IPhone was unplugged during update; now completely unusable, not recognized

So I was updating to the latest iPhone software through iTunes when somehow, the USB got unplugged. Now, the phone is always off; when I turn it on it just has a picture of a USB cable pointing towards the iTunes logo for a few seconds, and then shuts off again. It's comepletely unusable. When I plug it into the USB port, it is recognized in Windows and the computer and all, but it doesn't appear in iTunes, and the iPhone's screen is the same image as when it is unplugged.
HELP PLEASE!!!
No phone + No music = Death.
=[.
Thanks in advance!
--Sarah.

Try forcing your iPhone into Recovery mode.
Disconnect the USB cable from the iPhone.
Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off.
Press and hold the Home button while reconnecting USB cable. When you reconnect USB, the device should then power on.
Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo.
When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message.
This will require an iPhone Restore.

Similar Messages

  • IPhone unplugged during update - Now completely dead

    Hi,
    Yesterday while attempting to update my iphone, the USB cable came loose, disconnecting the iphone. After waiting several minutes, i decided to reset the iphone, and it told me to re connect it to a computer
    I re-connected it and itunes asked to restore the iphone, which i did, however after several minutes of preparing the phone to be restored, i recieved an error 1604, stopping the process.
    I attempted to solve this problem by changing to four different computers, all of which gave me the same result, and i followed the advice on apples support database to no help either (however, I had a great degree of difficulty understanding what to do)
    Any ideas?
    Thanks

    Try recovery mode:
    Eric Hermanson
    Re: iphone 3G is as good as dead
    Posted: 15-Aug-2008 9:33 PM in response to: FH Person
    To enter recover mode:
    1. Turn your phone OFF. If you can't turn it off, FORCE a turn off by holding down the Power and the Home buttons together for 5 seconds.
    2. While your phone is turned OFF, HOLD DOWN the Home button. Keep it held down.
    3. Connect your phone to the USB cable on your computer. KEEP the Home button held down during all this time.
    4. Keep holding the Home button down until you see the iTunes/restore screens appear on your computer and your iPhone.

  • TS4062 my ipod was unplugged while updating now cant get to music or name of ipod wont show up for syncing

    My ipod was unplugged while upgrading..How do I get sync to show up so I can get all my music back on.

    I have a similar issue.
    Mine shows in iTunes and in PC. It will also allow me to sync.
    But when I do sync, it runs fine for about 10 minutes, then I get an error similar to yours with a directory location. It keeps syncing and will periodically show the errors. Then it will lock up.
    I have run chkdsk, awindows utility (chkdsk [driver letter]: /R /F) over the iPod when it has been restored and it found nearly 400mb of bad sectors.
    I though this would fix the problem but is has not. When I run chkdsk over it again, it does not find anymore bad sectors (it does however tell me that it has 400mb of bad sectors logged.)
    I am banging my head against a wall trying to fix this, or even find out what the issue really is. I assume it is a dodgey hard drive, but I do not want to replace it and still have the problem.

  • Help!!! iPhone was interrupted during update 2.0.1

    I was in the process of updating my iPhone when I had a power failure and everything went black including iPhone.
    Now When I do the key press procedure to enter DFU mode I hear the noise and I get the following Error:
    *iTunes could not contact the iPod software update server*
    *because you are not connected to the Internet*
    Make sure your Internet connection is active and try again
    If anyone knows what I should do, please let me know.
    iPhone model A1203

    I have the same problem as is described above.
    I made an appointment with the apple store. The tech performed a full restore of the firmware and all other software. After a sync to reinstall all my music, contacts and apps, I still have the same issues as before.
    Should I save a copy of my itunes folder and uninstall itunes and reinstall it? It seems like a select few Original iphones do not take the 2.0 itunes update very well. My girlfriend's original iphone does not have this problem with v2.0 or 2.2

  • 7th Gen iPod Classic was unplugged during sync, now it pops up in Windows Explorer, but not iTunes. How can I fix this?

    Okay.
    I have a Windows 7 x32 OS, and an 80gb Silver 7th Gen iPod Classic.
    So, I bought an iPod used off of eBay and I recently decided that 80gb was a bit too much, so I was going to resell it on eBay and buy a smaller iPod.
    While I was restoring it to set it back to factory settings, my computer shut off due to a power problem.
    Now when I plug it in, I get a message from windows saying "You need to format the disk in drive :M before you can use it. Do you want to format it?"
    It shows up in windows explorer as a Removable Disk, and it isn't being detected by iTunes. I plug it in the iPod says "Connected. Eject before disconnecting." with a symbol that it makes when it is syncing.
    I've tried putting it in disk mode, and it still will not detect it.
    Can somebody help me? I really don't want to be stuck with a broken iPod.
    If anyone needs or wants any more information before they can advise, please feel free to tell me what you need to know and I will post it!
    Thanks, and have a blessed day.

    Hello b0nvivant,
    Thank you for providing so much information about the iPod issue you are experiencing.  I found an article with steps to take when your iPod is recognized in Windows Explorer but not in iTunes:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Installed Leopard Update, Now Second Monitor Not Recognized

    Is there any way to remove the 1.3 update? I now cannot use my second monitor and when I tried to use time machine, well you can guess what happened. The system froze as soon as I clicked on the icon.
    I just switched to a Mac and I am starting to regret the decision.

    Carl, try a couple things....
    1) Startup your computer holding SHIFT down. This may take a while to startup. When it's done, simply restart again. Test your system.
    2) Zap the PRAM by holding down CMD-SHIFT-P-R as your computer starts up. Release those keys when you hear the second startup chime. Then test your system again.
    3) Repair Disk Permissions using DISK UTILITY in your Utilities folder.
    4) Reset the System Memory Unit by simply shutting the computer down, unplugging EVERYTHING from the computer (specially the power cord) and let it set for 5-10 minutes. Then plug everything back in and restart.
    It will not hurt to try these steps. It's worth a shot. Good luck!

  • HT4623 I tried to update my ipad air to IOS 7.1 but it shows error that "The software for the iphone was corrupted during download" How can I fix this problem ?

    I tried to update my ipad air from IOS 7.0.4 to 7.1 on iTunes. I clicked download and update, it started to download normally but when download finished iTunes shows error that "The software for the iphone was corrupted during download".
    How can I fix this error ?

    I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
    In the terminal (it kept failing to download in Safari):
    curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
    Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
    Quit and relaunch iTunes.
    Should now work for you.

  • TS3694 i was doing update on my apple iphone 3g 8gb during update an error ocured namely 1015. and when i was doing restoration of my previous software version once again error ocured namely 1015

    i was doing update on my apple iphone 3g 8gb during update an error ocured namely 1015. and when i was doing restoration of my previous software version once again error ocured namely 1015.
    and 2nd i have downloaded few free apps like face book twitter etc on my itunes but when iam installing them to my iphone its not installing i dont know why plz help me to install them thanks

    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    Maybe you phone has been jailbroken

  • TS3694 my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

    my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    worth looking at for the future to understand backing up etc

  • Can I recover photos on iPhone 4S not backed up on iCloud or computer when connect to iTunes error shows up on screen. Was trying to update now it must go to restore.HELP!

    Can I recover photos on iPhone 4S not backed up on iCloud or computer when connect to iTunes error shows up on screen? My son was trying to update now it must go to restore. HELP!

    If there is no backup of the device to iCloud or iTunes and the device has gone into recovery mode when trying to update, then the data is gone. If the device was connected to iTunes to do the update originally, it is possible the default backup was done, unless your son disabled it. To check to see if there is a backup, go in iTunes, click on Edit, Preferences, Devices and see if there is a backup listed for the date/time before the update was started. If he was doing the update OTA on the phone, then there is no backup. No backup, no photos.

  • HT1351 My iphone was disconnected during a sinc and now has songs that are grey with a red circle and sqare in the middle of it. None of these songs play. tried deleting all the songs and re sincing but to no avail???

    my iphone was disconnected during a sink and now many songs are grey and have a red circle with a red square in the middle, they will not play

    Thanks, this is not an ideal answer but probably the most sensible one in my case.
    I will try it unless someone has a better suggestion, but I'll wait a bit as it will take me a few days anyway (I had actually tried to create a new smaller playlist or download by album, but at this stage the music app is not letting me queue a list of songs for download - I think I will have to disable and re-enable iTunes match which will probably delete all the songs).
    I have to say I am not very impressed with Apple here - having an online backup of all your data and beeing able to restore it to a new device easily was a strong selling point of iCloud. For music, they are Definitly not delivering at the stage.

  • Cannot Update to IOS 5 - Error Message : The Software for the iPhone was corrupted during download.

    Everytime i connect to itunes and try to update the IOS to IOS 5,
    Get pop up box after agreeing to terms and conditions stating the below,
    The Software for the iPhone was corrupted during download.
    Disconnect and reconnect, then try again. Make sure your network settings are correct and your connection is active, or try again later.
    What could be the problem here?
    Additional Info:
    OS: Windows XP
    Connected to Internet at Work through VPN
    Itunes 10.5 installed
    Latest IOS up to IOS 5 installed
    IPhone synced and backed up
    Tried reconnect/restart pc, but no change
    Also, cannot download direct ipsw file as site blocked from work vpn
    I have updated IPhone IOS previously from the current VPN/Work environment
    Please help someone?

    I am on Mac but have a slow connection (its called 'Narrowband') and have had the same message twice.  It downloaded Safari 5.1.1 to my macbookpro but I hate it (no back button and keeps on crashing) - I'm on Snow Leopard - the initial message is that it will take 10 hours to download.  I may try at work where they have a faster connection.
    However, is there another way to download the Iphone update (and Ipad2)?
    pft44

  • My IPOD was corrupted during updating ITUNES.

    My IPOD was corrupted during updating ITUNES. Now all I get on the screen is USB up arrow ITUNES. What can I do?

    If not successful try the remaining actions of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • 5300 Dead after connection was lost during update

    5300 Dead after connection was lost during update. Won't turn on, power up-nothing. Help?

    It is now dead.
    Take to a nokia care point.
    Care points:
    UK
    http://www.nokia.co.uk/A4228006
    Europe:
    http://europe.nokia.com/A4388379
    Elsewhere:
    http://www.nokia.com and select your country.

  • My iphone was fully charged and now it won't turn on or do anything

    My iphone was fully charged and now it won't turn on or do anything

    I'm sorry, it seems that the problem is that my phone WON'T restore. I just tried restoring again and it keeps giving me the 2001 error. Help.

Maybe you are looking for

  • Problems running  SSL connection using JRUN 4.0/JDK 1.4.2

    Hi, Our project is to run a SSL connection to FedEx. When we test the connection with WebSphere 5.0 test server, it connected and worked. But, when we tested with our environment (JRUN4), exception thrown: The following are the exceptions: ==========

  • How do I get badges to stop appearing asking to re-enter my mail passwords?

    I keep receiving badges asking for me to re-enter my mail passwords. I have went in to the mail settings and re-entered the passwords which are verified, but I am still getting badges to re-enter the password.

  • Alternate to group by clause

    Hi I am using Oracle 8i and one of my queries is getting the data from multiple sources through a dblink from other databases (customer need cannot avoid dblinks). The query is using the group by clause to get the count based on specific columns and

  • Help me please , Only Left side no sound !

    had a ipod 30Gb in xmas, very happy. but T.T yesterday, i found right side is lounder than left side . then a hours later , left side has no sound! i had tested lots headphone and power speak, still can't hear left side. T.T I had tested the music on

  • Lost cd's have serial number

    I lost my creative suite and lightroom discs but found the serial numbers on the programs, anyway I can get these as downloads?