Iphone went into recovery mode after trying to update to 5.1

I went to upgrade to 5.1 and my iphone went into recovery mode and will not work unless i restore it, if i do this will i lose everything!?

dfu mode
How to enter iPhone DFU mode
Connect the iPhone to your computer and launch iTunes
Turn the iPhone off (hold down the power button at the top of the iPhone)
Hold down the sleep/power button and home button together for exactly 10 seconds, then release the power button
Continue to hold down the Home button until a message appears in iTunes telling you an iPhone in recover mode has been detected
When you are in DFU mode your iPhone screen will be completely black
Even though the screen is black, that doesn’t mean the device can’t be interfaced with either iTunes or a custom firmware client (for jailbreaking, etc).
Remember that if you see the restore logo, iTunes logo, or any message on the iPhone screen, you are not in DFU mode but standard Recovery Mode. Again, DFU mode is signified by having a completely black screen on the device. If anything else is the case, repeat the steps above until you enter into DFU mode successfully.
Exit DFU mode on iPhone
The simplest way to exit out of DFU mode is to hold down the Home and sleep/power buttons on the iPhone while connected to iTunes. Then just hit the power button as and this should reboot the device as usual.
And if you’re curious, yes this works all the same on an iPod touch.

Similar Messages

  • IPad and IPhone stuck in recovery mode after trying to update to ios 6

    I tried updating to ios on my Ipad 2 via computer and after the update downloaded a error message appeared my Ipad is now stuck in recovery mode. Is this happening to anyone else? SORT IT OUT APPLE!!!!

    Do you have to restore your iPhone again? You could try uninstalling and reinstalling iTunes. You could also try checking out this link.
    http://www.ipadforums.net/jailbreaking-hacking-tutorials-how-guides/28716-how-re solve-itunes-unknown-error-3194-a.html

  • HELP!!  iPhone stuck in Recovery Mode after trying to update today w/new OS

    Ok my phone is stuck in recovery mode, Ive already restarted my computer & tried to shut down itunes & start it back up, it gets almost done with the restore verification and then it gives me a 1013 or something
    what to do?!
    Message was edited by: PsychedelicWonders

    Don't know if this will help but when I updated to 4.0.2 my phone gave me an error and bricked.
    I made a new user on my computer, installed itunes and then was able to update my phone without it erroring. Once I had a working phone I went back to the old user and updated my phone with all of the information that was there before. I lost a few things but had a working phone.
    Since then I have not had a problem with updating it in the old user. You might see if it will help with you all.
    Message was edited by: Johnna Lynne

  • IPhone 5 going into recovery mode when trying to update iOS 7

    My 5 went into recovery mode when trying to update to 7.0.2 OTA. At first I was like ok just a glitch. Well trying to update to 7.0.3, it did it again. So right now I am again in the process of restoring and updating my 5.
    What is going on?

    because I'm an idiot.. of course.. All my other over the air updates have worked, I had a good wifi connection, knew I had a backup, and was desperate to get past the initial bugs I've been experiencing..
    I downloaded iTunes on my work PC, enough to get it going again, which I bascially had to do twice.. iTunes didn't find a backup and said that iCloud didn't have a backup, even though it did.. So, it did a basic install of iOS 7..  I then erased all settings from the iPhone itself and when it restarted I chose to restore from iCloud which the phone was able to find..
    Have not seen anything better.. I've had a couple random reboots. Once when swiping the Starbucks notification on the lock screen, the phone immediately crashed back to the apple boot screen.

  • Iphone 4 went into recovery mode when trying to restore, only option available now is to "restore and update" however this will not work, how can you restore from a backup once in recovery mode and only option is "restore and upgrade"? Please help!

    iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
    How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
    Please help.

    You don't you must restore your phone first and then you will have the option to restore from your backup.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • HT4236 my iphone 4 is in recovery mode after trying to update and sync to itunes, i was going to try to put the photos over from my phone but now it says i have to restore which will rease all data.. help?? precious phots of my baby!!!

    My iphone phone is in recovery mode after trying to update and sync in order to remove photos from it on to my macbook.  How can i restore without losing the photos?? please help i dont want to lose them!!

    Try holding the home and lock button at the same time and see if it'll restart. If you see the apple logo, let go and wait till it goes to the lock screen and your good(:

  • My iphone 5 is stuck in recovery mode after trying to update it and know it wont sync to my computer to fix it.... help

    my iphone 5 is stuck in recovery mode after trying to update it and know it wont sync to my computer to fix it.... help

    Hello richardayoub1,
    Thanks for using Apple Support Communities.
    If your iPhone is in recovery mode, you will need to restore it with iTunes. 
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Take care,
    Alex H.

  • Phone worked fine today...went into recovery mode. Tried to restore it and got an Error 29 message.  Anything I can do?

    Phone worked fine all day...charged it and it went into recovery mode.  Tried to restore it on 2 different macs and received error 29 message.  Any suggestions?

    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Then...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
         Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Iphone 4 in recovery mode when trying to update to ios and I will not update it because I don't want to lose my information

    Iphone 4 in recovery mode when trying to update it to the last version and I will not update it because I don't want to lose my information
    my operating system is the before last one

    Open iTunes. plug in your iPhone to the usb-port while holding the home button pressed. Your bricked phone should now show up in iTunes.

  • IPhone 3G Stuck in Recovery Mode After Trying to Update to 3.1.3

    I have read through the similar issues posted on here and there have been no definitive answers.
    My dad hadn't updated his iPhone 3G to 3.1.3 yet, so we connected it today and chose to update. It downloaded the update, went through the install on the phone, then went into recovery mode and iTunes says it detected phone in recovery mode you must restore. I tried to restore and it just does the same.
    I have uninstalled/reinstalled itunes, deleted and re-downloaded 3.1.3.
    My dad's computer is Vista 32 that we are doing this on.
    Any help would be appreciated.
    Thanks

    Awesome, thanks!! I actually read on another forum about doing that on an XP computer because Vista and 7 drivers get screwed up for the iPhone, so I just got done doing it on an XP computer and it WORKED!!!!
    Thanks for the reply!

  • HT6058 iPhone put into Recovery Mode after updating to 7.0.4, and now iTunes can't restore it from my computer. What do I do?

    Once my iPhone 4 updated the iOS to 7.0.4, it immediately went into Recovery Mode, with the iTunes symbol. I plugged it into my computer, and it says I need to restore the iPhone. I click Restore, but in says it can't connect because of my network connection. I've followed every troubleshooting issue from the support section related that issue, but it STILL won't connect and download the recovery.
    What do I do to get my iPhone fixed? And why did 7.0.4 cause this?

    Don't worry about that. iPhone stuck in recovery mode always happens when you update the iOS on your iPhone. There are two ways to solve it.
    First is is to put your iPhone in DFU mode.
    Step 1. Turn off iPhone
    Step 2. Hold down the Power and Home button.
    Step 3. When you see the Apple logo, release the power button but continue holding the Home button down.
    Step 4. Open iTunes and wait for it to tell you that it’s in restore mode.
    If DFU mode can't solve the problem, I'm afraid the only solution is to try some 3rd party software, like iPhone data recovery or something like that. You may simply try the tutorial here: How to Fix iPhone that is Stuck in Recovery Mode.

  • My iphone went into recovery mode when updating, is there any way to get my data on my phone back?

    when i was doing the next update for IOS 8.1 my phone went into recovery mode. i was wondering if i could get out of it without losing everything on my phone?

    well if it's in recovery mode, all of the data is already gone. this article mey help you get it working again: http://support.apple.com/kb/HT1808

  • My iPod is stuck in Recovery Mode after trying to Update...

    I was trying to update my ipod 4th gen (ios 6.1.3 or something like that) and it went into Recovery Mode.
    My laptop have Windows XP on it and doesn't allow me to plug anything into the USB thingys. I've tried everything to get them to work, but it won't work.
    I have also tried to do a hard reset on my ipod, and also tried holding down the home & power button until the apple icon pops up then hold one home button for 5 secs or whatever and it won't work.
    What should I do?
    I might give my ipod to a friend and see if her laptop will let me restore it. But it won't be for awhile. /:
    HELLPPPPPPPPP

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPod Touch 4G stuck in recovery mode after trying to update iOS!

    so while trying to update to the newest iOS (6.1), the iPod just went into recovery mode and has been stuck there ever since. When I try restoring it, it always begins "Extracting software.." only to then tell me "The iPod cannot be restored at this time because the iPod software update server could not be contacted or is temporarily unavailable".
    I have tried literally EVERYTHING to restore it but it just won't work!
    Also when I run Diagnostics, everything is fine, except for my iTunes Store connectivity part, where it says that the internet connection failed, even though my Internet works just fine & I can open my browser as well as browse the iTunes Store.
    Someone said to let the iPod drain & then recharge for 1 hour & I'll try doing that now but I don't think it'll help much..
    I HAVE NO IDEA WHAT TO DO ANYMORE  :-( someone please help!

    Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • Ipad stuck in recovery mode after trying to update in ios6

    my ipad is stucked in recovery mode since trying to update in ios 6  any help?

    Hi there rmarr1,
    The only way to get out of recovery mode is by restoring the device via iTunes. If you initiated the update on iTunes on your computer, there may be a back up of the device that created before the update. Take a look at the articles below for more information.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    -Griff W.

Maybe you are looking for

  • HP 5150 printer problem fixed

    I was having a strange issue with my HP printer 5150 and printing Entourage emails that were more than one page long. I contacted tech support at HP via email and was instructed to delete this preference and that preference, unplug the USB to the pri

  • To save PO item text at the time of creation

    Hello Friends, I have a requirement to save PO item text while creating from ME21N.... I need to display the Material Classification(particular characteristics) data in the po Item text.. I have done my coding in the particular User exit.... i am get

  • OCI Database connection

    I want to make a database connection from JDev 10.1.3.1 to an Oracle 9.2 database. I need to connect to a specific schema. If I use the JDBC thin driver I am able to log on the database, but am I not able to reach the schema. I tried to set uop an OC

  • Collection in PLSQL

    Hi All, I would like to use collect (or array) to maintain some pre-defined values, which can be used later in the PLSQL. Here is what I have: ORA-00932: Inconsistent datatypes: expected NUMBER.... Any idea? Thanks in advance, Mike Create Table testC

  • How to write the grec letter "delta"

    Hello In my program java, I want to write the lower case grec letter "delta" in order to do : JLabel lab= new JLabel("delta"), but I don't know how to write the "delta". Please help me, thanks. danfei