a flash icon in the center. To t